LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2000 >> Boxster Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission, Controls, Case >> Removing And Installing Inner Oil Tube >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removing And Installing Inner Oil Tube: Installation

NOTE: Always replace oil tube and toroidal sealing rings.
  1. Provide oil tube with new toroidal sealing rings and give rings a thin coating of Vaseline.
  2. Insert oil tube into special tool 3381 and push into transmission housing as far as the stop on the special tool. The open side of the special tool should face the outer wall of the transmission.
    Fig 1: Inserting Oil Tube Into Special Tool (3381)
    G03102756Courtesy of PORSCHE OF NORTH AMERICA, INC.
NOTE:
  • Do not tilt oil tube. Drive in both tube ends equally.
scientia non olet · About LEMON Manuals