LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2000 >> Boxster Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Removing and installing pulse sender >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removing and installing pulse sender: Installation

  1. Install pulse sender. Tightening torque of the pan-head screw (M6x16): 10 +/- 0.5 Nm (7.5 +/- 0.5 ftlb.).
  2. Push in lower plug half on the holder.
  3. Push plug on until it audibly engages.
scientia non olet · About LEMON Manuals