Door Front, Central Locking System
- Removing and installing door
- Removing and installing inner door release (bowden cable) for door lock
- Removing and installing door handle
- Disassembling and assembling door
- Adjustment instructions for assembly of the door
- Diagram: sheetmetal clips and grommets
- Basic setting of door lock
- Standardising the system
- Fitting the door window in the clamping jaws
- Adjusting the door window angle in the vehicle's longitudinal direction
- Adjusting the door window height
- Adjustment of the door window pressing force on the door seal at the top and sides
- Adjusting the lower stop of the power window unit
- Disassembling and assembling door handle
- Setting the door