LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1988 >> 924 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DME Digital Engine Control >> Diagnosis & Testing >> Reference Mark Sensor Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reference Mark Sensor Check

  1. Using same LED tester as used for testing speed sensor, connect positive lead to CU harness connector terminal No. 25 and negative lead to terminal No. 26.
  2. Disconnect and ground coil wire. Crank engine over. If sensor is sending a signal, LED should flicker dimly.
scientia non olet · About LEMON Manuals