Removal & Installation

TRANS ID - TIPTRONIC

Includes: R&I Engine Assembly (where necessary).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		10.0		C
Combination Procedure: CONVERTER: Drain & Test:
		0.5		C
Combination Procedure: CONVERTER SEAL: Remove & Replace:
		0.3		B
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear		0.5		B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.2		C
Combination Procedure: FRONT PUMP: Remove & Replace:
Front Pump		2.5		B
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
		0.1		C
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
		0.6		C