Important Notes

The clutch hydraulics must always be filled or bled using a pressure filling and bleeding device. Furthermore, the bleeder valve must be opened sufficiently and the gauge pressure must be approx. 1.5 bar.

Before the system is filled or bled, the clutch pedal must be in the "pedal fully depressed" position.

Important: As there is no system pressure, servo kinematic effects will cause the clutch pedal to move forward abruptly. In order to avoid damage, the pedal must be guided manually.

Bleed the system until no more bubbles appear at the bleeder valve (use a collecting bottle with transparent hose).

If the system was open previously (for example, for component replacement), the minimum filling or bleeding time must be 30 seconds.