Section 38 (Engine)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
- Engine Mechanical
- Technical Data Engine M96/20
- Differences Between BOXSTER 2.5L, 2.7L And BOXSTER S (3.2L) Engines
- Tightening Torques For Engine M96/20 (2.5L), M96/21 (3.2L), M96/22 (2.7L)
- Technical Data For Engines M 96/23 And M 96/24, - As Of My 2003
- Tightening Torques For Engine M96/23 (2.7L), M96/24 (3.2L) - As Of My 2003
- Engine, Crankcase
- Removing Engine, M96/20 (2.5L) With Manual Transmission
- Installing Engine, M96/20 (2.5L) With Manual Transmission
- Cleaning Engine (Washing The Engine) - Engine Installed
- Disassembling And Assembling Engine
- Disassembling And Assembling Positive Crankcase Ventilation
- Disassembling And Assembling Crankcase Halves, Engine M96/20, M96/21, M96/22
- Removing Engine, M96/20 (2.5L) With TIPTRONIC Transmission
- Installing Engine, M96/20 (2.5L) With TIPTRONIC Transmission
- Removing Engine, M96/21 (3.2L) And M96/22 (2.7L) With Manual Transmission
- Installing Engine, M96/21 (3.2L) And M96/22 (2.7L) With Manual Transmission
- Disassembling And Assembling Engine Carrier
- Removing And Installing Drive Belt
- Removing And Installing Deflection Rollers For Drive Belt
- Removing And Installing TENSIONING Roller For Drive Belt
- Removing And Installing Belt TENSIONER
- Disassembling And Assembling Belt TENSIONER
- Disassembling And Assembling Bearing Housing With Crankshaft
- Removing And Installing Crankshaft
- Removing And Installing Pistons
- Removing And Installing Crankshaft Sealing Ring (Engine Installed)
- Removing And Installing Crankshaft Sealing Ring - Flywheel Side
- Removing And Installing Pistons - BOXSTER S
- Removing And Installing Pistons For Engine Type M96/22 (2.7L)
- Checking Piston Wear
- Disassembling And Assembling Cylinder Head
- Removing And Installing Cylinder Head Cover - Engine Removed - As Of My 2003
- Removing And Installing Cylinder Heads
- Removing And Installing Valve Stem Seal
- Disassembling And Assembling Inlet Camshaft - As Of My 2003
- Removing And Installing Camshafts - Up To Model Year 2002
- Removing And Installing Camshafts - As Of My 2003
- Removing Camshaft - Engine Removed, As Of My 2003
- Installing Camshaft - Engine Removed - Includes Adjusting Timing, As Of My 2003
- Removing And Installing Valve Tappets - Engine Installed
- Sealing Cover For Camshaft Housing (Cylinder Head Cover)
- Checking Guide For Valve Tappets
- Removing And Installing Oil Protection Tube - Engine Installed
- Removing And Installing Oil Protection Tube - Engine Removed
- Removing And Installing Valve Tappets - Engine Removed
- Removing And Installing Closure Cap For Camshaft Bore - Engine Installed
- Removing Closure Caps At Pulley Side Of Cylinder Head 1 - 3
- Removing Closure Caps At Pulley Side Of Cylinder Head 4 - 6
- Installing Closure Caps At Pulley Side Of Cylinder Head 4 - 6
- Removing Closure Caps At Flywheel Side Of Cylinder Head 1 - 3
- Installing Closure Caps At Flywheel Side Of Cylinder Head 1 - 3
- Removing Closure Caps At Flywheel Side Of Cylinder Head 4 - 6
- Installing Closure Caps At Flywheel Side Of Cylinder Head 4 - 6
- Removing And Installing Sealing Ring For Intermediate Shaft
- Removing And Installing Solenoid Hydraulic Valve
- Reworking Cylinder Head
- Removing And Installing Hydraulic Valve For Camshaft Adjustment - Engine Installed, As Of My 2003
- Removing And Installing Cylinder Head Covers - Engine Installed, As Of My 2003
- Removing And Installing Bearing Cover For Intermediate Shaft - As Of My 2002
- Wear Of Timing Chains, Sprockets, TENSIONING And Slide Rails
- Checking Camshaft Timing - Engine Installed - As Of My 2003
- Engine, Lubrication
- Recommended Engine Oils
- Removing And Installing Air/Oil Separator
- Assembly Instructions
- Removing And Installing Oil Pan - Engine Installed
- Removing And Installing Oil Pump With Coolant Guide Housing - Engine Removed
- Removing And Installing Oil Pump Cover - Engine Removed
- Disassembling And Assembling Oil Pump - Engine Removed
- Removing And Installing Oil Extraction Pumps
- Removing And Installing Oil-Water Heat EXCHANGER - Engine Installed
- Checking Oil Pressure
- Engine, Cooling