LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1992 >> 911 Turbo >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> DME Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DME Relay

  1. Disconnect DME control unit connector. Connect a jumper wire between terminal No. 3 (DME relay ground) and terminal No. 24 (ground). See Figure .
  2. Turn ignition on and ensure fuel pump runs. If fuel pump does not run, check fuses, DME relay, Black/White wire to DME relay, Green/Black wire to fuel pump, or fuel pump. See WIRING DIAGRAMS article in the ENGINE PERFORMANCE Section.
scientia non olet · About LEMON Manuals