LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1994 >> 911 Turbo >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> DME Control Unit >> Ignition Trigger Circuit (Simulation)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Trigger Circuit (Simulation)

  1. Ignition trigger signal may be simulated for trouble shooting ignition. To do so, connect an oscilloscope to ignition coil high tension lead. With ignition off, disconnect DME control unit.
  2. Turn ignition on. Intermittently connect terminal No. 1 (White wire) to terminal No. 18 (Red wire) at DME control unit wiring harness connector. A high voltage spike must be displayed on oscilloscope each time terminals are jumpered.
scientia non olet · About LEMON Manuals