LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1992 >> 911 Turbo >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Idle Speed Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Speed Switch

  1. Disconnect DME control unit connector. Connect DVOM between terminal No. 24 (ground) and terminal No. 52 (idle speed switch). See Figure . With throttle valve closed, ohmmeter reading should be less than 10 ohms.
  2. Open throttle valve beyond 1-degree opening angle. With throttle valve open, ohmmeter reading should be infinity. If ohmmeter readings are incorrect, measure resistance directly at idle speed switch and adjust if necessary. See ADJUSTMENTS article in the ENGINE PERFORMANCE Section.