Modify coding

The Tester shows the current coding, and re-coding is possible with the [F8] key.

1. In menu item 'Coding' use the and keys to select the 'country coding' and confirm with the [>>] key.
2. In menu item 'Country coding', use the and keys to select the correct version.
3. Start the coding process with the [F8] key 'Coding'.
4. Wait until 'Coding has been changed.' is displayed.
5. End process with the [<<] key.
6. In menu item 'Coding' use the and keys to select 'ABS/PSM' and confirm with the [>>] key.
   NOTE:

   • Up until diagnosis software number G41 (up to model year 2000), the RPM signal is transferred directly from the ABS control module (i.e. discrete)!
   • As of diagnosis software number G42 (as of model year 2001), the Rpm signal is transferred from the ABS control module via CAN!
   • If the incorrect ABS version is coded, the faults '55, speed signal, front right' and '62, speed signal, front left' are entered in the fault memory, the following functions are also blocked:
   • Manual program
   • Upshift prevention
   • Downshift during braking
7. In menu item 'ABS/PSM', use the and keys to select the correct version.
8. Start the coding process with the [F8] key 'Coding'.
9. Wait until 'Coding has been changed.' is displayed.
10. End process with the [<<] key.

    The 'Coding' menu can now be quit with the key.