Repair and Diagnosis (Single Page)

You are viewing the full "tree" of links on one page. This can load slowly, but is easier to search. The same page can appear multiple times under a different folder, that is why the page is so large.
View "split tree" where inner folders are split out. where inner links are on separate pages.

Expand All (for easy ctrl-f) Collapse All

• Quick Lookups
  • Common Specs & Procedures
    • Specifications Index
  • Electrical Component Locations
    • Diagnostic Connector (DLC) Locations
      • Domestic Cars
        • CHRYSLER Group LLC
        • Ford Motor Co.
        • General Motors
      • Domestic Light Trucks & Vans
        • CHRYSLER Group LLC
        • Ford Motor Co.
        • General Motors
      • Imported Cars & Trucks
        • ACURA
        • AUDI
        • BENTLEY
        • BMW
        • DAIHATSU
        • CHRYSLER Group LLC
        • FERRARI
        • Ford Motor Co.
        • General Motors
        • HONDA
        • HYUNDAI
        • INFINITI
        • ISUZU
        • Jaguar
        • KIA
        • Land Rover
        • LEXUS
        • MAZDA
        • MERCEDES-BENZ
        • MITSUBISHI
        • NISSAN
        • PEUGEOT
        • PORSCHE
        • RENAULT
        • Rolls-ROYCE
        • SAAB
        • SUBARU
        • SUZUKI
        • TOYOTA
        • VOLKSWAGEN
        • VOLVO
    • Electrical Component Locator
      • Buzzers, Relays & Timers
      • Circuit Protection Devices
      • Control Units
      • Motors
      • Sending Units & Sensors
      • Solenoids & Solenoid Valves
      • Switches
      • Miscellaneous
      • Connectors
      • Grounds
      • Component Location Graphics
  • Fluids
  • Technical Bulletins
    • Campaigns
    • Safety Recalls
    • Technical Service Bulletins
  • Tire Fitment
  • Wiring Diagrams
    • System Wiring Diagrams
      • Using lemon2025'S Wiring Diagrams
      • Air Conditioning
      • Anti-Lock Brakes
      • Anti-Theft
      • Body Control Modules
      • Computer Data Lines
      • Cooling Fan
      • Cruise Control
      • Defoggers
      • Electronic Muffler
      • Electronic Suspension
      • Engine Performance
        • 3.6L
        • 3.8L
      • Exterior Lights
      • Ground Distribution
      • Headlights
      • Horn
      • Instrument Cluster
      • Interior Lights
      • Memory Systems
      • Navigation
      • Power Distribution
      • Power Door Locks
      • Power Mirrors
      • Power Seats
      • Power Top/Sunroof
      • Power Windows
      • Radio
      • Shift Interlock
      • Starting/Charging
      • Supplemental Restraints
      • Transmission
      • Trunk, Tailgate, Fuel Door
      • Warning Systems
      • Wiper/Washer
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
• Accessories & Equipment
  • Anti-Theft Systems
    • 57 - Door Front, Central Locking System -- CARRERA (997)
      • WM 570837 Disassembling And Assembling Key (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Disassembling Key
          • Removing Cover Of Hand-Held Transmitter
          • Removing Hand-Held Transmitter Key
        • Assembling Key
          • Installing Hand-Held Transmitter Key
          • Installing Cover Of Hand-Held Transmitter
      • WM 571119 Removing And Installing Door Handle (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Door Handle
          • Unclipping Electric Wire For Micro Switches
          • Disconnect Connection Piece
          • Removing Door Handle And Bottom Part Of Door Handle
        • Additional Assembly Instructions
          • Locking Lock Actuation
        • Installing Door Handle
          • Fitting Door Handle And Bottom Part Of Door Handle
          • Fit Connection Piece
          • Clipping In The Electric Wire For Micro Switches
        • Subsequent Work
          • Notes
          • Function Test Following Assembly Work
      • WM 571137 Disassembling And Assembling Door Handle (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Door Handle
        • Assembling Door Handle
        • Subsequent Work
      • WM 571719 Removing And Installing Door Lock (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Door Lock
          • Disconnect Connection Piece
          • Removing Door Lock
          • Unclipping And Disengaging The Bowden Cable
        • Additional Assembly Instructions
          • Locking Lock Actuation
        • Installing Door Lock
          • Fitting The Bowden Cable
          • Installing Door Lock
          • Fit Connection Piece
        • Subsequent Work
          • Notes
          • Function Test Following Assembly Work
      • WM 572619 Removing And Installing Striker Pin (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Striker Pin
        • Installing Striker Pin
      • WM 573019 Removing And Installing Door Unit Carrier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Door Unit Carrier
          • Covering Door With Adhesive Tape
          • Removing Seal For Mirror Triangle
          • Disconnecting Plug Connection For Rear-View Mirror
          • Releasing Door Unit Carrier
          • Disconnecting Electrical Plug Connection On Microswitch
          • Disconnecting The Door Lock Electrical Plug Connection
        • Installing Door Unit Carrier
          • Locking Electrical Plug Connection For Door Lock
          • Locking Electrical Plug Connection For Microswitch
          • Fastening Door Unit Carrier
          • Locking Plug Connection For Rear-View Mirror
          • Fitting Seal For Mirror Triangle
          • Removing Adhesive Tape
        • Subsequent Work
      • WM 573037 Disassembling And Assembling Door Unit Carrier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Door Unit Carrier
        • Assembling Door Unit Carrier
        • Subsequent Work
      • WM 573055 Eliminating Symptoms In Body Interior - Replacing Door Sub-Frame (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Gt3, 911 Gt3 RS)
        • General Information
          • Symptoms
          • Causes And Remedial Action
        • Tools And Materials
        • Replacing Door Sub-Frame
        • Working Times
      • WM 574519 Removing And Installing Door Handle (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Door Handle
        • Installing Door Handle
        • Subsequent Work
      • WM 574819 Removing And Installing Crash Support (Except 911 "Sport Classic", 911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Crash Support
        • Installing Crash Support
      • WM 575115 Adjusting Front Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Tools And Materials
        • Adjusting Front Door
          • Adjusting The Front Doors
          • Setting The Door
      • WM 575119 Removing And Installing Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • General Warning Notes
        • Tools And Materials
        • Preliminary Work
        • Removing Door
          • Releasing Hinge Joint
          • Releasing Door Latch Snib On Body Side
          • Removing Door
        • Installing Door
          • Notes
          • Fastening The Hinge Joint
          • Fastening Door Latch Snib On Body Side
        • Subsequent Work
          • Reworking
      • WM 575137 Disassembling And Assembling Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Door
        • Tools And Materials
        • Disassembling Door
          • Removing Lid And Rubber Sleeve
          • Removing Retaining Clips
          • Removing Rubber Pad
        • Assembling Door
          • Installing Rubber Buffer
          • Installing Retaining Clips
          • Fitting Lid And Rubber Sleeves
          • Replacing Insulation For Door
        • Subsequent Work
      • WM 575355 Replacing Door Hinge (On Body Side) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs
        • Removing Door Hinge (On Body Side)
        • Preparing Connection Areas Of The Body For Installing The Door Hinge (On Body Side)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Door Hinge (On Body Side)
        • Preparing Door Hinge (On Body Side) For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Door Hinge (On Body Side) For Installation
        • Installing Door Hinge (On Body Side)
          • Danger Of Injury While Welding
          • Installing Door Hinge (On Body Side)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 575919 Removing And Installing Door Arrester (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Door Arrester
          • Releasing Door Latch Snib On Body Side
          • Removing Door Latch Snib
        • Installing Door Arrester
          • Installing Door Latch Snib
          • Fastening Door Arrester On Body Side
        • Subsequent Work
      • WM 576319 Removing And Installing Rubber Seal For Door - Cabriolet (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Rubber Seal For Door
          • Removing Cover Of Three-Point Seat Belt
          • Removing Rubber Seal For Door
        • Installing Rubber Seal For Door
          • Notes
          • Installing Cover Of Three-Point Seat Belt
        • Subsequent Work
      • WM 576319 Removing And Installing Rubber Seal For Door (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Removing Rubber Seal For Door
        • Installing Rubber Seal For Door
        • Subsequent Work
      • WM 576519 Removing And Installing Rubber Seal For Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Rubber Seal For Door
        • Installing Rubber Seal For Door
        • Subsequent Work
      • WM 577819 Removing And Installing Central Locking Switch (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Central Locking Switch
        • Installing Central Locking Switch
      • WM 578919 Removing And Installing Control Unit For Rear Convenience Systems (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preparing Control Unit For Comfort System Rear
        • Removing Control Unit For Rear Convenience Systems
          • Removing Control Unit For Rear Convenience Systems
        • Installing Control Unit For Rear Convenience Systems
        • Subsequent Work
          • Subsequent Work On Control Unit For Rear Convenience Comfort Systems
        • Programming Control Unit For Rear Convenience Systems
          • Reading From And Writing To The Rear Convenience System Control Unit
        • Coding Control Unit For Rear Convenience Systems
          • Coding The Control Unit For Rear Convenience Systems
  • Cruise Control Systems
    • 27 - Starter, Power Supply, Cruise Control -- CARRERA (997)
      • WM 2700TW Technical Data, Engine Electronics (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. 4 Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO)
        • Technical Values
          • Overview
          • Engine Electronics
          • Engine Electronics Tightening Torques
      • WM 2706IN External Power Connection, Jump Lead Starting (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
        • Preliminary Work
          • Preliminary Work For External Power Connection, Jump Lead Starting
        • General Warning Notes
          • Warning Notes For External Power Connection, Jump Lead Starting
        • Information
          • External Power Connection
          • Jump Lead Starting
        • Subsequent Work
          • Rework On External Power Connection, Jump Lead Starting
      • WM 270601 Checking Battery With Battery Tester (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
        • Checking Battery With Battery Tester
      • WM 270601 Checking The Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • General Warning Notes
          • General Warning Notes For The Battery
        • Battery Handling Requirements
          • Low-Maintenance Battery
        • Battery Central Venting
        • Visual Inspection Of Battery
        • Checking Acid Level Of Low-Maintenance Battery
        • Checking Gravity Of Electrolyte
        • Open-Circuit Voltage Measurement
        • Battery Load Test
        • Charging Battery
      • WM 270619 Removing And Installing Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Battery
        • Installing Battery
        • Subsequent Work
          • Subsequent Work - Battery
      • WM 270655 Replacing Lead-Acid Battery With Lithium-Ion Battery (911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Lead-Acid Battery
        • Installing Lithium-Ion Battery
      • WM 270689 Battery Trickle Charging (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Checking Battery Charging Condition With Battery Tester
        • Reworking
      • WM 2706IN Electrical Emergency Release For Lid (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Electrical Emergency Release, Front Lid
      • WM 2706IN External Power Connection, Jump Lead Starting (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For External Power Connection, Jump Lead Starting
        • General Warning Notes
          • Warning Notes For External Power Connection, Jump Lead Starting
        • Information
          • External Power Connection
          • Jump Lead Starting
        • Subsequent Work
          • Rework On External Power Connection, Jump Lead Starting
      • WM 2706IN Work Instructions After Disconnecting The Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Disconnecting And Connecting The Battery
        • Effect Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And The Precautions To Be Taken
          • Notes
          • Control Unit Memories
          • Supply Voltage Fault Entry
          • Ready Status
          • 2470 DME Control Module
          • Tyre Pressure Monitoring System
          • 4560 Steering Angle Sensor
          • Motor For Sunroof
          • 6452 Power Windows
          • 9025 Instrument Cluster
          • Airbag Control Module
          • On-Board Computer
          • Pcm
          • Test Drive After Disconnecting Battery
          • Effects Of Overvoltage On Electrical And Electronic Systems During Welding Work And The Precautions To Be Taken
      • WM 271219 Removing And Installing Battery Cover (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Battery Cover
        • Installing Battery Cover
        • Subsequent Work
          • Reworking If Cowl Panel Cover Deformed
      • WM 272219 Removing And Installing Generator (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Generator
        • Installing Generator
        • Subsequent Work
      • WM 272219 Removing And Installing Generator (Except 911 Turbo Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Generator
        • Installing Generator
        • Subsequent Work
      • WM 272219 Removing And Installing The Generator (911 Gt3, 911 Gt3 RS)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Generator
        • Removing The Generator
        • Installing The Generator
        • Subsequent Work
          • Subsequent Work For Generator
      • WM 276019 Removing And Installing Starter (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Starter
        • Installing Starter
        • Subsequent Work
      • WM 276019 Removing And Installing Starter (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Starter
        • Installing Starter
        • Subsequent Work
      • WM 276019 Removing And Installing Starter (911 Gt3, 911 Gt3 RS)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Starter
        • Removing The Starter
          • Removing Starter
        • Installing The Starter
        • Subsequent Work
          • Subsequent Work For Starter
  • Drivers Assistance Systems - ADAS
    • 91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)
      • WM 911019 Removing And Installing Pcm Display And Operator Control Unit (Except 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing PCM Display And Operator Control Unit
        • Installing PCM Display And Operator Control Unit
        • Subsequent Work
        • Programming Display And Operator Control Unit (PCM 3.0)
          • Replacing Display And Operator Control Unit (PCM 3.0)
      • WM 911019 Removing And Installing Pcm Display And Control Unit (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Tools
        • Preliminary Work
          • Preliminary Work For PCM Display And Operator Control Unit
        • Removing PCM Display And Control Unit
          • Removing Display For The PCM Operator Control Unit
        • Installing PCM Display And Control Unit
          • Installing Display And PCM Operator Control Unit
        • Subsequent Work
          • Subsequent Work For PCM Display And Operator Control Unit
        • Reading out PCM Display And Control Unit
          • Reading From And Writing To The PCM Display And Operator Control Unit
        • Programming PCM Display And Control Unit
          • Programming The Display And Operator Control Unit
      • WM 911219 Removing And Installing Navigation Unit (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Navigation Unit
        • Removing Navigation Unit
          • Notes
          • Removing The Navigation Unit With Retaining Bracket
          • Removing Navigation Unit
          • Removing The Navigation Unit (US Version)
        • Installing Navigation Unit
          • Notes
          • Installing Navigation Unit
          • Installing The Navigation Unit With Retaining Bracket
          • Installing The Navigation Unit (US Version)
        • Subsequent Work
          • Subsequent Work For Navigation Unit
        • Programming Navigation Unit
          • Reading Out And Writing Values For Navigation Unit
        • Coding Navigation Unit
      • WM 911319 Removing And Installing GPS Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For GPS Antenna
        • Removing GPS Antenna
        • Installing GPS Antenna
        • Subsequent Work
          • Subsequent Work For GPS Antenna
      • WM 911719 Removing And Installing TV Tuner (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
          • Installation Position C4 - LHD Vehicles
        • Preliminary Work
          • Preliminary Work For Removing TV Tuner
        • Removing TV Tuner
        • Installing TV Tuner
        • Subsequent Work
          • Subsequent Work For Installing TV Tuner
        • Programming TV Tuner
          • Notes
          • Coding TV Tuner
      • WM 912219 Removing And Installing Multimedia Interface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Multimedia Interface
        • Installing Multimedia Interface
      • WM 912419 Removing And Installing "Cd Player" Car Radio (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Preliminary Work For Car Radio
        • Removing The Car Radio
        • Installing The Car Radio
        • Subsequent Work
          • Subsequent Work For Car Radio
        • Reading Out Car Radio
          • Reading Out And Transferring Car Radio Values
        • Programming Car Radio
          • Programming The Car Radio
      • WM 912425 Eliminating Symptoms In Body Interior: Re-Programming Compact Disc Radio (CDR 30, I-No. 695) (Radio Switches On/Off By Itself/SY0410) (911 Gt3, 911 Gt2)
        • Technical Values
        • General Information
          • Symptom
          • Remedial Action
        • Tools And Materials
        • Re-Programming CDR 30
        • Working Time
      • WM 912425 Eliminating Symptoms In Body Interior: Re-Programming Compact Disc Radio (CDR 30, I-No. 695) (Loss Of User Data/SY2310) (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • General Information
          • Symptom
          • Remedial Action
        • Tools And Materials
          • Tools
        • Re-Programming CDR 30 (system Software)
          • Re-Programming CDR 30
        • Working Time
      • WM 912455 Replacing Buttons On "Cd Player" Car Radio (CDR 30) (911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Replacing Buttons On "CD player" Car Radio (CDR 30)
      • WM 912855 Replacing The Antenna Leads (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For PCM/radio Antenna Lead Up To Antenna Control Unit
          • Preliminary Work For Antenna Lead For Left Antenna Amplifier Up To Right Antenna Amplifier
          • Preliminary Work For Antenna Lead For Left Antenna Amplifier Up To KESSY/PAS Control Unit
          • Preliminary Work For Antenna Lead For Right Antenna Amplifier Up To Rod Antenna
          • Preliminary Work For Navigation Unit Antenna Lead Up To GPS Antenna
        • Installing The Antenna Leads
          • Installing Antenna Leads
        • Subsequent Work
          • Subsequent Work For PCM/Radio Antenna Lead Up To Antenna Control Unit
          • Subsequent Work For Antenna Lead For Left Antenna Amplifier Up To Right Antenna Amplifier
          • Subsequent Work For Antenna Lead For Left Antenna Amplifier Up To KESSY/PAS Control Unit
          • Subsequent Work For Antenna Lead For Right Antenna Amplifier Up To Rod Antenna
          • Subsequent Work For Navigation Unit Antenna Lead Up To GPS Antenna
      • WM 913619 Removing And Installing Subwoofer (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO)
        • Removing Subwoofer
        • Installing Subwoofer
      • WM 913819 Removing And Installing SDARS Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For SDARS Antenna
        • Removing SDARS Antenna
        • Installing SDARS Antenna
        • Subsequent Work
          • Subsequent Work For SDARS Antenna
      • WM 913819 Removing And Installing Rod Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rod Antenna
        • Installing Rod Antenna
        • Reworking
          • Subsequent Work
      • WM 914019 Removing And Installing Front Loudspeakers (Dashboard) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preparation For Front Loudspeakers (Dashboard)
        • Removing Front Loudspeakers (Dashboard)
          • Notes
          • Removing Central Speaker From Dashboard
        • Installing Front Loudspeakers (Dashboard)
          • Notes
          • Installing The Centre Speaker Into The Instrument Panel
        • Subsequent Work
          • Subsequent Work For Front Speakers (Dashboard)
      • WM 914119 Removing And Installing Front Loudspeakers (Door) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Front Door Speakers
        • Removing Front Loudspeakers (Door)
          • Removing Bass Speaker
          • Removing Mid-Tone Speaker
        • Installing Front Loudspeakers (Door)
          • Installing Bass Speaker
          • Installing Mid-Tone Speaker
        • Subsequent Work
          • Subsequent Work - Front Door Speakers
      • WM 914219 Removing And Installing Rear Loudspeakers (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Rear Loudspeakers
          • Removing Rear Speakers
        • Installing Rear Loudspeakers
          • Installing Rear Speakers
      • WM 914419 Removing And Installing Loudspeaker Amplifier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Loudspeaker Amplifier
        • Removing Loudspeaker Amplifier
        • Installing Loudspeaker Amplifier
        • Subsequent Work
          • Subsequent Work For Loudspeaker Amplifier
        • Programming Loudspeaker Amplifier
          • Reading Out And Writing Loudspeaker Amplifier
          • Coding Loudspeaker Amplifier
      • WM 914719 Removing And Installing Mobile Communication Antenna (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Preliminary Work
          • Preliminary Work For Mobile Communication Antenna
        • Removing Mobile Communication Antenna
        • Installing Mobile Communication Antenna
        • Subsequent Work
          • Subsequent Work For Mobile Communication Antenna
      • WM 915719 Removing And Installing Microphone For Telephone (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Microphone
        • Removing Microphone For Telephone
        • Installing Microphone For Telephone
        • Subsequent Work
          • Subsequent Work - Microphone For Telephone
      • WM 916019 Removing And Installing Cd Changer (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Removing CD Changer
        • Removing CD Changer
        • Installing CD Changer
        • Subsequent Work
          • Subsequent Work - CD Changer
      • WM 916119 Removing And Installing Multi-Function Remote Control (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Preliminary Work
          • Preliminary Work For Multi-Function Remote Control
        • Removing Multi-Function Remote Control
        • Installing Multi-Function Remote Control
        • Subsequent Work
          • Subsequent Work For Multi-Function Remote Control
      • WM 916219 Removing And Installing Control Unit For Steering Wheel Electronics (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Control Unit For Steering Wheel Electronics
        • Installing Control Unit For Steering Wheel Electronics
        • Subsequent Work
        • Reading Data Out Of And Writing Data Into The Control Unit For Steering Wheel Electronics
          • Reading And Writing Values
        • Coding Control Unit For Steering Wheel Electronics
        • Calibrating Steering-Angle Sensor
      • WM 916819 Removing And Installing Outside Temperature Sensor (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Outside Temperature Sensor
        • Installing Outside Temperature Sensor
      • WM 917419 Removing And Installing Control Module For PARKASSIST (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Control Module For ParkAssist
        • Removing Control Module For Parkassist
        • Installing Control Module For Parkassist
        • Subsequent Work
          • Subsequent Work - Control Module For ParkAssist
        • Programming Control Unit For Parkassist
          • Reading out and writing values for ParkAssist control unit
          • Coding Control Unit For ParkAssist
      • WM 917419 Removing And Installing Control Unit For PARKASSIST (PDC) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Control Module For ParkAssist
        • Removing Control Unit For Parkassist (PDC)
        • Installing Control Unit For Parkassist (PDC)
        • Subsequent Work
          • Subsequent Work - Control Module For ParkAssist
        • Programming Control Unit For Parkassist (PDC)
      • WM 917519 Removing And Installing Sensor For PARKASSIST (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Sensor For ParkAssist
        • Removing Sensor For Parkassist
        • Installing Sensor For Parkassist
        • Subsequent Work
          • Subsequent Work - Sensor For ParkAssist
      • WM 917719 Removing And Installing Multi-Function Control Unit (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Multi-Function Remote Control
      • WM 918419 Removing And Installing Antenna Amplifier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Antenna Amplifier
        • Removing Antenna Amplifier
        • Installing Antenna Amplifier
        • Subsequent Work - Antenna Amplifier
      • WM 918619 Removing And Installing Control Unit For Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Antenna Control Unit
        • Removing Control Unit For Antenna
          • Removing Antenna Control Unit
        • Installing Control Module For Antenna
          • Installing Antenna Control Unit
        • Subsequent Work
          • Subsequent Work - Antenna Control Unit
      • WM 918819 Removing And Installing Console For Telephone(Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Console For Telephone
          • Notes
          • Variant 1
          • Variant 2
        • Installing Console For Telephone
          • Notes
          • Variant 1
          • Variant 2
      • WM 918819 Removing And Installing Console For Telephone (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Console For Telephone
        • Installing Console For Telephone
      • WM 919019 Removing And Installing Control Unit For Telephone (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Control Unit For Telephone
        • Installing Control Unit For Telephone
        • Subsequent Work
      • WM 919125 Teaching Additional/Telephone Handset (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Teaching Additional/Telephone Handset
      • WM 919019 Removing And Installing Control Unit For Telephone (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
          • Overview
          • Tightening Torques For Telephone Control Unit
        • Preliminary Work
          • Preliminary Work - Telephone Control Unit
        • Removing Control Unit For Telephone
        • Installing Control Unit For Telephone
        • Subsequent Work
          • Subsequent Work - Telephone Control Unit
        • Coding Control Unit For Telephone
      • WM 919119 Removing And Installing Additional Telephone Receiver (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Additional Receiver For Telephone
        • Removing Additional Telephone Receiver
          • Removing Additional Receiver For Telephone
        • Installing Additional Telephone Receiver
          • Installing Additional Receiver For Telephone
        • Subsequent Work
          • Subsequent Work For Additional Receiver For Telephone
  • Entertainment Systems
    • 91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)
      • WM 911019 Removing And Installing Pcm Display And Operator Control Unit (Except 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing PCM Display And Operator Control Unit
        • Installing PCM Display And Operator Control Unit
        • Subsequent Work
        • Programming Display And Operator Control Unit (PCM 3.0)
          • Replacing Display And Operator Control Unit (PCM 3.0)
      • WM 911019 Removing And Installing Pcm Display And Control Unit (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Tools
        • Preliminary Work
          • Preliminary Work For PCM Display And Operator Control Unit
        • Removing PCM Display And Control Unit
          • Removing Display For The PCM Operator Control Unit
        • Installing PCM Display And Control Unit
          • Installing Display And PCM Operator Control Unit
        • Subsequent Work
          • Subsequent Work For PCM Display And Operator Control Unit
        • Reading out PCM Display And Control Unit
          • Reading From And Writing To The PCM Display And Operator Control Unit
        • Programming PCM Display And Control Unit
          • Programming The Display And Operator Control Unit
      • WM 911219 Removing And Installing Navigation Unit (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Navigation Unit
        • Removing Navigation Unit
          • Notes
          • Removing The Navigation Unit With Retaining Bracket
          • Removing Navigation Unit
          • Removing The Navigation Unit (US Version)
        • Installing Navigation Unit
          • Notes
          • Installing Navigation Unit
          • Installing The Navigation Unit With Retaining Bracket
          • Installing The Navigation Unit (US Version)
        • Subsequent Work
          • Subsequent Work For Navigation Unit
        • Programming Navigation Unit
          • Reading Out And Writing Values For Navigation Unit
        • Coding Navigation Unit
      • WM 911319 Removing And Installing GPS Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For GPS Antenna
        • Removing GPS Antenna
        • Installing GPS Antenna
        • Subsequent Work
          • Subsequent Work For GPS Antenna
      • WM 911719 Removing And Installing TV Tuner (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
          • Installation Position C4 - LHD Vehicles
        • Preliminary Work
          • Preliminary Work For Removing TV Tuner
        • Removing TV Tuner
        • Installing TV Tuner
        • Subsequent Work
          • Subsequent Work For Installing TV Tuner
        • Programming TV Tuner
          • Notes
          • Coding TV Tuner
      • WM 912219 Removing And Installing Multimedia Interface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Multimedia Interface
        • Installing Multimedia Interface
      • WM 912419 Removing And Installing "Cd Player" Car Radio (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Preliminary Work For Car Radio
        • Removing The Car Radio
        • Installing The Car Radio
        • Subsequent Work
          • Subsequent Work For Car Radio
        • Reading Out Car Radio
          • Reading Out And Transferring Car Radio Values
        • Programming Car Radio
          • Programming The Car Radio
      • WM 912425 Eliminating Symptoms In Body Interior: Re-Programming Compact Disc Radio (CDR 30, I-No. 695) (Radio Switches On/Off By Itself/SY0410) (911 Gt3, 911 Gt2)
        • Technical Values
        • General Information
          • Symptom
          • Remedial Action
        • Tools And Materials
        • Re-Programming CDR 30
        • Working Time
      • WM 912425 Eliminating Symptoms In Body Interior: Re-Programming Compact Disc Radio (CDR 30, I-No. 695) (Loss Of User Data/SY2310) (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • General Information
          • Symptom
          • Remedial Action
        • Tools And Materials
          • Tools
        • Re-Programming CDR 30 (system Software)
          • Re-Programming CDR 30
        • Working Time
      • WM 912455 Replacing Buttons On "Cd Player" Car Radio (CDR 30) (911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Replacing Buttons On "CD player" Car Radio (CDR 30)
      • WM 912855 Replacing The Antenna Leads (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For PCM/radio Antenna Lead Up To Antenna Control Unit
          • Preliminary Work For Antenna Lead For Left Antenna Amplifier Up To Right Antenna Amplifier
          • Preliminary Work For Antenna Lead For Left Antenna Amplifier Up To KESSY/PAS Control Unit
          • Preliminary Work For Antenna Lead For Right Antenna Amplifier Up To Rod Antenna
          • Preliminary Work For Navigation Unit Antenna Lead Up To GPS Antenna
        • Installing The Antenna Leads
          • Installing Antenna Leads
        • Subsequent Work
          • Subsequent Work For PCM/Radio Antenna Lead Up To Antenna Control Unit
          • Subsequent Work For Antenna Lead For Left Antenna Amplifier Up To Right Antenna Amplifier
          • Subsequent Work For Antenna Lead For Left Antenna Amplifier Up To KESSY/PAS Control Unit
          • Subsequent Work For Antenna Lead For Right Antenna Amplifier Up To Rod Antenna
          • Subsequent Work For Navigation Unit Antenna Lead Up To GPS Antenna
      • WM 913619 Removing And Installing Subwoofer (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO)
        • Removing Subwoofer
        • Installing Subwoofer
      • WM 913819 Removing And Installing SDARS Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For SDARS Antenna
        • Removing SDARS Antenna
        • Installing SDARS Antenna
        • Subsequent Work
          • Subsequent Work For SDARS Antenna
      • WM 913819 Removing And Installing Rod Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rod Antenna
        • Installing Rod Antenna
        • Reworking
          • Subsequent Work
      • WM 914019 Removing And Installing Front Loudspeakers (Dashboard) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preparation For Front Loudspeakers (Dashboard)
        • Removing Front Loudspeakers (Dashboard)
          • Notes
          • Removing Central Speaker From Dashboard
        • Installing Front Loudspeakers (Dashboard)
          • Notes
          • Installing The Centre Speaker Into The Instrument Panel
        • Subsequent Work
          • Subsequent Work For Front Speakers (Dashboard)
      • WM 914119 Removing And Installing Front Loudspeakers (Door) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Front Door Speakers
        • Removing Front Loudspeakers (Door)
          • Removing Bass Speaker
          • Removing Mid-Tone Speaker
        • Installing Front Loudspeakers (Door)
          • Installing Bass Speaker
          • Installing Mid-Tone Speaker
        • Subsequent Work
          • Subsequent Work - Front Door Speakers
      • WM 914219 Removing And Installing Rear Loudspeakers (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Rear Loudspeakers
          • Removing Rear Speakers
        • Installing Rear Loudspeakers
          • Installing Rear Speakers
      • WM 914419 Removing And Installing Loudspeaker Amplifier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Loudspeaker Amplifier
        • Removing Loudspeaker Amplifier
        • Installing Loudspeaker Amplifier
        • Subsequent Work
          • Subsequent Work For Loudspeaker Amplifier
        • Programming Loudspeaker Amplifier
          • Reading Out And Writing Loudspeaker Amplifier
          • Coding Loudspeaker Amplifier
      • WM 914719 Removing And Installing Mobile Communication Antenna (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Preliminary Work
          • Preliminary Work For Mobile Communication Antenna
        • Removing Mobile Communication Antenna
        • Installing Mobile Communication Antenna
        • Subsequent Work
          • Subsequent Work For Mobile Communication Antenna
      • WM 915719 Removing And Installing Microphone For Telephone (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Microphone
        • Removing Microphone For Telephone
        • Installing Microphone For Telephone
        • Subsequent Work
          • Subsequent Work - Microphone For Telephone
      • WM 916019 Removing And Installing Cd Changer (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Removing CD Changer
        • Removing CD Changer
        • Installing CD Changer
        • Subsequent Work
          • Subsequent Work - CD Changer
      • WM 916119 Removing And Installing Multi-Function Remote Control (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Preliminary Work
          • Preliminary Work For Multi-Function Remote Control
        • Removing Multi-Function Remote Control
        • Installing Multi-Function Remote Control
        • Subsequent Work
          • Subsequent Work For Multi-Function Remote Control
      • WM 916219 Removing And Installing Control Unit For Steering Wheel Electronics (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Control Unit For Steering Wheel Electronics
        • Installing Control Unit For Steering Wheel Electronics
        • Subsequent Work
        • Reading Data Out Of And Writing Data Into The Control Unit For Steering Wheel Electronics
          • Reading And Writing Values
        • Coding Control Unit For Steering Wheel Electronics
        • Calibrating Steering-Angle Sensor
      • WM 916819 Removing And Installing Outside Temperature Sensor (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Outside Temperature Sensor
        • Installing Outside Temperature Sensor
      • WM 917419 Removing And Installing Control Module For PARKASSIST (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Control Module For ParkAssist
        • Removing Control Module For Parkassist
        • Installing Control Module For Parkassist
        • Subsequent Work
          • Subsequent Work - Control Module For ParkAssist
        • Programming Control Unit For Parkassist
          • Reading out and writing values for ParkAssist control unit
          • Coding Control Unit For ParkAssist
      • WM 917419 Removing And Installing Control Unit For PARKASSIST (PDC) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Control Module For ParkAssist
        • Removing Control Unit For Parkassist (PDC)
        • Installing Control Unit For Parkassist (PDC)
        • Subsequent Work
          • Subsequent Work - Control Module For ParkAssist
        • Programming Control Unit For Parkassist (PDC)
      • WM 917519 Removing And Installing Sensor For PARKASSIST (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Sensor For ParkAssist
        • Removing Sensor For Parkassist
        • Installing Sensor For Parkassist
        • Subsequent Work
          • Subsequent Work - Sensor For ParkAssist
      • WM 917719 Removing And Installing Multi-Function Control Unit (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Multi-Function Remote Control
      • WM 918419 Removing And Installing Antenna Amplifier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Antenna Amplifier
        • Removing Antenna Amplifier
        • Installing Antenna Amplifier
        • Subsequent Work - Antenna Amplifier
      • WM 918619 Removing And Installing Control Unit For Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Antenna Control Unit
        • Removing Control Unit For Antenna
          • Removing Antenna Control Unit
        • Installing Control Module For Antenna
          • Installing Antenna Control Unit
        • Subsequent Work
          • Subsequent Work - Antenna Control Unit
      • WM 918819 Removing And Installing Console For Telephone(Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Console For Telephone
          • Notes
          • Variant 1
          • Variant 2
        • Installing Console For Telephone
          • Notes
          • Variant 1
          • Variant 2
      • WM 918819 Removing And Installing Console For Telephone (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Console For Telephone
        • Installing Console For Telephone
      • WM 919019 Removing And Installing Control Unit For Telephone (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Control Unit For Telephone
        • Installing Control Unit For Telephone
        • Subsequent Work
      • WM 919125 Teaching Additional/Telephone Handset (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Teaching Additional/Telephone Handset
      • WM 919019 Removing And Installing Control Unit For Telephone (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
          • Overview
          • Tightening Torques For Telephone Control Unit
        • Preliminary Work
          • Preliminary Work - Telephone Control Unit
        • Removing Control Unit For Telephone
        • Installing Control Unit For Telephone
        • Subsequent Work
          • Subsequent Work - Telephone Control Unit
        • Coding Control Unit For Telephone
      • WM 919119 Removing And Installing Additional Telephone Receiver (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Additional Receiver For Telephone
        • Removing Additional Telephone Receiver
          • Removing Additional Receiver For Telephone
        • Installing Additional Telephone Receiver
          • Installing Additional Receiver For Telephone
        • Subsequent Work
          • Subsequent Work For Additional Receiver For Telephone
  • Exterior Lights
    • 94 - Lights, Lamps, Switches, Exterior -- CARRERA (997)
      • WM 940519 Removing And Installing Main Light Switch (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Main Light Switch
        • Installing Main Light Switch
      • WM 941419 Removing And Installing Headlight Mounting (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Headlight Mounts
        • Removing Headlight Mounting
          • Removing Headlight Mount
        • Installing Headlight Mounting
          • Installing Headlight Mount
          • Testing And Adjusting Headlight Mount
        • Subsequent Work
          • Subsequent Work - Headlight Mounts
      • WM 941519 Removing And Installing Main Headlight (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Main Headlight
        • Installing Main Headlight
      • WM 941537 Disassembling And Assembling Bi-Xenon Cornering Headlights (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Bi-Xenon Cornering Headlights
          • Removing Main Headlight Lid
          • Removing Gas-Discharge Control Unit
          • Removing Gas-Discharge Headlight
        • Assembling Bi-Xenon Cornering Headlights
          • Installing Gas-Discharge Headlight
          • Installing Gas-Discharge Control Unit
          • Installing Main Headlight Lid
        • Subsequent Work
      • WM 941537 Disassembling And Assembling Bi-Xenon Headlights (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Bi-Xenon Headlights
          • Removing Main Headlight Lid
          • Removing Gas-Discharge Control Unit
          • Removing Gas-Discharge Headlight
        • Assembling Bi-Xenon Headlights
          • Installing Gas-Discharge Headlight
          • Installing Gas-Discharge Control Unit
          • Installing Main Headlight Lid
        • Subsequent Work
      • WM 9415IN Converting Headlights For Left/Right-Hand Driving (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Converting Halogen Headlights For Left/Right-Hand Driving
        • Converting Bi-Xenon Headlights For Left/Right-Hand Driving
      • WM 942319 Removing And Installing Halogen Bulb (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Halogen Bulb
          • Removing Main Headlight Lid
          • Removing Halogen Bulb (High Beam)
        • Installing Halogen Bulb
          • Installing Halogen Bulb (High Beam)
          • Installing Main Headlight Lid
        • Subsequent Work
      • WM 942319 Removing And Installing High Beam Halogen Bulb (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing High Beam Halogen Bulb
        • Installing High Beam Halogen Bulb
        • Subsequent Work
      • WM 9423IN Bulb Table And Installation Instructions (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2)
        • Bulb Table
        • Installation Instructions
          • Installation Instructions For Bulbs
      • WM 9423IN Bulb Table And Installation Instructions (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Bulb Table
        • Installation Instructions
      • WM 942619 Removing And Installing Control Unit For Cornering Light (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Control Unit For Cornering Light
          • Notes
          • Removing Control Unit For Cornering Light
        • Installing Control Unit For Cornering Light
          • Notes
          • Installing Control Unit For Cornering Light
        • Subsequent Work
      • WM 942719 Removing And Installing Bulb For Parking Light (Except 911 Turbo Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Bulb For Parking Light
        • Installing Bulb For Parking Light
      • WM 942719 Removing And Installing Light Bulb For Marker Light (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Light Bulb For Marker Light
        • Installing Light Bulb For Marker Light
        • Subsequent Work
      • WM 942719 Removing And Installing Bulb For Parking Light (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Parking Light Bulb
        • Removing Bulb For Parking Light
          • Removing Parking Light Bulb
        • Installing Bulb For Parking Light
          • Installing Parking Light Bulb
        • Subsequent Work
          • Subsequent Work For Parking Light Bulb
      • WM 943119 Removing And Installing Tail Light (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Tail Light
        • Installing Tail Light
      • WM 943319 Removing And Installing Bulb For Rear Light (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Preliminary Work
        • Removing Bulb For Rear Light
        • Installing Bulb For Rear Light
        • Subsequent Work
      • WM 943619 Removing And Installing Stop Light Switch (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Stop Light Switch
        • Installing Stop Light Switch
      • WM 944155 Replacing Reflector Cover (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Reflector Cover
        • Installing Reflector Cover
      • WM 944419 Removing And Installing Bulb For Number Plate Light (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Bulb For Number Plate Light
          • Removing Number Plate Light
          • Removing Bulb For Number Plate Light
        • Installing Bulb For Number Plate Light
          • Notes
          • Installing Number Plate Light
      • WM 944719 Removing And Installing Hazard Warning Light Switch (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Hazard Warning Light Switch
        • Installing Hazard Warning Light Switch
      • WM 944919 Removing And Installing Front Control Unit (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
          • Overview
          • Technical Values - Front Control Unit
        • Preliminary Work
          • Preliminary Work - Front Control Unit
        • Removing Front Control Unit
        • Installing Front Control Unit
        • Subsequent Work
          • Subsequent Work - Front Control Unit
        • Coding Control Unit
          • Reading Out And Printing Out Values
          • Coding The Front End Control Unit
      • WM 945019 Removing And Installing Steering-Column Switch(Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
          • Overview
          • Technical Values - Steering Column Switch
        • Preliminary Work
          • Preliminary Work - Steering Column Switch
        • Removing Steering-Column Switch
        • Installing Steering-Column Switch
          • Removing Steering Column Switch
        • Subsequent Work
          • Subsequent Work - Steering Column Switch
      • WM 945037 Disassembling And Assembling Steering Column Switch (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work - Steering Column Switch
        • Disassembling And Assembling Steering Column Switch
          • Disassembling Steering Column Switch
          • Assembling Steering Column Switch
        • Subsequent Work - Steering Column Switch
      • WM 945119 Removing And Installing Control Unit For Direction Indicator Light (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Direction Indicator Light Control Unit
        • Removing Control Unit For Direction Indicator Light
        • Installing Control Unit For Direction Indicator Light
        • Subsequent Work
          • Subsequent Work For Control Unit For Direction Indicator Light
      • WM 945319 Removing And Installing Side Direction Indicator Light (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Removing Side Direction Indicator Light
        • Installing Side Direction Indicator Light
      • WM 945419 Removing And Installing Front Direction Indicator Light (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Front Direction Indicator Light
        • Removing Front Direction Indicator Light
        • Installing Front Direction Indicator Light
        • Subsequent Work
          • Subsequent Work For Front Direction Indicator Light
      • WM 945619 Removing And Installing Light Bulb For Front Direction Indicator (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Light Bulb For Front Direction Indicator
        • Installing Light Bulb For Front Direction Indicator
        • Subsequent Work
      • WM 945619 Removing And Installing Bulb For Front Direction Indicator (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Gt3, 911 Gt3 RS)
        • Preliminary Work
          • Preliminary Work - Bulb For Front Direction Indicator Light
        • Removing Bulb For Front Direction Indicator
          • Removing Bulb For Front Direction Indicator Light
        • Installing Bulb For Front Direction Indicator
          • Installing Bulb For Front Direction Indicator Light
        • Subsequent Work
          • Subsequent Work - Bulb For Front Direction Indicator Light
      • WM 945719 Removing And Installing Control Unit For Gas Discharge (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Overview
          • Preliminary Work On Control Unit For Gas Discharge
        • Removing Control Unit For Gas Discharge
          • Removing Cap Of Main Headlight
          • Removing Control Unit For Gas Discharge
          • Removing Main Headlight Lid
          • Removing Gas-Discharge Control Unit
        • Installing Control Unit For Gas Discharge
          • Notes
          • Installing Main Headlight Cap
          • Installing Gas-Discharge Control Unit
          • Installing Main Headlight Lid
        • Subsequent Work
          • Overview
          • Subsequent Work On Control Unit For Gas Discharge
      • WM 945919 Removing And Installing Gas-Discharge Cornering Light (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Gas-Discharge Cornering Light
          • Removing Main Headlight Lid
          • Loosening Gas-Discharge Control Unit
          • Removing Gas-Discharge Headlight
        • Installing Gas-Discharge Cornering Light
          • Installing Gas-Discharge Headlight
          • Securing Gas-Discharge Control Unit
          • Installing Main Headlight Lid
        • Subsequent Work
      • WM 945919 Removing And Installing Gas-Discharge Headlight (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Gas-Discharge Headlight
          • Removing Main Headlight Lid
          • Removing Gas-Discharge Headlight
        • Installing Gas-Discharge Headlight
          • Notes
          • Installing Main Headlight Lid
        • Subsequent Work
      • WM 945919 Removing And Installing Gas Discharge Lamp (911 CARR. Coupe, CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Preliminary Work
          • Notes
          • Removing Cap Of Main Headlight
        • Removing Gas Discharge Lamp
        • Installing Gas Discharge Lamp
        • Subsequent Work
          • Overview
          • Installing Main Headlight Cap
      • WM 946419 Removing And Installing Fog Lights (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt3, 911 Gt2, 911 Gt2 RS)
        • Preliminary Work
          • Preliminary Work For Fog Lights
        • Removing Fog Lights
        • Installing Fog Lights
        • Subsequent Work
          • Subsequent Work For Fog Lights
          • Setting The Fog Lights
      • WM 946719 Removing And Installing Bulb For Fog Light (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Bulb For Fog Light
        • Installing Bulb For Fog Light
      • WM 947019 Removing And Installing Auxiliary Brake Light (911 Turbo Coupe, 911 Turbo CABRIO, 911 Gt2)
        • Removing Auxiliary Brake Light
        • Installing Auxiliary Brake Light
      • WM 947119 Removing And Installing Auxiliary Headlight (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2)
        • Preliminary Work
        • Removing Auxiliary Headlight
        • Installing Auxiliary Headlight
        • Subsequent Work
      • WM 947219 Removing And Reinstalling Switch For Reversing Light (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Switch For Reversing Light
        • Installing Switch For Reversing Light
        • Subsequent Work
      • WM 947519 Removing And Installing Light Bulb For Reversing Light (Except 911 CARR. CABRIO, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Light Bulb For Reversing Light
        • Installing Light Bulb For Reversing Light
        • Subsequent Work
      • WM 947819 Removing And Installing Front Angle Sensor For Headlight Beam Adjustment (HBA) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Front Angle Sensor For Headlight Levelling System
        • Removing Front Angle Sensor For Headlight Beam Adjustment (HBA)
          • Removing Front Angle Sensor For Headlight Levelling System
        • Installing Front Angle Sensor For Headlight Beam Adjustment (HBA)
          • Installing Front Angle Sensor For Headlight Levelling System
        • Subsequent Work
          • Subsequent Work - Front Angle Sensor For Headlight Levelling System
      • WM 947919 Removing And Installing Rear Angle Sensor For Headlight Beam Adjustment (HBA) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Removing Rear Angle Sensor For Headlight Beam Adjustment (HBA)
          • Removing Rear Angle Sensor For Headlight Levelling System
        • Installing Rear Angle Sensor For Headlight Beam Adjustment (HBA)
          • Installing Rear Angle Sensor For Headlight Levelling System
        • Subsequent Work
          • Subsequent Work - Rear Angle Sensor For Headlight Levelling System
      • WM 949419 Removing And Installing Drive Motor For Cornering Light Beam Adjustment (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Drive Motor For Cornering Light Beam Adjustment
          • Removing Main Headlight Lid
          • Loosening Gas-Discharge Control Unit
          • Removing Servo Motor For Range Adjustment
        • Installing Servo Motor For Cornering Light Beam Adjustment
          • Installing Servo Motor For Range Adjustment
          • Installing Main Headlight Lid
        • Subsequent Work
      • WM 949419 Removing And Installing Servo Motor For Headlight Levelling System (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Preliminary Work - Servo Motor For Headlight Levelling System
          • Removing Cap Of Main Headlight
        • Removing Servo Motor For Headlight Levelling System
        • Installing Servo Motor For Headlight Levelling System
        • Subsequent Work
          • Installing Main Headlight Cap
          • Subsequent Work - Servo Motor For Headlight Levelling System
  • Gauges & Instrument Panels
    • 90 - Instruments, Alarm System -- CARRERA (997)
      • WM 900319 Removing And Installing Dashboard Insert (Applies To All Models Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO And Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For The Dashboard Insert
        • Removing Dashboard Inset
        • Installing Dashboard Inset
        • Subsequent Work
          • Subsequent Work For The Dashboard Insert
      • WM 902219 Removing And Installing Stopwatch (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, 911 Gt2 RS)
        • Tools
        • Technical Values
        • Removing Stopwatch
        • Installing Stopwatch
        • Programming Stopwatch
          • Reading Out And Writing Stopwatch Values
          • Coding Stopwatch
      • WM 902519 Removing And Installing Instrument Cluster (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Technical Values
        • General Warning Notes
          • General Warnings For Instrument Cluster
        • Preliminary Work
          • Preliminary Work For Instrument Cluster
        • Removing Instrument Cluster
        • Installing Instrument Cluster
        • Subsequent Work
          • Reworking Instrument Cluster
        • Programming Instrument Cluster
          • Reading and Printing Values
          • Programming The Instrument Cluster
      • WM 903519 Removing And Installing Gateway Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Gateway Control Unit
        • General Warning Notes
          • General Warnings For Gateway Control Module
        • Removing Gateway Control Unit
        • Installing Gateway Control Unit
        • Subsequent Work
          • Subsequent Work For Gateway Control Unit
        • Coding Gateway Control Unit
          • Coding The Gateway Control Unit
          • Programming Gateway Control Unit
      • WM 905019 Removing And Installing Horn (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Horn
        • Removing Horn
        • Installing Horn
        • Subsequent Work
          • Subsequent Work On Horn
      • WM 905819 Installing And Removing Socket (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2)
        • Preliminary Work
          • Preliminary Work For Passenger's Footwell Socket
          • Preliminary Work For Center Console Socket
        • Removing Socket
          • Removing Passenger's Footwell Socket
          • Removing Center Console Socket
        • Installing Socket
          • Installing Passenger's Footwell Socket
          • Installing The Center Console Socket
        • Subsequent Work
          • Subsequent Work For Passenger's Footwell Socket
          • Reworking The Centre Console Socket
      • WM 906219 Removing And Installing Cigar Lighter (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Preliminary Work
          • Preliminary Work For Cigar Lighter
        • Removing Cigar Lighter
        • Installing Cigar Lighter
        • Subsequent Work
          • Removing The Cigar Lighter
  • Infotainment
    • 91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)
      • WM 911019 Removing And Installing Pcm Display And Operator Control Unit (Except 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing PCM Display And Operator Control Unit
        • Installing PCM Display And Operator Control Unit
        • Subsequent Work
        • Programming Display And Operator Control Unit (PCM 3.0)
          • Replacing Display And Operator Control Unit (PCM 3.0)
      • WM 911019 Removing And Installing Pcm Display And Control Unit (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Tools
        • Preliminary Work
          • Preliminary Work For PCM Display And Operator Control Unit
        • Removing PCM Display And Control Unit
          • Removing Display For The PCM Operator Control Unit
        • Installing PCM Display And Control Unit
          • Installing Display And PCM Operator Control Unit
        • Subsequent Work
          • Subsequent Work For PCM Display And Operator Control Unit
        • Reading out PCM Display And Control Unit
          • Reading From And Writing To The PCM Display And Operator Control Unit
        • Programming PCM Display And Control Unit
          • Programming The Display And Operator Control Unit
      • WM 911219 Removing And Installing Navigation Unit (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Navigation Unit
        • Removing Navigation Unit
          • Notes
          • Removing The Navigation Unit With Retaining Bracket
          • Removing Navigation Unit
          • Removing The Navigation Unit (US Version)
        • Installing Navigation Unit
          • Notes
          • Installing Navigation Unit
          • Installing The Navigation Unit With Retaining Bracket
          • Installing The Navigation Unit (US Version)
        • Subsequent Work
          • Subsequent Work For Navigation Unit
        • Programming Navigation Unit
          • Reading Out And Writing Values For Navigation Unit
        • Coding Navigation Unit
      • WM 911319 Removing And Installing GPS Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For GPS Antenna
        • Removing GPS Antenna
        • Installing GPS Antenna
        • Subsequent Work
          • Subsequent Work For GPS Antenna
      • WM 911719 Removing And Installing TV Tuner (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
          • Installation Position C4 - LHD Vehicles
        • Preliminary Work
          • Preliminary Work For Removing TV Tuner
        • Removing TV Tuner
        • Installing TV Tuner
        • Subsequent Work
          • Subsequent Work For Installing TV Tuner
        • Programming TV Tuner
          • Notes
          • Coding TV Tuner
      • WM 912219 Removing And Installing Multimedia Interface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Multimedia Interface
        • Installing Multimedia Interface
      • WM 912419 Removing And Installing "Cd Player" Car Radio (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Preliminary Work For Car Radio
        • Removing The Car Radio
        • Installing The Car Radio
        • Subsequent Work
          • Subsequent Work For Car Radio
        • Reading Out Car Radio
          • Reading Out And Transferring Car Radio Values
        • Programming Car Radio
          • Programming The Car Radio
      • WM 912425 Eliminating Symptoms In Body Interior: Re-Programming Compact Disc Radio (CDR 30, I-No. 695) (Radio Switches On/Off By Itself/SY0410) (911 Gt3, 911 Gt2)
        • Technical Values
        • General Information
          • Symptom
          • Remedial Action
        • Tools And Materials
        • Re-Programming CDR 30
        • Working Time
      • WM 912425 Eliminating Symptoms In Body Interior: Re-Programming Compact Disc Radio (CDR 30, I-No. 695) (Loss Of User Data/SY2310) (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • General Information
          • Symptom
          • Remedial Action
        • Tools And Materials
          • Tools
        • Re-Programming CDR 30 (system Software)
          • Re-Programming CDR 30
        • Working Time
      • WM 912455 Replacing Buttons On "Cd Player" Car Radio (CDR 30) (911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Replacing Buttons On "CD player" Car Radio (CDR 30)
      • WM 912855 Replacing The Antenna Leads (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For PCM/radio Antenna Lead Up To Antenna Control Unit
          • Preliminary Work For Antenna Lead For Left Antenna Amplifier Up To Right Antenna Amplifier
          • Preliminary Work For Antenna Lead For Left Antenna Amplifier Up To KESSY/PAS Control Unit
          • Preliminary Work For Antenna Lead For Right Antenna Amplifier Up To Rod Antenna
          • Preliminary Work For Navigation Unit Antenna Lead Up To GPS Antenna
        • Installing The Antenna Leads
          • Installing Antenna Leads
        • Subsequent Work
          • Subsequent Work For PCM/Radio Antenna Lead Up To Antenna Control Unit
          • Subsequent Work For Antenna Lead For Left Antenna Amplifier Up To Right Antenna Amplifier
          • Subsequent Work For Antenna Lead For Left Antenna Amplifier Up To KESSY/PAS Control Unit
          • Subsequent Work For Antenna Lead For Right Antenna Amplifier Up To Rod Antenna
          • Subsequent Work For Navigation Unit Antenna Lead Up To GPS Antenna
      • WM 913619 Removing And Installing Subwoofer (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO)
        • Removing Subwoofer
        • Installing Subwoofer
      • WM 913819 Removing And Installing SDARS Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For SDARS Antenna
        • Removing SDARS Antenna
        • Installing SDARS Antenna
        • Subsequent Work
          • Subsequent Work For SDARS Antenna
      • WM 913819 Removing And Installing Rod Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rod Antenna
        • Installing Rod Antenna
        • Reworking
          • Subsequent Work
      • WM 914019 Removing And Installing Front Loudspeakers (Dashboard) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preparation For Front Loudspeakers (Dashboard)
        • Removing Front Loudspeakers (Dashboard)
          • Notes
          • Removing Central Speaker From Dashboard
        • Installing Front Loudspeakers (Dashboard)
          • Notes
          • Installing The Centre Speaker Into The Instrument Panel
        • Subsequent Work
          • Subsequent Work For Front Speakers (Dashboard)
      • WM 914119 Removing And Installing Front Loudspeakers (Door) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Front Door Speakers
        • Removing Front Loudspeakers (Door)
          • Removing Bass Speaker
          • Removing Mid-Tone Speaker
        • Installing Front Loudspeakers (Door)
          • Installing Bass Speaker
          • Installing Mid-Tone Speaker
        • Subsequent Work
          • Subsequent Work - Front Door Speakers
      • WM 914219 Removing And Installing Rear Loudspeakers (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Rear Loudspeakers
          • Removing Rear Speakers
        • Installing Rear Loudspeakers
          • Installing Rear Speakers
      • WM 914419 Removing And Installing Loudspeaker Amplifier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Loudspeaker Amplifier
        • Removing Loudspeaker Amplifier
        • Installing Loudspeaker Amplifier
        • Subsequent Work
          • Subsequent Work For Loudspeaker Amplifier
        • Programming Loudspeaker Amplifier
          • Reading Out And Writing Loudspeaker Amplifier
          • Coding Loudspeaker Amplifier
      • WM 914719 Removing And Installing Mobile Communication Antenna (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Preliminary Work
          • Preliminary Work For Mobile Communication Antenna
        • Removing Mobile Communication Antenna
        • Installing Mobile Communication Antenna
        • Subsequent Work
          • Subsequent Work For Mobile Communication Antenna
      • WM 915719 Removing And Installing Microphone For Telephone (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Microphone
        • Removing Microphone For Telephone
        • Installing Microphone For Telephone
        • Subsequent Work
          • Subsequent Work - Microphone For Telephone
      • WM 916019 Removing And Installing Cd Changer (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Removing CD Changer
        • Removing CD Changer
        • Installing CD Changer
        • Subsequent Work
          • Subsequent Work - CD Changer
      • WM 916119 Removing And Installing Multi-Function Remote Control (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2)
        • Preliminary Work
          • Preliminary Work For Multi-Function Remote Control
        • Removing Multi-Function Remote Control
        • Installing Multi-Function Remote Control
        • Subsequent Work
          • Subsequent Work For Multi-Function Remote Control
      • WM 916219 Removing And Installing Control Unit For Steering Wheel Electronics (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Control Unit For Steering Wheel Electronics
        • Installing Control Unit For Steering Wheel Electronics
        • Subsequent Work
        • Reading Data Out Of And Writing Data Into The Control Unit For Steering Wheel Electronics
          • Reading And Writing Values
        • Coding Control Unit For Steering Wheel Electronics
        • Calibrating Steering-Angle Sensor
      • WM 916819 Removing And Installing Outside Temperature Sensor (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Outside Temperature Sensor
        • Installing Outside Temperature Sensor
      • WM 917419 Removing And Installing Control Module For PARKASSIST (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Control Module For ParkAssist
        • Removing Control Module For Parkassist
        • Installing Control Module For Parkassist
        • Subsequent Work
          • Subsequent Work - Control Module For ParkAssist
        • Programming Control Unit For Parkassist
          • Reading out and writing values for ParkAssist control unit
          • Coding Control Unit For ParkAssist
      • WM 917419 Removing And Installing Control Unit For PARKASSIST (PDC) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Control Module For ParkAssist
        • Removing Control Unit For Parkassist (PDC)
        • Installing Control Unit For Parkassist (PDC)
        • Subsequent Work
          • Subsequent Work - Control Module For ParkAssist
        • Programming Control Unit For Parkassist (PDC)
      • WM 917519 Removing And Installing Sensor For PARKASSIST (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Sensor For ParkAssist
        • Removing Sensor For Parkassist
        • Installing Sensor For Parkassist
        • Subsequent Work
          • Subsequent Work - Sensor For ParkAssist
      • WM 917719 Removing And Installing Multi-Function Control Unit (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Multi-Function Remote Control
      • WM 918419 Removing And Installing Antenna Amplifier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Antenna Amplifier
        • Removing Antenna Amplifier
        • Installing Antenna Amplifier
        • Subsequent Work - Antenna Amplifier
      • WM 918619 Removing And Installing Control Unit For Antenna (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work - Antenna Control Unit
        • Removing Control Unit For Antenna
          • Removing Antenna Control Unit
        • Installing Control Module For Antenna
          • Installing Antenna Control Unit
        • Subsequent Work
          • Subsequent Work - Antenna Control Unit
      • WM 918819 Removing And Installing Console For Telephone(Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Console For Telephone
          • Notes
          • Variant 1
          • Variant 2
        • Installing Console For Telephone
          • Notes
          • Variant 1
          • Variant 2
      • WM 918819 Removing And Installing Console For Telephone (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Console For Telephone
        • Installing Console For Telephone
      • WM 919019 Removing And Installing Control Unit For Telephone (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Control Unit For Telephone
        • Installing Control Unit For Telephone
        • Subsequent Work
      • WM 919125 Teaching Additional/Telephone Handset (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Teaching Additional/Telephone Handset
      • WM 919019 Removing And Installing Control Unit For Telephone (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
          • Overview
          • Tightening Torques For Telephone Control Unit
        • Preliminary Work
          • Preliminary Work - Telephone Control Unit
        • Removing Control Unit For Telephone
        • Installing Control Unit For Telephone
        • Subsequent Work
          • Subsequent Work - Telephone Control Unit
        • Coding Control Unit For Telephone
      • WM 919119 Removing And Installing Additional Telephone Receiver (911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Additional Receiver For Telephone
        • Removing Additional Telephone Receiver
          • Removing Additional Receiver For Telephone
        • Installing Additional Telephone Receiver
          • Installing Additional Receiver For Telephone
        • Subsequent Work
          • Subsequent Work For Additional Receiver For Telephone
  • Interior/Exterior Trim
    • 66 - Exterior Equipment -- CARRERA (997)
      • WM 660319 Removing And Installing Front Spoiler (911 Turbo Coupe, 911 Turbo CABRIO)
        • Preliminary Work
        • Removing Front Spoiler
        • Installing Front Spoiler
        • Subsequent Work
      • WM 660419 Removing And Installing Front Air Grille (911 Turbo Coupe, 911 Turbo CABRIO)
        • Preliminary Work
        • Removing Front Air Grille
          • Removing Air Grille At The Sides
          • Removing Centre Air Grille
        • Installing Front Air Grille
          • Installing Air Grille At The Sides
          • Installing Centre Air Grille
        • Subsequent Work
      • WM 663119 Removing And Installing Sill Cover (Except 911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt2, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Sill Cover
          • Notes
          • Disassembling And Assembling Door Entry Guard
        • Installing Sill Cover
        • Gap Dimensions Of Sill Cover
        • Subsequent Work
      • WM 663419 Removing And Installing Side-Section Trim (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 Gt3)
        • Technical Values
        • Preliminary Work
        • Removing Side-Section Trim
        • Installing Side-Section Trim
        • Subsequent Work
      • WM 665619 Removing And Installing Air Inlet Grille (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
        • Removing Inlet Grille
          • Removing Air Inlet Grille
        • Installing Inlet Grille
          • Installing Air Inlet Grille
      • WM 665819 Removing And Installing Rear Spoiler (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
        • Tools
        • Technical Values
        • Removing Rear Spoiler
          • Removing Rear Spoiler (With Spoiler Drive Intact)
          • Removing Rear Spoiler (With Defective Spoiler Drive)
        • Installing Rear Spoiler
          • Overview
          • Notes
          • Installing Rear Spoiler
        • Subsequent Work
          • Checking Rear Spoiler
      • WM 660719 Removing And Installing Front Logo (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2, 911 Gt3 RS 4.0)
        • Removing Front Logo
        • Installing Front Logo
      • WM 663119 Removing And Installing Sill Cover (Except 911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Sill Cover
          • Notes
          • Disassembling And Assembling Door Entry Guard
        • Installing Sill Cover
        • Gap Dimensions Of Sill Cover
        • Subsequent Work
      • WM 663119 Removing And Installing Door Entry Guard (911 Gt2, 911 Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Door Entry Guard
        • Disassembling And Assembling Door Entry Guard
        • Installing Door Entry Guard
        • Gap Dimensions Of Door Entry Guard
          • Gap Dimensions Of Sill Cover
        • Subsequent Work
      • WM 663619 Removing And Installing Roof Joint Strip (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe)
        • Tools
        • Removing Roof Joint Strip
          • Removing Roof Joint Cover Strip
        • Disassembling Roof Joint Cover Strip
        • Assembling Roof Joint Cover Strip
        • Installing Roof Joint Strip
          • Installing Roof Joint Cover Strip
      • WM 663619 Removing And Installing Roof Joint Cover Strop (C-Pillar Cover) (911 TARGA 4, 911 TARGA 4S)
        • Removing Roof Joint Cover Strip (C-Pillar Cover)
        • Installing Roof Joint Cover Strip (C-Pillar Cover
      • WM 663619 Removing And Installing Roof Joint Cover Strip (911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Tools
        • Removing Roof Joint Cover Strip
        • Disassembling Roof Joint Cover Strip
        • Assembling Roof Joint Cover Strip
        • Installing Roof Joint Cover Strip
      • WM 664519 Removing And Installing Rear Wheel Cover (911 Gt3, 911 Gt3 RS)
        • Tools
        • Tools And Materials
        • Removing Rear Wheel Cover
        • Installing Rear Wheel Cover
      • WM 664655 Replacing "911 Sport Classic" Decorative Film (911 "Sport Classic"
        • Tools
        • Technical Values
        • Tools And Materials
        • Removing "911 Sport Classic" Decorative Film
        • Preparing Vehicle
          • Preparing Vehicle For Sticking On Decorative Film
        • Installing "911 Sport Classic" Decorative Film
          • Notes
          • Installing Decorative Film Using Wet Adhesion Procedure
      • WM 664655 Replacing Design Edition Logo (Wing) (911 "Sport Classic", 911 Speedster)
        • Installing Design Edition Logo (Wing)
          • Sticking On "25 Years Porsche Exclusive" Logo
      • WM 664655 Replacing Gt2 RS Logo (911 Gt2 RS)
        • Replacing GT2 RS Logo
          • Removing GT2 RS Logo
          • Sticking on GT2 RS Logo
      • WM 664655 Replacing Gt3 RS Logo (Film) (911 Gt3 RS)
        • Tools
        • Technical Values
        • Tools And Materials
        • Removing GT3 RS Logo (Film)
        • Preparing Vehicle
          • Preparing Vehicle For Sticking On Decorative Film
        • Installing GT3 RS Logo (Film)
          • Installing GT3 RS Logo (Film) Using Wet Adhesion Procedure
      • WM 665055 Replacing Rear Logo (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Replacing Rear Logo
          • Removing The Rear Logo
        • Replacing Model Logo
          • Replacing The Turbo Model Logo
      • WM 665419 Removing And Installing Switch For Rearview Mirror (Except 911 "Sport Classic", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Switch For Rearview Mirror
        • Installing Switch For Rearview Mirror
      • WM 665819 Removing And Installing Rear Spoiler (I-No. XAF) (911 Turbo Coupe, 911 Turbo CABRIO)
        • Technical Values
        • Removing Rear Spoiler
        • Installing Rear Spoiler
      • WM 665837 Disassembling And Assembling Rear Spoiler (911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Subsequent Work
      • WM 666919 Removing And Installing Trim Frame For Rear Window (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Removing Trim Frame For Rear Window
          • Removing Trim Frame For Side Of Rear Window
        • Removing Trim Frame For Rear Of Rear Window
        • Installing Trim Frame For Rear Window
          • Installing Trim Frame For Rear Of Rear Window
          • Installing Trim Frame For Side Of Rear Window
      • WM 667119 Removing And Installing Engine For Rear Spoiler (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Engine For Rear Spoiler
        • Installing Engine For Rear Spoiler
        • Subsequent Work
      • WM 667219 Removing And Installing Spoiler Drive (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Spoiler Drive
          • Removing Air Guide
          • Removing Fan Motor
          • Removing Spoiler Drive
        • Installing Spoiler Drive
          • Notes
          • Installing Fan Motor
          • Installing Air Guide
        • Subsequent Work
      • WM 667219 Removing And Installing Spoiler Drive (Except 911 "Sport Classic", 911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Spoiler Drive
          • Removing Upper Part Of Spoiler
          • Removing Lower Part Of Spoiler
          • Removing Spoiler Drive
        • Installing Spoiler Drive
          • Notes
          • Installing Lower Part Of Spoiler
          • Installing Upper Part Of Spoiler
      • WM 667237 Disassembling And Assembling Spoiler Drive (Pump Unit) (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Disassembling Spoiler Drive (Pump Unit)
          • Removing Wire Harness
          • Removing Hydraulic Cylinder
          • Removing Pump Unit
        • Assembling Spoiler Drive (Pump Unit)
          • Filling The Pump Unit
          • Installing Pump Unit
          • Filling The Hydraulic Cylinder
          • Installing Hydraulic Cylinder
          • Bleeding The Pump Unit
          • Installing Wire Harness
        • Subsequent Work
      • WM 667755 Replacing Stone Guard Film (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
        • Technical Values
        • Replacing Stone Guard Film
          • General Affixing Regulations For The Stone Guard Film
        • Affixing Stone Guard Film
      • WM 667819 Removing And Installing Mirror Glass (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Mirror Glass
        • Installing Mirror Glass
      • WM 667919 Removing And Installing Housing For Rear-View Mirror (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Housing For Rear-View Mirror
        • Installing Housing For Rear-View Mirror
        • Subsequent Work
      • WM 668219 Removing And Reinstalling Mirror Adjuster Motor (Except 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Mirror Adjuster Motor
        • Installing Mirror Adjuster Motor
        • Subsequent Work
      • WM 668319 Removing And Installing Number Plate Cover (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Front Number Plate Cover
          • Removing Front Number Plate Cover (ECE)
          • Removing Front Number Plate Cover (ROW)
          • Removing Front Number Plate Cover (USA)
        • Removing Rear Number Plate Cover
          • Removing Rear Number Plate Cover (USA)
        • Installing Rear Number Plate Cover
          • Installing Rear Number Plate Cover (USA)
        • Installing Front Number Plate Cover
          • Installing Front Number Plate Cover (USA)
          • Installing Front Number Plate Cover (ROW)
          • Installing Front Number Plate Cover (ECE)
      • WM 668919 Removing And Installing Rear-View Mirror (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rear-View Mirror
          • Disconnecting Plug Connection For Rear-View Mirror
          • Removing Rear-View Mirror
        • Installing Rear-View Mirror
          • Notes
          • Locking Plug Connection For Rear-View Mirror
        • Subsequent Work
      • WM 669219 Removing And Installing The Roof Transport System (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe)
        • Technical Values
        • General Warning Notes
          • Warning Notes
        • Removing The Roof Transport System
        • Removing Base Plate Of Roof Transport System
        • Installing Base Plate Of Roof Transport System
        • Installing The Roof Transport System
    • 68 - Interior Equipment -- CARRERA (997)
      • WM 680519 Removing And Installing Inner Door Sill Trim (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Inner Door Sill Trim
          • Removing Inner Door Sill Trim (Driver's Side)
          • Removing Inner Door Sill Trim (Passenger's Side)
        • Installing Inner Door Sill Trim
          • Installing Inner Door Sill Trim (Driver's Side)
          • Installing Inner Door Sill Trim (Passenger's Side)
      • WM 680719 Removing And Installing Cover Strip (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Cover Strip
        • Installing Cover Strip
        • Subsequent Work
      • WM 680719 Removing And Installing Cover Strip ("RS 3.8") (Gt2 RS, Gt3 RS)
        • Tools
        • Tools And Materials
        • Preliminary Work
        • Removing Cover Strip ("RS 3.8")
        • Installing Cover Strip ("RS 3.8")
          • Notes
          • Processing Instructions For Affixing Adhesive Tape
        • Subsequent Work
      • WM 681119 Removing And Installing Glove Compartment Lock (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Glove Compartment Lock
          • Removing Support For Glove Compartment Lid
          • Removing Glove Compartment Lock
        • Installing Glove Compartment Lock
          • Notes
          • Installing Support For Glove Compartment Lid
      • WM 681219 Removing And Installing Lid For Glove Compartment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Lid For Glove Compartment
        • Installing Lid For Glove Compartment
        • Subsequent Work
      • WM 681419 Removing And Installing Centre Console Cover (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Centre Console Cover
          • Removing Footwell Outlet Vent Cover
          • Removing Centre Console Cover
        • Installing Centre Console Cover
          • Notes
          • Installing Footwell Outlet Vent Cover
        • Subsequent Work
      • WM 681519 Removing And Installing Glove Compartment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Glove Compartment
        • Installing Glove Compartment
        • Subsequent Work
      • WM 681619 Removing And Installing Oddments Tray (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Oddments Tray
          • Removing Shelf
        • Installing Oddments Tray
          • Installing Shelf
        • Subsequent Work
      • WM 681719 Removing And Installing Centre Console (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Centre Console
          • Removing Centre Console (Without Multimedia Interface)
          • Removing Centre Console (With Multimedia Interface)
        • Installing Centre Console
          • Installing Centre Console (Without Multimedia Interface)
          • Installing Centre Console (With Multimedia Interface)
        • Subsequent Work
      • WM 681737 Disassembling And Assembling The Centre Console (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling The Centre Console
          • Disassembling Centre Console
        • Assembling The Centre Console
          • Assembling Centre Console
        • Subsequent Work
      • WM 681919 Removing And Installing Cover For Centre Console (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Centre Console
          • Removing Cover For Support Frame
          • Removing Cover On PDK
          • Removing Frame
        • Installing Cover For Centre Console
          • Installing Frame
          • Installing Cover For Support Frame
          • Installing Cover On PDK
        • Subsequent Work
      • WM 682019 Removing And Installing Front Ashtray (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Front Ashtray
        • Installing Front Ashtray
      • WM 682319 Removing And Installing Sun Visor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, TARGA 4, TARGA 4S, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0)
        • Technical Values
        • Removing Sun Visor
        • Installing Sun Visor
      • WM 682337 Disassembling And Assembling Sun Visor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Sun Visor
          • Removing Mirror Insert
          • Removing Bulb And Contact Clips
          • Removing Mirror Housing
        • Assembling Sun Visor
          • Installing Mirror Housing
          • Inserting Contact Clips And Bulb
          • Installing Mirror Insert
        • Subsequent Work
          • Reworking
      • WM 682719 Removing And Installing Interior Rear-View Mirror (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Interior Rear-View Mirror
        • Installing Interior Rear-View Mirror
      • WM 683019 Removing And Installing Cup Holder (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Cup Holder
        • Installing Cup Holder
      • WM 683037 Disassembling And Assembling Cup Holder (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Cup Holder
          • Removing Flap
        • Assembling Cup Holder
          • Installing Flap
        • Subsequent Work
      • WM 683119 Removing And Installing Cassette/Cd Box (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing CD Box
          • Removing CD Holder
        • Installing CD Box
          • Installing CD Holder
        • Subsequent Work
      • WM 684419 Removing And Installing Tunnel Support (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Tunnel Support
        • Installing Tunnel Support
        • Subsequent Work
      • WM 684819 Removing And Installing Lid For Tray (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Lid For Tray
          • Removing Extension For Centre Console
          • Removing Lid For Tray
        • Installing Lid For Tray
          • Notes
          • Installing Extension For Centre Console
        • Subsequent Work
      • WM 689319 Removing And Installing Fire Extinguisher (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Removing Fire Extinguisher
          • Notes
          • Removing Bracket For Fire Extinguisher
        • Installing Fire Extinguisher
          • Installing Bracket For Fire Extinguisher
          • Installing Fire Extinguisher
      • WM 689319 Removing And Installing Fire Extinguisher (Front Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Fire Extinguisher
          • Notes
          • Removing Tray For Fire Extinguisher
        • Installing Fire Extinguisher
          • Installing Tray For Fire Extinguisher
          • Installing Fire Extinguisher
    • 70 - Linings, Insulation -- CARRERA (997)
      • WM 7000IN Notes For The Care Of Soft-Look Paint Surfaces (All Models)
        • Notes
        • Light Soiling (E.G. Dust)
        • Information
      • WM 700219 Removing And Installing Wing Flange Cover (All Models)
        • Removing Wing Flange Cover
          • Removing Cover For Wing Flange
        • Installing Wing Flange Cover
          • Installing Cover For Wing Flange
          • Additional Assembly Instructions For Replacing Velcro Fasteners
      • WM 700519 Removing And Installing Front Luggage Compartment Trim Panel (All Models)
        • Removing Front Luggage Compartment Trim Panel
          • Removing Front Luggage Compartment Trim Panel (Luggage Compartment Pan)
          • Removing Front Luggage Compartment Trim Panel (Bulkhead)
          • Removing Foam Parts For Front Luggage Compartment
        • Installing Front Luggage Compartment Trim Panel
          • Installing Foam Parts For Front Luggage Compartment
          • Installing Front Luggage Compartment Trim Panel (Bulkhead)
          • Installing Front Luggage Compartment Trim Panel (Luggage Compartment Pan)
      • WM 701619 Removing And Installing Instrument Panel Cover (All Models)
        • Removing Instrument Panel Cover
        • Installing The Instrument Panel Cover
      • WM 701755 Replacing Sound Absorber For Engine Compartment (All Models)
        • Preliminary Work
        • Installing Sound Absorber For Engine Compartment
      • WM 700819 Removing And Installing Trim Panel For Hood Compartment (CABRIO Models)
        • Preliminary Work
        • Removing Trim Panel For Hood Compartment
          • Removing Hood Compartment Trim
        • Installing Trim Panel For Hood Compartment
          • Installing Hood Compartment Trim
      • WM 701819 Removing And Installing Instrument Panel (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Instrument Panel
          • Removing The Device Carrier
          • Undoing Intermediate Piece For Defroster Cover
          • Removing Instrument Panel
        • Installing Instrument Panel
          • Checking Instrument Panel Clips
          • Installing Instrument Panel
          • Securing Intermediate Piece For Defroster Cover
          • Installing The Device Carrier
        • Subsequent Work
      • WM 701919 Removing And Installing Trim Under Dashboard (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Trim Under The Dashboard On The Driver's Side
          • Notes
          • Disconnecting The Electrical Plug Connections
        • Installing Trim Under Instrument Panel On Driver's Side
          • Locking Electrical Plug Connections
          • Installing Trim Under Dashboard On The Driver's Side
        • Removing And Installing The Cover Under The Instrument Panel On The Passenger's Side
          • Removing The Cover Under The Instrument Panel On The Passenger's Side
          • Installing The Cover Under The Instrument Panel On The Passenger's Side
        • Reworking
      • WM 702019 Removing And Installing Cover For Instrument Panel (Defroster Cover) (All Models)
        • Preliminary Work
        • Removing Cover For Instrument Panel (Defroster Cover)
          • Removing Cover For Centre Instrument Panel (Defroster Cover)
          • Removing Cover For Instrument Panel (Defroster Cover) On Right And Left
        • Installing Cover For Instrument Panel (Defroster Cover)
          • Installing Cover For Instrument Panel (Defroster Cover) On Right And Left
          • Installing Cover For Centre Instrument Panel (Defroster Cover)
        • Subsequent Work
          • Reworking
      • WM 702219 Removing And Installing Cover (Cold Air Bulkhead) (All Models)
        • Removing Cover (Cold Air Bulkhead)
        • Installing Cover (Cold Air Bulkhead)
      • WM 702419 Removing And Installing Front Side Section Trim (All Models)
        • Technical Values
        • Removing Front Side Section Trim
          • Removing Front Side Section Trim Panel (Driver's Side)
          • Removing Front Side Section Trim Panel (Passenger's Side)
        • Installing Front Side Section Trim
          • Installing Front Side Section Trim Panel (Passenger's Side)
          • Installing Front Side Section Trim Panel (Driver's Side)
      • WM 702919 Removing And Installing Trim Panel For Seat Well (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Trim Panel For Seat Well
          • Loosening Seat Belt And Fitting
          • Removing Bushing For Rear Backrest
          • Removing Trim Panel For Seat Well
        • Installing Trim Panel For Seat Well
          • Notes
          • Installing Bushing For Rear Backrest
          • Securing Seat Belt And Fitting
        • Subsequent Work
      • WM 703019 Removing And Installing Front Luggage Compartment Cover (All Models)
        • Preliminary Work
        • Removing Front Luggage Compartment Cover
          • Removing Luggage Compartment Cover
        • Installing Front Luggage Compartment Cover
          • Installing Luggage Compartment Cover
        • Subsequent Work
      • WM 703119 Removing And Installing Rear Wall Trim Panel (All Models)
        • Preliminary Work
        • Removing Rear Wall Trim Panel
        • Subsequent Work
      • WM 703119 Removing And Installing Trim Panel For Rear Wall (Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Trim Panel For Rear Wall
        • Installing Trim Panel For Rear Wall
        • Subsequent Work
      • WM 703355 Replacing Sound Absorber For Seat Well (Except CABRIO)
        • Preliminary Work
        • Installing Sound Absorber For Seat Well
          • Notes
          • Installing Insulation For Seat Well
      • WM 703519 Removing And Installing Footrest (All Models)
        • Removing Footrest
        • Installing Footrest
      • WM 703919 Removing And Installing Cover For Rear Lock Support (TARGA 4 & TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Rear Lock Support
        • Installing Cover For Rear Lock Support
        • Subsequent Work
      • WM 703919 Removing And Installing Cover For Front Lock Mount (All Models)
        • Removing Cover For Lock Mount
        • Installing Cover For Front Lock Mount
          • Installing Cover For Lock Support
          • Additional Assembly Instructions For Replacing Velcro Fasteners
      • WM 704119 Removing And Installing Floor Covering (All Models)
        • Preliminary Work
        • Removing Floor Covering
        • Installing Floor Covering
        • Subsequent Work
      • WM 704555 Replacing Sound Absorber (Insulation) For FLOORPAN Assembly (All Models)
        • Tools
        • Preliminary Work
        • Installing Sound Absorber (Insulation) For Floorpan Assembly
          • Installing Insulation For Floorpan Assembly
      • WM 705155 Replacing Sound Absorber (Insulation) For Passenger Compartment (All Models)
        • Tools
        • Preliminary Work
        • Installing Sound Absorber (Insulation) For Passenger Compartment
          • Installing Sound Absorber For End Plate
          • Installing Seal For Inner Side Section
          • Installing Insulation For Rear Wall
          • Installing Sound Absorber For Spring Strut Mount
          • Installing Sound Absorber For Side Wall
          • Installing Sound Absorber For Firewall Lid
      • WM 705255 Replacing Sound Absorber (Insulation) For Wheel Housing (All Models)
        • Tools
        • Preliminary Work
        • Installing Sound Absorber (Insulation) For Wheel Housing
          • Notes
          • Installing Sound Absorber For Rear Wheel Housing
          • Installing Sound Absorber For Front Wheel Housing
      • WM 705319 Removing And Installing Rear Cover (All Models)
        • Preliminary Work
        • Removing Rear Cover
        • Installing Rear Cover
          • Installing Cover For Rear
        • Subsequent Work
      • WM 705719 Removing And Installing A-Pillar Trim (All Models)
        • Preliminary Work
        • Removing A-Pillar Trim
        • Installing A-Pillar Trim
          • Installing A-Pillar Trim Panel
        • Subsequent Work
      • WM 705719 Removing And Installing A-Pillar Trim Panel (TARGA 4 & TARGA 4S)
        • Preliminary Work
        • Removing A-Pillar Trim Panel
          • Notes
          • Removing Mounting For Fixing Clip
        • Installing A-Pillar Trim Panel
          • Installing Mounting For Fixing Clip
          • Installing A-Pillar Trim Panel
        • Subsequent Work
      • WM 705819 Removing And Installing Trim Strip For The Instrument Panel (All Models)
        • Removing Trim Strip For The Instrument Panel
          • Removing Trim Strip For Dashboard (On Driver's Side)
          • Removing Trim Strip For Dashboard (Cup Holder)
        • Installing Trim Strip For The Instrument Panel
          • Installing Trim Strip For Dashboard (Cup Holder)
          • Installing Trim Strip For Dashboard (On Driver's Side)
      • WM 705919 Removing And Installing Door Panel (All Models)
        • Tools
        • Technical Values
        • Removing Door Panel
          • Removing Trim Panel For Mirror Triangle
          • Removing Lever For Door Opener
          • Removing Covers For Door Panel
          • Releasing Door Panel
          • Disconnecting Electric Plug Connections
          • Removing Actuating Cable For Door Lock
        • Installing Door Panel
          • Replacing Fixing Clips
          • Installing Actuating Cable For Door Lock
          • Locking Electric Plug Connections
          • Installing Door Panel
          • Installing Covers For Door Panel
          • Installing Lever For Door Opener
          • Installing Trim Panel For Mirror Triangle
      • WM 706119 Removing And Installing Cover For Door Panel (All Models)
        • Tools
        • Preliminary Work
          • Notes
          • Removing Cover For Door Panel
          • Installing Cover For Door Panel
        • Subsequent Work
      • WM 706319 Removing And Installing Handle (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Handle
          • Removing Inner Door Handle
          • Disassembling Inner Door Handle
        • Installing Handle
          • Assembling Inner Door Handle
          • Installing Inner Door Handle
          • Installing Handle (Bucket Seat)
        • Subsequent Work
      • WM 706519 Removing And Installing Cover For Oddments Tray (All Models)
        • Preliminary Work
        • Removing Cover For Oddments Tray
          • Removing Lid For Oddments Compartment
        • Installing Cover For Oddments Tray
          • Installing Lid For Oddments Compartment
        • Subsequent Work
      • WM 706719 Removing And Installing B-Pillar Trim (Except CABRIO)
        • Technical Values
        • Removing B-Pillar Trim
          • Removing B-pillar trim panel
        • Installing B-Pillar Trim
          • Installing B-Pillar Trim Panel
      • WM 706819 Removing And Installing C-Pillar Trim (All Models)
        • Technical Values
        • Preliminary Work
          • Notes
          • Loosening Seat Belt And Fitting
        • Removing C-Pillar Trim
          • Removing C-Pillar Trim Panel
        • Installing C-Pillar Trim
          • Installing C-Pillar Trim Panel
        • Subsequent Work
          • Securing Seat Belt And Fitting
          • Subsequent Work
      • WM 707019 Removing And Installing Trim Panel For Mirror Triangle (All Models)
        • Removing Trim Panel For Mirror Triangle
        • Installing Trim Panel For Mirror Triangle
      • WM 707119 Removing And Installing Padding (Bucket Seat) (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removing Padding (Bucket Seat)
        • Installing Padding (Bucket Seat)
        • Subsequent Work
      • WM 707255 Replacing Rear Cover (TARGA 4 & TARGA 4S)
        • Technical Values
        • Removing Rear Cover
        • Installing Rear Trim
          • Installing Rear Cover
      • WM 707519 Removing And Installing Rear Side Trim Panel (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Rear Side Trim Panel
          • Removing Side-Panel Lining At Rear
        • Installing Rear Side Trim Panel
        • Subsequent Work
      • WM 707549 Eliminating Noise Symptoms - Reworking Rear Side Trim Panel (Creaking Noise Between Side Trim Panel And Collar On Rear Seat Backrest Locking Element) (CARR. CABRIO, CARR. S CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Technical Values
        • General Information
          • Symptom
          • Causes And Remedial Action
        • Tools And Materials
          • Materials
        • Reworking Rear Side Trim Panel
        • Working Time
      • WM 708019 Removing And Installing Roof Rail Trim (TARGA 4 & TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Removing Roof Rail Trim
          • Releasing Rear Belt Cover
          • Removing Roof Rail Trim
        • Installing Roof Rail Trim
          • Notes
          • Securing Rear Belt Cover
        • Subsequent Work
      • WM 708119 Removing And Installing Trim Panel For Roll-Over Protection (Speedster)
        • Preliminary Work
        • Removing Trim Panel For Roll-Over Protection
        • Installing Trim Panel For Roll-Over Protection
          • Pre-Fitting Pocket On Roll-Over Protection Trim Panel
          • Installing Trim Panel For Roll-Over Protection
          • Sticking On Protective Film
        • Subsequent Work
      • Template With Protective Film (All Models)
      • WM 708219 Removing And Installing Front Trim (TARGA 4 & TARGA 4S)
        • Technical Values
        • Preliminary Work
          • Notes
          • Removing Front Trim Panel
        • Installing Front Trim
          • Installing Front Trim Panel
        • Subsequent Work
      • WM 708319 Removing And Installing Front Roof Trim Panel (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Front Roof Trim Panel
        • Installing Front Roof Trim Panel
        • Subsequent Work
      • WM 708419 Removing And Installing Roof Lining (Except CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Roof Lining
          • Removing Cover For Motor For Sliding Roof
          • Disconnecting Electric Plug Connection
          • Removing Mounting Saddle And Pivot Bearing For Sun Visor
          • Removing Headliner
        • Installing Roof Lining
          • Fitting Headliner
          • Installing Mounting Saddle And Pivot Bearing For Sun Visor
          • Locking Electric Plug Connection
          • Installing Cover For Sunroof Motor
        • Subsequent Work
      • WM 708519 Removing And Installing Rear Roof Lining (Except CABRIO)
        • Removing Rear Roof Lining
          • Removing Rear Roof Trim Panel
        • Installing Rear Roof Lining
          • Installing Rear Roof Trim Panel
      • WM 708519 Removing And Installing Rear Roof Trim Panel (TARGA 4 & TARGA 4S)
        • Removing Rear Roof Trim Panel
        • Installing Rear Roof Trim Panel
      • WM 708619 Removing And Installing Slide/Tilt Sunroof Trim (Except CABRIO)
        • Preliminary Work
        • Removing Slide/Tilt Sunroof Trim
        • Additional Instructions For Removing The Inner Panels
        • Installing Slide/Tilt Sunroof Trim
          • Additional Instructions For Fitting The Inner Panels
          • Installing Slide/Tilt Sunroof Trim
        • Subsequent work
      • WM 708619 Removing And Installing Trim Panel For Sliding/Lifting Roof (TARGA 4 & TARGA 4S)
        • Removing Trim Panel For Sliding/Lifting Roof
        • Installing Trim Panel For Sliding/Lifting Roof
  • Interior/Illumination Lights
    • 96 - Lights, Lamps, Switches, Interior -- CARRERA (997)
      • WM 960719 Removing And Installing Contact Switch For Glove Compartment Light(All Models)
        • Preliminary work
        • Removing contact switch for glove compartment light
        • Installing contact switch for glove compartment light
        • Subsequent work
      • WM 961519 Removing And Installing FOOTWELL Light (All Models)
        • Removing footwell light
        • Installing footwell light
      • WM 961619 Removing And Installing Door Warning Light(All Models)
        • Removing bulb for door warning light
          • Removing door warning light
          • Removing bulb for door warning light
        • Installing bulb for door warning light
          • Notes
          • Installing door warning light
      • WM 962219 Removing And Installing Bulb For Interior Light(All Models)
        • Removing bulb for interior light
          • Notes
          • Removing lens for interior light
          • Removing bulb for interior light
        • Installing bulb for interior light
          • Notes
          • Installing lens for interior light
          • Installing interior light
      • WM 962719 Removing And Installing Switch Console (All Models)
        • Preliminary work
        • Removing switch console
        • Installing switch console
        • Subsequent work
      • WM 964155 Removing And Installing Bulb For Luggage Compartment Light(All Models)
        • Removing bulb for luggage compartment light
          • Removing luggage compartment light
          • Removing bulb for light
        • Installing bulb for luggage compartment light
          • Installing bulb for light
          • Installing luggage compartment light
      • WM 964355 Replacing Bulb For Engine Compartment Light(All Models)
        • Removing bulb for engine compartment light
          • Removing engine compartment light
          • Removing bulb for light
        • Installing bulb for engine compartment light
          • Installing bulb for light
          • Installing engine compartment light
      • WM 964419 Removing And Installing Glove Compartment Light(All Models)
        • Removing glove compartment light
        • Installing glove compartment light
      • WM 964719 Removing And Installing Bulb For Reading Light (All Models)
        • Removing bulb for reading light
          • Removing interior light
          • Removing bulb for reading light
        • Installing bulb for reading light
          • Notes
          • Installing interior light
      • WM 966021 Removing Main Switch For Power Supply(All Models)
        • Technical values
        • Removing main switch for power supply
          • Removing main power supply switch
        • Information
          • Switching on vehicle electrical system
          • Switching off vehicle electrical system
      • WM 966225 Teaching Hand-Held Transmitter (All Models)
        • Teaching remote control
      • WM 966237 Disassembling And Assembling Remote Control (All Models)
        • Disassembling remote control
        • Assembling remote control
      • WM 966255 Replacing Hand-Held Transmitter (All Models)
        • Disassembling hand-held transmitter
          • Removing cover of hand-held transmitter
          • Removing hand-held transmitter key
          • Removing battery for hand-held transmitter
        • Assembling hand-held transmitter
          • Installing battery for hand-held transmitter
          • Installing hand-held transmitter key
          • Installing cover of hand-held transmitter
      • WM 966319 Removing And Installing Tilt Sensor Control Unit(All Models)
        • Technical values
        • Preliminary work
        • Removing tilt sensor control unit
        • Installing tilt sensor control unit
        • Subsequent work
      • WM 966519 Removing And Installing Alarm Siren (All Models)
        • Technical values
        • Preliminary work
        • Removing alarm horn
          • Notes
          • Removing alarm siren
        • Installing alarm siren
          • Notes
          • Installing alarm siren
        • Subsequent work
      • WM 966619 Removing And Installing KESSY/Pas Control Unit (All Models)
        • Tools
        • Information
          • Control unit information for KESSY/PAS
        • Programming KESSY/PAS control unit
          • Obtaining read-out and saving vehicle data from control unit
          • Programming new KESSY/PAS control unit
        • Removing KESSY/PAS control unit
        • Installing KESSY/PAS control unit
      • WM 967819 Removing And Installing Control Unit For Garage Door Opener (All Models)
        • Removing control unit for garage door opener
        • Installing control unit for garage door opener
      • WM 967919 Removing And Installing Control Unit For Garage Door Opener/HOMELINK (All Models)
        • Preliminary work
          • Preliminary work for control unit for garage door opener/HomeLink
        • Removing control unit for garage door opener/HomeLink
          • Removing control unit for garage door opener/HomeLink
        • Installing control unit for garage door opener/HomeLink
        • Subsequent work
          • Subsequent work for control unit for garage door opener/HomeLink
        • Teaching control unit for garage door opener/HomeLink
          • HomeLink
        • Assigning garage door opener/HomeLink signals to buttons
          • Garage door opener/HomeLink with fixed code system
          • Garage door opener/HomeLink with variable code system
          • Re-programming an individual button
          • Erasing programmed signals on the HomeLink
          • Diagnostics
      • WM 968519 Removing And Installing Interior Monitoring Sensor(All Models)
        • Tools
        • Preliminary work
          • Preliminary work for interior monitoring sensor
        • Removing interior monitoring sensor
        • Installing interior monitoring sensor
        • Subsequent work
          • Subsequent work for interior monitoring sensor
          • Coding interior monitoring sensor
  • Seats
    • 72 - Seat Frames -- CARRERA (997)
      • WM 720119 Removing And Installing Bucket Seat (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Removing Bucket Seat
          • Loosening Seat Belt Mount On Bucket Seat
          • Undoing Seat Screws At The Rear
          • Removing Seat Rail Cover
          • Undoing Seat Screws At The Front
          • Disconnecting Plug Connection On Bucket Seat
        • Installing Bucket Seat
          • Locking Plug Connection On Bucket Seat
          • Tightening Seat Screws At The Front
          • Installing Seat Rail Cover
          • Tightening Seat Screws At The Rear
          • Securing Seat Belt Mount On Bucket Seat
      • WM 720119 Removing And Installing Folding Sports Bucket Seat (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Folding Sports Bucket Seat
          • Loosening Seat Belt Mount On Sports Bucket Seat
          • Loosening Sports Bucket Seat
          • Disconnecting Plug Connection For AWS Control Unit
          • Disconnecting Central Connector
        • Installing Folding Sports Bucket Seat
          • Locking Central Connector
          • Locking Plug Connection For AWS Control Unit
          • Securing Sports Bucket Seat
          • Securing Seat Belt Mount To The Sports Bucket Seat
      • WM 720119 Removing And Installing Front Seat (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Front Seat
          • Removing Seat Rail Cover
          • Undoing Seat Screws At Front
          • Undoing Seat Screws At Rear
          • Releasing Electrical Wire
          • Disconnecting Central Plug
          • Disconnecting Electrical Plug Connection (Power Seat)
          • Disconnecting The Electrical Plug Connection Of The AWS Control Module
        • Installing Front Seat
          • Fastening Electric Line
          • Locking The Electrical Plug Connection Of The AWS Control Module
          • Connecting Electrical Plug Connection (Power Seat)
          • Locking Central Plug
          • Tightening Seat Screws At Rear
          • Tightening Seat Screws At The Front
          • Fit Seat Rail Cover
        • Subsequent Work
      • WM 720155 Disassembling And Assembling Bucket Seat (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Preliminary Work
        • Disassembling Bucket Seat
          • Removing Cover For Seatbelt Support (Bucket Seat)
          • Removing Cover For Belt Guide (Bucket Seat)
          • Removing Seat Cushion (Bucket Seat)
        • Assembling Bucket Seat
          • Installing Seat Cushion (Bucket Seat)
          • Installing Cover For Belt Guide (Bucket Seat)
          • Installing Cover For Seatbelt Support (Bucket Seat)
        • Subsequent Work
      • WM 7201IN Mounting Front Seat On Assembly Fixture (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Mounting Front Seat On Assembly Fixture
      • WM 720619 Removing And Installing Air Cushion Switch (Except CARRERA 4 GTS, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Air Cushion Switch
          • Removing Control Unit For Memory Seat Adjustment With Support
          • Removing Switch For Air Cushion
        • Installing Air Cushion Switch
          • Installing Switch For Air Cushion
          • Installing Control Unit For Memory Seat Adjustment With Support
        • Subsequent Work
      • WM 720919 Removing And Installing Front Seat Frame (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Seat Frame
        • Installing Front Seat Frame
        • Subsequent Work
      • WM 720955 Replacing Front Seat Frame (Bucket Seat) (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Front Seat Frame (Bucket Seat)
        • Installing Front Seat Frame (Bucket Seat)
        • Subsequent Work
      • WM 720955 Replacing Front Seat Frame (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Disassembling Seat Frame
          • Installing Frame For Seat Surface
          • Removing Backrest Frame
        • Assembling Seat Frame
          • Installing Backrest Frame
          • Installing Frame For Seat Surface
        • Subsequent Work
      • WM 720955 Replacing Front Seat Frame (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Seat Frame
        • Installing Front Seat Frame
        • Subsequent Work
      • WM 720955 Replacing Seat Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Disassembling Seat Frame
          • Removing Cover For AWS Sensor On Left And Right
          • Removing Frame For Seat Surface
          • Removing Backrest Frame
        • Assembling Seat Frame
          • Installing Backrest Frame
          • Installing Frame For Seat Surface
          • Installing Cover For AWS Sensor On Left And Right
        • Subsequent Work
      • WM 721155 Replacing Guide Rail (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Guide Rail
          • Notes
          • Removing Guide Rail (Passenger Seat With Seat Occupancy Detection)
        • Installing Guide Rail
          • Installing Guide Rail (Passenger Seat With Seat Occupancy Detection)
          • Installing Guide Rail
        • Subsequent Work
      • WM 721419 Removing And Installing Air Cushion For Seat (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Air Cushion For Seat
        • Installing Air Cushion For Seat
        • Subsequent Work
      • WM 721619 Removing And Installing Control Module Trim Panel (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Control Module Trim panel
          • Preliminary Work
          • Removing Control Part Trim Panel
          • Removing Control Part Trim Panel (With Mechanical Lever)
        • Installing Control Module Trim Panel
          • Installing Control Part Trim Panel
          • Installing Control Part Trim Panel (Mechanical)
          • Subsequent Work
      • WM 721719 Removing And Installing Air Cushion For Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Air Cushion For Backrest
          • Notes
          • Removing Hose For Air Cushion Control Valve
        • Installing Air Cushion For Backrest
          • Installing Hose For Air Cushion Control Valve
          • Installing Air Cushion For Backrest
          • Checking Seat Following Removal
        • Subsequent Work
      • WM 721955 Replacing Backrest Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Disassembling Backrest Frame
          • Removing Foam Part
          • Removing Supports For Backrest Side Parts
          • Removing Inner Spring On Backrest Frame
          • Disconnecting Wire Harnesses On Backrest Frame
          • Removing Frame For Side Airbag
          • Disassembling Backrest Frame
          • Removing Backrest Frame
        • Assembling Backrest Frame
          • Installing Backrest Frame
          • Assembling Backrest Frame
          • Installing Frame For Side Airbag
          • Securing Wire Harnesses On Backrest Frame
          • Installing Inner Spring On Backrest Frame
          • Installing Supports For Backrest Side Parts
          • Fitting Foam Part
        • Subsequent Work
      • WM 721955 Replacing Backrest Frame (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Disassembling Backrest Frame
          • Removing Inner Spring On Backrest Frame
          • Removing Frame For Side Airbag
          • Disassembling Backrest Frame
          • Removing Backrest Frame
        • Assembling Backrest Frame
          • Installing Backrest Frame
          • Assembling Backrest Frame
          • Installing Frame For Side Airbag
          • Installing Inner Spring On Backrest Frame
        • Subsequent Work
      • WM 722419 Removing And Installing Cushion Carrier For Front Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
          • Notes
          • Preliminary Work
        • Removing Cushion Carrier For Front Backrest
          • Notes
          • Removing Cushion Carrier For Front Backrest
        • Installing Cushion Carrier For Front Backrest
          • Notes
          • Installing Cushion Carrier For Front Backrest
        • Subsequent Work
          • Notes
          • Subsequent Work
      • WM 722419 Removing And Installing Cushion Carrier For Front Backrest (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Preliminary Work
        • Removing Cushion Carrier For Front Backrest
        • Installing Cushion Carrier For Front Backrest
        • Subsequent Work
      • WM 722419 Removing And Installing Cushion Carrier For Front Backrest (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Cushion Carrier For Front Backrest
        • Installing Cushion Carrier For Front Backrest
        • Subsequent Work
      • WM 722455 Replacing Cushion Carrier For Front Backrest (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Disassembling Cushion Carrier For Front Backrest
          • Removing Collar For Backrest Release
        • Assembling Cushion Carrier For Front Backrest
          • Installing Collar For Backrest Release
        • Subsequent Work
      • WM 722519 Removing And Installing BOWDEN Cable For Backrest Release (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Bowden Cable For Backrest Release
          • Notes
          • Removing Backrest Frame Release
        • Installing Bowden Cable For Backrest Release
          • Installing Backrest Frame Release
          • Installing Bowden Cable For Backrest Release
        • Subsequent Work
          • Reworking
      • WM 722519 Removing And Installing BOWDEN Cable For Backrest Release (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Bowden Cable For Backrest Release
        • Installing Bowden Cable For Backrest Release
        • Subsequent Work
      • WM 722619 Removing And Installing Cover For Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Cover For Backrest
          • Preliminary Work
          • Removing Cover For Outer Backrest
          • Removing Cover For Inner Backrest
        • Installing Cover For Backrest
          • Installing Cover For Inner Backrest
          • Installing Cover For Outer Backrest
          • Subsequent Work
      • WM 722819 Removing And Installing Height Adjustment Lever (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Height Adjustment Lever
        • Installing Height Adjustment Lever
      • WM 722955 Replacing Retainer Plate For Seat Adjustment Motor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Retainer Plate For Seat Adjustment Motor
          • Removing Retainer Plate
        • Installing Retainer Plate For Seat Adjustment Motor
          • Installing Retainer Plate
        • Subsequent Work
      • WM 723119 Removing And Installing Control Button For Backrest Release (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Control Button For Backrest Release
        • Installing Control Button For Backrest Release
      • WM 723119 Removing And Installing Loop For Backrest Release (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Loop For Backrest Release
        • Installing Loop For Backrest Release
        • Subsequent Work
      • WM 723219 Removing And Installing Lock For Backrest Adjustment (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Lock For Backrest Adjustment
          • Removing Upper Part Of Lock
          • Removing Lower Part Of Lock
        • Installing Lock For Backrest Adjustment
          • Installing Lower Part Of Lock
          • Installing Upper Part Of Lock
        • Adjusting Lock For Backrest Adjustment
          • Adjusting Upper/Lower Part Of Lock
        • Subsequent Work
      • WM 723319 Removing And Installing Control Valve For Lumbar Support Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Control Valve For Lumbar Support Adjustment
          • Taking Off Foam Part
          • Removing Control Valve For Lumbar Support Adjustment
        • Installing Control Valve For Lumbar Support Adjustment
          • Notes
          • Checking Seat Following Removal
          • Fitting Foam Part
        • Subsequent Work
          • Reworking
      • WM 723419 Removing And Installing Lumbar Support (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Lumbar Support
          • Taking Off Foam Part
          • Removing Lumbar Support
        • Installing Lumbar Support
          • Notes
          • Checking Seat Following Removal
          • Fitting Foam Part
        • Subsequent Work
          • Reworking
      • WM 723619 Removing And Installing Motor For Lumbar Support (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Motor For Lumbar Support
          • Removing Support For Left Backrest Side Part
          • Taking Off Foam Part
          • Removing Motor For Lumbar Support
        • Installing Motor For Lumbar Support
          • Notes
          • Checking Seat Following Removal
          • Fitting Foam Part
          • Installing Support For Left Backrest Side Part
        • Subsequent Work
      • WM 723819 Removing And Installing Control Valve For Air Cushion (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Control Valve For Air Cushion
        • Installing Control Valve For Air Cushion
        • Subsequent Work
      • WM 723919 Removing And Installing Motor For Air Cushion (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Motor For Air Cushion
          • Removing Air Cushion Motor
        • Installing Motor For Air Cushion
          • Installing Air Cushion Motor
        • Subsequent Work
      • WM 724719 Removing And Installing Rear Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Rear Backrest
        • Installing Rear Backrest
        • Subsequent Work
      • WM 726319 Removing And Installing Locking Mechanism For Rear Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Locking Mechanism For Rear Backrest
        • Installing Locking Mechanism For Rear Backrest
        • Subsequent Work
      • WM 728619 Removing And Installing Switch For Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Switch For Seat Adjustment
        • Installing Switch For Seat Adjustment
        • Subsequent Work
      • WM 728719 Removing And Installing Motor For Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Motor For Seat Adjustment
        • Installing Motor For Seat Adjustment
        • Subsequent Work
      • WM 728819 Removing And Installing Motor For Front Vertical Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Motor For Front Vertical Adjustment
          • Removing Control Unit For Memory Seat Adjustment With Support
          • Removing Motor For Front Vertical Adjustment
        • Installing Motor For Front Vertical Adjustment
          • Notes
          • Installing Control Unit For Memory Seat Adjustment With Support
        • Subsequent Work
      • WM 728919 Removing And Installing Motor For Backrest Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Motor For Backrest Adjustment
          • Removing Backrest Side Support
          • Removing Motor For Backrest Adjustment
        • Installing Motor For Backrest Adjustment
          • Notes
          • Checking Seat Following Removal
          • Installing Backrest Side Support
        • Subsequent Work
      • WM 729219 Removing And Installing Motor For Rear Vertical Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Motor For Rear Vertical Adjustment
        • Installing Motor For Rear Vertical Adjustment
        • Subsequent Work
      • WM 729319 Removing And Installing Control Unit For Memory Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Control Unit For Memory Seat Adjustment
        • Removing Control Unit For Memory Seat Adjustment
        • Installing Control Unit For Memory Seat Adjustment
        • Subsequent Work
          • Subsequent Work For Control Unit For Memory Seat Adjustment
        • Programming Control Unit
          • Reading Out And Printing Out Values
          • Programming Control Unit
      • WM 729419 Removing And Installing Switch For Memory Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Switch For Memory Seat Adjustment
        • Installing Switch For Memory Seat Adjustment
    • 74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)
      • WM 740919 Removing And Installing Suction Fan For Seat Surface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Suction Fan For Seat Surface
          • Removing Suction Fan For Seat Surface (Driver's Side)
          • Removing Suction Fan For Seat Surface (Passenger's Side)
        • Installing Suction Fan For Seat Surface
          • Installing Suction Fan For Seat Surface (Driver's Side)
          • Installing Suction Fan For Seat Surface (Passenger's Side)
        • Subsequent Work
      • WM 741019 Removing And Installing Padding For Front Seat (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Seat
          • Disconnecting Wire Harness For Heated Seats
          • Removing Padding For Seat
        • Installing Padding For Front Seat
          • Installing Padding For Seat
          • Securing Wire Harness For Heated Seats
          • Checking Seat Following Removal
        • Subsequent Work
      • WM 741019 Removing And Installing Padding For Front Seat (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Seat
          • Disconnecting Wire Harness For Heated Seats
          • Removing Padding For Front Seat
        • Installing Padding For Front Seat
          • Notes
          • Securing Wire Harness For Heated Seats
        • Subsequent Work
          • Checking Seat Following Removal
          • Subsequent Work
      • WM 741055 Replacing Padding For Front Seat (Folding Sports Bucket Seat) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Seat
          • Removing Seat Cushion Padding (Front Part)
          • Removing Seat Cushion Padding (Rear Part)
          • Removing Padding For Side Bolsters
        • Installing Padding For Front Seat
          • Installing Padding For Side Bolsters
          • Installing Seat Cushion Padding (Rear Part)
          • Installing Padding For Seat Cushion (Front Part)
        • Subsequent Work
      • WM 741319 Removing And Installing Cover For Front Seat (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Preliminary Work
        • Removing Cover For Front Seat
        • Installing Cover For Front Seat
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • WM 741319 Removing And Installing Cover For Front Seat (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Cover For Front Seat
        • Installing Cover For Front Seat
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • WM 741319 Removing And Installing Cover For Front Seat (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Preliminary Work
        • Removing Cover For Front Seat
          • Removing Seat Cushion (Front Part)
          • Removing Seat Cushion (Rear Part)
          • Removing Cover For Side Of Seat
        • Installing Cover For Front Seat
          • Installing Cover For Side Of Seat
          • Installing Seat Cushion (Rear Part)
          • Installing Seat Cushion (Front Part)
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • Driver's Manual Enclosure
        • Care Instructions For Water Stains And Damp Stops On Seats With Seat Ventilation
      • WM 7413N0 Eliminating Symptoms In Body Interior: Reworking Seat Cover On Air-Conditioned Seat (I-No. 541) (Spots On Seat Cover/SY0411) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • General Information
          • Symptom
          • Causes And Remedial Action
            • Notes
            • Remedial Action
        • Tools And Materials
      • WM 741519 Removing And Installing Cover For Suction Fan For Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Cover For Suction Fan For Backrest
          • Notes
          • Disassembling Cover For Suction Fan
        • Installing Cover For Suction Fan For Backrest
          • Assembling Cover For Suction Fan
          • Installing Cover For Suction Fan For Backrest
      • WM 741619 Removing And Installing Suction Fan For Backrest Surface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Suction Fan For Backrest Surface
        • Installing Suction Fan For Backrest Surface
        • Subsequent Work
      • WM 741719 Removing And Installing Padding For Front Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Backrest
          • Releasing Wire Harness For Backrest Seat Heating
          • Removing Padding For Front Backrest
        • Installing Padding For Front Backrest
          • Notes
          • Installing Padding For Front Backrest
          • Securing Wire Harness For Backrest Seat Heating
          • Checking Seat Following Removal
        • Subsequent Work
      • WM 741719 Removing And Installing Padding For Front Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Backrest
        • Installing Padding For Front Backrest
        • Subsequent Work
      • WM 741719 Removing And Installing Padding For Front Backrest (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Backrest
        • Installing Padding For Front Backrest
        • Subsequent Work
      • WM 741819 Removing And Installing Padding For Front Middle Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Middle Backrest
        • Installing Padding For Front Middle Backrest
        • Subsequent Work
      • WM 741819 Removing And Installing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Middle Backrest
        • Installing Padding For Front Middle Backrest
        • Subsequent Work
      • WM 741855 Replacing Padding For Front Middle Backrest (Folding Sports Bucket Seat) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Middle Backrest
        • Installing Padding For Front Middle Backrest
        • Subsequent Work
      • WM 741919 Removing And Installing Cover For Front Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Preliminary Work
          • Notes
          • Preliminary Work
        • Removing Cover For Front Backrest
          • Notes
          • Removing Guide For Seat Belt
          • Removing Cover For Front Backrest
        • Installing Cover For Front Backrest
          • Installing Cover For Backrest
          • Installing Guide For Seat Belt
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • WM 741919 Removing And Installing Cover For Front Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Cover For Front Backrest
        • Installing Cover For Front Backrest
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Checking Seat Following Removal
          • Subsequent Work
      • WM 741919 Removing And Installing Cover For Front Backrest (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Preliminary Work
        • Removing Cover For Front Backrest
        • Installing Cover For Front Backrest
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • WM 742019 Removing And Installing Cover For Front Middle Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Cover For Front Middle Backrest
        • Installing Cover For Front Middle Backrest
      • WM 742019 Removing And Installing Cover For Front Middle Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Cover For Front Middle Backrest
        • Installing Cover For Front Middle Backrest
      • WM 742019 Removing And Installing Cover For Front Middle Backrest (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Cover For Front Middle Backrest
        • Installing Cover For Front Middle Backrest
      • WM 742319 Removing And Installing Backrest Pocket (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Backrest Pocket
          • Removing Cover For Front Middle Backrest
          • Removing Backrest Pocket
          • Replacing Cover For Backrest Pocket
        • Installing Backrest Pocket
          • Notes
          • Installing Cover For Front Middle Backrest
      • WM 742819 Removing And Installing Heating Element For Front Seat (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Information
          • Spare Parts Information
      • WM 742919 Removing And Installing Heating Element For Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Information
          • Spare Parts Information
      • WM 745719 Removing And Installing Rear Seat Cushion (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Rear Seat Cushion
          • Removing Back Seat Cushion
        • Installing Rear Seat Cushion
          • Installing Back Seat Cushion
  • Window Motors & Regulators
    • 64 - Glazing, Window Control -- CARRERA (997)
      • WM 6400IN General Information On Installing And Removing Car Windows (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Tools
        • Removing Glass With Cutting Wire Separator
          • Danger Of Injury When Working On Vehicle Windows
          • Material Damage When Removing The Glass From Car Windows
          • Removing Glass With Cutting Device - Wire Separator
          • Applying Protective Film To The Dashboard
          • Guiding Cutting Thread Into The Passenger Compartment
          • Guiding Cutting Thread Into The Gap In The Glass
          • Attaching Cutting Thread To The Body
          • Attaching Cutting Thread To The Spooling Device
          • Installing Spooling Device And Deflection Rollers On The Glass
          • Separating Glass As Far As P1
          • Repositioning Spooling Device
          • Separating Glass As Far As P2
          • Separating Glass As Far As P3
          • Separating Glass As Far As P4
          • Separating Glass As Far As P5
          • Cutting Power When Removing Glass With Cutting Thread
      • WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Removing Windscreen
          • Removing Spacer Blocks
          • Removing Windscreen
        • Preparing Window Aperture For Installation
          • Removing Adhesive From The Body
        • Preparing Windscreen For Installation
          • Removing Windscreen Seal
          • Removing Adhesive From The Windscreen
          • Fitting Windscreen Seal
          • Marking The Bonding Area
          • Activating The Bonding Section Of The Windscreen
          • Priming The Windscreen
        • Installing Windscreen
          • Preliminary Work Before Windscreen Installation
          • Fitting Windscreen Into The Body
          • Preparing 2-Component Adhesive For Processing
          • Applying Adhesive To The Windscreen
          • Pulling Off Protective Film
          • Inserting Windscreen Into The Body
          • Cleaning Fields Of Vision
        • Subsequent Work
      • WM 6412IN Processing Of PORSCHE 2-Component Window Bonding Agents WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Pre-Treatment Of Bonding Surfaces
          • Pre-Treating Adhesive Flanges On Vehicle Windows
          • Pre-Treating Bonded Flanges On The Vehicle Body
        • Handling Processing Device
          • Double Cartridge Press
      • WM 641623 Installing Seal For Windscreen WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Installing Seal For Windscreen
          • Fitting Seal For Windscreen
      • WM 642119 Removing And Installing Closing Aid (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Closing Aid
        • Removing Closing Aid
        • Installing Closing Aid
        • Subsequent Work
          • Subsequent Work For Closing Aid
      • WM 643719 Removing And Installing Microswitch For Window Opening Controls (Except 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Microswitch For Window Opening Controls
          • Unclipping Electric Wire For Micro Switches
          • Removing Microswitch For Window Opening Controls
        • Installing Microswitch For Window Opening Controls
          • Notes
          • Clipping In The Electric Wire For Micro Switches
        • Subsequent Work
      • WM 644015 Adjusting Front Door Window (Except 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Adjusting Front Door Window
        • Subsequent Work
      • WM 644019 Removing And Installing Front Door Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Door Window
        • Installing Front Door Window
          • Notes
          • Securing Front Door Window
          • Inserting Door Trim Panel
          • Standardizing The Power Windows
          • Blockage Detection Function
          • Precondition For Operation Of The Power Windows
        • Subsequent Work
      • WM 644049 Reworking (Coating) Front Door Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • General Warning Notes
          • Warning Note On Hydrophobic Window
          • Checking Front Door Window
        • Preliminary Work
          • Preparing Components For Processing
          • Cleaning Window Surfaces
          • Reworking (Coating) Front Door Window
      • WM 644819 Removing And Installing The Front Window Shaft Seal (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing The Front Window Shaft Seal
        • Installing The Front Window Shaft Seal
      • WM 645219 Removing And Installing Front Power Windows (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Power Windows
        • Installing Front Power Windows
          • Adjusting The Lower Stop Of The Power Window Unit
          • Installing Front Power Windows
        • Subsequent Work
      • WM 645419 Removing And Installing Power Window Motor (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Power Window Motor
        • Removing Power Window Motor
        • Installing Power Window Motor
        • Subsequent Work
          • Subsequent Work For Window Power Motor
        • Programming Power Window Motor (Door Control Unit)
          • Reading From And Writing To The Power Windows Motor (Door Control Unit)
        • Coding Power Window Motor (Door Control Unit)
          • Coding The Power Windows Motor (Door Control Unit)
      • WM 645819 Removing And Installing Switch For Power Windows (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Switch For Power Windows
        • Installing Switch For Power Windows
        • Subsequent Work
      • WM 646119 Removing And Installing Rear Power Window Motor (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Rear Power Window Motor
        • Installing Rear Power Window Motor
        • Subsequent Work
      • WM 647119 Removing And Installing Rear Window Lifter (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Rear Window Lifter
          • Loosening Hydraulic Cylinder
          • Removing Rear Window Lifter
        • Installing Rear Window Lifter
          • Notes
          • Installing Hydraulic Cylinder
        • Adjusting Rear Power Windows Mechanism
        • Additional Instructions For Adjusting Or Replacing The Rear Window Lifter
        • Subsequent Work
      • WM 647119 Removing And Installing Rear Power Windows Mechanism (911 Speedster)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Rear Power Windows Mechanism
        • Installing Rear Power Windows Mechanism
        • Adjusting Rear Power Windows Mechanism
        • Additional Instructions For Adjusting Or Replacing The Rear Power Windows Mechanism
          • Additional Instructions For Adjusting Or Replacing The Rear Window Lifter
        • Subsequent Work
      • WM 647519 Removing And Installing Rear Side Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rear Side Window
          • Removing Side Window
        • Installing Rear Side Window
          • Installing Side Window
        • Subsequent Work
      • WM 647619 Removing And Installing Side Window Seal (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Removing Side Window Seal
          • Notes
          • Loosening Sound Absorber
          • Removing Seal For Roof Frame
        • Installing Side Window Seal
          • Installing Seal For Roof Frame
          • Securing Sound Absorber
          • Installing Side Window Seal
        • Subsequent Work
      • WM 647619 Removing And Installing Inner Side-Window Seal (911 TARGA 4, 911 TARGA 4S)
        • Preliminary Work
        • Removing Inner Side-Window Seal
        • Installing Inner Side-Window Seal
        • Subsequent Work
      • WM 647619 Removing And Installing Outer Side-Window Seal (Upper Part) (911 TARGA 4, 911 TARGA 4S)
        • Preliminary Work
        • Subsequent Work
      • WM 647619 Removing And Installing Outer Side-Window Seal (Lower Part) (911 TARGA 4, 911 TARGA 4S)
        • Preliminary Work
        • Subsequent Work
      • WM 648601 Checking Function Of Heated Rear Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Checking Function Of Heated Rear Window
          • Check With The Temperature Probe
      • WM 648615 Adjusting Rear Window Cover (911 TARGA 4, 911 TARGA 4S)
        • Tools
        • Technical Values
        • Adjusting Rear Window Cover
      • WM 648619 Removing And Installing Rear Window Cover (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Removing Rear Window Cover
        • Installing Rear Window Cover
        • Subsequent Work
      • WM 648619 Removing And Installing Rear Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Removing Rear Window
          • Overview
          • Preparing The Rear Window (Hardtop) For Removal
          • Removing Rear Window
        • Preparing Window Aperture For Installation
          • Removing Adhesive From The Body
          • Cleaning And Priming Paint Damage Or Newly Built-Up Paint Areas In The Window Aperture Of The Body
          • Removing Adhesive On The Hardtop Body
          • Cleaning And Priming Paint Damage Or Newly Built-Up Paint Areas In The Window Aperture Of The Hardtop Body
        • Preparing Rear Window For Installation
          • Removing Seal For Rear Window
          • Removing Adhesive From The Rear Window
          • Fitting Seal For Rear Window
          • Applying Activator To The Bonding Section Of The Rear Window
          • Fitting Cover Section
        • Installing Rear Window
          • Aligning Rear Window
          • Preparing 2-Component Adhesive For Processing
          • Applying Adhesive On The Rear Window
          • Pulling Off Protective Film
          • Inserting Rear Window Into The Body
          • Cleaning Fields Of Vision
          • Inserting Rear Window Into The Hardtop Body
          • Completing The Rear Window (Hardtop) After Installation
        • Subsequent Work
        • Technical Values
      • WM 649023 Installing Seal For Rear Window (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Installing Seal For Rear Window
          • Fitting Seal For Rear Window
      • WM 649519 Removing And Installing Rear Pneumatic Spring (911 TARGA 4, 911 TARGA 4S)
        • Removing Rear Pneumatic Spring
          • Removing Rear Gas Spring At The Lid
          • Removing Rear Gas Spring At The Body
        • Installing Rear Pneumatic Spring
          • Installing Rear Gas Spring At The Body
          • Installing Rear Gas Spring At The Lid
        • Checking Rear Gas Spring
          • Checking Operation Of Rear Gas Springs
  • Wiper/Washer Systems
    • 92 - Windshield Wiper And Washer System -- CARRERA (997)
      • WM 921219 Removing And Installing Rain Sensor (All Except 911 Gt3 RS 4.0)
        • Removing rain sensor
        • Installing rain sensor
      • WM 921519 Removing And Installing Wiper Motor (All Except 911 Gt3 RS 4.0)
        • Technical values
        • Preliminary work on wiper motor
        • Removing wiper motor
        • Installing wiper motor
        • Reworking wiper motor
          • Touching up wiper motor
      • WM 921919 Removing And Installing Wiper Link (All Except 911 Gt3 RS 4.0)
        • Technical values
        • Preliminary work
          • Preliminary work on wiper motor
          • Preliminary work for wiper linkage
        • Removing wiper link
        • Installing wiper link
          • Installing wiper linkage
        • Subsequent work
          • Reworking wiper link
      • WM 922515 Adjusting Wiper Arm Attack Angle (All Except 911 Gt3 RS 4.0)
        • Tools
        • Preliminary work
          • Preliminary work for adjusting wiper arm attack angle
        • Adjusting wiper arm
          • Adjusting wiper arm attack angle
        • Subsequent work
          • Subsequent work for adjusting wiper arm attack angle
      • WM 922519 Removing And Installing Wiper Arm (All Except 911 Gt3 RS 4.0)
        • Technical values
        • Removing wiper arm
        • Installing wiper arm
      • WM 922719 Removing And Installing Wiper Blade (All Except 911 Gt3 RS 4.0)
        • Removing wiper blade
        • Installing wiper blade
      • WM 923419 Removing And Installing Wiper Motor For Rear Window Washer (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 Gt3, 911 Turbo S Coupe, 911 Gt2, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style")
        • Technical values
        • Preliminary work
          • Preliminary work for wiper motor for rear window wiper system
        • Removing wiper motor for rear window washer
          • Removing wiper arm for rear window wiper system
        • Installing wiper motor for rear window washer
          • Installing the wiper motor for rear window wiper system
        • Subsequent work
          • Reworking wiper motor for rear window wiper system
      • WM 924119 Removing And Installing Wiper Arm For Rear Window Washer (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 Gt3, 911 Turbo S Coupe, 911 Gt2, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style")
        • Technical values
        • Removing wiper arm for rear window washer system
        • Installing wiper arm for rear window washer system
      • WM 924319 Removing And Installing Wiper Blade For Rear Window Washer (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 Gt3, 911 Turbo S Coupe, 911 Gt2, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style")
        • Removing wiper blade for rear window washer system
        • Installing wiper blade for rear window washer system
      • WM 925619 Removing And Installing Pump For Windscreen Washer System (All Except 911 Gt3 RS 4.0)
        • Tools
        • Preliminary work
        • Removing pump for windscreen washer system
        • Installing pump for windscreen washer system
        • Subsequent work
      • WM 926019 Removing And Installing Reservoir For Windscreen Washer System (All Except 911 Gt3 RS 4.0)
        • Technical values
        • Preliminary work
          • Preliminary work - tank for windscreen washer system
        • Removing reservoir for windscreen washer system
          • Removing tank for windscreen washer system
        • Installing reservoir for windscreen washer system
          • Installing tank for windscreen washer system
        • Subsequent work
          • Subsequent work - tank for windscreen washer system
      • WM 926619 Removing And Installing Spray Nozzle For Windscreen Washer System (All Except 911 Gt3 RS 4.0)
        • Preliminary work
          • Preliminary work for windscreen-washer spray nozzle
        • Removing spray nozzle for windscreen washer system
        • Installing spray nozzle for windscreen washer system
        • Subsequent work
          • Subsequent work for spray nozzle of windscreen washer system
      • WM 926719 Removing And Installing Sensor For Fluid Level Display (All Except 911 Gt3 RS 4.0)
        • Tools
        • Preliminary work
        • Removing sensor for fluid level display
        • Installing sensor for fluid level display
        • Subsequent work
      • WM 927219 Removing And Installing Spray Nozzle For Headlight Washer System (All Except 911 Gt3 RS 4.0)
        • Preliminary work
          • Preliminary work for spray nozzle of headlight washer system
        • Subsequent work
          • Subsequent work for spray nozzle of headlight washer system
        • Removing and installing spray nozzle head
          • Removing spray nozzle head
          • Installing spray nozzle head
      • WM 927719 Removing And Installing Hose For Headlight Washer System (All Except 911 Gt3 RS 4.0)
        • Preliminary work
          • Preliminary work for removing hose for headlight washer system (front apron)
          • Preliminary work for removing hose for headlight washer system (at tank)
        • Removing hose for headlight washer system
          • Removing hose for headlight washer system (front apron)
          • Removing hose for headlight washer system (at tank)
        • Installing hose for headlight washer system
          • Installing hose for headlight washer system (front apron)
          • Installing hose for headlight washer system (at tank)
        • Subsequent work
          • Subsequent work for installing hose for headlight washer system (front apron)
          • Subsequent work for installing hose for headlight washer system (at tank)
      • WM 927819 Removing And Installing Pump For Headlight Washer System (All Except 911 Gt3 RS 4.0)
        • Tools
        • Preliminary work
        • Removing pump for headlight washer system
        • Installing pump for headlight washer system
        • Subsequent work
  • Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.)
    • 97 - Cables -- CARRERA (997)
      • WM 9700IN Measurement Of Closed-Circuit Current (All Models)
        • Tools
        • Tools And Materials
          • Tools
        • Measurement Of Closed-Circuit Current
          • Preliminary Work On Vehicle
          • Testing
      • WM 970919 Removing And Installing Main Wire Harness (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Main Wire Harness
          • Notes
          • Exposing Main Wire Harness In Passenger Compartment
          • Removing Main Wire Harness In Passenger Compartment
        • Installing Main Wire Harness
          • Installing Main Wire Harness In Passenger Compartment
          • Completing The Vehicle
          • Installing Front Main Wire Harness
        • Subsequent Work
      • WM 971019 Removing And Installing Vehicle Electrical System Control Unit (All Models)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Vehicle Electrical System Control Unit
        • Removing Vehicle Electrical System Control Unit
        • Installing Vehicle Electrical System Control Unit
        • Subsequent Work For Vehicle Electrical System Control Unit
          • Subsequent Work - Vehicle Electrical System Control Unit
        • Coding Vehicle Electrical System Control Unit
          • Programming The Vehicle Electrical System Control Unit
            • Reading Out And Printing Out Values
          • Coding (Programming) The Control Module
      • WM 971519 Removing And Installing Front Wire Harness (Except Turbo)
        • Preliminary Work
        • Removing Front Wire Harness
        • Installing Front Wire Harness
        • Subsequent Work
      • WM 971619 Removing And Installing Wire Harness For Front-End (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Wire Harness For Front-End
        • Installing Wire Harness For Front-End
        • Subsequent Work
      • WM 972019 Removing And Installing Wiring Harness For Center Console (All Models)
        • Preliminary Work
          • Preliminary Work For Interior Monitoring Sensor
        • Removing Wiring Harness For Center Console
        • Installing Wiring Harness For Centre Console
        • Subsequent Work
          • Subsequent Work For Interior Monitoring Sensor
      • WM 972519 Removing And Installing Rear Wire Harness (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Rear Wire Harness
          • Exposing Rear Wire Harness
          • Removing Rear Wire Harness
        • Installing Rear Wire Harness
          • Notes
          • Completing The Vehicle
        • Subsequent Work
      • WM 973219 Removing And Installing Wiring Harness For Door (All Models)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Wire Harness For Door
          • Preliminary Work For Wire Harness For Door Trim Panel
        • Removing Wiring Harness For Door
          • Removing Side Footwell Trim On Driver's Side
          • Removing Side Footwell Trim On Passenger's Side
          • Disconnect Wire Harness For Door (Driver's Side) At The A-Pillar
          • Disconnect Wire Harness For Door (Passenger's Side) At The A-Pillar
          • Removing Wire Harness For Door
          • Removing Wire Harness For Door Trim Panel
        • Installing Wiring Harness For Door
          • Notes
          • Locking Wire Harness For Door (Driver's Side) At The A-Pillar
          • Locking Wire Harness For Door (Passenger's Side) At The A-Pillar
          • Installing Side Footwell Trim On Driver's Side
          • Installing Side Footwell Trim On Passenger's Side
          • Installing Wire Harness For Door Trim Panel
        • Subsequent work
          • Subsequent Work For Wire Harness For Door
          • Subsequent Work For Wire Harness For Door Trim Panel
      • WM 973755 Replacing Wire Harness For PASM (All Models)
        • Tools
        • Preliminary Work
          • Preliminary Work For Wire Harness For Front PASM
          • Preliminary Work For Wire Harness For Rear PASM
        • Removing Wire Harness For PASM
          • Removing Wire Harness For Front PASM
          • Removing Wire Harness For Rear PASM
        • Installing Wire Harness For PASM
          • Installing Wire Harness For Front PASM
          • Installing Wire Harness For Rear PASM
        • Subsequent Work
          • Subsequent Work For Wire Harness For Front PASM
          • Subsequent Work For Wire Harness For Rear PASM
      • WM 974519 Removing And Installing Wire Harness For Battery Wiring (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Ground Strap And B+ Line Of Battery
          • Preliminary Work For B+ Line From Power Distributor To Transmission Connection Point
          • Preliminary Work For Engine B+ Line From Generator To Starter
          • Preliminary Work For B+ Line From Starter To Transmission Connection Point
          • Preliminary Work For Engine Ground Strap
        • Removing Wire Harness For Battery Wiring
          • Removing Ground Strap And B+ Line Of Battery
          • Remove B+ Line From Power Distributor To Transmission Connection Point
          • Removing B+ Line From Starter To Transmission Connection Point
          • Removing Engine Ground Strap
          • Removing B+ Wire Harness For Engine In Vehicles With Manual Transmission
          • Removing B+ Wire Harness For Engine In Vehicles With Automatic Transmission
        • Installing Wire Harness For Battery Wiring
          • Installing Ground Strap And B+ Line Of Battery
          • Install B+ Line From Power Distributor To Transmission Connection Point
          • Installing B+ Line From Starter To Transmission Connection Point
          • Fitting Ground Strap To Engine
          • Installing B+ Wire Harness For Engine In Vehicles With Manual Transmission
          • Installing B+ Wire Harness For Engine In Vehicles With Automatic Transmission
        • Subsequent Work
          • Subsequent Work For Ground Strap And B+ Line Of Battery
          • Subsequent Work For B+ Line From Power Distributor To Transmission Connection Point
          • Subsequent Work For B+ Line From Starter To Transmission Connection Point
          • Subsequent Work For Engine Ground Strap
          • Subsequent Work For Engine B+ Line From Generator To Starter
      • WM 975219 Removing And Installing Wire Harness For Engine (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt2 RS)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Wire Harness For Engine
        • Removing Wire Harness For Engine
        • Installing Wire Harness For Engine
        • Subsequent Work
          • Subsequent Work For Wire Harness For Engine
      • WM 975319 Removing And Installing Wire Harness For Seat Heater (All Models)
        • Information
          • Spare Parts Information
      • WM 975519 Removing And Installing Wire Harness For Convertible Top (Speedster)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Convertible Top Wire Harness
          • Preliminary Work For Wiring Harness For Roll-Over Protection System
        • Removing Wire Harness For Convertible Top
          • Notes
          • Removing Wire Harness For Roll-Over Protection System
        • Installing Wire Harness For Convertible Top
          • Notes
          • Installing Wire Harness For Roll-Over Protection System
        • Subsequent Work
          • Subsequent Work For Convertible Top Wire Harness
          • Subsequent Work For Wiring Harness For Roll-Over Protection System
      • WM 975619 Removing And Installing Wire Harness For Backrest (Front Seat) (All Models)
        • Preliminary Work
        • Removing Wire Harness For Backrest (Front Seat)
          • Overview
          • Removing Support For Left Backrest Side Part
          • Removing Backrest Side Support
          • Taking Off Foam Part
          • Removing Wire Harness For Backrest (Front Seat)
        • Installing Wire Harness For Backrest (Front Seat)
          • Overview
          • Notes
          • Fitting Foam Part
          • Installing Backrest Side Support
          • Installing Support For Left Backrest Side Part
        • Subsequent Work
      • WM 975619 Removing And Installing Wire Harness For Seat (Folding Sports Bucket Seat) (All Models)
        • Preliminary Work
        • Removing Wire Harness For Seat (Folding Sports Bucket Seat)
        • Installing Wire Harness For Seat (Folding Sports Bucket Seat)
        • Subsequent Work
      • WM 975719 Removing And Installing Wire Harness For Seat Surface (Front Seat) (All Models)
        • Preliminary work
        • Removing Wire Harness For Seat Surface (Front Seat)
        • Installing Wire Harness For Seat Surface (Front Seat)
        • Subsequent Work
      • WM 975719 Removing And Installing Wire Harness For Electrically Adjustable Seat (All Models)
        • Preliminary Work
        • Removing Wire Harness For Electrically Adjustable Seat
        • Installing Wire Harness For Electrically Adjustable Seat
        • Subsequent Work
      • WM 975719 Removing And Installing Wire Harness For AWS (Folding Sports Bucket Seat) (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Wire Harness For AWS (Folding Sports Bucket Seat)
        • Installing Wire Harness For AWS (Folding Sports Bucket Seat)
        • Subsequent Work
      • WM 976555 Replacing Wire Harness For Anti-Lock Brake System (Abs) (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work On Front ABS Wire Harness
          • Preliminary Work On Rear ABS Wire Harness
        • Removing Wire Harness For Anti-Lock Brake System (ABS)
          • Removing Front ABS Wire Harness
          • Removing Rear ABS Wire Harness
        • Installing Wire Harness For Anti-Lock Brake System (ABS)
          • Installing Front ABS Wire Harness
          • Installing Rear ABS Wire Harness
        • Subsequent Work
          • Subsequent Work On Front ABS Wire Harness
          • Subsequent Work On Rear ABS Wire Harness
      • WM 976623 Installing Wire Harness For Airbag (All Models)
        • Tools
        • Preliminary Work
          • Preliminary Work For Wire Harness For Passenger's Airbag Unit
          • Preliminary Work For Wire Harness For Left Seat-Belt Tensioner
          • Preliminary Work For Wire Harness For Right Seat-Belt Tensioner
          • Preliminary Work For Wire Harness For Left Head Airbag (Triggering Unit To A-Pillar Connection Point)
          • Preliminary Work For Wire Harness For Right Head Airbag (Triggering Unit To A-Pillar Connection Point)
          • Preliminary Work For Head Airbag Wire Harness (Head Airbag To A-Pillar Connection Point)
        • Tools And Materials
          • Tools
        • Installing Wire Harness For Airbag
          • Installing Components For Airbag From Triggering Unit To Passenger's Airbag Unit Or Seat-Belt Pretensioner
          • Installing Wire Harness For Airbag From The Triggering Unit To The A-Pillar Connection Point
          • Installing Wire Harness For Airbag From The A-Pillar Connection Point To The Head Airbag
        • Subsequent Work
          • Subsequent Work For Wire Harness For Passenger's Airbag Unit
          • Subsequent Work For Wire Harness For Left Seat-Belt Tensioner
          • Subsequent Work For Wire Harness For Right Seat-Belt Tensioner
          • Subsequent Work For Wire Harness For Left Head Airbag (Triggering Unit To A-Pillar Connection Point)
          • Subsequent Work For Wire Harness For Right Head Airbag (Triggering Unit To A-Pillar Connection Point)
          • Subsequent Work For Head Airbag Wire Harness (Head Airbag To A-Pillar Connection Point)
      • WM 976719 Removing And Installing Wire Harness For Rear Spoiler (Gt2, Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Removing Wire Harness For Rear Spoiler
          • Disconnecting Plug Connection From Rear Lid To Main Wire Harness
          • Removing Air Guide
          • Removing Fan Motor
          • Loosening Pump Unit For Spoiler Drive
          • Removing Wire Harness For Rear Spoiler
        • Installing Wire Harness For Rear Spoiler
          • Notes
          • Securing Pump Unit For Spoiler Drive
          • Installing Fan Motor
          • Installing Air Guide
          • Connecting Plug Connection From Rear Lid To Main Wire Harness
        • Subsequent Work
      • WM 976719 Removing And Installing Wire Harness For Rear Spoiler/Rear Lid (Gt3 & Gt3 RS)
        • Preliminary Work
          • Preliminary Work For Wire Harness For Rear Spoiler
        • Removing Wire Harness For Rear Spoiler
        • Installing Wire Harness For Rear Spoiler
        • Subsequent Work
          • Subsequent Work For Wire Harness For Rear Spoiler
      • WM 977019 Removing And Installing Wiring Harness For Number Plate Light (All Models)
        • Preliminary Work
        • Removing Wiring Harness For Number Plate Light
        • Installing Wiring Harness For Number Plate Light
        • Subsequent Work
      • WM 977223 Installing Optical WAVEGUIDE (All Models)
        • Tools
        • Preliminary Work
        • Optical Waveguide Variants
        • Installing Optical Waveguide
          • Disconnecting Optical Waveguide
          • Removing Optical Contacts On Connector Side
          • Installing Optical Contacts On Connector Side
          • Removing And Installing Optical Contacts On Socket Side
          • Installing Optical Contacts On Socket Side
          • Installing Optical Waveguide
        • Subsequent Work
      • WM 9772IN Optical WAVEGUIDE (LWL) - Most Bus (All Models)
        • Tools
        • Optical Waveguide (LWL) - MOST Bus
          • Requirements When Working With LWL
          • Storage, Packing, Transport
          • Installing The LWL In The Vehicle
          • Repair
          • Push-On Connector - Dust Boots
          • Control Unit Plug Connector (Wiring Harness Side)
          • Push-On Connector - Connection Points
          • Optical Fiber (LWL) - Module
          • Optical Waveguide Variants
          • Removing Optical Contacts On Connector Side
          • Installing Optical Contacts On Connector Side
          • Removing And Installing Optical Contacts On Socket Side
          • Installing Optical Contacts On Socket Side
      • WM 978119 Removing And Installing Wire Harness For TIPTRONIC Transmission (All Models)
        • Preliminary Work
        • Removing Wire Harness For Tiptronic Transmission
        • Installing Wire Harness For Tiptronic Transmission
        • Subsequent Work
      • WM 978319 Removing And Installing Relay Carrier 1 (All Models)
        • Preliminary Work
          • Preliminary Work For Relay Carrier 1
        • Removing Relay Carrier 1
          • Removing Relay Carrier 1 From The Retaining Frame
        • Installing Relay Carrier 1
          • Installing Relay Carrier 1 In The Retaining Frame
        • Subsequent Work
          • Subsequent Work On Relay Carrier 1
      • WM 978409 Undoing And Securing FUSEBOX (All Models)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Fusebox
        • Undoing Fusebox
          • Loosening Fuse Box
        • Securing Fusebox
          • Securing Fuse Box
        • Subsequent Work
          • Subsequent Work On Fusebox
      • WM 978919 Removing And Installing Power Distributor (All Models)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Power Distributor
        • Removing Power Distributor
        • Installing Power Distributor
          • Installing The Current Distributor
        • Subsequent Work
          • Subsequent Work For Power Distributor
      • WM 978931 Replacing Pins On The Power Distributor With Screw Bolts (All Models)
        • Technical Values
        • Preliminary Work
        • Converting Pins On The Power Distributor
          • Converting Pins
        • Subsequent Work
      • WM 979009 Removing And Installing Relay Carrier (All Models)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Relay Carrier
        • Removing Relay Carrier
        • Installing Relay Carrier
        • Subsequent Work
          • Subsequent Work For Relay Carrier
      • WM 979255 Replacing Fuse Element (All Models)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Fuse Element
        • Replacing Fuse Element
        • Subsequent Work
          • Subsequent Work For Fuse Element
      • WM 9797IN Connector - General Information (All Models
        • Tools
        • Connector - General information
        • Procedure For Releasing Connectors That Are Difficult To Move
• Body & Frame
  • Door Locks
    • 57 - Door Front, Central Locking System -- CARRERA (997)
      • WM 570837 Disassembling And Assembling Key (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Disassembling Key
          • Removing Cover Of Hand-Held Transmitter
          • Removing Hand-Held Transmitter Key
        • Assembling Key
          • Installing Hand-Held Transmitter Key
          • Installing Cover Of Hand-Held Transmitter
      • WM 571119 Removing And Installing Door Handle (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Door Handle
          • Unclipping Electric Wire For Micro Switches
          • Disconnect Connection Piece
          • Removing Door Handle And Bottom Part Of Door Handle
        • Additional Assembly Instructions
          • Locking Lock Actuation
        • Installing Door Handle
          • Fitting Door Handle And Bottom Part Of Door Handle
          • Fit Connection Piece
          • Clipping In The Electric Wire For Micro Switches
        • Subsequent Work
          • Notes
          • Function Test Following Assembly Work
      • WM 571137 Disassembling And Assembling Door Handle (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Door Handle
        • Assembling Door Handle
        • Subsequent Work
      • WM 571719 Removing And Installing Door Lock (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Door Lock
          • Disconnect Connection Piece
          • Removing Door Lock
          • Unclipping And Disengaging The Bowden Cable
        • Additional Assembly Instructions
          • Locking Lock Actuation
        • Installing Door Lock
          • Fitting The Bowden Cable
          • Installing Door Lock
          • Fit Connection Piece
        • Subsequent Work
          • Notes
          • Function Test Following Assembly Work
      • WM 572619 Removing And Installing Striker Pin (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Striker Pin
        • Installing Striker Pin
      • WM 573019 Removing And Installing Door Unit Carrier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Door Unit Carrier
          • Covering Door With Adhesive Tape
          • Removing Seal For Mirror Triangle
          • Disconnecting Plug Connection For Rear-View Mirror
          • Releasing Door Unit Carrier
          • Disconnecting Electrical Plug Connection On Microswitch
          • Disconnecting The Door Lock Electrical Plug Connection
        • Installing Door Unit Carrier
          • Locking Electrical Plug Connection For Door Lock
          • Locking Electrical Plug Connection For Microswitch
          • Fastening Door Unit Carrier
          • Locking Plug Connection For Rear-View Mirror
          • Fitting Seal For Mirror Triangle
          • Removing Adhesive Tape
        • Subsequent Work
      • WM 573037 Disassembling And Assembling Door Unit Carrier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Door Unit Carrier
        • Assembling Door Unit Carrier
        • Subsequent Work
      • WM 573055 Eliminating Symptoms In Body Interior - Replacing Door Sub-Frame (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Gt3, 911 Gt3 RS)
        • General Information
          • Symptoms
          • Causes And Remedial Action
        • Tools And Materials
        • Replacing Door Sub-Frame
        • Working Times
      • WM 574519 Removing And Installing Door Handle (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Door Handle
        • Installing Door Handle
        • Subsequent Work
      • WM 574819 Removing And Installing Crash Support (Except 911 "Sport Classic", 911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Crash Support
        • Installing Crash Support
      • WM 575115 Adjusting Front Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Tools And Materials
        • Adjusting Front Door
          • Adjusting The Front Doors
          • Setting The Door
      • WM 575119 Removing And Installing Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • General Warning Notes
        • Tools And Materials
        • Preliminary Work
        • Removing Door
          • Releasing Hinge Joint
          • Releasing Door Latch Snib On Body Side
          • Removing Door
        • Installing Door
          • Notes
          • Fastening The Hinge Joint
          • Fastening Door Latch Snib On Body Side
        • Subsequent Work
          • Reworking
      • WM 575137 Disassembling And Assembling Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Door
        • Tools And Materials
        • Disassembling Door
          • Removing Lid And Rubber Sleeve
          • Removing Retaining Clips
          • Removing Rubber Pad
        • Assembling Door
          • Installing Rubber Buffer
          • Installing Retaining Clips
          • Fitting Lid And Rubber Sleeves
          • Replacing Insulation For Door
        • Subsequent Work
      • WM 575355 Replacing Door Hinge (On Body Side) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs
        • Removing Door Hinge (On Body Side)
        • Preparing Connection Areas Of The Body For Installing The Door Hinge (On Body Side)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Door Hinge (On Body Side)
        • Preparing Door Hinge (On Body Side) For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Door Hinge (On Body Side) For Installation
        • Installing Door Hinge (On Body Side)
          • Danger Of Injury While Welding
          • Installing Door Hinge (On Body Side)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 575919 Removing And Installing Door Arrester (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Door Arrester
          • Releasing Door Latch Snib On Body Side
          • Removing Door Latch Snib
        • Installing Door Arrester
          • Installing Door Latch Snib
          • Fastening Door Arrester On Body Side
        • Subsequent Work
      • WM 576319 Removing And Installing Rubber Seal For Door - Cabriolet (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Rubber Seal For Door
          • Removing Cover Of Three-Point Seat Belt
          • Removing Rubber Seal For Door
        • Installing Rubber Seal For Door
          • Notes
          • Installing Cover Of Three-Point Seat Belt
        • Subsequent Work
      • WM 576319 Removing And Installing Rubber Seal For Door (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Removing Rubber Seal For Door
        • Installing Rubber Seal For Door
        • Subsequent Work
      • WM 576519 Removing And Installing Rubber Seal For Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Rubber Seal For Door
        • Installing Rubber Seal For Door
        • Subsequent Work
      • WM 577819 Removing And Installing Central Locking Switch (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Central Locking Switch
        • Installing Central Locking Switch
      • WM 578919 Removing And Installing Control Unit For Rear Convenience Systems (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preparing Control Unit For Comfort System Rear
        • Removing Control Unit For Rear Convenience Systems
          • Removing Control Unit For Rear Convenience Systems
        • Installing Control Unit For Rear Convenience Systems
        • Subsequent Work
          • Subsequent Work On Control Unit For Rear Convenience Comfort Systems
        • Programming Control Unit For Rear Convenience Systems
          • Reading From And Writing To The Rear Convenience System Control Unit
        • Coding Control Unit For Rear Convenience Systems
          • Coding The Control Unit For Rear Convenience Systems
  • Exterior Body Panels
    • 50 - Body Front - CARRERA (997)
      • WM 5000IN Change Identification Data Plate (All Models)
        • Change Identification Data Plate
          • Installation Location Of Identification Data Plate On The Vehicle
          • Identification Data Plate Row
          • Identification Data Plate USA
          • Identification Data Plate Canada
      • WM 5000IN Corrosion Protection Measures During Repairs (All Models)
        • Measures For Maintaining Long-Term Body Protection
        • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
          • Porsche Long-Life Guarantee Conditions
      • WM 5000IN Diagram - Body Gap Dimensions (All Models)
        • Tools
        • Technical Values
        • Diagram - Body Front Gap Dimensions
          • Gap dimensions, body front
        • Diagram - Body Centre Gap Dimensions
          • Gap Dimensions, Body Centre
      • WM 5000IN Diagram - Keys To Symbols For Welding Work (All Models)
        • Diagram - Keys To Symbols For Welding Work
          • Resistance Spot Welding
          • Inert-Gas Arc Welding (MAG Procedure)
          • Gas Welding
      • WM 5000IN Diagram Of Body Bonding Points And Sealing Elements (All Models)
        • Diagram Of Body Bonding Points And Sealing Elements
      • WM 5000IN Diagram: Plug Plan (All Models)
        • Diagram: Plug Plan
          • Top Of Front Of Vehicle
          • Bottom Of Front Of Vehicle
          • Side Body Front Section
          • Bottom Of Lower Side Member And Floor
          • Top Of Lower Side Member And Floor
          • Bottom Of Rear End
          • Top Of Rear End
          • Side Of Rear End
      • WM 5000IN General Information And Notes On Quality (All Models)
        • Measures For Maintaining Long-Term Body Protection
          • Notes
          • Prerequisite For Maintaining The Long-Life Guarantee
        • Electronic Control Modules
          • Notes
          • Battery Trickle Charge
          • Protection Against Overvoltage When Performing Welding Work
          • Replacing Control Modules
      • WM 5000IN Processing Structural Body Adhesive (All Models)
        • Tools
        • Technical Values
        • Tools And Materials
          • Processing Structural Body Adhesive
        • Information On The Use Of Structural Adhesives In Vehicle Construction
          • General
          • Separating Body Components
          • Welding In Body Components
        • PROCESSING Adhesives
          • Preparing Bonding Surfaces
        • Handling Primer
          • General
          • 2-Component SIP
        • Handling Processing Devices
          • Applicator Gun
      • WM 5000AW Safety Notes (All Models)
        • Safety Instructions For Raising Vehicles
          • Danger Of Injury When Raising Vehicles
          • Damage When Raising Vehicles
        • Safety Instructions For Welding
          • Danger Of Injury When Welding
          • Safety Instructions For Flying Sparks During Grinding And Welding Work
          • Safety Instructions For Fuel Tank
          • Safety Instructions For Air Conditioning
        • Safety Instructions For Adhesive Bonding
          • Danger Of Poisoning And Injury When Adhesive Bonding
          • Safety Instructions For Teromix-6700 Two-Component Adhesive
        • Safety Instructions For Installation Work
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Safety Instructions For Airbag System
          • Safety Instructions For Door
        • Safety Instructions For Corrosion Protection
          • Safety Instructions For Plug Location Plan (Body)
          • Safety Instructions For Water Drains (Body)
          • Safety Instruction For Deformation Element
          • Possible Separation Points On Inner Side Member
          • Baked Hardening
      • WM 5000IN Seam Seals (All Models)
        • Accessories
          • Note On Seam Seals
          • Door
          • Rear Lid
        • Unpainted BODYSHELL
          • Top Of Front Of Vehicle
          • Top Of Front Of Vehicle, Front
          • Top Of Front Of Vehicle, (Radiator Tank)
          • Front Of Vehicle And Inside A-Pillars
          • Side Of Front Of Vehicle
          • Top Of Inside Front Of Vehicle And Floor
          • Top Of Lower Side Member And Floor
          • Wheel Housing And Upper Rear Side Section
          • Bottom Of Front Of Vehicle
          • Bottom Of Lower Side Member And Floor
          • Top Of Rear End
          • Bottom Of Rear End
          • Side Of Rear End
          • Roof
      • WM 5000IN Tools And Metalworking Tools For Body Repairs (All Models)
        • Tools
        • Straightening Systems
        • Metalworking Tools
          • Electrical Equipment
          • Mechanical Equipment
          • Compressed-Air Equipment
          • Welding Equipment
      • WM 5000IN UNDERSEALING (All Models)
        • Tools
          • Notes
          • Tools And Materials
            • Tools
            • Materials
        • Diagram: UNDERSEALING
          • Bottom Of Front Of Vehicle, Layout Plan
      • WM 5000IN Using 2K Acoustic Filler Foam "AFS-VARIO" On The Body (All Models)
        • Using 2K Acoustic Filler Foam "AFS-VARIO" On The Body
          • Description
          • Applications
          • Processing
      • WM 5000IN Vehicle Identification Number (All Models)
        • Tools
        • Re-Imprinting New Vehicle Identification Number
          • Vehicle Identification Number
          • Spacer For Replacing The Vehicle Identification Number
          • Re-Imprinting New Vehicle Identification Number
      • WM 5000IN Water Drainage Diagram (All Models)
        • Water Drainage Diagram
      • WM 5000IN Work Sequence For Accident Repair (All Models)
        • Work Sequence For Accident Repair
          • Procedure For Accident Repairs
          • Repair
          • Replacement
      • WM 5000IN Work Sequence For Determining Extent Of Damage To Vehicles Involved In An Accident (All Models)
        • Tools
        • Work Sequence For Determining Extent Of Damage To Vehicles Involved In An Accident
          • Instructions
          • Procedure For Damage Diagnosis
          • Identifiable Deformations On The Body Structure
          • No Identifiable Deformations On The Body Structure
      • WM 501055 Replacing Front Closing Panel (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
          • Preliminary Work For Body Repairs With Straightening Bench
          • Preliminary Work For Body Repairs
        • Removing Front Closing Panel
        • Preparing Connection Areas Of The Body For Installing The Front Closing Panel
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Front Closing Panel
        • Fitting Front Closing Panel And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Front Closing Panel And Preparing For Installation
        • Installing Front Closing Panel
          • Danger Of Injury While Welding
          • Installing Front Closing Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 501455 Replacing Front Panel (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Straightening Bench
          • Notes
          • Preliminary Work For Body Repairs
        • Removing Front Panel
          • Removing Body Front Section
        • Preparing Connection Areas Of The Body For Installation Of The Front Panel
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Front Panel
        • Fitting Front Panel And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Front Panel And Preparing For Installation
        • Installing Front Panel
          • Danger Of Injury While Welding
          • Installing Front Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 502055 Replacing Front Floor Panel (All Models)
        • Tools
        • Technical Values
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
          • Preliminary Work For Body Repairs With Straightening Bench
          • Preliminary Work For Body Repairs
        • Removing Spare-Wheel Well Insert
        • Removing Floor Front Section
        • Preparing Connection Areas Of The Body For Installing Front Floor Panel
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Floor Front Section
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Adjusting Floor Front Section And Preparing For Installation
        • Installing Front Floor Panel
          • Danger Of Injury While Welding
          • Installing Floor Front Section
        • Installing Spare-Wheel Well Insert
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 505519 Removing And Installing Wing (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Wing
          • Removing Fuel Tank Cap
          • Releasing Tank Filler Neck
          • Releasing Bottom Of Wing
          • Releasing Top Of Wing
          • Removing Retaining Strip
          • Removing Protective Film
          • Releasing Wing From A-Pillar
          • Removing Masking Panel
        • Installing Wing
          • Installing Masking Panel
          • Fastening Wing To A-Pillar
          • Fastening Top Of Wing
          • Fastening Bottom Of Wing
          • Sticking In The Protective Film
          • Installing Retaining Strip
          • Fastening Tank Filler Neck
          • Installing Fuel Tank Cap
        • Subsequent Work
      • WM 505619 Removing And Installing Front Wheel Housing Liner (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Front Wheel Housing Liner
          • Removing Front Wheel Housing Liner - Rear Section
          • Remove Front Wheel Housing Liner - Front Section
        • Installing Front Wheel Housing Liner
          • Install Front Wheel Housing Liner - Front Section
          • Installing Front Wheel Housing Liner - Rear Section
        • Subsequent Work
      • WM 507449 Eliminating Noise Symptoms - Reworking Front Wheel Housing (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • General Information
          • Symptoms
          • Causes And Remedial Action
        • Preliminary Work
        • Reworking Front Wheel Housing
        • Subsequent Work
        • Working Times
      • WM 507455 Replacing Front Wheel Housing (All Models)
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Front Wheel Housing
          • Removing Reinforcement For Front Wheel Housing
          • Removing Front Wheel Housing
        • Preparing Connection Areas Of Body For Installation Of Front Wheel Housing
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Front Wheel Housing
        • Fitting Front Wheel Housing And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Front Wheel Housing And Preparing For Installation
          • Preparing Reinforcement For Front Wheel Housing For Installation
        • Installing Front Wheel Housing
          • Danger Of Injury While Welding
          • Installing Front Wheel Housing
          • Installing Reinforcement For Front Wheel Housing
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 507455 Replacing Front Wheel Housing (Section) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Front Wheel Housing (Section)
        • Preparing Connection Areas Of The Body For Installing The Front Wheel Housing (Section)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Front Wheel Housing (Section)
        • Fitting In Front Wheel Housing And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Front Wheel Housing And Preparing For Installation
        • Installing Front Wheel Housing (Section)
          • Danger Of Injury While Welding
          • Installing Front Wheel Housing (Section)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 507755 Replacing Outer Front Side Member (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Outer Front Side Member
        • Preparing Connection Areas Of Body For Installation Of Outer Front Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Outer Front Side Member
        • Fitting Outer Front Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Outer Front Side Member And Preparing For Installation
        • Installing Outer Front Side Member
          • Danger Of Injury While Welding
          • Installing Outer Front Side Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 507955 Replacing Front Side Member (Section) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs Using Straightening Bench
          • Notes
          • Removing Front Side Member (Section)
        • Preparing Connection Areas Of The Body For Installing The Front Side Members (Section)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Front Side Members (Section)
        • Fitting In Front Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Front Side Member And Preparing For Installation
        • Installing Front Side Member (Section)
          • Danger Of Injury While Welding
          • Installing Front Side Member (Section)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 507955 Replacing Inner Front Side Member (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Inner Front Side Member
        • Preparing Connection Areas Of Body For Installation Of Inner Front Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Inner Front Side Member
        • Fitting Inner Front Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Inner Front Side Member And Preparing For Installation
        • Installing Inner Front Side Member
          • Danger Of Injury While Welding
          • Installing Inner Front Side Member
        • SUBSEQUENT Work
          • Subsequent Work For Body Repairs
      • WM 508719 Removing And Installing Cowl Panel Cover (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Cowl Panel Cover
          • Removing Lateral Cap
          • Disconnecting Plug Connection Of Spray Nozzle For Windscreen Washer System
          • Disconnecting Water Line For Windscreen Washer System
          • Disconnecting Plug Connection For GPS Antenna
          • Disconnecting Plug Connection For Radio Antenna
          • Removing Lower Cowl Panel Cover
        • Installing Cowl Panel Cover
          • Notes
          • Locking Plug Connection For Radio Antenna
          • Locking Plug Connection For GPS Antenna
          • Locking Water Line For Windscreen Washer System
          • Locking Plug Connection Of Spray Nozzle For Windscreen Washer System
          • Fastening Upper Cowl Panel Cover
          • Installing Lateral Cover Cap
        • Subsequent Work
      • WM 509555 Replacing Body Front Section (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Body Front Section
        • Preparing Connection Areas Of Body For Installing Body Front Section
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Body Front Section
        • Fitting Body Front Section And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Body Front Section And Preparing For Installation
        • Installing Body Front Section
          • Danger Of Injury While Welding
          • Installing Body Front Section
        • Subsequent Work
          • Subsequent Work For Body Repairs
    • 51 - Body Center, Roof, Frame - CARRERA (997)
      • WM 510141 Repairing Threaded Bushing For Belt Connection (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Repairing Threaded Bushing For Belt Connection
          • Removing Thread For Belt Fastening
        • Preparing Connection Areas Of The Body For Installing The Threaded Bushing
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Threaded Bushing
        • Fitting In Threaded Bushing And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Threaded Bushing And Preparing For Installation
        • Installing Thread For Belt Fastening
          • Danger Of Injury While Welding
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Installing Thread For Belt Fastening
        • Subsequent Work
          • Subsequent Work After Repair Of Threaded Bushing For Belt Fastening
      • WM 5101IN Check Dimensions For Body Diagnosis (Repairs) (TARGA 4 & TARGA 4S)
        • Tools
        • Tools And Materials
        • Check Dimensions For Body Diagnosis (Repairs)
          • Check Dimensions For The Interior Construction
          • Check Dimensions For The Exterior Construction
      • WM 510355 Replacing Roof (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Notes
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Roof
        • Preparing Connection Areas Of The Body For Installation Of The Roof
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Roof
        • Fitting Roof And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Roof And Preparing For Installation
        • Installing Roof
          • Notes
          • Affixing The Roof Sound Absorber
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 510555 Replacing Roof Pillar (Pipe) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Roof Pillar (Pipe) And Roof Frame Reinforcement
          • Removing Roof Pillar (Pipe)
          • Removing Roof Frame Reinforcement
        • Preparing Connection Areas Of The Body For Installing The Roof Pillar (Pipe) And Roof Frame Reinforcement
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Roof Pillar (Pipe)
          • Preparing Connection Areas Of Body For Installing Roof Frame Reinforcement
        • Fitting Roof Pillar (Pipe) And Roof Frame Reinforcement And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Roof Pillar (Pipe) And Preparing For Installation
          • Fitting Roof Frame Reinforcement And Preparing For Installation
        • Installing Roof Frame Reinforcement And Roof Pillar (Pipe)
          • Danger Of Injury While Welding
          • Installing Roof Frame Reinforcement
          • Installing Roof Pillar (Pipe)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 510955 Replacing Rear Cross Member (Side Impact Reinforcement) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Rear Cross Member (Side Impact Reinforcement)
          • Removing Rear Cross Member
          • Removing Reinforcement Plate For Rear Cross Member
        • Preparing Connection Areas Of The Body For Installing The Rear Cross Member (Side Impact Reinforcement)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Rear Cross Member
          • Preparing Connection Areas Of Body For Installing Reinforcement Plate For Rear Cross Member
        • Fitting Rear Cross Member (Side Impact Reinforcement) And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Rear Cross Member And Preparing For Installation
          • Fitting Reinforcement Plate For Rear Cross Member And Preparing For Installation
        • Installing Rear Cross Member (Side Impact Reinforcement)
          • Danger Of Injury While Welding
          • Installing Reinforcement Plate For Rear Cross Member
          • Installing Rear Cross Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 511155 Replacing Windscreen Frame (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Windscreen Frame
        • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing The Windscreen Frame
        • Fitting In Windscreen Frame And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Windscreen Frame And Preparing For Installation
        • Installing Windscreen Frame
          • Danger Of Injury While Welding
          • Installing Windscreen Frame
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 511155 Replacing Windscreen Frame (CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Windscreen Frame
        • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
        • Fitting In Windscreen Frame And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
        • Installing Windscreen Frame
          • Danger Of Injury While Welding
          • Installing Windscreen Frame
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 512119 Removing And Installing Rear Centre Panel (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Rear Center Panel
          • Loosening Inner Rear Center Panel
          • Loosening Outer Rear Center Panel
        • Installing Rear Center Panel
          • Notes
          • Fastening Inner Rear Center Panel
        • Subsequent Work
      • WM 512137 Disassembling And Assembling Rear Centre Panel (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Preliminary Work
        • Disassembling Rear Center Panel
          • Removing Seal For Rear Center Panel
        • Assembling Rear Center Panel
          • Installing Seal For Rear Center Panel
        • Subsequent Work
      • WM 512155 Replacing Rear Centre Panel Reinforcement (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Rear Center Panel Reinforcement
        • Preparing Connection Areas Of The Body For Installing Rear Center Panel Reinforcement
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing Rear Center Panel Reinforcement
        • Preparing Rear Center Panel Reinforcement For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Rear Center Panel Reinforcement For Installation
        • Installing Rear Center Panel Reinforcement
          • Danger Of Injury While Welding
          • Installing Rear Center Panel Reinforcement
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 513755 Replacing Outer Hinge Pillar (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Outer Hinge Pillar
        • Preparing Connection Areas Of The Body For Installing Outer Hinge Pillar
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Outer Hinge Pillar
        • Fitting Outer Hinge Pillar And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Outer Hinge Pillar For Installation
        • Installing Outer Hinge Pillar
          • Danger Of Injury While Welding
          • Installing Outer Hinge Pillar
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 514555 Replacing Outer Side Member (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, Gt2, Gt2 RS & Gt3 RS)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Outer Side Member
        • Preparing Connection Areas Of The Body For Installing The Outer Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Outer Side Member
        • Fitting Outer Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Outer Side Member And Preparing For Installation
        • Installing Outer Side Member
          • Danger Of Injury While Welding
          • Installing Outer Side Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 514855 Replacing Centre Side Member (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
          • Notes
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Center Side Member
        • Preparing Connection Areas Of Body For Installing Center Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Center Side Member
        • Fitting In Center Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Center Side Member And Preparing For Installation
        • Installing Center Side Member
          • Danger Of Injury While Welding
          • Installing Center Side Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 514855 Replacing Centre Side Member (Rear Section) (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
          • Notes
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Center Side Member (Rear Section)
        • Preparing Connection Areas Of The Body For Installing The Center Side Member (Rear Section)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Center Side Member (Rear Section)
        • Fitting In Center Side Member (Rear Section) And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Center Side Member (Rear Section) And Preparing For Installation
        • Installing Center Side Member (Rear Section)
          • Danger Of Injury While Welding
          • Installing Center Side Member (Rear Section)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 514955 Replacing Lower Side Member Reinforcement (Support Tube) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • REMOVING LOWER SIDE MEMBER REINFORCEMENt
        • Preparing Connection Areas Of The Body For Installing Lower Side Member Reinforcement
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Area Of Body For Installing Lower Side Member Reinforcement
        • Fitting Lower Side Member Reinforcement And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Retaining Bracket And Preparing For Installation
          • Fitting In Support Tube And Preparing For Installation
        • Installing Lower Side Member Reinforcement
          • Danger of injury while welding
          • Installing Lower Side Member Reinforcement
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 516255 Replacing Hinge Pillar Reinforcement (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Hinge Pillar Reinforcement
        • Preparing Connection Areas Of The Body For Installation Of Hinge Pillar Reinforcement
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Hinge Pillar Reinforcement
        • Fitting Hinge Pillar Reinforcement And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Hinge Pillar Reinforcement And Preparing For Installation
        • Installing Hinge Pillar Reinforcement
          • Danger Of Injury While Welding
          • Installing Hinge Pillar Reinforcement
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 516319 Removing And Installing Deformation Element (All Models)
        • Preliminary Work
        • Removing Deformation Element
        • Installing Deformation Element
        • Subsequent Work
          • Reworking
      • WM 516819 Removing And Installing Dashboard Support (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Dashboard Support
          • Notes
          • Replacing Bracket For Dashboard Support
        • Installing Dashboard Support
        • Subsequent Work
      • WM 518741 Repairing Threaded Bushes For Seat Cross Member (All Models)
        • Tools
        • Installing Threaded Bush
          • Installing Repair Threaded Bush For Seat Cross Member
      • WM 518755 Replacing Seat Cross Member (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Seat Cross Member
        • Preparing Connection Areas Of Body For Installing Seat Cross Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Seat Cross Member
        • Preparing Seat Cross Member For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Seat Cross Member For Installation
        • Installing Seat Cross Member
          • Danger Of Injury While Welding
          • Installing Seat Cross Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 518941 Repairing Threaded Bushes For Suspension SUBFRAME Installation (All Models)
        • Tools
        • Installing Threaded Bush
          • Installing Repair Threaded Bush
      • WM 519219 Removing And Installing Cover For Front Underbody (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Front Underbody
        • Installing Cover For Front Underbody
        • Subsequent Work
      • WM 519319 Removing And Installing Cover For Centre Underbody (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Center Underbody
          • Notes
          • Removing Cover For center Underbody
        • Installing Cover For Center Underbody
          • Notes
          • Installing Cover For Side Underbody
        • Subsequent Work
      • WM 519419 Removing And Installing Cover For Rear Underbody (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Rear Underbody
          • Removing Cover For Rear Underbody - Rear Section
          • Removing Cover For Underbody - Front Section
        • Installing Cover For Rear Underbody
          • Installing Cover For Rear Underbody - Front Section
          • Installing Cover For Rear Underbody - Rear Section
        • Subsequent Work
          • Reworking
    • 53 - Body Rear - CARRERA (997)
      • WM 530555 Replacing Rear Closing Panel (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Rear Closing Panel
        • Fitting Rear Closing Panel And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Rear Closing Panel And Preparing For Installation
        • Installing Rear Closing Panel
          • Danger Of Injury While Welding
          • Installing Rear Closing Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 531755 Replacing Side Reinforcement (Frame For Light) (All Models - Up To 2005)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Side Reinforcement (Frame For Light)
        • Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
        • Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
        • Installing Side Reinforcement (Frame For Light)
          • Danger Of Injury While Welding
          • Installing Side Reinforcement (Frame For Light)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 531755 Replacing Side Reinforcement (Frame For Light) (All Models - 2006 And Up)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Preliminary Work For Body Repairs
        • Removing Side Reinforcement (Frame For Light)
        • Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
        • Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
        • Installing Side Reinforcement (Frame For Light)
          • Danger Of Injury While Welding
          • Installing Side Reinforcement (Frame For Light)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 534855 Replacing Rear Side Member (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Rear Side Member
        • Preparing Connection Areas Of The Body For Installing The Rear Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Rear Side Member
        • Preparing Rear Side Member For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Rear Side Member For Installation
        • Installing Rear Side Member
          • Danger Of Injury While Welding
          • Installing Rear Side Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 534855 Replacing Rear Side Member (Section) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Rear Side Member (Section)
        • Preparing Connection Areas Of The Body For Installing The Rear Side Members (Section)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Rear Side Members (Section)
        • Fitting Rear Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Adjusting Rear Side Members And Preparing For Installation
        • Installing Rear Side Member (Section)
          • Danger Of Injury While Welding
          • Installing Rear Side Member (Section)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 535019 Removing And Installing Side Section Support (All Models)
        • Technical Values
        • Removing Side Section Support
        • Installing Side Section Support
      • WM 535541 Repairing Side Panel (Lock Peg) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Repairing Side Panel (Lock Peg)
          • Repairing The Side Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 535555 Replacing Side Panel (CABRIO Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Side Panel
        • Preparing Connection Areas Of The Body For Installing The Side Panel
          • Safety Instructions For Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Side Section
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Side Section And Preparing For Installation
        • Installing Side Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 535555 Replacing Side Section (Except CABRIO Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Side Section
        • Preparing Connection Areas Of The Body For Installation Of The Side Section
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Side Section
        • Fitting Side Section And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Side Section And Preparing For Installation
        • Installing Side Section
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 536155 Replacing Inner Side Section (Except CABRIO Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Straightening Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Inner Side Section
          • Removing Inner Side Section (Lower Part)
          • Removing Inner Side Section (Upper Part)
        • Preparing Connection Areas Of The Body For Installing The Inner Side Sections
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing Inner Side Sections (Lower Parts)
          • Preparing Connection Areas Of The Body For Installing Inner Side Sections (Upper Parts)
          • Safety Instructions For Flying Sparks During Grinding And Welding Work
        • Fitting Inner Side Section And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Inner Side Section (Lower Part) And Preparing For Installation
          • Fitting In Inner Side Section (Upper Part) And Preparing For Installation
        • Installing Inner Side Section
          • Danger Of Injury While Welding
          • Installing Inner Side Section (Upper Part)
          • Installing Inner Side Section (Lower Part)
          • Danger Of Injury When Welding
        • Subsequent Work
          • Subsequent Work For Body Repairs
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
      • WM 536255 Replacing Frame For Light (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Frame For Light
        • Preparing Connection Areas Of The Body For Installing The Light Frame
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Light Frame
        • Fitting In Light Frame And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Light Frame And Preparing For Installation
        • Installing Frame For Light
          • Danger Of Injury While Welding
          • Installing Frame For Light
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 536855 Replacing Rear Wheel Housing (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Rear Wheel Housing
          • Removing Outer Rear Wheel Housing
          • Removing Inner Rear Wheel Housing
        • Preparing Connection Areas Of The Body For Installing The Rear Wheel Housing
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Inner Rear Wheel Housing
          • Preparing Connection Areas Of The Body For Installing The Outer Rear Wheel Housing
        • Preparing Rear Wheel Housing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Inner Rear Wheel Housing For Installation
          • Preparing Outer Rear Wheel Housing For Installation
        • Installing Rear Wheel Housing
          • Danger Of Injury While Welding
          • Installing Inner Rear Wheel Housing
          • Installing Outer Rear Wheel Housing
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 536919 Removing And Installing Rear Wheel Housing Liner (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Rear Wheel Housing Liner
          • Removing Rear Wheel Housing Liner - Rear Section
          • Removing Rear Wheel Housing Liner - Front Section
        • Installing Rear Wheel Housing Liner
          • Notes
          • Installing Rear Wheel Housing Liner - Rear Section
        • Subsequent Work
    • 55 - Lids, Flaps -- CARRERA (997)
      • WM 551319 Removing And Installing Servo Motor For Front Lid Release (All Models)
        • Preliminary work
          • Overview
          • Preliminary work for servo motor for hood release
        • Removing servo motor for front lid release
          • Removing the servo motor for front lid release
        • Installing servo motor for front lid release
          • Overview
          • Installing the servo motor for front lid release
        • Subsequent work
          • Subsequent work for servo motor for hood release
      • WM 551019 Removing And Installing Release For Front Lid (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3)
        • Preliminary work
        • Removing release for front lid
        • Installing release for front lid
        • Subsequent work
      • WM 551719 Removing And Installing Front Lower Part Of Lid Lock (All Models)
        • Technical values
        • Preliminary work
        • Removing front lower part of lid lock
          • Removing bowden cable for emergency release
          • Pressing out bowden cable for emergency release
          • Disconnect electrical plug connection
          • Removing lower part of lid lock
          • Removing lid-release cable
        • Installing front lower part of lid lock
          • Inserting lid-release cable
          • Installing lower part of lid lock
          • Locking electrical plug connection
          • Installing bowden cable for emergency release
          • Inserting bowden cable for emergency release
        • Subsequent work
          • Reworking
      • WM 551819 Removing And Installing Front Upper Part Of Lid Lock (All Models)
        • Technical values
        • Removing front upper part of lid lock
          • Removing upper part of front lid lock
        • Installing front upper part of lid lock
          • Installing upper part of front lid lock
          • Checking lid functions
      • WM 552215 Adjusting Front Lid (All Models)
        • Tools
        • Technical values
        • Adjusting front lid
          • Adjusting lid in X and Y direction
          • Adjusting lid in Z direction
          • Adjusting front lid
      • WM 552219 Removing And Installing Front Cover (All Models)
        • Technical values
        • Removing front lid
        • Installing front lid
        • Reworking
      • WM 552237 Disassembling And Assembling Front Lid (All Models)
        • Preliminary work
        • Disassembling front lid
          • Removing rubber pad
          • Removing self-adhesive label
        • Assembling front lid
          • Installing rubber pad
          • Installing self-adhesive label
        • Subsequent work
      • WM 552519 Removing And Installing Front Lid Hinge (All Models)
        • Technical values
        • Preliminary work
        • Removing front lid hinge
        • Install front lid hinge
        • Reworking
      • WM 553119 Removing And Installing Front Pneumatic Spring (All Models)
        • Removing front pneumatic spring
          • Removing front pneumatic spring at lid end
          • Removing front pneumatic spring on body
        • Installing front pneumatic spring
          • Installing front pneumatic spring on the body
          • Installing front pneumatic spring at lid end
          • Function test on pneumatic spring
      • WM 553319 Removing And Installing Front Lid Seal(All Models)
        • Removing front lid seal
          • Notes
          • Removing front lid seal
        • Installing front lid seal
          • Mounting front lid seal
          • Installing front lid seal
      • WM 553719 Removing And Installing Filler Flap (All Models)
        • Tools
        • Removing filler flap
          • Notes
          • Removing plastic hinge
        • Installing filler flap
          • Installing plastic hinge
          • Installing filler flap
      • WM 553819 Removing And Installing Switching Element For Filler Flap (All Models)
        • Preliminary work
        • Removing switching element for filler flap
        • Installing switching element for filler flap
        • Subsequent work
      • WM 555719 Removing And Installing Release For Rear Lid (All Models)
        • Preliminary work
        • Removing release for rear lid
        • Installing release for rear lid
        • Subsequent work
      • WM 556119 Removing And Installing Servo Motor For Emergency Release (All Models)
        • Technical values
        • Preliminary work
          • Preliminary work on servo motor for emergency release
        • Removing servo motor for emergency release
        • Installing servo motor for emergency release
        • Subsequent work
      • WM 556219 Removing And Installing Front Emergency Release(All Models)
        • Technical values
        • Removing front emergency release
        • Installing front emergency release
          • Installing support for release handle
          • Installing front emergency release
        • Checking inner release of luggage compartment (Trunk Entrapment)
      • WM 558219 Removing And Installing Rear Lid Release Switch(All Models)
        • Preliminary work
        • Removing rear lid release switch
        • Installing rear lid release switch
        • Subsequent work
      • WM 558419 Removing And Installing Motor For Rear Lid Release (All Models)
        • Technical values
        • Preliminary work
        • Removing motor for rear lid release
          • Removing rear lid release motor
        • Installing motor for rear lid release
          • Installing rear-lid release motor
        • Subsequent work
      • WM 558619 Removing And Installing Lower Part Of Lid Lock At Rear (All Models)
        • Technical values
        • Preliminary work
        • Removing lower part of lid lock at rear
          • Disconnecting electrical plug connection
          • Removing lower part of lid lock at rear
          • Disconnecting the emergency release cable
        • Installing lower part of lid lock at rear
          • Installing the emergency release cable
          • Installing lower part of lid lock at rear
          • Locking electrical plug connection
        • Subsequent work
      • WM 558719 Removing And Installing Rear Upper Part Of Lid Lock(All Models)
        • Technical values
        • Removing rear upper part of lid lock
        • Installing rear upper part of lid lock
        • Checking lid functions
      • WM 559015 Adjusting Rear Lid (All Models)
        • Tools
        • Technical values
        • Adjusting rear lid
          • Adjusting rear lid in X and Z direction
          • Adjusting rear lid in Y direction
          • Adjusting rear lid
        • Subsequent work
      • WM 559019 Removing And Installing Rear Lid (All Models)
        • Technical values
        • Removing rear lid
          • Disconnecting wiring harness on rear lid
          • Removing rear lid
        • Installing rear lid
          • Notes
          • Locking wiring harness on rear lid
      • WM 559037 Disassembling And Assembling Rear Lid (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Preliminary work
        • Disassembling rear lid
          • Removing adjusting element
        • Removing rubber cover
        • Assembling rear lid
          • Fitting rubber cover
          • Installing adjusting element
        • Subsequent work
      • WM 559037 Disassembling And Assembling Rear Lid (I-No. XAF) (Turbo Coupe, Turbo CABRIO)
        • Tools
        • Preliminary work
        • Disassembling rear lid
          • Removing sealing rubber
          • Removing adjusting element
          • Removing air guide
          • Removing fan motor
          • Removing wire harness for rear lid
          • Removing spoiler lip
        • Assembling rear lid
          • Installing spoiler lip
          • Installing wire harness for rear lid
          • Installing fan motor
          • Installing air guide
          • Installing adjusting element
          • Installing sealing rubber
        • Subsequent work
      • WM 559119 Removing And Installing Rear Lid Hinge(All Models)
        • Technical values
        • Preliminary work
        • Removing rear lid hinge
        • Installing rear lid hinge
        • Subsequent work
      • WM 559319 Removing And Installing Rear Pneumatic Spring (All Models)
        • Removing rear pneumatic spring
          • Removing rear pneumatic spring at lid end
          • Removing rear pneumatic spring at the body
        • Installing rear pneumatic spring
          • Installing rear pneumatic spring on the body
          • Installing rear pneumatic spring at lid end
          • Function test on pneumatic spring
    • 5X - Body General - CARRERA (997 )
      • WM 5X00IN General Information And Notes On Quality (All Models)
        • Measures For Maintaining Long-Term Body Protection
          • Notes
          • Prerequisite For Maintaining The Long-Life Guarantee
        • Electronic Control Modules
          • Notes
          • Battery Trickle Charge
          • Protection Against Overvoltage When Performing Welding Work
          • Replacing Control Modules
      • WM 5X00IN Procedure For Damage Diagnosis (All Models)
        • Tools
        • Instructions
        • Procedure For Damage Diagnosis
        • Identifiable Deformations On The Body Structure
        • No Identifiable Deformations On The Body Structure
      • WM 5000IN Work Sequence Fore Determining Extent Of Damage To Vehicles Involved In An Accident (All Models)
        • Tools
        • Instructions
      • WM 5X00IN Work Sequence For Accident Repairs (All Models)
        • Work Sequence For Accident Repairs
        • Repair
        • Replacement
      • WM 5X00IN (All Models)
        • Safety Instructions For Raising Vehicles
          • Danger Of Injury When Raising Vehicles
          • Damage When Raising Vehicles
        • Safety Instructions For Welding
          • Danger Of Injury When Welding
          • Safety Instructions For Flying Sparks During Grinding And Welding Work
          • Safety Instructions For Fuel Tank
          • Safety Instructions For Air Conditioning
        • Safety Instructions For Adhesive Bonding
          • Danger Of Poisoning And Injury When Adhesive Bonding
          • Safety Instructions For Teromix-6700 Two-Component Adhesive
        • Safety Instructions For Installation Work
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Safety Instructions For Airbag System
          • Safety Instructions For Door
        • Safety Instructions For Corrosion Protection
          • Safety Instructions For Plug Location Plan (Body)
          • Safety Instructions For Water Drains (Body)
          • Safety Instruction For Deformation Element
          • Possible Separation Points On Inner Side Member
          • Baked Hardening
      • WM 5X00IN Tools And Metalworking Tools For Body Repairs (All Models)
        • Tools
        • Straightening Systems
        • Metalworking Tools
      • WM 5X00IN Diagram - Key To Symbols For Welding Work (All Models)
        • Diagram - Keys To Symbols For Welding Work
          • Resistance Spot Welding
          • Inert-Gas Arc Welding (MAG Procedure)
          • Gas Welding
      • WM 5X00IN Corrosion Protection Measures During Repairs (All Models)
        • Measures For Maintaining Long-Term Body Protection
        • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
      • WM 5X00IN Body Parts Of Various Sheet-Steel Strengths (All Models)
        • High-Strength Steel Plates
        • Highest-Strength Steel Plates
        • Tailored Blanks
        • Baked Hardening
        • Straightening Body Parts
        • Welding Work
        • Reshaping
        • Separation Points
      • WM 5X00IN Vehicle Identification Number (All Models)
        • Tools
        • Re-Imprinting New Vehicle Identification Number
          • Vehicle Identification Number
          • Spacer For Replacing The Vehicle Identification Number
          • Re-Imprinting New Vehicle Identification Number
      • WM 5X00IN Changing Identification Plate (All Models)
        • Changing Identification Plate
          • Installation Location Of Identification Data Plate On The Vehicle
          • Identification Data Plate RoW
          • Identification Data Plate USA
          • Identification Data Plate Canada
      • WM 5X00IN Diagram: Plug Plan (All Models)
        • Diagram: Plug Plan
          • Top Of Front Of Vehicle
          • Bottom Of Front Of Vehicle
          • Side Body Front Section
          • Bottom Of Lower Side Member And Floor
          • Top Of Lower Side Member And Floor
          • Bottom Of Rear End
          • Top Of Rear End
          • Side Of Rear End
      • WM 5X00IN Underbody Protection (All Models)
        • Tools
        • Tools And Materials
          • Tools
          • Materials
        • Diagram Underbody Protection
          • Overview, Undersealing
          • Bottom Of Front Of Vehicle, Layout Plan
          • Lower Side Member And Floor, Layout Plan
          • Bottom Of Rear End, Layout Plan
      • WM 5X00IN Seam Seals (All Models)
        • Accessories
          • Note On Seam Seals
          • Door
          • Rear Lid
        • Unpainted BODYSHELL
          • Top Of Front Of Vehicle
          • Top Of Front Of Vehicle, Front
          • Top Of Front Of Vehicle, (Radiator Tank)
          • Front Of Vehicle And Inside A-Pillars
          • Side Of Front Of Vehicle
          • Top Of Inside Front Of Vehicle And Floor
          • Top Of Lower Side Member And Floor
          • Wheel Housing And Upper Rear Side Section
          • Bottom Of Front Of Vehicle
          • Bottom Of Lower Side Member And Floor
          • Top Of Rear End
          • Bottom Of Rear End
          • Side Of Rear End
          • Roof
      • WM 5X00IN Diagram - Body Gap Dimensions (All Models)
        • Tools
        • Technical Values
        • Diagram - Body Front Gap Dimensions
          • Gap Dimensions, Body Front
        • Diagram - Body Center Gap Dimensions
          • Gap Dimensions, Body Center
      • WM 5X00IN Diagram Of Body Bonding Points And Sealing Elements (All Models)
        • Diagram Of Body Bonding Points And Sealing Elements
      • WM 5X00IN Working With Body Structural Adhesive (All Models)
        • Tools
        • Technical Values
        • Tools And Materials
          • Processing Structural Body Adhesive
        • Information On Structural Bonding In Vehicle Manufacturing
          • General
          • Combined Joining Processes
          • Separating Body Components
          • Welding In Body Components
        • Working With Adhesives
          • General Information
          • Preparing Bonding Surfaces
          • Processing Conditions
          • Joining Process
            • Applying Adhesive
            • Joining Components
            • Removing Excess Material
          • Hardening
          • Assembly Strength
          • Corrosion Protection
          • Disposal
          • Endurance Strength
        • Handling Primer
          • General
          • 2-Component SIP
        • Handling Processing Devices
          • Applicator Gun
    • 63 - Bumpers -- CARRERA (997)
      • WM 631019 Removing And Installing Front Bumper (All Models)
        • Technical values
        • Preliminary work
        • Removing front bumper
          • Removing the front bumper
          • Removing insert
          • Removing clamping pieces
        • Installing front bumper
          • Installing clamping pieces
          • Installing insert
          • Installing front bumper
        • Subsequent work
      • WM 631019 Removing And Installing Front Bumper(Turbo Coupe, Turbo CABRIO)
        • Technical values
        • Preliminary work
        • Removing front bumper
          • Removing the front bumper
          • Removing insert
          • Removing clamping pieces
        • Installing front bumper
          • Installing clamping pieces
          • Installing insert
          • Installing front bumper
        • Subsequent work
      • WM 631519 Removing And Installing Front Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical values
        • Preliminary work
        • Removing front apron
          • Undoing front apron underneath
          • Loosening front apron at the sides
          • Disconnecting front apron plug connection
          • Disconnecting hose for headlight cleaning system
          • Disconnecting plug connection for direction indicator light
          • Loosening front apron at the top
        • Installing front apron
          • Securing front apron at the top
          • Securing front apron at the sides
          • Locking plug connection for direction indicator light
          • Locking hose for headlight cleaning system
          • Locking front apron plug connection
          • Securing front apron underneath
        • Subsequent work
      • WM 631537 Disassembling And Assembling Front Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Preliminary work
        • Disassembling front apron
          • Removing lower part of centre cover
          • Removing cap
          • Removing fixing clip for wire harness
          • Removing expander nut for number plate holder
          • Pulling off joining latch
        • Assembling front apron
          • Affixing joining latch
          • Installing expander nut for number plate holder
          • Installing fixing clip for wire harness
          • Installing cap
          • Installing lower part of centre cover
        • Subsequent work
      • WM 631719 Removing And Installing Front Retaining Strip (All Models)
        • Technical values
        • Preliminary work
        • Removing front retaining strip
        • Installing front retaining strip
          • Notes
          • Adjusting front retaining strip
        • Subsequent work
      • WM 631719 Removing And Installing Front Retaining Strip(Gt3, Gt3 RS)
        • Technical values
        • Preliminary work
        • Removing front retaining strip
        • Installing front retaining strip
          • Notes
          • Adjusting front retaining strip
        • Subsequent work
      • WM 633319 Removing And Installing Front Bracket (Impact Pipe) (All Models)
        • Technical values
        • Preliminary work
        • Removing front bracket (impact pipe)
          • Removing front impact pipe
        • Installing front bracket (impact pipe)
          • Install front impact pipe
        • Subsequent work
      • WM 635019 Removing And Installing Rear Bumper (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Technical values
        • Preliminary work
        • General warning notes
          • Safety instructions for the heat shield
        • Removing rear bumper
          • Notes
          • Removing heat shield at the sides
          • Checking anti-chafing film
        • Installing rear bumper
          • Installing heat shield at the sides
          • Installing rear bumper
        • Additional assembly instructions for installing bumper
          • Adjustment dimensions of the bumper
          • Correct assembly of heat protection panels
        • Subsequent work
      • WM 635519 Removing And Installing Rear Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS)
        • Technical values
        • Preliminary work
        • General warning notes
        • Removing rear apron
        • Installing rear apron
          • Removing and installing holder for rear apron
          • Installing rear apron
        • Dimensions of tailpipes
          • Gap dimensions of tailpipe
        • Subsequent work
      • WM 635537 Disassembling And Assembling Rear Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Preliminary work
        • Disassembling rear apron
          • Removing lower retaining strip
          • Removing cap
          • Removing air outlet grille
          • Removing ornamental exhaust pipe
          • Removing lower part of rear apron
        • Assembling rear apron
          • Installing lower part of rear apron
          • Installing ornamental exhaust pipe
          • Installing air outlet grille
          • Installing cap
          • Installing lower retaining strip
        • Subsequent work
      • WM 635719 Removing And Installing Rear Retaining Strip (All Models)
        • Technical values
        • Preliminary work
        • Removing rear retaining strip
        • Additional assembly instructions for installing rear retaining strip
          • Adjustment dimensions of rear retaining strip
        • Subsequent work
      • WM 636519 Removing And Installing Rear Bumper OVERRIDER(Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Preliminary work
        • Removing rear bumper overrider
          • Removing rear bumper horn
        • Installing rear bumper overrider
          • Installing the rear bumper horn
        • Subsequent work
      • WM 637319 Removing And Installing Rear Bracket (Impact Pipe, Impact Absorber) (All Models)
        • Technical values
        • Preliminary work
        • Removing rear bracket (impact pipe, impact absorber)
          • Removing rear impact pipe
          • Removing impact absorber
        • Installing rear bracket (impact pipe, impact absorber)
          • Install rear impact pipe
          • Installing impact absorber
        • Subsequent work
    • 6X - Body-Equipment Outside - General -- CARRERA (997)
      • WM 6X00IN Handling And Replacing Airbag And Seat-Belt PRETENSIONER Units (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Tools
        • Tools And Materials
          • Materials
        • General Warning Notes
          • General Warnings For Handling Airbag And Seat-Belt Pretensioner Units
          • Warnings About Assembly And Straightening Work
        • Information For Handling Airbag And Seat-Belt Pretensioner Units
          • Dangers For Persons And The Environment
          • Protective Measures And Rules Of Behavior
          • Behavior In Cases Of Malfunction Or Danger
          • General Information
          • Component Exchange After Airbag/Seat-Belt Pretensioner Triggering
      • WM 6X00IN Disposal Of Airbag And Seat-Belt PRETENSIONER Units (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Tools
        • General Warning Notes For Airbag And Seat-Belt Pretensioner Units
          • Disposal Of Airbag And Belt Tensioner Units
          • Safety Procedures When Igniting Airbag Units
        • Tools And Materials
          • Tools For Airbag Units And Belt Tensioners
        • Connecting Ignition Tool
          • Driver's Side
          • Passenger's Side
          • Side Airbag
          • Head Airbag
          • Belt Tensioner
          • Triggering Of Airbag Units
      • WM 6X00IN Safety Instructions (Applies To All Models Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO And Gt3 RS 4.0)
        • Safety Instructions For Work On Car Windows
          • Danger Of Injury When Working On Vehicle Windows
          • Material Damage When Removing The Glass From Car Windows
          • Material Damage When Inserting The Glass Into Car Windows
        • Safety Instructions For Installation Work
          • Safety Instructions For Airbag System
          • Safety Instructions For Sliding Roof
          • Safety Instructions For The Heat Shield
      • WM 6X00IN General Information On Installing And Removing Car Windows (Applies To All Models Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO And Gt3 RS 4.0)
        • Tools
        • Removing Glass With Cutting Wire Separator
          • Danger Of Injury When Working On Vehicle Windows
          • Material Damage When Removing The Glass From Car Windows
          • Removing Glass With Cutting Device - Wire Separator
          • Applying Protective Film To The Dashboard
          • Guiding Cutting Thread Into The Passenger Compartment
          • Guiding Cutting Thread Into The Gap In The Glass
          • Attaching Cutting Thread To The Body
          • Attaching Cutting Thread To The Spooling Device
          • Installing Spooling Device And Deflection Rollers On The Glass
          • Separating Glass As Far As P1
          • Repositioning Spooling Device
          • Separating Glass As Far As P2
          • Separating Glass As Far As P3
          • Separating Glass As Far As P4
          • Separating Glass As Far As P5
          • Cutting Power When Removing Glass With Cutting Thread
  • Exterior/Interior Trim
    • 66 - Exterior Equipment -- CARRERA (997)
      • WM 660319 Removing And Installing Front Spoiler (911 Turbo Coupe, 911 Turbo CABRIO)
        • Preliminary Work
        • Removing Front Spoiler
        • Installing Front Spoiler
        • Subsequent Work
      • WM 660419 Removing And Installing Front Air Grille (911 Turbo Coupe, 911 Turbo CABRIO)
        • Preliminary Work
        • Removing Front Air Grille
          • Removing Air Grille At The Sides
          • Removing Centre Air Grille
        • Installing Front Air Grille
          • Installing Air Grille At The Sides
          • Installing Centre Air Grille
        • Subsequent Work
      • WM 663119 Removing And Installing Sill Cover (Except 911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt2, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Sill Cover
          • Notes
          • Disassembling And Assembling Door Entry Guard
        • Installing Sill Cover
        • Gap Dimensions Of Sill Cover
        • Subsequent Work
      • WM 663419 Removing And Installing Side-Section Trim (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 Gt3)
        • Technical Values
        • Preliminary Work
        • Removing Side-Section Trim
        • Installing Side-Section Trim
        • Subsequent Work
      • WM 665619 Removing And Installing Air Inlet Grille (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
        • Removing Inlet Grille
          • Removing Air Inlet Grille
        • Installing Inlet Grille
          • Installing Air Inlet Grille
      • WM 665819 Removing And Installing Rear Spoiler (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
        • Tools
        • Technical Values
        • Removing Rear Spoiler
          • Removing Rear Spoiler (With Spoiler Drive Intact)
          • Removing Rear Spoiler (With Defective Spoiler Drive)
        • Installing Rear Spoiler
          • Overview
          • Notes
          • Installing Rear Spoiler
        • Subsequent Work
          • Checking Rear Spoiler
      • WM 660719 Removing And Installing Front Logo (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2, 911 Gt3 RS 4.0)
        • Removing Front Logo
        • Installing Front Logo
      • WM 663119 Removing And Installing Sill Cover (Except 911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Sill Cover
          • Notes
          • Disassembling And Assembling Door Entry Guard
        • Installing Sill Cover
        • Gap Dimensions Of Sill Cover
        • Subsequent Work
      • WM 663119 Removing And Installing Door Entry Guard (911 Gt2, 911 Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Door Entry Guard
        • Disassembling And Assembling Door Entry Guard
        • Installing Door Entry Guard
        • Gap Dimensions Of Door Entry Guard
          • Gap Dimensions Of Sill Cover
        • Subsequent Work
      • WM 663619 Removing And Installing Roof Joint Strip (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe)
        • Tools
        • Removing Roof Joint Strip
          • Removing Roof Joint Cover Strip
        • Disassembling Roof Joint Cover Strip
        • Assembling Roof Joint Cover Strip
        • Installing Roof Joint Strip
          • Installing Roof Joint Cover Strip
      • WM 663619 Removing And Installing Roof Joint Cover Strop (C-Pillar Cover) (911 TARGA 4, 911 TARGA 4S)
        • Removing Roof Joint Cover Strip (C-Pillar Cover)
        • Installing Roof Joint Cover Strip (C-Pillar Cover
      • WM 663619 Removing And Installing Roof Joint Cover Strip (911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Tools
        • Removing Roof Joint Cover Strip
        • Disassembling Roof Joint Cover Strip
        • Assembling Roof Joint Cover Strip
        • Installing Roof Joint Cover Strip
      • WM 664519 Removing And Installing Rear Wheel Cover (911 Gt3, 911 Gt3 RS)
        • Tools
        • Tools And Materials
        • Removing Rear Wheel Cover
        • Installing Rear Wheel Cover
      • WM 664655 Replacing "911 Sport Classic" Decorative Film (911 "Sport Classic"
        • Tools
        • Technical Values
        • Tools And Materials
        • Removing "911 Sport Classic" Decorative Film
        • Preparing Vehicle
          • Preparing Vehicle For Sticking On Decorative Film
        • Installing "911 Sport Classic" Decorative Film
          • Notes
          • Installing Decorative Film Using Wet Adhesion Procedure
      • WM 664655 Replacing Design Edition Logo (Wing) (911 "Sport Classic", 911 Speedster)
        • Installing Design Edition Logo (Wing)
          • Sticking On "25 Years Porsche Exclusive" Logo
      • WM 664655 Replacing Gt2 RS Logo (911 Gt2 RS)
        • Replacing GT2 RS Logo
          • Removing GT2 RS Logo
          • Sticking on GT2 RS Logo
      • WM 664655 Replacing Gt3 RS Logo (Film) (911 Gt3 RS)
        • Tools
        • Technical Values
        • Tools And Materials
        • Removing GT3 RS Logo (Film)
        • Preparing Vehicle
          • Preparing Vehicle For Sticking On Decorative Film
        • Installing GT3 RS Logo (Film)
          • Installing GT3 RS Logo (Film) Using Wet Adhesion Procedure
      • WM 665055 Replacing Rear Logo (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Replacing Rear Logo
          • Removing The Rear Logo
        • Replacing Model Logo
          • Replacing The Turbo Model Logo
      • WM 665419 Removing And Installing Switch For Rearview Mirror (Except 911 "Sport Classic", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Switch For Rearview Mirror
        • Installing Switch For Rearview Mirror
      • WM 665819 Removing And Installing Rear Spoiler (I-No. XAF) (911 Turbo Coupe, 911 Turbo CABRIO)
        • Technical Values
        • Removing Rear Spoiler
        • Installing Rear Spoiler
      • WM 665837 Disassembling And Assembling Rear Spoiler (911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Subsequent Work
      • WM 666919 Removing And Installing Trim Frame For Rear Window (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Removing Trim Frame For Rear Window
          • Removing Trim Frame For Side Of Rear Window
        • Removing Trim Frame For Rear Of Rear Window
        • Installing Trim Frame For Rear Window
          • Installing Trim Frame For Rear Of Rear Window
          • Installing Trim Frame For Side Of Rear Window
      • WM 667119 Removing And Installing Engine For Rear Spoiler (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Engine For Rear Spoiler
        • Installing Engine For Rear Spoiler
        • Subsequent Work
      • WM 667219 Removing And Installing Spoiler Drive (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Spoiler Drive
          • Removing Air Guide
          • Removing Fan Motor
          • Removing Spoiler Drive
        • Installing Spoiler Drive
          • Notes
          • Installing Fan Motor
          • Installing Air Guide
        • Subsequent Work
      • WM 667219 Removing And Installing Spoiler Drive (Except 911 "Sport Classic", 911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Spoiler Drive
          • Removing Upper Part Of Spoiler
          • Removing Lower Part Of Spoiler
          • Removing Spoiler Drive
        • Installing Spoiler Drive
          • Notes
          • Installing Lower Part Of Spoiler
          • Installing Upper Part Of Spoiler
      • WM 667237 Disassembling And Assembling Spoiler Drive (Pump Unit) (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Disassembling Spoiler Drive (Pump Unit)
          • Removing Wire Harness
          • Removing Hydraulic Cylinder
          • Removing Pump Unit
        • Assembling Spoiler Drive (Pump Unit)
          • Filling The Pump Unit
          • Installing Pump Unit
          • Filling The Hydraulic Cylinder
          • Installing Hydraulic Cylinder
          • Bleeding The Pump Unit
          • Installing Wire Harness
        • Subsequent Work
      • WM 667755 Replacing Stone Guard Film (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
        • Technical Values
        • Replacing Stone Guard Film
          • General Affixing Regulations For The Stone Guard Film
        • Affixing Stone Guard Film
      • WM 667819 Removing And Installing Mirror Glass (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Mirror Glass
        • Installing Mirror Glass
      • WM 667919 Removing And Installing Housing For Rear-View Mirror (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Housing For Rear-View Mirror
        • Installing Housing For Rear-View Mirror
        • Subsequent Work
      • WM 668219 Removing And Reinstalling Mirror Adjuster Motor (Except 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Mirror Adjuster Motor
        • Installing Mirror Adjuster Motor
        • Subsequent Work
      • WM 668319 Removing And Installing Number Plate Cover (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Front Number Plate Cover
          • Removing Front Number Plate Cover (ECE)
          • Removing Front Number Plate Cover (ROW)
          • Removing Front Number Plate Cover (USA)
        • Removing Rear Number Plate Cover
          • Removing Rear Number Plate Cover (USA)
        • Installing Rear Number Plate Cover
          • Installing Rear Number Plate Cover (USA)
        • Installing Front Number Plate Cover
          • Installing Front Number Plate Cover (USA)
          • Installing Front Number Plate Cover (ROW)
          • Installing Front Number Plate Cover (ECE)
      • WM 668919 Removing And Installing Rear-View Mirror (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rear-View Mirror
          • Disconnecting Plug Connection For Rear-View Mirror
          • Removing Rear-View Mirror
        • Installing Rear-View Mirror
          • Notes
          • Locking Plug Connection For Rear-View Mirror
        • Subsequent Work
      • WM 669219 Removing And Installing The Roof Transport System (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe)
        • Technical Values
        • General Warning Notes
          • Warning Notes
        • Removing The Roof Transport System
        • Removing Base Plate Of Roof Transport System
        • Installing Base Plate Of Roof Transport System
        • Installing The Roof Transport System
    • 68 - Interior Equipment -- CARRERA (997)
      • WM 680519 Removing And Installing Inner Door Sill Trim (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Inner Door Sill Trim
          • Removing Inner Door Sill Trim (Driver's Side)
          • Removing Inner Door Sill Trim (Passenger's Side)
        • Installing Inner Door Sill Trim
          • Installing Inner Door Sill Trim (Driver's Side)
          • Installing Inner Door Sill Trim (Passenger's Side)
      • WM 680719 Removing And Installing Cover Strip (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Cover Strip
        • Installing Cover Strip
        • Subsequent Work
      • WM 680719 Removing And Installing Cover Strip ("RS 3.8") (Gt2 RS, Gt3 RS)
        • Tools
        • Tools And Materials
        • Preliminary Work
        • Removing Cover Strip ("RS 3.8")
        • Installing Cover Strip ("RS 3.8")
          • Notes
          • Processing Instructions For Affixing Adhesive Tape
        • Subsequent Work
      • WM 681119 Removing And Installing Glove Compartment Lock (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Glove Compartment Lock
          • Removing Support For Glove Compartment Lid
          • Removing Glove Compartment Lock
        • Installing Glove Compartment Lock
          • Notes
          • Installing Support For Glove Compartment Lid
      • WM 681219 Removing And Installing Lid For Glove Compartment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Lid For Glove Compartment
        • Installing Lid For Glove Compartment
        • Subsequent Work
      • WM 681419 Removing And Installing Centre Console Cover (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Centre Console Cover
          • Removing Footwell Outlet Vent Cover
          • Removing Centre Console Cover
        • Installing Centre Console Cover
          • Notes
          • Installing Footwell Outlet Vent Cover
        • Subsequent Work
      • WM 681519 Removing And Installing Glove Compartment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Glove Compartment
        • Installing Glove Compartment
        • Subsequent Work
      • WM 681619 Removing And Installing Oddments Tray (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Oddments Tray
          • Removing Shelf
        • Installing Oddments Tray
          • Installing Shelf
        • Subsequent Work
      • WM 681719 Removing And Installing Centre Console (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Centre Console
          • Removing Centre Console (Without Multimedia Interface)
          • Removing Centre Console (With Multimedia Interface)
        • Installing Centre Console
          • Installing Centre Console (Without Multimedia Interface)
          • Installing Centre Console (With Multimedia Interface)
        • Subsequent Work
      • WM 681737 Disassembling And Assembling The Centre Console (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling The Centre Console
          • Disassembling Centre Console
        • Assembling The Centre Console
          • Assembling Centre Console
        • Subsequent Work
      • WM 681919 Removing And Installing Cover For Centre Console (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Centre Console
          • Removing Cover For Support Frame
          • Removing Cover On PDK
          • Removing Frame
        • Installing Cover For Centre Console
          • Installing Frame
          • Installing Cover For Support Frame
          • Installing Cover On PDK
        • Subsequent Work
      • WM 682019 Removing And Installing Front Ashtray (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Front Ashtray
        • Installing Front Ashtray
      • WM 682319 Removing And Installing Sun Visor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, TARGA 4, TARGA 4S, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0)
        • Technical Values
        • Removing Sun Visor
        • Installing Sun Visor
      • WM 682337 Disassembling And Assembling Sun Visor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Sun Visor
          • Removing Mirror Insert
          • Removing Bulb And Contact Clips
          • Removing Mirror Housing
        • Assembling Sun Visor
          • Installing Mirror Housing
          • Inserting Contact Clips And Bulb
          • Installing Mirror Insert
        • Subsequent Work
          • Reworking
      • WM 682719 Removing And Installing Interior Rear-View Mirror (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Interior Rear-View Mirror
        • Installing Interior Rear-View Mirror
      • WM 683019 Removing And Installing Cup Holder (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Cup Holder
        • Installing Cup Holder
      • WM 683037 Disassembling And Assembling Cup Holder (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Disassembling Cup Holder
          • Removing Flap
        • Assembling Cup Holder
          • Installing Flap
        • Subsequent Work
      • WM 683119 Removing And Installing Cassette/Cd Box (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing CD Box
          • Removing CD Holder
        • Installing CD Box
          • Installing CD Holder
        • Subsequent Work
      • WM 684419 Removing And Installing Tunnel Support (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Tunnel Support
        • Installing Tunnel Support
        • Subsequent Work
      • WM 684819 Removing And Installing Lid For Tray (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Lid For Tray
          • Removing Extension For Centre Console
          • Removing Lid For Tray
        • Installing Lid For Tray
          • Notes
          • Installing Extension For Centre Console
        • Subsequent Work
      • WM 689319 Removing And Installing Fire Extinguisher (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Removing Fire Extinguisher
          • Notes
          • Removing Bracket For Fire Extinguisher
        • Installing Fire Extinguisher
          • Installing Bracket For Fire Extinguisher
          • Installing Fire Extinguisher
      • WM 689319 Removing And Installing Fire Extinguisher (Front Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Fire Extinguisher
          • Notes
          • Removing Tray For Fire Extinguisher
        • Installing Fire Extinguisher
          • Installing Tray For Fire Extinguisher
          • Installing Fire Extinguisher
    • 70 - Linings, Insulation -- CARRERA (997)
      • WM 7000IN Notes For The Care Of Soft-Look Paint Surfaces (All Models)
        • Notes
        • Light Soiling (E.G. Dust)
        • Information
      • WM 700219 Removing And Installing Wing Flange Cover (All Models)
        • Removing Wing Flange Cover
          • Removing Cover For Wing Flange
        • Installing Wing Flange Cover
          • Installing Cover For Wing Flange
          • Additional Assembly Instructions For Replacing Velcro Fasteners
      • WM 700519 Removing And Installing Front Luggage Compartment Trim Panel (All Models)
        • Removing Front Luggage Compartment Trim Panel
          • Removing Front Luggage Compartment Trim Panel (Luggage Compartment Pan)
          • Removing Front Luggage Compartment Trim Panel (Bulkhead)
          • Removing Foam Parts For Front Luggage Compartment
        • Installing Front Luggage Compartment Trim Panel
          • Installing Foam Parts For Front Luggage Compartment
          • Installing Front Luggage Compartment Trim Panel (Bulkhead)
          • Installing Front Luggage Compartment Trim Panel (Luggage Compartment Pan)
      • WM 701619 Removing And Installing Instrument Panel Cover (All Models)
        • Removing Instrument Panel Cover
        • Installing The Instrument Panel Cover
      • WM 701755 Replacing Sound Absorber For Engine Compartment (All Models)
        • Preliminary Work
        • Installing Sound Absorber For Engine Compartment
      • WM 700819 Removing And Installing Trim Panel For Hood Compartment (CABRIO Models)
        • Preliminary Work
        • Removing Trim Panel For Hood Compartment
          • Removing Hood Compartment Trim
        • Installing Trim Panel For Hood Compartment
          • Installing Hood Compartment Trim
      • WM 701819 Removing And Installing Instrument Panel (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Instrument Panel
          • Removing The Device Carrier
          • Undoing Intermediate Piece For Defroster Cover
          • Removing Instrument Panel
        • Installing Instrument Panel
          • Checking Instrument Panel Clips
          • Installing Instrument Panel
          • Securing Intermediate Piece For Defroster Cover
          • Installing The Device Carrier
        • Subsequent Work
      • WM 701919 Removing And Installing Trim Under Dashboard (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Trim Under The Dashboard On The Driver's Side
          • Notes
          • Disconnecting The Electrical Plug Connections
        • Installing Trim Under Instrument Panel On Driver's Side
          • Locking Electrical Plug Connections
          • Installing Trim Under Dashboard On The Driver's Side
        • Removing And Installing The Cover Under The Instrument Panel On The Passenger's Side
          • Removing The Cover Under The Instrument Panel On The Passenger's Side
          • Installing The Cover Under The Instrument Panel On The Passenger's Side
        • Reworking
      • WM 702019 Removing And Installing Cover For Instrument Panel (Defroster Cover) (All Models)
        • Preliminary Work
        • Removing Cover For Instrument Panel (Defroster Cover)
          • Removing Cover For Centre Instrument Panel (Defroster Cover)
          • Removing Cover For Instrument Panel (Defroster Cover) On Right And Left
        • Installing Cover For Instrument Panel (Defroster Cover)
          • Installing Cover For Instrument Panel (Defroster Cover) On Right And Left
          • Installing Cover For Centre Instrument Panel (Defroster Cover)
        • Subsequent Work
          • Reworking
      • WM 702219 Removing And Installing Cover (Cold Air Bulkhead) (All Models)
        • Removing Cover (Cold Air Bulkhead)
        • Installing Cover (Cold Air Bulkhead)
      • WM 702419 Removing And Installing Front Side Section Trim (All Models)
        • Technical Values
        • Removing Front Side Section Trim
          • Removing Front Side Section Trim Panel (Driver's Side)
          • Removing Front Side Section Trim Panel (Passenger's Side)
        • Installing Front Side Section Trim
          • Installing Front Side Section Trim Panel (Passenger's Side)
          • Installing Front Side Section Trim Panel (Driver's Side)
      • WM 702919 Removing And Installing Trim Panel For Seat Well (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Trim Panel For Seat Well
          • Loosening Seat Belt And Fitting
          • Removing Bushing For Rear Backrest
          • Removing Trim Panel For Seat Well
        • Installing Trim Panel For Seat Well
          • Notes
          • Installing Bushing For Rear Backrest
          • Securing Seat Belt And Fitting
        • Subsequent Work
      • WM 703019 Removing And Installing Front Luggage Compartment Cover (All Models)
        • Preliminary Work
        • Removing Front Luggage Compartment Cover
          • Removing Luggage Compartment Cover
        • Installing Front Luggage Compartment Cover
          • Installing Luggage Compartment Cover
        • Subsequent Work
      • WM 703119 Removing And Installing Rear Wall Trim Panel (All Models)
        • Preliminary Work
        • Removing Rear Wall Trim Panel
        • Subsequent Work
      • WM 703119 Removing And Installing Trim Panel For Rear Wall (Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Trim Panel For Rear Wall
        • Installing Trim Panel For Rear Wall
        • Subsequent Work
      • WM 703355 Replacing Sound Absorber For Seat Well (Except CABRIO)
        • Preliminary Work
        • Installing Sound Absorber For Seat Well
          • Notes
          • Installing Insulation For Seat Well
      • WM 703519 Removing And Installing Footrest (All Models)
        • Removing Footrest
        • Installing Footrest
      • WM 703919 Removing And Installing Cover For Rear Lock Support (TARGA 4 & TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Rear Lock Support
        • Installing Cover For Rear Lock Support
        • Subsequent Work
      • WM 703919 Removing And Installing Cover For Front Lock Mount (All Models)
        • Removing Cover For Lock Mount
        • Installing Cover For Front Lock Mount
          • Installing Cover For Lock Support
          • Additional Assembly Instructions For Replacing Velcro Fasteners
      • WM 704119 Removing And Installing Floor Covering (All Models)
        • Preliminary Work
        • Removing Floor Covering
        • Installing Floor Covering
        • Subsequent Work
      • WM 704555 Replacing Sound Absorber (Insulation) For FLOORPAN Assembly (All Models)
        • Tools
        • Preliminary Work
        • Installing Sound Absorber (Insulation) For Floorpan Assembly
          • Installing Insulation For Floorpan Assembly
      • WM 705155 Replacing Sound Absorber (Insulation) For Passenger Compartment (All Models)
        • Tools
        • Preliminary Work
        • Installing Sound Absorber (Insulation) For Passenger Compartment
          • Installing Sound Absorber For End Plate
          • Installing Seal For Inner Side Section
          • Installing Insulation For Rear Wall
          • Installing Sound Absorber For Spring Strut Mount
          • Installing Sound Absorber For Side Wall
          • Installing Sound Absorber For Firewall Lid
      • WM 705255 Replacing Sound Absorber (Insulation) For Wheel Housing (All Models)
        • Tools
        • Preliminary Work
        • Installing Sound Absorber (Insulation) For Wheel Housing
          • Notes
          • Installing Sound Absorber For Rear Wheel Housing
          • Installing Sound Absorber For Front Wheel Housing
      • WM 705319 Removing And Installing Rear Cover (All Models)
        • Preliminary Work
        • Removing Rear Cover
        • Installing Rear Cover
          • Installing Cover For Rear
        • Subsequent Work
      • WM 705719 Removing And Installing A-Pillar Trim (All Models)
        • Preliminary Work
        • Removing A-Pillar Trim
        • Installing A-Pillar Trim
          • Installing A-Pillar Trim Panel
        • Subsequent Work
      • WM 705719 Removing And Installing A-Pillar Trim Panel (TARGA 4 & TARGA 4S)
        • Preliminary Work
        • Removing A-Pillar Trim Panel
          • Notes
          • Removing Mounting For Fixing Clip
        • Installing A-Pillar Trim Panel
          • Installing Mounting For Fixing Clip
          • Installing A-Pillar Trim Panel
        • Subsequent Work
      • WM 705819 Removing And Installing Trim Strip For The Instrument Panel (All Models)
        • Removing Trim Strip For The Instrument Panel
          • Removing Trim Strip For Dashboard (On Driver's Side)
          • Removing Trim Strip For Dashboard (Cup Holder)
        • Installing Trim Strip For The Instrument Panel
          • Installing Trim Strip For Dashboard (Cup Holder)
          • Installing Trim Strip For Dashboard (On Driver's Side)
      • WM 705919 Removing And Installing Door Panel (All Models)
        • Tools
        • Technical Values
        • Removing Door Panel
          • Removing Trim Panel For Mirror Triangle
          • Removing Lever For Door Opener
          • Removing Covers For Door Panel
          • Releasing Door Panel
          • Disconnecting Electric Plug Connections
          • Removing Actuating Cable For Door Lock
        • Installing Door Panel
          • Replacing Fixing Clips
          • Installing Actuating Cable For Door Lock
          • Locking Electric Plug Connections
          • Installing Door Panel
          • Installing Covers For Door Panel
          • Installing Lever For Door Opener
          • Installing Trim Panel For Mirror Triangle
      • WM 706119 Removing And Installing Cover For Door Panel (All Models)
        • Tools
        • Preliminary Work
          • Notes
          • Removing Cover For Door Panel
          • Installing Cover For Door Panel
        • Subsequent Work
      • WM 706319 Removing And Installing Handle (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Handle
          • Removing Inner Door Handle
          • Disassembling Inner Door Handle
        • Installing Handle
          • Assembling Inner Door Handle
          • Installing Inner Door Handle
          • Installing Handle (Bucket Seat)
        • Subsequent Work
      • WM 706519 Removing And Installing Cover For Oddments Tray (All Models)
        • Preliminary Work
        • Removing Cover For Oddments Tray
          • Removing Lid For Oddments Compartment
        • Installing Cover For Oddments Tray
          • Installing Lid For Oddments Compartment
        • Subsequent Work
      • WM 706719 Removing And Installing B-Pillar Trim (Except CABRIO)
        • Technical Values
        • Removing B-Pillar Trim
          • Removing B-pillar trim panel
        • Installing B-Pillar Trim
          • Installing B-Pillar Trim Panel
      • WM 706819 Removing And Installing C-Pillar Trim (All Models)
        • Technical Values
        • Preliminary Work
          • Notes
          • Loosening Seat Belt And Fitting
        • Removing C-Pillar Trim
          • Removing C-Pillar Trim Panel
        • Installing C-Pillar Trim
          • Installing C-Pillar Trim Panel
        • Subsequent Work
          • Securing Seat Belt And Fitting
          • Subsequent Work
      • WM 707019 Removing And Installing Trim Panel For Mirror Triangle (All Models)
        • Removing Trim Panel For Mirror Triangle
        • Installing Trim Panel For Mirror Triangle
      • WM 707119 Removing And Installing Padding (Bucket Seat) (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removing Padding (Bucket Seat)
        • Installing Padding (Bucket Seat)
        • Subsequent Work
      • WM 707255 Replacing Rear Cover (TARGA 4 & TARGA 4S)
        • Technical Values
        • Removing Rear Cover
        • Installing Rear Trim
          • Installing Rear Cover
      • WM 707519 Removing And Installing Rear Side Trim Panel (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Rear Side Trim Panel
          • Removing Side-Panel Lining At Rear
        • Installing Rear Side Trim Panel
        • Subsequent Work
      • WM 707549 Eliminating Noise Symptoms - Reworking Rear Side Trim Panel (Creaking Noise Between Side Trim Panel And Collar On Rear Seat Backrest Locking Element) (CARR. CABRIO, CARR. S CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Technical Values
        • General Information
          • Symptom
          • Causes And Remedial Action
        • Tools And Materials
          • Materials
        • Reworking Rear Side Trim Panel
        • Working Time
      • WM 708019 Removing And Installing Roof Rail Trim (TARGA 4 & TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Removing Roof Rail Trim
          • Releasing Rear Belt Cover
          • Removing Roof Rail Trim
        • Installing Roof Rail Trim
          • Notes
          • Securing Rear Belt Cover
        • Subsequent Work
      • WM 708119 Removing And Installing Trim Panel For Roll-Over Protection (Speedster)
        • Preliminary Work
        • Removing Trim Panel For Roll-Over Protection
        • Installing Trim Panel For Roll-Over Protection
          • Pre-Fitting Pocket On Roll-Over Protection Trim Panel
          • Installing Trim Panel For Roll-Over Protection
          • Sticking On Protective Film
        • Subsequent Work
      • Template With Protective Film (All Models)
      • WM 708219 Removing And Installing Front Trim (TARGA 4 & TARGA 4S)
        • Technical Values
        • Preliminary Work
          • Notes
          • Removing Front Trim Panel
        • Installing Front Trim
          • Installing Front Trim Panel
        • Subsequent Work
      • WM 708319 Removing And Installing Front Roof Trim Panel (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Front Roof Trim Panel
        • Installing Front Roof Trim Panel
        • Subsequent Work
      • WM 708419 Removing And Installing Roof Lining (Except CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Roof Lining
          • Removing Cover For Motor For Sliding Roof
          • Disconnecting Electric Plug Connection
          • Removing Mounting Saddle And Pivot Bearing For Sun Visor
          • Removing Headliner
        • Installing Roof Lining
          • Fitting Headliner
          • Installing Mounting Saddle And Pivot Bearing For Sun Visor
          • Locking Electric Plug Connection
          • Installing Cover For Sunroof Motor
        • Subsequent Work
      • WM 708519 Removing And Installing Rear Roof Lining (Except CABRIO)
        • Removing Rear Roof Lining
          • Removing Rear Roof Trim Panel
        • Installing Rear Roof Lining
          • Installing Rear Roof Trim Panel
      • WM 708519 Removing And Installing Rear Roof Trim Panel (TARGA 4 & TARGA 4S)
        • Removing Rear Roof Trim Panel
        • Installing Rear Roof Trim Panel
      • WM 708619 Removing And Installing Slide/Tilt Sunroof Trim (Except CABRIO)
        • Preliminary Work
        • Removing Slide/Tilt Sunroof Trim
        • Additional Instructions For Removing The Inner Panels
        • Installing Slide/Tilt Sunroof Trim
          • Additional Instructions For Fitting The Inner Panels
          • Installing Slide/Tilt Sunroof Trim
        • Subsequent work
      • WM 708619 Removing And Installing Trim Panel For Sliding/Lifting Roof (TARGA 4 & TARGA 4S)
        • Removing Trim Panel For Sliding/Lifting Roof
        • Installing Trim Panel For Sliding/Lifting Roof
  • Frames, Subframes & Crossmembers
    • 07 - PORSCHE Dynamic Repair -- CARRERA (997)
      • WM 0710IN General (All Models)
        • General information on "Porsche Dynamic Repair"
      • WM 0720IN Glass Repairs (All Models)
        • Tools
        • Conditions for repairs
        • Preparation
        • Repair procedure
      • WM 0730IN Dent Repairs (All Models)
        • Tools
        • General information
        • Prerequisites
        • Success factors
        • Technical restrictions of the repair
        • Procedure
          • General procedure
          • Clock method
          • Dent massage (for larger dents)
      • WM 0740IN Interior Cosmetic Repairs (All Models)
        • Tools
        • Technical values
        • General information
        • Repair restrictions
        • Creating pattern imprint
        • Vinyl repairs
        • Leather repairs
        • Painting and dyeing
      • WM 0750IN Paint Repairs (All Models)
        • General information and repair areas
      • WM 0760IN Alloy Wheel Reconditioning (All Models)
        • Repair restrictions and conditions
        • Repair restrictions
  • Seats
    • 72 - Seat Frames -- CARRERA (997)
      • WM 720119 Removing And Installing Bucket Seat (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Removing Bucket Seat
          • Loosening Seat Belt Mount On Bucket Seat
          • Undoing Seat Screws At The Rear
          • Removing Seat Rail Cover
          • Undoing Seat Screws At The Front
          • Disconnecting Plug Connection On Bucket Seat
        • Installing Bucket Seat
          • Locking Plug Connection On Bucket Seat
          • Tightening Seat Screws At The Front
          • Installing Seat Rail Cover
          • Tightening Seat Screws At The Rear
          • Securing Seat Belt Mount On Bucket Seat
      • WM 720119 Removing And Installing Folding Sports Bucket Seat (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Folding Sports Bucket Seat
          • Loosening Seat Belt Mount On Sports Bucket Seat
          • Loosening Sports Bucket Seat
          • Disconnecting Plug Connection For AWS Control Unit
          • Disconnecting Central Connector
        • Installing Folding Sports Bucket Seat
          • Locking Central Connector
          • Locking Plug Connection For AWS Control Unit
          • Securing Sports Bucket Seat
          • Securing Seat Belt Mount To The Sports Bucket Seat
      • WM 720119 Removing And Installing Front Seat (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Front Seat
          • Removing Seat Rail Cover
          • Undoing Seat Screws At Front
          • Undoing Seat Screws At Rear
          • Releasing Electrical Wire
          • Disconnecting Central Plug
          • Disconnecting Electrical Plug Connection (Power Seat)
          • Disconnecting The Electrical Plug Connection Of The AWS Control Module
        • Installing Front Seat
          • Fastening Electric Line
          • Locking The Electrical Plug Connection Of The AWS Control Module
          • Connecting Electrical Plug Connection (Power Seat)
          • Locking Central Plug
          • Tightening Seat Screws At Rear
          • Tightening Seat Screws At The Front
          • Fit Seat Rail Cover
        • Subsequent Work
      • WM 720155 Disassembling And Assembling Bucket Seat (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Preliminary Work
        • Disassembling Bucket Seat
          • Removing Cover For Seatbelt Support (Bucket Seat)
          • Removing Cover For Belt Guide (Bucket Seat)
          • Removing Seat Cushion (Bucket Seat)
        • Assembling Bucket Seat
          • Installing Seat Cushion (Bucket Seat)
          • Installing Cover For Belt Guide (Bucket Seat)
          • Installing Cover For Seatbelt Support (Bucket Seat)
        • Subsequent Work
      • WM 7201IN Mounting Front Seat On Assembly Fixture (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Mounting Front Seat On Assembly Fixture
      • WM 720619 Removing And Installing Air Cushion Switch (Except CARRERA 4 GTS, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Air Cushion Switch
          • Removing Control Unit For Memory Seat Adjustment With Support
          • Removing Switch For Air Cushion
        • Installing Air Cushion Switch
          • Installing Switch For Air Cushion
          • Installing Control Unit For Memory Seat Adjustment With Support
        • Subsequent Work
      • WM 720919 Removing And Installing Front Seat Frame (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Seat Frame
        • Installing Front Seat Frame
        • Subsequent Work
      • WM 720955 Replacing Front Seat Frame (Bucket Seat) (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Front Seat Frame (Bucket Seat)
        • Installing Front Seat Frame (Bucket Seat)
        • Subsequent Work
      • WM 720955 Replacing Front Seat Frame (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Disassembling Seat Frame
          • Installing Frame For Seat Surface
          • Removing Backrest Frame
        • Assembling Seat Frame
          • Installing Backrest Frame
          • Installing Frame For Seat Surface
        • Subsequent Work
      • WM 720955 Replacing Front Seat Frame (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Seat Frame
        • Installing Front Seat Frame
        • Subsequent Work
      • WM 720955 Replacing Seat Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Disassembling Seat Frame
          • Removing Cover For AWS Sensor On Left And Right
          • Removing Frame For Seat Surface
          • Removing Backrest Frame
        • Assembling Seat Frame
          • Installing Backrest Frame
          • Installing Frame For Seat Surface
          • Installing Cover For AWS Sensor On Left And Right
        • Subsequent Work
      • WM 721155 Replacing Guide Rail (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Guide Rail
          • Notes
          • Removing Guide Rail (Passenger Seat With Seat Occupancy Detection)
        • Installing Guide Rail
          • Installing Guide Rail (Passenger Seat With Seat Occupancy Detection)
          • Installing Guide Rail
        • Subsequent Work
      • WM 721419 Removing And Installing Air Cushion For Seat (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Air Cushion For Seat
        • Installing Air Cushion For Seat
        • Subsequent Work
      • WM 721619 Removing And Installing Control Module Trim Panel (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Control Module Trim panel
          • Preliminary Work
          • Removing Control Part Trim Panel
          • Removing Control Part Trim Panel (With Mechanical Lever)
        • Installing Control Module Trim Panel
          • Installing Control Part Trim Panel
          • Installing Control Part Trim Panel (Mechanical)
          • Subsequent Work
      • WM 721719 Removing And Installing Air Cushion For Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Air Cushion For Backrest
          • Notes
          • Removing Hose For Air Cushion Control Valve
        • Installing Air Cushion For Backrest
          • Installing Hose For Air Cushion Control Valve
          • Installing Air Cushion For Backrest
          • Checking Seat Following Removal
        • Subsequent Work
      • WM 721955 Replacing Backrest Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Disassembling Backrest Frame
          • Removing Foam Part
          • Removing Supports For Backrest Side Parts
          • Removing Inner Spring On Backrest Frame
          • Disconnecting Wire Harnesses On Backrest Frame
          • Removing Frame For Side Airbag
          • Disassembling Backrest Frame
          • Removing Backrest Frame
        • Assembling Backrest Frame
          • Installing Backrest Frame
          • Assembling Backrest Frame
          • Installing Frame For Side Airbag
          • Securing Wire Harnesses On Backrest Frame
          • Installing Inner Spring On Backrest Frame
          • Installing Supports For Backrest Side Parts
          • Fitting Foam Part
        • Subsequent Work
      • WM 721955 Replacing Backrest Frame (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Disassembling Backrest Frame
          • Removing Inner Spring On Backrest Frame
          • Removing Frame For Side Airbag
          • Disassembling Backrest Frame
          • Removing Backrest Frame
        • Assembling Backrest Frame
          • Installing Backrest Frame
          • Assembling Backrest Frame
          • Installing Frame For Side Airbag
          • Installing Inner Spring On Backrest Frame
        • Subsequent Work
      • WM 722419 Removing And Installing Cushion Carrier For Front Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
          • Notes
          • Preliminary Work
        • Removing Cushion Carrier For Front Backrest
          • Notes
          • Removing Cushion Carrier For Front Backrest
        • Installing Cushion Carrier For Front Backrest
          • Notes
          • Installing Cushion Carrier For Front Backrest
        • Subsequent Work
          • Notes
          • Subsequent Work
      • WM 722419 Removing And Installing Cushion Carrier For Front Backrest (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Preliminary Work
        • Removing Cushion Carrier For Front Backrest
        • Installing Cushion Carrier For Front Backrest
        • Subsequent Work
      • WM 722419 Removing And Installing Cushion Carrier For Front Backrest (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Cushion Carrier For Front Backrest
        • Installing Cushion Carrier For Front Backrest
        • Subsequent Work
      • WM 722455 Replacing Cushion Carrier For Front Backrest (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Disassembling Cushion Carrier For Front Backrest
          • Removing Collar For Backrest Release
        • Assembling Cushion Carrier For Front Backrest
          • Installing Collar For Backrest Release
        • Subsequent Work
      • WM 722519 Removing And Installing BOWDEN Cable For Backrest Release (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Bowden Cable For Backrest Release
          • Notes
          • Removing Backrest Frame Release
        • Installing Bowden Cable For Backrest Release
          • Installing Backrest Frame Release
          • Installing Bowden Cable For Backrest Release
        • Subsequent Work
          • Reworking
      • WM 722519 Removing And Installing BOWDEN Cable For Backrest Release (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Bowden Cable For Backrest Release
        • Installing Bowden Cable For Backrest Release
        • Subsequent Work
      • WM 722619 Removing And Installing Cover For Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Cover For Backrest
          • Preliminary Work
          • Removing Cover For Outer Backrest
          • Removing Cover For Inner Backrest
        • Installing Cover For Backrest
          • Installing Cover For Inner Backrest
          • Installing Cover For Outer Backrest
          • Subsequent Work
      • WM 722819 Removing And Installing Height Adjustment Lever (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Removing Height Adjustment Lever
        • Installing Height Adjustment Lever
      • WM 722955 Replacing Retainer Plate For Seat Adjustment Motor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Retainer Plate For Seat Adjustment Motor
          • Removing Retainer Plate
        • Installing Retainer Plate For Seat Adjustment Motor
          • Installing Retainer Plate
        • Subsequent Work
      • WM 723119 Removing And Installing Control Button For Backrest Release (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Control Button For Backrest Release
        • Installing Control Button For Backrest Release
      • WM 723119 Removing And Installing Loop For Backrest Release (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Loop For Backrest Release
        • Installing Loop For Backrest Release
        • Subsequent Work
      • WM 723219 Removing And Installing Lock For Backrest Adjustment (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Lock For Backrest Adjustment
          • Removing Upper Part Of Lock
          • Removing Lower Part Of Lock
        • Installing Lock For Backrest Adjustment
          • Installing Lower Part Of Lock
          • Installing Upper Part Of Lock
        • Adjusting Lock For Backrest Adjustment
          • Adjusting Upper/Lower Part Of Lock
        • Subsequent Work
      • WM 723319 Removing And Installing Control Valve For Lumbar Support Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Control Valve For Lumbar Support Adjustment
          • Taking Off Foam Part
          • Removing Control Valve For Lumbar Support Adjustment
        • Installing Control Valve For Lumbar Support Adjustment
          • Notes
          • Checking Seat Following Removal
          • Fitting Foam Part
        • Subsequent Work
          • Reworking
      • WM 723419 Removing And Installing Lumbar Support (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Lumbar Support
          • Taking Off Foam Part
          • Removing Lumbar Support
        • Installing Lumbar Support
          • Notes
          • Checking Seat Following Removal
          • Fitting Foam Part
        • Subsequent Work
          • Reworking
      • WM 723619 Removing And Installing Motor For Lumbar Support (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Motor For Lumbar Support
          • Removing Support For Left Backrest Side Part
          • Taking Off Foam Part
          • Removing Motor For Lumbar Support
        • Installing Motor For Lumbar Support
          • Notes
          • Checking Seat Following Removal
          • Fitting Foam Part
          • Installing Support For Left Backrest Side Part
        • Subsequent Work
      • WM 723819 Removing And Installing Control Valve For Air Cushion (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Control Valve For Air Cushion
        • Installing Control Valve For Air Cushion
        • Subsequent Work
      • WM 723919 Removing And Installing Motor For Air Cushion (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Motor For Air Cushion
          • Removing Air Cushion Motor
        • Installing Motor For Air Cushion
          • Installing Air Cushion Motor
        • Subsequent Work
      • WM 724719 Removing And Installing Rear Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Rear Backrest
        • Installing Rear Backrest
        • Subsequent Work
      • WM 726319 Removing And Installing Locking Mechanism For Rear Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Locking Mechanism For Rear Backrest
        • Installing Locking Mechanism For Rear Backrest
        • Subsequent Work
      • WM 728619 Removing And Installing Switch For Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Switch For Seat Adjustment
        • Installing Switch For Seat Adjustment
        • Subsequent Work
      • WM 728719 Removing And Installing Motor For Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing Motor For Seat Adjustment
        • Installing Motor For Seat Adjustment
        • Subsequent Work
      • WM 728819 Removing And Installing Motor For Front Vertical Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Motor For Front Vertical Adjustment
          • Removing Control Unit For Memory Seat Adjustment With Support
          • Removing Motor For Front Vertical Adjustment
        • Installing Motor For Front Vertical Adjustment
          • Notes
          • Installing Control Unit For Memory Seat Adjustment With Support
        • Subsequent Work
      • WM 728919 Removing And Installing Motor For Backrest Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Motor For Backrest Adjustment
          • Removing Backrest Side Support
          • Removing Motor For Backrest Adjustment
        • Installing Motor For Backrest Adjustment
          • Notes
          • Checking Seat Following Removal
          • Installing Backrest Side Support
        • Subsequent Work
      • WM 729219 Removing And Installing Motor For Rear Vertical Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Motor For Rear Vertical Adjustment
        • Installing Motor For Rear Vertical Adjustment
        • Subsequent Work
      • WM 729319 Removing And Installing Control Unit For Memory Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Control Unit For Memory Seat Adjustment
        • Removing Control Unit For Memory Seat Adjustment
        • Installing Control Unit For Memory Seat Adjustment
        • Subsequent Work
          • Subsequent Work For Control Unit For Memory Seat Adjustment
        • Programming Control Unit
          • Reading Out And Printing Out Values
          • Programming Control Unit
      • WM 729419 Removing And Installing Switch For Memory Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing Switch For Memory Seat Adjustment
        • Installing Switch For Memory Seat Adjustment
    • 74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)
      • WM 740919 Removing And Installing Suction Fan For Seat Surface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Suction Fan For Seat Surface
          • Removing Suction Fan For Seat Surface (Driver's Side)
          • Removing Suction Fan For Seat Surface (Passenger's Side)
        • Installing Suction Fan For Seat Surface
          • Installing Suction Fan For Seat Surface (Driver's Side)
          • Installing Suction Fan For Seat Surface (Passenger's Side)
        • Subsequent Work
      • WM 741019 Removing And Installing Padding For Front Seat (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Seat
          • Disconnecting Wire Harness For Heated Seats
          • Removing Padding For Seat
        • Installing Padding For Front Seat
          • Installing Padding For Seat
          • Securing Wire Harness For Heated Seats
          • Checking Seat Following Removal
        • Subsequent Work
      • WM 741019 Removing And Installing Padding For Front Seat (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Seat
          • Disconnecting Wire Harness For Heated Seats
          • Removing Padding For Front Seat
        • Installing Padding For Front Seat
          • Notes
          • Securing Wire Harness For Heated Seats
        • Subsequent Work
          • Checking Seat Following Removal
          • Subsequent Work
      • WM 741055 Replacing Padding For Front Seat (Folding Sports Bucket Seat) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Seat
          • Removing Seat Cushion Padding (Front Part)
          • Removing Seat Cushion Padding (Rear Part)
          • Removing Padding For Side Bolsters
        • Installing Padding For Front Seat
          • Installing Padding For Side Bolsters
          • Installing Seat Cushion Padding (Rear Part)
          • Installing Padding For Seat Cushion (Front Part)
        • Subsequent Work
      • WM 741319 Removing And Installing Cover For Front Seat (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Preliminary Work
        • Removing Cover For Front Seat
        • Installing Cover For Front Seat
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • WM 741319 Removing And Installing Cover For Front Seat (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Cover For Front Seat
        • Installing Cover For Front Seat
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • WM 741319 Removing And Installing Cover For Front Seat (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Preliminary Work
        • Removing Cover For Front Seat
          • Removing Seat Cushion (Front Part)
          • Removing Seat Cushion (Rear Part)
          • Removing Cover For Side Of Seat
        • Installing Cover For Front Seat
          • Installing Cover For Side Of Seat
          • Installing Seat Cushion (Rear Part)
          • Installing Seat Cushion (Front Part)
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • Driver's Manual Enclosure
        • Care Instructions For Water Stains And Damp Stops On Seats With Seat Ventilation
      • WM 7413N0 Eliminating Symptoms In Body Interior: Reworking Seat Cover On Air-Conditioned Seat (I-No. 541) (Spots On Seat Cover/SY0411) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • General Information
          • Symptom
          • Causes And Remedial Action
            • Notes
            • Remedial Action
        • Tools And Materials
      • WM 741519 Removing And Installing Cover For Suction Fan For Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Cover For Suction Fan For Backrest
          • Notes
          • Disassembling Cover For Suction Fan
        • Installing Cover For Suction Fan For Backrest
          • Assembling Cover For Suction Fan
          • Installing Cover For Suction Fan For Backrest
      • WM 741619 Removing And Installing Suction Fan For Backrest Surface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Suction Fan For Backrest Surface
        • Installing Suction Fan For Backrest Surface
        • Subsequent Work
      • WM 741719 Removing And Installing Padding For Front Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Backrest
          • Releasing Wire Harness For Backrest Seat Heating
          • Removing Padding For Front Backrest
        • Installing Padding For Front Backrest
          • Notes
          • Installing Padding For Front Backrest
          • Securing Wire Harness For Backrest Seat Heating
          • Checking Seat Following Removal
        • Subsequent Work
      • WM 741719 Removing And Installing Padding For Front Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Backrest
        • Installing Padding For Front Backrest
        • Subsequent Work
      • WM 741719 Removing And Installing Padding For Front Backrest (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Backrest
        • Installing Padding For Front Backrest
        • Subsequent Work
      • WM 741819 Removing And Installing Padding For Front Middle Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Middle Backrest
        • Installing Padding For Front Middle Backrest
        • Subsequent Work
      • WM 741819 Removing And Installing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Middle Backrest
        • Installing Padding For Front Middle Backrest
        • Subsequent Work
      • WM 741855 Replacing Padding For Front Middle Backrest (Folding Sports Bucket Seat) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Padding For Front Middle Backrest
        • Installing Padding For Front Middle Backrest
        • Subsequent Work
      • WM 741919 Removing And Installing Cover For Front Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Preliminary Work
          • Notes
          • Preliminary Work
        • Removing Cover For Front Backrest
          • Notes
          • Removing Guide For Seat Belt
          • Removing Cover For Front Backrest
        • Installing Cover For Front Backrest
          • Installing Cover For Backrest
          • Installing Guide For Seat Belt
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • WM 741919 Removing And Installing Cover For Front Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Cover For Front Backrest
        • Installing Cover For Front Backrest
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Checking Seat Following Removal
          • Subsequent Work
      • WM 741919 Removing And Installing Cover For Front Backrest (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Tools And Materials
        • Preliminary Work
        • Removing Cover For Front Backrest
        • Installing Cover For Front Backrest
        • Subsequent Work
          • Removing Creases In Seat Cover (Leather)
          • Subsequent Work
      • WM 742019 Removing And Installing Cover For Front Middle Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Cover For Front Middle Backrest
        • Installing Cover For Front Middle Backrest
      • WM 742019 Removing And Installing Cover For Front Middle Backrest (Air-Conditioned Comfort Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Cover For Front Middle Backrest
        • Installing Cover For Front Middle Backrest
      • WM 742019 Removing And Installing Cover For Front Middle Backrest (Folding Sports Bucket Seat) (Except 911 "Sport Classic", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Cover For Front Middle Backrest
        • Installing Cover For Front Middle Backrest
      • WM 742319 Removing And Installing Backrest Pocket (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Backrest Pocket
          • Removing Cover For Front Middle Backrest
          • Removing Backrest Pocket
          • Replacing Cover For Backrest Pocket
        • Installing Backrest Pocket
          • Notes
          • Installing Cover For Front Middle Backrest
      • WM 742819 Removing And Installing Heating Element For Front Seat (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Information
          • Spare Parts Information
      • WM 742919 Removing And Installing Heating Element For Backrest (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Information
          • Spare Parts Information
      • WM 745719 Removing And Installing Rear Seat Cushion (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing Rear Seat Cushion
          • Removing Back Seat Cushion
        • Installing Rear Seat Cushion
          • Installing Back Seat Cushion
  • Sun Roof/T-Top/Convertible Top
    • 60 - Sliding Roof, Tilting Roof -- CARRERA (997)
      • WM 6000AW Safety Instructions (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Safety Instructions For Airbag System
        • Safety Instructions For Work On Car Windows
          • Danger Of Injury When Working On Vehicle Windows
          • Material Damage When Removing The Glass From Car Windows
          • Material Damage When Inserting The Glass Into Car Windows
        • Safety Instructions For Installation Work
          • Safety Instructions For Airbag System
          • Safety Instructions For Sliding Roof
          • Safety Instructions For The Heat Shield
      • WM 600613 Mounting Roof Assembly On Assembly Fixture (911 TARGA 4, 911 TARGA 4S)
        • Tools
        • Technical Values
        • Mounting Roof Assembly On Assembly Fixture
      • WM 600619 Removing And Installing Roof Module (911 TARGA 4, 911 TARGA 4S)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Roof Module
          • Removing Support For Rear Wall At The Left And Right
          • Removing Support For Side Trim Panel At The Left And Right
          • Removing Roof Assembly
        • Installing Roof Module
          • Preparing Roof Assembly And Vehicle For Installation
          • Installing Roof Assembly
          • Installing Support For Side Trim Panel At The Left And Right
          • Installing Support For Rear Wall At The Left And Right
        • Subsequent Work
      • WM 600649 Eliminating Noise Symptoms - Reworking Roof Assembly (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • General Information
          • Symptoms
          • Causes And Remedial Action
          • Procedure For Eliminating Noises From The Roof Assembly
        • Reworking Sliding-Roof Panel/Roof Joint Cover Strip
          • Tools And Materials
            • Tools
            • Materials
          • Reworking Roof Joint Cover Strip
        • Reworking Drive Mechanism
          • Tools And Materials
            • Materials
          • Reworking Drive Mechanism
        • Reworking Air Deflector
          • Tools And Materials
            • Tools
            • Materials
          • Reworking Air Deflector
        • Reworking Seal For Centre Joint
          • Tools And Materials
            • Materials
          • Reworking Seal For Centre Joint
        • Reworking Sunroof Seal At The Bottom
          • Tools And Materials
            • Tools
            • Materials
          • Reworking Sunroof Seal At The Bottom
        • Reworking Sunroof Seal At The Top
          • Tools And Materials
            • Tools
            • Materials
          • Reworking Sunroof Seal At The Top
        • Reworking Cowl Panel Cover
          • Tools And Materials
            • Tools
            • Materials
          • Reworking Cowl Panel Cover
        • Reworking Rear Window Cover
        • Reworking Trim Frame For Rear Window
          • Tools And Materials
            • Tools
            • Materials
          • Reworking Trim Frame For Rear Window
      • WM 600655 Replacing Roof Assembly (Frame)
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Roof Assembly Frame
          • Disassembling Roof Assembly Frame
          • Assembling Roof Assembly Frame
        • Subsequent Work
      • WM 601219 Removing And Installing Switch For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2)
        • Removing Switch For Sliding Roof
          • Removing Cover For Motor For Sliding Roof
          • Removing Switch For Sliding Roof
        • Installing Switch For Sliding Roof
          • Notes
          • Installing Cover For Sunroof Motor
      • WM 601419 Removing And Installing Motor For Glass Sunroof (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 Gt3, 911 Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Motor For Sunroof
        • Removing Electric Motor For Sunroof
          • Removing Left Electric Motor For Sunroof
          • Removing Right Electric Motor For Sunroof
        • Installing Electric Motor For Sunroof
          • Installing Left Electric Motor For Sunroof
          • Installing Right Electric Motor For Sunroof
        • Replacing Microswitch For Closing The Sunroof
          • Notes
          • Installing Microswitch For Closing The Sunroof
          • Adjusting Microswitch For Closing The Sunroof
        • Subsequent Work
          • Subsequent Work For Motor For Sunroof
        • Information
          • Sunroof Emergency Operation
      • WM 601419 Removing And Installing Motor For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style" 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2)
        • Technical Values
        • Removing Motor For Sliding Roof
          • Removing Cover For Motor For Sliding Roof
          • Removing Motor For Sunroof
        • Installing Motor For Sliding Roof
          • Notes
          • Installing Cover For Sunroof Motor
        • Information
          • Emergency Operation On Motor For Sliding Roof
          • Storing End Positions Of Motor For Sliding Roof
      • WM 602719 Removing And Installing Guide For Fabric Lining (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Tools And Materials
          • Making A Distance Gauge
        • Removing Guide For Fabric Lining
        • Installing Guide For Fabric Lining
        • Subsequent Work
      • WM 602819 Removing And Installing Frame For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Frame For Sliding Roof
        • Installing Frame For Sliding Roof
        • Subsequent Work
      • WM 602819 Removing And Installing Frame For Sliding Roof Cover (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Removing Frame For Sliding Roof Cover
        • Installing Frame For Sliding Roof Cover
        • Subsequent Work
      • WM 602837 Disassembling And Assembling Frame For Sunroof Cover (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Disassembling Frame For Sunroof Cover
          • Disassembling Frame For Sliding Roof Cover
        • Assembling Frame For Sunroof Cover
          • Assembling Frame For Sliding Roof Cover
        • Subsequent Work
      • WM 602837 Disassembling And Assembling Frame For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Disassembling Frame For Sliding Roof
        • Converting Frame For Sliding Roof
        • Assembling Frame For Sliding Roof
        • Subsequent Work
      • WM 603255 Replacing Cowl Panel Cover (911 TARGA 4, 911 TARGA 4S)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cowl Panel Cover
        • Installing Cowl Panel Cover
        • Subsequent Work
      • WM 603319 Removing And Installing Air Deflector (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Removing Air Deflector
        • Installing Air Deflector
        • Subsequent Work
      • WM 603515 Adjusting Mounting Unit (Drive Mechanism) (911 TARGA 4, 911 TARGA 4S)
        • Tools
        • Technical Values
        • Preliminary Work
          • Removing Rear Roof Trim Panel
          • Removing Front Fabric Lining
          • Detaching Sunroof Motor
        • Tools And Materials
        • Adjusting Mounting Unit (Drive Mechanism)
        • Subsequent Work
          • Installing Front Fabric Lining
          • Installing Rear Roof Trim Panel
      • WM 603555 Replacing Holder Unit (Drive Mechanism) (911 TARGA 4, 911 TARGA 4S)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Holder Unit (Drive Mechanism)
          • Removing Mounting Unit (Drive Mechanism)
        • Installing Holder Unit (Drive Mechanism)
          • Preparing Mounting Unit (Drive Mechanism) For Installation
          • Installing Holder Unit (Drive Mechanism)
        • Subsequent Work
      • WM 603755 Replacing Metal Guide Tube For Holder Unit (911 TARGA 4, 911 TARGA 4S)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Metal Guide Tube For Holder Unit
        • Installing Metal Guide Tube For Holder Unit
        • Subsequent Work
      • WM 604019 Removing And Installing Cover For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Technical Values
        • Removing Cover For Sliding Roof
        • Installing Cover For Sliding Roof
      • WM 604219 Removing And Installing Seal For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Removing Seal For Sliding Roof
        • Installing Seal For Sliding Roof
        • Subsequent Work
      • WM 606119 Removing And Installing Fabric Lining (911 TARGA 4, 911 TARGA 4S)
        • Preliminary Work
        • Removing Fabric Lining
          • Removing Front Fabric Lining
          • Removing Rear Fabric Lining
        • Installing Fabric Lining
          • Installing Rear Fabric Lining
          • Installing Front Fabric Lining
        • Subsequent Work
      • WM 606519 Removing And Installing Sunroof Control Unit (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Sunroof Control Unit
        • Removing Sunroof Control Unit
        • Installing Sunroof Control Unit
        • Subsequent Work
          • Subsequent Work For Sunroof Control Unit
      • WM 607019 Removing And Installing Sun Blind (911 TARGA 4, 911 TARGA 4S)
        • Preliminary Work
        • Removing Sun Blind
        • Installing Sun Blind
        • Subsequent Work
      • WM 607219 Removing And Installing Motor For Sunroof Blind (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Motor For Sunroof Blind
        • Removing Motor For Sunroof Blind
        • Installing Motor For Sunroof Blind
        • Subsequent Work
          • Subsequent Work For Motor For Sunroof Blind
    • 61 - Convertible Top, Hardtop -- CARRERA (997)
      • WM 610115 Adjusting Convertible Top (CABRIO Models)
        • Technical Values
        • Adjusting Convertible Top
          • Adjusting Assembly Aids
          • Adjusting Convertible-Top Peg Housing
          • Checking Diagonal Dimension Of Styling Edge
          • Adjusting Tension Cable On Adjusting Piece
          • Adjusting End Setting For Convertible-Top Resting Position
      • WM 610119 Removing And Installing Convertible Top (CABRIO Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Tools And Materials
          • Tools
        • Removing Convertible Top
        • Installing Convertible Top
        • Subsequent Work
      • WM 610141 Convertible Top Repair - After Emergency Operation (CABRIO Models)
        • Preliminary Work
        • Convertible Top Repair - After Emergency Operation
          • Repairing Convertible-Top Compartment Lid Drive
        • Subsequent Work
      • WM 6101IN Convertible Top Service Position (CABRIO Models)
        • Convertible Top Service Position
          • Move Convertible Top To Service Position
          • Ending Convertible Top Service Position
      • WM 6101IN Diagram Of Convertible Top (CABRIO Models)
        • Diagram Of Convertible Top
      • WM 6101IN Overview Of Convertible-Top Components (CABRIO Models)
        • Overview Of Convertible-Top Components
      • WM 6101K2 Calibrating Convertible Top (CABRIO Models)
        • Preliminary Work
          • Preliminary Work For Calibration
        • General Warning Notes
          • Warning Note On Calibration
          • Calibrating Convertible Top
      • WM 610215 Adjusting The Hardtop (CABRIO Models)
        • Tools
        • Technical Values
        • Adjusting The Hardtop
      • WM 610219 Removing And Installing Hardtop (CABRIO Models)
        • Technical Values
        • Removing Hardtop
        • Installing Hardtop
      • WM 610237 Disassembling And Assembling Hardtop (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Disassembling Hardtop
        • Assembling Hardtop
        • Subsequent Work
      • WM 6102IN Assembly Instructions For Hardtop Assembly Fixture (CABRIO Models)
        • Tools
        • Tools And Materials
        • Assembly Instructions For Hardtop Assembly Fixture
          • Making Support Cheeks
          • Making Swivel Arm
          • Fitting Swivel And Support Cheeks On The Basic Plate
          • Fitting Mounting Points For The Hardtop Locking Lever On The Plate
          • Fitting Horizontal Banner Arm And Support On The Base Plate
      • WM 610519 Removing And Installing Latch At Front (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Latch At Front
          • Removing Front Lock
        • Installing Latch At Front
          • Installing Front Lock
        • Subsequent Work
      • WM 610919 Removing And Installing Hood Inner Lining (CABRIO Models)
        • Preliminary Work
        • Removing Hood Inner Lining
          • Notes
          • Removing Hood Inner Lining At Rear
          • Removing Hood Inner Lining At Sides
        • Installing Hood Inner Lining
          • Installing Hood Inner Lining At Sides
          • Installing Hood Inner Lining At Rear
          • Installing Hood Inner Lining At Front
        • Subsequent Work
      • WM 610919 Removing And Installing Convertible-Top Inner Lining (Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Convertible-Top Inner Lining
        • Installing Convertible-Top Inner Lining
        • Subsequent Work
      • WM 611019 Removing And Installing Front Convertible-Top Mount (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Front Convertible-Top Mount
          • Removing Centering Journal
          • Removing Centering Journal (Hardtop)
          • Removing Convertible-Top Peg Mount
        • Installing Front Convertible-Top Mount
          • Installing Centering Journal
          • Installing Centering Journal (Hardtop)
          • Installing Convertible-Top Peg Mount
        • Subsequent Work
      • WM 611119 Removing And Installing The Rear Hardtop Locking Element (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing The Rear Hardtop Locking Element
          • Removing Rear Hardtop Locking Mechanism
        • Installing The Rear Hardtop Locking Element
          • Installing Rear Hardtop Locking Mechanism
        • Subsequent Work
      • WM 611419 Removing And Installing Water Drip Pan (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Water Drip Pan
          • Notes
          • Removing Water Channel
        • Installing Water Drip Pan
          • Installing Water Channel
          • Installing Water Drip Pan
        • Subsequent Work
      • WM 611719 Removing And Installing Hardtop Fastening (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Hardtop Fastening
          • Removing Bracket For Hardtop Mount
        • Installing Hardtop Fastening
          • Installing Bracket For Hardtop Mount
        • Subsequent Work
      • WM 611919 Removing And Installing Convertible Top Lock (CABRIO Models)
        • Technical Values
        • Removing Convertible Top Lock
          • Removing Cover For Convertible Top Lock
          • Removing Convertible Top Lock
        • Installing Convertible Top Lock
          • Notes
          • Installing Cover For Convertible Top Lock
      • WM 611919 Removing And Installing Convertible Top Lock (Speedster)
        • Technical Values
        • Removing Convertible Top Lock
        • Installing Convertible Top Lock
      • WM 612119 Removing And Installing Cover Strip (Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Cover Strip
        • Installing Cover Strip
        • Subsequent Work
      • WM 612219 Removing And Installing Seal For Cowl Panel Frame (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Seal For Cowl Panel Frame
        • Installing Seal For Cowl Panel Frame
        • Subsequent Work
      • WM 612819 Removing And Installing Hood Covering (CABRIO Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Hood Covering
        • Installing Hood Covering
        • Replacing Tension Strap And Bracing Strap
        • Subsequent Work
      • WM 6128IN Care And Cleaning Of The Hood (CABRIO Models)
        • Care And Cleaning Of The Hood
          • General Information
          • General Information On Cleaning The Hood
          • Procedure For Cleaning The Hood
          • Preparing The Hood For Hot-Steam Cleaning
          • Care Of Convertible-Top Seals
      • WM 613055 Replacing Hood Frame (CABRIO Models)
        • Technical Values
        • Replacing Hood Frame
          • Installing Hood Frame
          • Installing Tension Strap
          • Installing Spring Plate
          • Installing Plastic Panel
          • Installing Styling Frame
      • WM 613219 Removing And Installing Pneumatic Spring (Convertible-Top Compartment Lid) (Speedster)
        • Preliminary Work
        • Removing Pneumatic Spring (Convertible-Top Compartment Lid)
          • Removing Pneumatic Spring
        • Installing Pneumatic Spring (Convertible-Top Compartment Lid)
          • Installing Pneumatic Spring
        • Subsequent Work
      • WM 613919 Removing And Installing Seal For Hood Tip (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Seal For Hood Tip
          • Removing Cover Strip
          • Removing Seal For Hood Tip
        • Installing Seal For Hood Tip
          • Notes
          • Installing Cover Strip
        • Subsequent Work
      • WM 614019 Removing And Installing Flap Motor (CABRIO Models)
        • Tools
        • Preliminary Work
        • Removing Flap Motor
        • Installing Flap Motor
        • Subsequent Work
      • WM 614119 Removing And Installing Microswitch For Flap (CABRIO Models)
        • Tools
        • Preliminary Work
        • Removing Microswitch For Flap
        • Installing Microswitch For Flap
        • Subsequent work
      • WM 614219 Removing And Installing Rear Side Section Flap (CABRIO Models)
        • Tools
        • Preliminary Work
        • Removing Rear Side Section Flap
          • Removing Rear Side Panel Flap
        • Installing Rear Side Section Flap
        • Subsequent Work
      • WM 614355 Replacing Tension Rope (CABRIO Models)
        • Tools
        • Technical values
        • Preliminary Work
        • Removing Tension Rope
        • Installing Tension Rope
        • Subsequent Work
      • WM 615419 Removing And Installing Rear Cover (Crossbar) (Speedster)
        • Tools
        • Technical Values
        • Preliminary Work
          • Notes
          • Loosening Seat Belt And Fitting
        • Tools And Materials
        • Removing Rear Cover
        • Installing Rear Cover
        • Adjusting Rear Cover
        • Subsequent Work
          • Securing Seat Belt And Fitting
      • WM 615515 Adjusting Linkage For Rear Cover (Crossbar) (Speedster)
        • Technical Values
        • Adjusting Linkage For Rear Cover
      • WM 615519 Removing And Installing Linkage For Rear Cover (Crossbar) (Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Linkage For Rear Cover
        • Installing Linkage For Rear Cover
          • Pre-Fitting Linkage For Rear Cover
          • Installing Linkage For Rear Cover
        • Adjusting Linkage For Rear Cover
        • Subsequent Work
      • WM 616019 Removing And Installing Switch For Roof (CABRIO Models)
        • Preliminary Work
        • Removing Switch For Roof
        • Installing Switch For Roof
        • Subsequent Work
      • WM 616419 Removing And Installing Microswitch For Roof (CABRIO Models)
        • Preliminary Work
        • Removing Microswitch For Roof
        • Installing Microswitch For Roof
        • Subsequent Work
      • WM 616619 Removing And Installing Potentiometer (CABRIO Models)
        • Tools
        • Preliminary Work
          • Preliminary Work For Potentiometer
        • Removing Potentiometer
        • Installing Potentiometer
        • Subsequent Work
          • Subsequent Work On Potentiometer
      • WM 617019 Removing And Installing Convertible-Top Compartment Lid Drive (CABRIO Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Motor For Convertible-Top Compartment Lid Drive
        • Installing Motor For Convertible-Top Compartment Lid Drive
        • Subsequent Work
      • WM 617219 Removing And Installing Convertible-Top Compartment Lid Drive Gear (CABRIO Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Convertible-Top Compartment Lid Drive Gear
          • Disengaging Cable For Locking Hook
          • Removing Convertible-Top Compartment Lid Drive Gear
        • Installing Convertible-Top Compartment Lid Drive Gear
          • Notes
          • Engaging Cable For Locking Hook
        • Subsequent Work
      • WM 617419 Removing And Installing Cable For Locking Hook (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Cable For Locking Hook
          • Disengaging Cable For Locking Hook
          • Removing Cable For Locking Hook
        • Installing Cable For Locking Hook
          • Notes
          • Engaging Cable For Locking Hook
        • Subsequent Work
      • WM 618119 Removing And Installing Microswitch For Convertible-Top Compartment Lid Drive (CARR. CABRIO, CARR. S CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Preliminary Work
        • Removing Microswitch For Convertible-Top Compartment Lid Drive
        • Installing Microswitch For Convertible-Top Compartment Lid Drive
        • Subsequent Work
      • WM 618419 Removing And Installing Hydraulic Pump (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Removing Hydraulic Pump
        • Installing Hydraulic Pump
        • General Information On The Hydraulic System
          • Filling The Hydraulic System
          • Bleeding The Hydraulic System
          • Checking Hydraulic Oil Level
          • Access For Opening And Closing The Hydraulic Valve (Emergency Operation)
        • Subsequent work
      • WM 618619 Removing And Installing Hydraulic Cylinder (CABRIO Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Hydraulic Cylinder
        • Installing Hydraulic Cylinder
        • Subsequent Work
      • WM 619019 Removing And Installing Hood Compartment Lid (Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Hood Compartment Lid
          • Removing Convertible Top Compartment Lid
        • Subsequent Work
      • WM 619019 Removing And Installing Convertible-Top Compartment Lid (Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Convertible-Top Compartment Lid
          • Releasing Wire Harness For Additional Brake Light
          • Removing Convertible-Top Compartment Lid
        • Installing Convertible-Top Compartment Lid
          • Notes
          • Locking Wire Harness For Additional Brake Light
        • Adjusting Convertible-Top Compartment Lid
        • Subsequent Work
      • WM 619037 Disassembling And Assembling Hood Compartment Lid (CABRIO Models)
        • Technical Values
        • Preliminary Work
        • Disassembling Hood Compartment Lid
        • Assembling Hood Compartment Lid
        • Subsequent Work
      • WM 619119 Removing And Installing Additional Flap (CABRIO Models)
        • Preliminary Work
        • Removing Additional Flap
        • Installing Additional Flap
      • WM 619215 Adjusting Hinge For Hood Compartment Lid (Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Adjusting Hinge For Hood Compartment Lid
        • Subsequent Work
      • WM 619219 Removing And Installing Hinge For Hood Compartment Lid (Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Hinge For Hood Compartment Lid
        • Installing Hinge For Hood Compartment Lid
        • Subsequent Work
      • WM 619219 Removing And Installing Hinge For Convertible-Top Compartment Lid (Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Pneumatic Spring At The Hinge Side
        • Removing Hinge For Convertible-Top Compartment Lid
        • Installing Hinge For Convertible-Top Compartment Lid
        • Adjusting Hinge For Convertible-Top Compartment Lid
        • Subsequent Work
          • Overview
          • Installing Pneumatic Spring At The Hinge Side
      • WM 619319 Removing And Installing Seal For Convertible-Top Compartment Lid (CABRIO Models)
        • Removing Seal For Convertible-Top Compartment Lid
          • Overview
          • Installing Seal For Convertible-Top Compartment Lid
      • WM 619619 Removing And Installing Convertible Top Control Unit (CABRIO Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Convertible Top Control Unit
          • Removing Control Unit For Convertible Top
        • Installing Convertible Top Control Unit
          • Installing Control Unit For Hood
        • Subsequent Work
        • Programming Convertible Top Control Unit
          • Reading Out And Writing Values For Convertible Top Control Unit
        • Coding Convertible Top Control Unit
          • Coding Control Unit For Convertible Top
        • Calibrating The Convertible Top
  • Windows
    • 64 - Glazing, Window Control -- CARRERA (997)
      • WM 6400IN General Information On Installing And Removing Car Windows (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Tools
        • Removing Glass With Cutting Wire Separator
          • Danger Of Injury When Working On Vehicle Windows
          • Material Damage When Removing The Glass From Car Windows
          • Removing Glass With Cutting Device - Wire Separator
          • Applying Protective Film To The Dashboard
          • Guiding Cutting Thread Into The Passenger Compartment
          • Guiding Cutting Thread Into The Gap In The Glass
          • Attaching Cutting Thread To The Body
          • Attaching Cutting Thread To The Spooling Device
          • Installing Spooling Device And Deflection Rollers On The Glass
          • Separating Glass As Far As P1
          • Repositioning Spooling Device
          • Separating Glass As Far As P2
          • Separating Glass As Far As P3
          • Separating Glass As Far As P4
          • Separating Glass As Far As P5
          • Cutting Power When Removing Glass With Cutting Thread
      • WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Removing Windscreen
          • Removing Spacer Blocks
          • Removing Windscreen
        • Preparing Window Aperture For Installation
          • Removing Adhesive From The Body
        • Preparing Windscreen For Installation
          • Removing Windscreen Seal
          • Removing Adhesive From The Windscreen
          • Fitting Windscreen Seal
          • Marking The Bonding Area
          • Activating The Bonding Section Of The Windscreen
          • Priming The Windscreen
        • Installing Windscreen
          • Preliminary Work Before Windscreen Installation
          • Fitting Windscreen Into The Body
          • Preparing 2-Component Adhesive For Processing
          • Applying Adhesive To The Windscreen
          • Pulling Off Protective Film
          • Inserting Windscreen Into The Body
          • Cleaning Fields Of Vision
        • Subsequent Work
      • WM 6412IN Processing Of PORSCHE 2-Component Window Bonding Agents WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Pre-Treatment Of Bonding Surfaces
          • Pre-Treating Adhesive Flanges On Vehicle Windows
          • Pre-Treating Bonded Flanges On The Vehicle Body
        • Handling Processing Device
          • Double Cartridge Press
      • WM 641623 Installing Seal For Windscreen WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Installing Seal For Windscreen
          • Fitting Seal For Windscreen
      • WM 642119 Removing And Installing Closing Aid (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Closing Aid
        • Removing Closing Aid
        • Installing Closing Aid
        • Subsequent Work
          • Subsequent Work For Closing Aid
      • WM 643719 Removing And Installing Microswitch For Window Opening Controls (Except 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Microswitch For Window Opening Controls
          • Unclipping Electric Wire For Micro Switches
          • Removing Microswitch For Window Opening Controls
        • Installing Microswitch For Window Opening Controls
          • Notes
          • Clipping In The Electric Wire For Micro Switches
        • Subsequent Work
      • WM 644015 Adjusting Front Door Window (Except 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Adjusting Front Door Window
        • Subsequent Work
      • WM 644019 Removing And Installing Front Door Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Door Window
        • Installing Front Door Window
          • Notes
          • Securing Front Door Window
          • Inserting Door Trim Panel
          • Standardizing The Power Windows
          • Blockage Detection Function
          • Precondition For Operation Of The Power Windows
        • Subsequent Work
      • WM 644049 Reworking (Coating) Front Door Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • General Warning Notes
          • Warning Note On Hydrophobic Window
          • Checking Front Door Window
        • Preliminary Work
          • Preparing Components For Processing
          • Cleaning Window Surfaces
          • Reworking (Coating) Front Door Window
      • WM 644819 Removing And Installing The Front Window Shaft Seal (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Removing The Front Window Shaft Seal
        • Installing The Front Window Shaft Seal
      • WM 645219 Removing And Installing Front Power Windows (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Power Windows
        • Installing Front Power Windows
          • Adjusting The Lower Stop Of The Power Window Unit
          • Installing Front Power Windows
        • Subsequent Work
      • WM 645419 Removing And Installing Power Window Motor (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Power Window Motor
        • Removing Power Window Motor
        • Installing Power Window Motor
        • Subsequent Work
          • Subsequent Work For Window Power Motor
        • Programming Power Window Motor (Door Control Unit)
          • Reading From And Writing To The Power Windows Motor (Door Control Unit)
        • Coding Power Window Motor (Door Control Unit)
          • Coding The Power Windows Motor (Door Control Unit)
      • WM 645819 Removing And Installing Switch For Power Windows (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Preliminary Work
        • Removing Switch For Power Windows
        • Installing Switch For Power Windows
        • Subsequent Work
      • WM 646119 Removing And Installing Rear Power Window Motor (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Rear Power Window Motor
        • Installing Rear Power Window Motor
        • Subsequent Work
      • WM 647119 Removing And Installing Rear Window Lifter (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Rear Window Lifter
          • Loosening Hydraulic Cylinder
          • Removing Rear Window Lifter
        • Installing Rear Window Lifter
          • Notes
          • Installing Hydraulic Cylinder
        • Adjusting Rear Power Windows Mechanism
        • Additional Instructions For Adjusting Or Replacing The Rear Window Lifter
        • Subsequent Work
      • WM 647119 Removing And Installing Rear Power Windows Mechanism (911 Speedster)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Rear Power Windows Mechanism
        • Installing Rear Power Windows Mechanism
        • Adjusting Rear Power Windows Mechanism
        • Additional Instructions For Adjusting Or Replacing The Rear Power Windows Mechanism
          • Additional Instructions For Adjusting Or Replacing The Rear Window Lifter
        • Subsequent Work
      • WM 647519 Removing And Installing Rear Side Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rear Side Window
          • Removing Side Window
        • Installing Rear Side Window
          • Installing Side Window
        • Subsequent Work
      • WM 647619 Removing And Installing Side Window Seal (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
        • Preliminary Work
        • Removing Side Window Seal
          • Notes
          • Loosening Sound Absorber
          • Removing Seal For Roof Frame
        • Installing Side Window Seal
          • Installing Seal For Roof Frame
          • Securing Sound Absorber
          • Installing Side Window Seal
        • Subsequent Work
      • WM 647619 Removing And Installing Inner Side-Window Seal (911 TARGA 4, 911 TARGA 4S)
        • Preliminary Work
        • Removing Inner Side-Window Seal
        • Installing Inner Side-Window Seal
        • Subsequent Work
      • WM 647619 Removing And Installing Outer Side-Window Seal (Upper Part) (911 TARGA 4, 911 TARGA 4S)
        • Preliminary Work
        • Subsequent Work
      • WM 647619 Removing And Installing Outer Side-Window Seal (Lower Part) (911 TARGA 4, 911 TARGA 4S)
        • Preliminary Work
        • Subsequent Work
      • WM 648601 Checking Function Of Heated Rear Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Checking Function Of Heated Rear Window
          • Check With The Temperature Probe
      • WM 648615 Adjusting Rear Window Cover (911 TARGA 4, 911 TARGA 4S)
        • Tools
        • Technical Values
        • Adjusting Rear Window Cover
      • WM 648619 Removing And Installing Rear Window Cover (911 TARGA 4, 911 TARGA 4S)
        • Technical Values
        • Preliminary Work
        • Removing Rear Window Cover
        • Installing Rear Window Cover
        • Subsequent Work
      • WM 648619 Removing And Installing Rear Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Removing Rear Window
          • Overview
          • Preparing The Rear Window (Hardtop) For Removal
          • Removing Rear Window
        • Preparing Window Aperture For Installation
          • Removing Adhesive From The Body
          • Cleaning And Priming Paint Damage Or Newly Built-Up Paint Areas In The Window Aperture Of The Body
          • Removing Adhesive On The Hardtop Body
          • Cleaning And Priming Paint Damage Or Newly Built-Up Paint Areas In The Window Aperture Of The Hardtop Body
        • Preparing Rear Window For Installation
          • Removing Seal For Rear Window
          • Removing Adhesive From The Rear Window
          • Fitting Seal For Rear Window
          • Applying Activator To The Bonding Section Of The Rear Window
          • Fitting Cover Section
        • Installing Rear Window
          • Aligning Rear Window
          • Preparing 2-Component Adhesive For Processing
          • Applying Adhesive On The Rear Window
          • Pulling Off Protective Film
          • Inserting Rear Window Into The Body
          • Cleaning Fields Of Vision
          • Inserting Rear Window Into The Hardtop Body
          • Completing The Rear Window (Hardtop) After Installation
        • Subsequent Work
        • Technical Values
      • WM 649023 Installing Seal For Rear Window (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Installing Seal For Rear Window
          • Fitting Seal For Rear Window
      • WM 649519 Removing And Installing Rear Pneumatic Spring (911 TARGA 4, 911 TARGA 4S)
        • Removing Rear Pneumatic Spring
          • Removing Rear Gas Spring At The Lid
          • Removing Rear Gas Spring At The Body
        • Installing Rear Pneumatic Spring
          • Installing Rear Gas Spring At The Body
          • Installing Rear Gas Spring At The Lid
        • Checking Rear Gas Spring
          • Checking Operation Of Rear Gas Springs
• Brakes
  • Anti-Lock Brakes
    • 45 - Anti Lock Brake (Abs) -- CARRERA (997)
      • WM 451119 Removing And Installing Front Speed Sensor (All Models)
        • Removing front speed sensor
        • Installing front speed sensor
      • WM 451519 Removing And Installing Rear Speed Sensor (All Models)
        • Removing rear speed sensor
        • Installing rear speed sensor
      • WM 453019 Removing And Installing Hydraulic Unit (All Models)
        • Tools
        • Information
        • Preliminary work
        • Removing hydraulic unit
        • Installing hydraulic unit
        • Subsequent work
      • WM 455919 Removing And Installing Rotation-Rate Sensor For PSM (All Models)
        • Information
        • Removing rotation-rate sensor
        • Installing rotation-rate sensor
        • Subsequent work
      • WM 456005 Initialising And Calibrating Steering-Angle Sensor (All Models)
        • Tools
        • General warning notes
        • Checking steering-angle sensor
          • Initialise steering-angle sensor
        • Adjusting steering-angle sensor
          • Calibrating steering-angle sensor
      • WM 456019 Removing And Installing Steering-Angle Sensor For PSM
        • Technical values
        • Information
        • Preliminary work
        • Removing
        • Replacing
        • Installing
        • Subsequent work
  • Mechanical - Hydraulic
    • 46 - Brakes - Brake Mechanics -- CARRERA (997)
      • WM 4600TW Technical Data/Brake Wear Limit - 911 Turbo/Gt2/Gt2 RS/Gt3/Gt3 RS (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Technical Data - 911 Turbo/GT3/GT3 RS
        • Test Values/Wear Limits - 911 Turbo/GT3/GT3 RS
        • Information On Machining Cast-Iron Brake Discs
        • Technical Data For 911 Turbo/GT3/GT3 RS - PCCB Brakes (Option)
        • Test Values/Wear Limits For 911 Turbo/GT3/GT3 RS - PCCB Brakes (Option)
      • WM 4600TW Technical Data/Brake Wear Limit - 911 CARRERA As Of My 2009 (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Technical Data/Brake Wear Limit
          • Technical Data - C2/C4 As Of MY 2009
          • Test Values/Wear Limits - C2/C4 As Of MY 2009
          • Information On Machining Cast-Iron Brake Discs
          • Technical Data For C2/C2S And C4/C4S - PCCB Brakes (Option)
          • Test Values/Wear Limits For C2/C2S And C4/C4S - PCCB Brakes (Option)
      • WM 4600TW Tightening Torques For Brake Mechanism (All Models)
        • Technical Values
          • Overview
          • Tightening Torques For Brake Mechanism
        • Tightening Torques For Brake Pedal/Pedal Bearing Axle
      • WM 4600IN Brake Disc Measurement Sheet (All Models)
        • Information
          • Brake Disc Measurement Sheet
      • WM 460519 Removing And Installing Brake Pedal (All Models)
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Clutch Pedal And Brake Pedal
          • Removing Clutch Pedal
          • Removing Brake Pedal
        • Installing Brake Pedal And Clutch Pedal
          • Installing Brake Pedal
          • Installing Clutch Pedal
        • Subsequent Work
      • WM 461624 Installing Air Guide (Brake Air Ducts) For Rear Brake Discs (Gt3, Gt3 RS, Gt2 RS)
        • Information
          • Notes
          • Installing Air Guide (Brake Air Duct) For Rear Brake Discs
      • WM 463420 Removing And Installing Front PCCB Brake Pads (All Models)
        • Tools
        • Preliminary Work
        • Removing Front Brake Pads - PCCB Brakes
        • Installing Front Brake Pads - PCCB Brakes
          • Notes
          • Bedding In The Brake Pads
        • Subsequent Work
      • WM 463520 Removing And Installing Rear PCCB Brake Pads (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Tools
        • Preliminary Work
        • Removing Rear Brake Pads - PCCB Brakes
        • Installing Rear Brake Pads - PCCB Brakes
          • Notes
          • Bedding In The Brake Pads
          • Subsequent Work
      • WM 463602 Checking Thickness Of Front Brake Pads (All Models)
        • Information On Checking Brake Pads
          • Procedure During Intermediate Maintenance
          • Procedure During Maintenance
        • Checking Thickness Of Front Brake Pads
      • WM 463602 Checking Thickness Of Front Brake Pads (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2 RS, Gt3 RS 4.0)
        • Preliminary Work
        • General warning notes
        • Checking
        • Subsequent work
      • WM 463620 Removing And Installing Front Brake Pads - Brake CALLIPER With Two Bars (CARR. Coupe, CARR. CABRIO, CARR. 4 Coupe, TARGA 4, CARR. 4 CABRIO)
        • Tools
        • Preliminary Work
        • Removing And Installing Front Brake Pads
          • Notes
          • Installing Front Brake Pads - Brake Calliper With Two Bars
          • Bedding In The Brake Pads
        • Subsequent Work
      • WM 463620 Removing And Installing Front Brake Pads - 6-Piston Fixed CALLIPER ("Sport Classic", Turbo Coupe, Turbo S Coupe, Turbo S CABRIO "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", Speedster, Gt3, Gt3 RS, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing And Installing Front Brake Pads - 6-Piston Fixed Calliper
          • Removing Front Brake Pads - 6-Piston Fixed Calliper
          • Installing Front Brake Pads - 6-Piston Fixed Calliper
          • Bedding In The Brake Pads
        • Subsequent Work
      • WM 463620 Removing And Installing Front Brake Pads (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt3 RS)
        • Tools
        • Preliminary Work
        • Removing Front Brake Pads
          • Removing Front Brake Pads - 6-Piston Calliper
        • Installing Front Brake Pads
          • Installing Front Brake Pads - 6-Piston Calliper
          • Bedding In The Brake Pads
        • Subsequent Work
      • WM 463620 Removing And Installing Front Disc Brake Pads - 4-Piston Fixed CALLIPER (Without Bars) (CARR. S Coupe, CARR. GTS Coupe, CARR. S CABRIO, CARR. GTS Coupe, CARR. 4S Coupe, CARRERA 4 GTS, TARGA 4S, CARR. 4S CABRIO, CARRERA 4 GTS CABRIO)
        • Tools
        • Preliminary Work
        • Removing And Installing Front Disc Brake Pads - 4-Piston Fixed Calliper (Without Bars)
          • Removing Front Disc Brake Pads
          • Installing Front Disc Brake Pads
          • Bedding In The Brake Pads
        • Subsequent work
      • WM 463802 Checking Thickness Of Rear Brake Pads (Except Gt2 RS, Gt3 RS 4.0)
        • Information On Checking Brake Pads
        • Checking Thickness Of Rear Brake Pads
      • WM 463820 Removing And Installing Rear Brake Pads (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", Gt3, Gt3 RS, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing Rear Disc Brake Pads
          • Removing Rear Brake Pads
        • Installing Rear Disc Brake Pads
          • Installing Rear Brake Pads - 911 Turbo
          • Bedding In The Brake Pads
        • Subsequent Work
      • WM 465002 Checking Front Brake Discs - Wear Assessment (Except Gt2, Gt2 RS, Gt3 RS 4.0)
        • Brake Disc Wear Assessment - General
        • Checking Grey Cast-Iron Brake Discs - Evaluating Cracks
        • Checking Grey Cast-Iron Brake Discs - Minimum Thickness
        • Bedding In The Brake Pads And Brake Discs
      • WM 465004 Measuring Front Brake Discs (All Models)
        • Tools
        • Measuring Brake Discs/Wheel Hubs
      • WM 465102 Checking Front PCCB Brake Discs (Wear Assessment) (All Models)
        • Checking Information On PCCB Brake Discs
          • PCCB Brake Disc Versions
          • Basic Information
          • General Information On Replacing Worn PCCB Brake Discs
          • Replacing Brake Discs (Notes/Decision-Making Aid)
          • Cracks (Stress-Relief Microstructure) In The Brake Disc Friction Surface
          • Note Concerning Bores (Perforations) In The Brake Disc Friction Surface
          • Coating On The PCCB Brake Discs (Potential Causes)
          • Note On Bedding In The New Brake Pads
        • Checking PCCB Brake Discs (Wear Assessment)
          • Visual Inspection Of The Surfaces Of The Brake Disc Friction Surfaces (Indication Of Wear)
          • PCCB Brake Disc Wear Appearance
          • Evaluating Surface Roughness (Sr) (max. 80 Micrometer Permitted)
          • Checking Brake Discs For Minimum Thickness
          • Checking Brake Discs For Edge Damage
      • WM 465119 Removing And Installing Front PCCB Brake Disc (All Models)
        • Tools
        • Preliminary Work
        • General Warning Notes
        • Removing Front Brake Disc
        • Installing Front Brake Disc
        • Subsequent Work
          • Notes
          • Bedding In The Brake Pads
      • WM 465302 Checking Rear Brake Discs (Wear Assessment) (Except Gt2, Gt2 RS, Gt3 RS 4.0)
        • Brake Disc Wear Assessment - General
        • Checking Grey Cast-Iron Brake Discs - Evaluating Cracks
        • Checking Grey Cast-Iron Brake Discs - Minimum Thickness
        • Bedding In The Brake Pads And Brake Discs
      • WM 465304 Measuring Rear Brake Discs (All Models)
        • Measuring Rear Brake Discs/Wheel Hubs
      • WM 465019 Removing And Installing Front Brake Disc (Except Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • General Warning Notes
        • Removing Front Brake Disc
        • Installing Front Brake Disc
          • Notes
          • Bedding In The Brake Pads
        • Subsequent Work
      • WM 465319 Removing And Installing Rear Brake Disc (Except Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • General Warning Notes
        • Removing Rear Brake Disc
        • Installing Rear Brake Disc
          • Notes
          • Bedding In The Brake Pads
        • Subsequent Work
      • WM 465402 Checking Rear PCCB Brake Discs (Wear Assessment) (All Models)
        • Checking Information On PCCB Brake Discs
          • PCCB Brake Disc Versions
          • Basic Information
          • General Information On Replacing Worn PCCB Brake Discs
          • Replacing Brake Discs (Notes/Decision-Making Aid)
          • Cracks (Stress-Relief Microstructure) In The Brake Disc Friction Surface
          • Note Concerning Bores (Perforations) In The Brake Disc Friction Surface
          • Coating On The PCCB Brake Discs (Potential Causes)
          • Note On Bedding In The New Brake Pads
        • Checking PCCB Brake Discs (Wear Assessment)
          • Visual Inspection Of The Surfaces Of The Brake Disc Friction Surfaces (Indication Of Wear)
          • PCCB Brake Disc Wear Appearance
          • Evaluating Surface Roughness (Sr) (Max. 80 Micrometer Permitted)
          • Checking Brake Discs For Minimum Thickness
          • Checking Brake Discs For Edge Damage
      • WM 465419 Removing And Installing Rear PCCB Brake Disc (All Models)
        • Tools
        • Preliminary Work
        • General Warning Notes
        • Removing Rear Brake Disc
        • Installing Rear Brake Disc
        • Subsequent Work
          • Notes
          • Bedding In The Brake Pads
      • WM 466119 Removing And Installing Parking-Brake Lever (All Models)
        • Preliminary Work For Removing Parking-Brake Lever
        • Removing Parking-Brake Lever
        • Installing Parking-Brake Lever
        • Subsequent Work After Installing Parking-Brake Lever
      • WM 468316 Adjusting The Parking-Brake Shoes (All Models)
        • Adjusting The Parking-Brake Shoes
        • Checking Free Play Of Parking-Brake Lever
        • Information
      • WM 468320 Removing And Installing Brake Shoes (All Models)
        • Preliminary Work
        • Removing
        • Installing
        • Subsequent Work
    • 47 - Brakes - Hydraulic Brake System, Regulator -- CARRERA (997)
      • WM 4700TW Tightening Torques For Brake Hydraulics (All Models)
        • Technical values
          • Overview
          • Brake pressure line
          • Master brake cylinder/brake booster
          • Hydraulic unit
          • Brake calliper
      • WM 470107 Bleeding The Brake System(CARR. Coupe, CARR. S Coupe, Sport Classic, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Notes
        • Bleeding the brake system
          • Procedure for bleeding
      • WM 470801 Checking Brake Fluid Level (All Models)
        • Checking brake fluid level
      • WM 470855 Replacing Brake Fluid (All Models)
        • Technical values
        • Replacing brake fluid
          • Changing brake fluid
      • WM 471519 Removing And Installing Brake Master Cylinder (All Models)
        • Information
        • Preliminary work
        • Removing brake master cylinder
        • Installing brake master cylinder
        • Subsequent work
      • WM 474119 Removing And Installing Rear Brake CALLIPER (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Preliminary work
        • Removing rear brake calliper (standard brake system and PCCB)
        • Installing rear brake calliper (standard brake system and PCCB)
        • Bedding in the brake pads - standard brake system
        • Bedding in the brake pads - PCCB
        • Subsequent work
      • WM 477019 Removing And Installing Brake Booster(All Models)
        • Technical values
        • Information
        • Preliminary work
        • Removing brake booster
        • Installing brake booster
        • Subsequent work
      • WM 477619 Removing And Installing Vacuum Pump (CARR. Coupe, CARR. S Coupe, Sport Classic, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Speedster)
        • Information
          • Notes
          • Vacuum pump up to 2008 model (tandem pump)
          • Vacuum pump as of 2009 model (solo pump)
        • Removing and installing vacuum pump
          • Removing vacuum pump - as of 2009 model
          • Installing vacuum pump - as of 2009 model
      • WM 477755 Replacing Vacuum Line For Brake Booster (Section At Engine) (Turbo Coupe, Turbo CABRIO)
        • Tools
        • Information
        • Preliminary work
        • Component overview
        • Removing vacuum line
        • Installing vacuum line
        • Subsequent work
  • Traction Control
    • 45 - Anti Lock Brake (Abs) -- CARRERA (997)
      • WM 451119 Removing And Installing Front Speed Sensor (All Models)
        • Removing front speed sensor
        • Installing front speed sensor
      • WM 451519 Removing And Installing Rear Speed Sensor (All Models)
        • Removing rear speed sensor
        • Installing rear speed sensor
      • WM 453019 Removing And Installing Hydraulic Unit (All Models)
        • Tools
        • Information
        • Preliminary work
        • Removing hydraulic unit
        • Installing hydraulic unit
        • Subsequent work
      • WM 455919 Removing And Installing Rotation-Rate Sensor For PSM (All Models)
        • Information
        • Removing rotation-rate sensor
        • Installing rotation-rate sensor
        • Subsequent work
      • WM 456005 Initialising And Calibrating Steering-Angle Sensor (All Models)
        • Tools
        • General warning notes
        • Checking steering-angle sensor
          • Initialise steering-angle sensor
        • Adjusting steering-angle sensor
          • Calibrating steering-angle sensor
      • WM 456019 Removing And Installing Steering-Angle Sensor For PSM
        • Technical values
        • Information
        • Preliminary work
        • Removing
        • Replacing
        • Installing
        • Subsequent work
• Collision
  • Body Panels
    • 50 - Body Front - CARRERA (997)
      • WM 5000IN Change Identification Data Plate (All Models)
        • Change Identification Data Plate
          • Installation Location Of Identification Data Plate On The Vehicle
          • Identification Data Plate Row
          • Identification Data Plate USA
          • Identification Data Plate Canada
      • WM 5000IN Corrosion Protection Measures During Repairs (All Models)
        • Measures For Maintaining Long-Term Body Protection
        • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
          • Porsche Long-Life Guarantee Conditions
      • WM 5000IN Diagram - Body Gap Dimensions (All Models)
        • Tools
        • Technical Values
        • Diagram - Body Front Gap Dimensions
          • Gap dimensions, body front
        • Diagram - Body Centre Gap Dimensions
          • Gap Dimensions, Body Centre
      • WM 5000IN Diagram - Keys To Symbols For Welding Work (All Models)
        • Diagram - Keys To Symbols For Welding Work
          • Resistance Spot Welding
          • Inert-Gas Arc Welding (MAG Procedure)
          • Gas Welding
      • WM 5000IN Diagram Of Body Bonding Points And Sealing Elements (All Models)
        • Diagram Of Body Bonding Points And Sealing Elements
      • WM 5000IN Diagram: Plug Plan (All Models)
        • Diagram: Plug Plan
          • Top Of Front Of Vehicle
          • Bottom Of Front Of Vehicle
          • Side Body Front Section
          • Bottom Of Lower Side Member And Floor
          • Top Of Lower Side Member And Floor
          • Bottom Of Rear End
          • Top Of Rear End
          • Side Of Rear End
      • WM 5000IN General Information And Notes On Quality (All Models)
        • Measures For Maintaining Long-Term Body Protection
          • Notes
          • Prerequisite For Maintaining The Long-Life Guarantee
        • Electronic Control Modules
          • Notes
          • Battery Trickle Charge
          • Protection Against Overvoltage When Performing Welding Work
          • Replacing Control Modules
      • WM 5000IN Processing Structural Body Adhesive (All Models)
        • Tools
        • Technical Values
        • Tools And Materials
          • Processing Structural Body Adhesive
        • Information On The Use Of Structural Adhesives In Vehicle Construction
          • General
          • Separating Body Components
          • Welding In Body Components
        • PROCESSING Adhesives
          • Preparing Bonding Surfaces
        • Handling Primer
          • General
          • 2-Component SIP
        • Handling Processing Devices
          • Applicator Gun
      • WM 5000AW Safety Notes (All Models)
        • Safety Instructions For Raising Vehicles
          • Danger Of Injury When Raising Vehicles
          • Damage When Raising Vehicles
        • Safety Instructions For Welding
          • Danger Of Injury When Welding
          • Safety Instructions For Flying Sparks During Grinding And Welding Work
          • Safety Instructions For Fuel Tank
          • Safety Instructions For Air Conditioning
        • Safety Instructions For Adhesive Bonding
          • Danger Of Poisoning And Injury When Adhesive Bonding
          • Safety Instructions For Teromix-6700 Two-Component Adhesive
        • Safety Instructions For Installation Work
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Safety Instructions For Airbag System
          • Safety Instructions For Door
        • Safety Instructions For Corrosion Protection
          • Safety Instructions For Plug Location Plan (Body)
          • Safety Instructions For Water Drains (Body)
          • Safety Instruction For Deformation Element
          • Possible Separation Points On Inner Side Member
          • Baked Hardening
      • WM 5000IN Seam Seals (All Models)
        • Accessories
          • Note On Seam Seals
          • Door
          • Rear Lid
        • Unpainted BODYSHELL
          • Top Of Front Of Vehicle
          • Top Of Front Of Vehicle, Front
          • Top Of Front Of Vehicle, (Radiator Tank)
          • Front Of Vehicle And Inside A-Pillars
          • Side Of Front Of Vehicle
          • Top Of Inside Front Of Vehicle And Floor
          • Top Of Lower Side Member And Floor
          • Wheel Housing And Upper Rear Side Section
          • Bottom Of Front Of Vehicle
          • Bottom Of Lower Side Member And Floor
          • Top Of Rear End
          • Bottom Of Rear End
          • Side Of Rear End
          • Roof
      • WM 5000IN Tools And Metalworking Tools For Body Repairs (All Models)
        • Tools
        • Straightening Systems
        • Metalworking Tools
          • Electrical Equipment
          • Mechanical Equipment
          • Compressed-Air Equipment
          • Welding Equipment
      • WM 5000IN UNDERSEALING (All Models)
        • Tools
          • Notes
          • Tools And Materials
            • Tools
            • Materials
        • Diagram: UNDERSEALING
          • Bottom Of Front Of Vehicle, Layout Plan
      • WM 5000IN Using 2K Acoustic Filler Foam "AFS-VARIO" On The Body (All Models)
        • Using 2K Acoustic Filler Foam "AFS-VARIO" On The Body
          • Description
          • Applications
          • Processing
      • WM 5000IN Vehicle Identification Number (All Models)
        • Tools
        • Re-Imprinting New Vehicle Identification Number
          • Vehicle Identification Number
          • Spacer For Replacing The Vehicle Identification Number
          • Re-Imprinting New Vehicle Identification Number
      • WM 5000IN Water Drainage Diagram (All Models)
        • Water Drainage Diagram
      • WM 5000IN Work Sequence For Accident Repair (All Models)
        • Work Sequence For Accident Repair
          • Procedure For Accident Repairs
          • Repair
          • Replacement
      • WM 5000IN Work Sequence For Determining Extent Of Damage To Vehicles Involved In An Accident (All Models)
        • Tools
        • Work Sequence For Determining Extent Of Damage To Vehicles Involved In An Accident
          • Instructions
          • Procedure For Damage Diagnosis
          • Identifiable Deformations On The Body Structure
          • No Identifiable Deformations On The Body Structure
      • WM 501055 Replacing Front Closing Panel (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
          • Preliminary Work For Body Repairs With Straightening Bench
          • Preliminary Work For Body Repairs
        • Removing Front Closing Panel
        • Preparing Connection Areas Of The Body For Installing The Front Closing Panel
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Front Closing Panel
        • Fitting Front Closing Panel And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Front Closing Panel And Preparing For Installation
        • Installing Front Closing Panel
          • Danger Of Injury While Welding
          • Installing Front Closing Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 501455 Replacing Front Panel (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Straightening Bench
          • Notes
          • Preliminary Work For Body Repairs
        • Removing Front Panel
          • Removing Body Front Section
        • Preparing Connection Areas Of The Body For Installation Of The Front Panel
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Front Panel
        • Fitting Front Panel And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Front Panel And Preparing For Installation
        • Installing Front Panel
          • Danger Of Injury While Welding
          • Installing Front Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 502055 Replacing Front Floor Panel (All Models)
        • Tools
        • Technical Values
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
          • Preliminary Work For Body Repairs With Straightening Bench
          • Preliminary Work For Body Repairs
        • Removing Spare-Wheel Well Insert
        • Removing Floor Front Section
        • Preparing Connection Areas Of The Body For Installing Front Floor Panel
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Floor Front Section
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Adjusting Floor Front Section And Preparing For Installation
        • Installing Front Floor Panel
          • Danger Of Injury While Welding
          • Installing Floor Front Section
        • Installing Spare-Wheel Well Insert
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 505519 Removing And Installing Wing (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Wing
          • Removing Fuel Tank Cap
          • Releasing Tank Filler Neck
          • Releasing Bottom Of Wing
          • Releasing Top Of Wing
          • Removing Retaining Strip
          • Removing Protective Film
          • Releasing Wing From A-Pillar
          • Removing Masking Panel
        • Installing Wing
          • Installing Masking Panel
          • Fastening Wing To A-Pillar
          • Fastening Top Of Wing
          • Fastening Bottom Of Wing
          • Sticking In The Protective Film
          • Installing Retaining Strip
          • Fastening Tank Filler Neck
          • Installing Fuel Tank Cap
        • Subsequent Work
      • WM 505619 Removing And Installing Front Wheel Housing Liner (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Front Wheel Housing Liner
          • Removing Front Wheel Housing Liner - Rear Section
          • Remove Front Wheel Housing Liner - Front Section
        • Installing Front Wheel Housing Liner
          • Install Front Wheel Housing Liner - Front Section
          • Installing Front Wheel Housing Liner - Rear Section
        • Subsequent Work
      • WM 507449 Eliminating Noise Symptoms - Reworking Front Wheel Housing (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • General Information
          • Symptoms
          • Causes And Remedial Action
        • Preliminary Work
        • Reworking Front Wheel Housing
        • Subsequent Work
        • Working Times
      • WM 507455 Replacing Front Wheel Housing (All Models)
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Front Wheel Housing
          • Removing Reinforcement For Front Wheel Housing
          • Removing Front Wheel Housing
        • Preparing Connection Areas Of Body For Installation Of Front Wheel Housing
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Front Wheel Housing
        • Fitting Front Wheel Housing And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Front Wheel Housing And Preparing For Installation
          • Preparing Reinforcement For Front Wheel Housing For Installation
        • Installing Front Wheel Housing
          • Danger Of Injury While Welding
          • Installing Front Wheel Housing
          • Installing Reinforcement For Front Wheel Housing
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 507455 Replacing Front Wheel Housing (Section) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Front Wheel Housing (Section)
        • Preparing Connection Areas Of The Body For Installing The Front Wheel Housing (Section)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Front Wheel Housing (Section)
        • Fitting In Front Wheel Housing And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Front Wheel Housing And Preparing For Installation
        • Installing Front Wheel Housing (Section)
          • Danger Of Injury While Welding
          • Installing Front Wheel Housing (Section)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 507755 Replacing Outer Front Side Member (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Outer Front Side Member
        • Preparing Connection Areas Of Body For Installation Of Outer Front Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Outer Front Side Member
        • Fitting Outer Front Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Outer Front Side Member And Preparing For Installation
        • Installing Outer Front Side Member
          • Danger Of Injury While Welding
          • Installing Outer Front Side Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 507955 Replacing Front Side Member (Section) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs Using Straightening Bench
          • Notes
          • Removing Front Side Member (Section)
        • Preparing Connection Areas Of The Body For Installing The Front Side Members (Section)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Front Side Members (Section)
        • Fitting In Front Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Front Side Member And Preparing For Installation
        • Installing Front Side Member (Section)
          • Danger Of Injury While Welding
          • Installing Front Side Member (Section)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 507955 Replacing Inner Front Side Member (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Inner Front Side Member
        • Preparing Connection Areas Of Body For Installation Of Inner Front Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Inner Front Side Member
        • Fitting Inner Front Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Inner Front Side Member And Preparing For Installation
        • Installing Inner Front Side Member
          • Danger Of Injury While Welding
          • Installing Inner Front Side Member
        • SUBSEQUENT Work
          • Subsequent Work For Body Repairs
      • WM 508719 Removing And Installing Cowl Panel Cover (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Cowl Panel Cover
          • Removing Lateral Cap
          • Disconnecting Plug Connection Of Spray Nozzle For Windscreen Washer System
          • Disconnecting Water Line For Windscreen Washer System
          • Disconnecting Plug Connection For GPS Antenna
          • Disconnecting Plug Connection For Radio Antenna
          • Removing Lower Cowl Panel Cover
        • Installing Cowl Panel Cover
          • Notes
          • Locking Plug Connection For Radio Antenna
          • Locking Plug Connection For GPS Antenna
          • Locking Water Line For Windscreen Washer System
          • Locking Plug Connection Of Spray Nozzle For Windscreen Washer System
          • Fastening Upper Cowl Panel Cover
          • Installing Lateral Cover Cap
        • Subsequent Work
      • WM 509555 Replacing Body Front Section (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Body Front Section
        • Preparing Connection Areas Of Body For Installing Body Front Section
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Body Front Section
        • Fitting Body Front Section And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Body Front Section And Preparing For Installation
        • Installing Body Front Section
          • Danger Of Injury While Welding
          • Installing Body Front Section
        • Subsequent Work
          • Subsequent Work For Body Repairs
    • 51 - Body Center, Roof, Frame - CARRERA (997)
      • WM 510141 Repairing Threaded Bushing For Belt Connection (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Repairing Threaded Bushing For Belt Connection
          • Removing Thread For Belt Fastening
        • Preparing Connection Areas Of The Body For Installing The Threaded Bushing
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Threaded Bushing
        • Fitting In Threaded Bushing And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Threaded Bushing And Preparing For Installation
        • Installing Thread For Belt Fastening
          • Danger Of Injury While Welding
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Installing Thread For Belt Fastening
        • Subsequent Work
          • Subsequent Work After Repair Of Threaded Bushing For Belt Fastening
      • WM 5101IN Check Dimensions For Body Diagnosis (Repairs) (TARGA 4 & TARGA 4S)
        • Tools
        • Tools And Materials
        • Check Dimensions For Body Diagnosis (Repairs)
          • Check Dimensions For The Interior Construction
          • Check Dimensions For The Exterior Construction
      • WM 510355 Replacing Roof (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Notes
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Roof
        • Preparing Connection Areas Of The Body For Installation Of The Roof
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Roof
        • Fitting Roof And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Roof And Preparing For Installation
        • Installing Roof
          • Notes
          • Affixing The Roof Sound Absorber
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 510555 Replacing Roof Pillar (Pipe) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Roof Pillar (Pipe) And Roof Frame Reinforcement
          • Removing Roof Pillar (Pipe)
          • Removing Roof Frame Reinforcement
        • Preparing Connection Areas Of The Body For Installing The Roof Pillar (Pipe) And Roof Frame Reinforcement
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Roof Pillar (Pipe)
          • Preparing Connection Areas Of Body For Installing Roof Frame Reinforcement
        • Fitting Roof Pillar (Pipe) And Roof Frame Reinforcement And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Roof Pillar (Pipe) And Preparing For Installation
          • Fitting Roof Frame Reinforcement And Preparing For Installation
        • Installing Roof Frame Reinforcement And Roof Pillar (Pipe)
          • Danger Of Injury While Welding
          • Installing Roof Frame Reinforcement
          • Installing Roof Pillar (Pipe)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 510955 Replacing Rear Cross Member (Side Impact Reinforcement) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Rear Cross Member (Side Impact Reinforcement)
          • Removing Rear Cross Member
          • Removing Reinforcement Plate For Rear Cross Member
        • Preparing Connection Areas Of The Body For Installing The Rear Cross Member (Side Impact Reinforcement)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Rear Cross Member
          • Preparing Connection Areas Of Body For Installing Reinforcement Plate For Rear Cross Member
        • Fitting Rear Cross Member (Side Impact Reinforcement) And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Rear Cross Member And Preparing For Installation
          • Fitting Reinforcement Plate For Rear Cross Member And Preparing For Installation
        • Installing Rear Cross Member (Side Impact Reinforcement)
          • Danger Of Injury While Welding
          • Installing Reinforcement Plate For Rear Cross Member
          • Installing Rear Cross Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 511155 Replacing Windscreen Frame (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Windscreen Frame
        • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing The Windscreen Frame
        • Fitting In Windscreen Frame And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Windscreen Frame And Preparing For Installation
        • Installing Windscreen Frame
          • Danger Of Injury While Welding
          • Installing Windscreen Frame
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 511155 Replacing Windscreen Frame (CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Windscreen Frame
        • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
        • Fitting In Windscreen Frame And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
        • Installing Windscreen Frame
          • Danger Of Injury While Welding
          • Installing Windscreen Frame
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 512119 Removing And Installing Rear Centre Panel (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Rear Center Panel
          • Loosening Inner Rear Center Panel
          • Loosening Outer Rear Center Panel
        • Installing Rear Center Panel
          • Notes
          • Fastening Inner Rear Center Panel
        • Subsequent Work
      • WM 512137 Disassembling And Assembling Rear Centre Panel (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Preliminary Work
        • Disassembling Rear Center Panel
          • Removing Seal For Rear Center Panel
        • Assembling Rear Center Panel
          • Installing Seal For Rear Center Panel
        • Subsequent Work
      • WM 512155 Replacing Rear Centre Panel Reinforcement (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Rear Center Panel Reinforcement
        • Preparing Connection Areas Of The Body For Installing Rear Center Panel Reinforcement
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing Rear Center Panel Reinforcement
        • Preparing Rear Center Panel Reinforcement For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Rear Center Panel Reinforcement For Installation
        • Installing Rear Center Panel Reinforcement
          • Danger Of Injury While Welding
          • Installing Rear Center Panel Reinforcement
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 513755 Replacing Outer Hinge Pillar (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Outer Hinge Pillar
        • Preparing Connection Areas Of The Body For Installing Outer Hinge Pillar
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Outer Hinge Pillar
        • Fitting Outer Hinge Pillar And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Outer Hinge Pillar For Installation
        • Installing Outer Hinge Pillar
          • Danger Of Injury While Welding
          • Installing Outer Hinge Pillar
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 514555 Replacing Outer Side Member (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, Gt2, Gt2 RS & Gt3 RS)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Outer Side Member
        • Preparing Connection Areas Of The Body For Installing The Outer Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Outer Side Member
        • Fitting Outer Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Outer Side Member And Preparing For Installation
        • Installing Outer Side Member
          • Danger Of Injury While Welding
          • Installing Outer Side Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 514855 Replacing Centre Side Member (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
          • Notes
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Center Side Member
        • Preparing Connection Areas Of Body For Installing Center Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Center Side Member
        • Fitting In Center Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Center Side Member And Preparing For Installation
        • Installing Center Side Member
          • Danger Of Injury While Welding
          • Installing Center Side Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 514855 Replacing Centre Side Member (Rear Section) (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
          • Notes
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Center Side Member (Rear Section)
        • Preparing Connection Areas Of The Body For Installing The Center Side Member (Rear Section)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Center Side Member (Rear Section)
        • Fitting In Center Side Member (Rear Section) And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Center Side Member (Rear Section) And Preparing For Installation
        • Installing Center Side Member (Rear Section)
          • Danger Of Injury While Welding
          • Installing Center Side Member (Rear Section)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 514955 Replacing Lower Side Member Reinforcement (Support Tube) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • REMOVING LOWER SIDE MEMBER REINFORCEMENt
        • Preparing Connection Areas Of The Body For Installing Lower Side Member Reinforcement
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Area Of Body For Installing Lower Side Member Reinforcement
        • Fitting Lower Side Member Reinforcement And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Retaining Bracket And Preparing For Installation
          • Fitting In Support Tube And Preparing For Installation
        • Installing Lower Side Member Reinforcement
          • Danger of injury while welding
          • Installing Lower Side Member Reinforcement
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 516255 Replacing Hinge Pillar Reinforcement (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
        • Removing Hinge Pillar Reinforcement
        • Preparing Connection Areas Of The Body For Installation Of Hinge Pillar Reinforcement
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Hinge Pillar Reinforcement
        • Fitting Hinge Pillar Reinforcement And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Hinge Pillar Reinforcement And Preparing For Installation
        • Installing Hinge Pillar Reinforcement
          • Danger Of Injury While Welding
          • Installing Hinge Pillar Reinforcement
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 516319 Removing And Installing Deformation Element (All Models)
        • Preliminary Work
        • Removing Deformation Element
        • Installing Deformation Element
        • Subsequent Work
          • Reworking
      • WM 516819 Removing And Installing Dashboard Support (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Dashboard Support
          • Notes
          • Replacing Bracket For Dashboard Support
        • Installing Dashboard Support
        • Subsequent Work
      • WM 518741 Repairing Threaded Bushes For Seat Cross Member (All Models)
        • Tools
        • Installing Threaded Bush
          • Installing Repair Threaded Bush For Seat Cross Member
      • WM 518755 Replacing Seat Cross Member (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Seat Cross Member
        • Preparing Connection Areas Of Body For Installing Seat Cross Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of Body For Installing Seat Cross Member
        • Preparing Seat Cross Member For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Seat Cross Member For Installation
        • Installing Seat Cross Member
          • Danger Of Injury While Welding
          • Installing Seat Cross Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 518941 Repairing Threaded Bushes For Suspension SUBFRAME Installation (All Models)
        • Tools
        • Installing Threaded Bush
          • Installing Repair Threaded Bush
      • WM 519219 Removing And Installing Cover For Front Underbody (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Front Underbody
        • Installing Cover For Front Underbody
        • Subsequent Work
      • WM 519319 Removing And Installing Cover For Centre Underbody (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Center Underbody
          • Notes
          • Removing Cover For center Underbody
        • Installing Cover For Center Underbody
          • Notes
          • Installing Cover For Side Underbody
        • Subsequent Work
      • WM 519419 Removing And Installing Cover For Rear Underbody (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removing Cover For Rear Underbody
          • Removing Cover For Rear Underbody - Rear Section
          • Removing Cover For Underbody - Front Section
        • Installing Cover For Rear Underbody
          • Installing Cover For Rear Underbody - Front Section
          • Installing Cover For Rear Underbody - Rear Section
        • Subsequent Work
          • Reworking
    • 53 - Body Rear - CARRERA (997)
      • WM 530555 Replacing Rear Closing Panel (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Rear Closing Panel
        • Fitting Rear Closing Panel And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Rear Closing Panel And Preparing For Installation
        • Installing Rear Closing Panel
          • Danger Of Injury While Welding
          • Installing Rear Closing Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 531755 Replacing Side Reinforcement (Frame For Light) (All Models - Up To 2005)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Side Reinforcement (Frame For Light)
        • Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
        • Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
        • Installing Side Reinforcement (Frame For Light)
          • Danger Of Injury While Welding
          • Installing Side Reinforcement (Frame For Light)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 531755 Replacing Side Reinforcement (Frame For Light) (All Models - 2006 And Up)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Preliminary Work For Body Repairs
        • Removing Side Reinforcement (Frame For Light)
        • Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
        • Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
        • Installing Side Reinforcement (Frame For Light)
          • Danger Of Injury While Welding
          • Installing Side Reinforcement (Frame For Light)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 534855 Replacing Rear Side Member (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Rear Side Member
        • Preparing Connection Areas Of The Body For Installing The Rear Side Member
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Rear Side Member
        • Preparing Rear Side Member For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Rear Side Member For Installation
        • Installing Rear Side Member
          • Danger Of Injury While Welding
          • Installing Rear Side Member
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 534855 Replacing Rear Side Member (Section) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Rear Side Member (Section)
        • Preparing Connection Areas Of The Body For Installing The Rear Side Members (Section)
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Rear Side Members (Section)
        • Fitting Rear Side Member And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Adjusting Rear Side Members And Preparing For Installation
        • Installing Rear Side Member (Section)
          • Danger Of Injury While Welding
          • Installing Rear Side Member (Section)
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 535019 Removing And Installing Side Section Support (All Models)
        • Technical Values
        • Removing Side Section Support
        • Installing Side Section Support
      • WM 535541 Repairing Side Panel (Lock Peg) (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Repairing Side Panel (Lock Peg)
          • Repairing The Side Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 535555 Replacing Side Panel (CABRIO Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Side Panel
        • Preparing Connection Areas Of The Body For Installing The Side Panel
          • Safety Instructions For Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Side Section
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting Side Section And Preparing For Installation
        • Installing Side Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 535555 Replacing Side Section (Except CABRIO Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Side Section
        • Preparing Connection Areas Of The Body For Installation Of The Side Section
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installation Of The Side Section
        • Fitting Side Section And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Side Section And Preparing For Installation
        • Installing Side Section
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 536155 Replacing Inner Side Section (Except CABRIO Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Straightening Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Inner Side Section
          • Removing Inner Side Section (Lower Part)
          • Removing Inner Side Section (Upper Part)
        • Preparing Connection Areas Of The Body For Installing The Inner Side Sections
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing Inner Side Sections (Lower Parts)
          • Preparing Connection Areas Of The Body For Installing Inner Side Sections (Upper Parts)
          • Safety Instructions For Flying Sparks During Grinding And Welding Work
        • Fitting Inner Side Section And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Inner Side Section (Lower Part) And Preparing For Installation
          • Fitting In Inner Side Section (Upper Part) And Preparing For Installation
        • Installing Inner Side Section
          • Danger Of Injury While Welding
          • Installing Inner Side Section (Upper Part)
          • Installing Inner Side Section (Lower Part)
          • Danger Of Injury When Welding
        • Subsequent Work
          • Subsequent Work For Body Repairs
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
      • WM 536255 Replacing Frame For Light (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs
        • Removing Frame For Light
        • Preparing Connection Areas Of The Body For Installing The Light Frame
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Light Frame
        • Fitting In Light Frame And Preparing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Fitting In Light Frame And Preparing For Installation
        • Installing Frame For Light
          • Danger Of Injury While Welding
          • Installing Frame For Light
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 536855 Replacing Rear Wheel Housing (All Models)
        • Tools
        • General Warning Notes
          • Safety Instructions For Body Repairs
        • Tools And Materials
        • Preliminary Work For Body Repairs With Alignment Bench
          • Preliminary Work For Body Repairs With Straightening Bench
        • Removing Rear Wheel Housing
          • Removing Outer Rear Wheel Housing
          • Removing Inner Rear Wheel Housing
        • Preparing Connection Areas Of The Body For Installing The Rear Wheel Housing
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
          • Preparing Connection Areas Of The Body For Installing The Inner Rear Wheel Housing
          • Preparing Connection Areas Of The Body For Installing The Outer Rear Wheel Housing
        • Preparing Rear Wheel Housing For Installation
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Preparing Inner Rear Wheel Housing For Installation
          • Preparing Outer Rear Wheel Housing For Installation
        • Installing Rear Wheel Housing
          • Danger Of Injury While Welding
          • Installing Inner Rear Wheel Housing
          • Installing Outer Rear Wheel Housing
        • Subsequent Work
          • Subsequent Work For Body Repairs
      • WM 536919 Removing And Installing Rear Wheel Housing Liner (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Rear Wheel Housing Liner
          • Removing Rear Wheel Housing Liner - Rear Section
          • Removing Rear Wheel Housing Liner - Front Section
        • Installing Rear Wheel Housing Liner
          • Notes
          • Installing Rear Wheel Housing Liner - Rear Section
        • Subsequent Work
    • 55 - Lids, Flaps -- CARRERA (997)
      • WM 551319 Removing And Installing Servo Motor For Front Lid Release (All Models)
        • Preliminary work
          • Overview
          • Preliminary work for servo motor for hood release
        • Removing servo motor for front lid release
          • Removing the servo motor for front lid release
        • Installing servo motor for front lid release
          • Overview
          • Installing the servo motor for front lid release
        • Subsequent work
          • Subsequent work for servo motor for hood release
      • WM 551019 Removing And Installing Release For Front Lid (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3)
        • Preliminary work
        • Removing release for front lid
        • Installing release for front lid
        • Subsequent work
      • WM 551719 Removing And Installing Front Lower Part Of Lid Lock (All Models)
        • Technical values
        • Preliminary work
        • Removing front lower part of lid lock
          • Removing bowden cable for emergency release
          • Pressing out bowden cable for emergency release
          • Disconnect electrical plug connection
          • Removing lower part of lid lock
          • Removing lid-release cable
        • Installing front lower part of lid lock
          • Inserting lid-release cable
          • Installing lower part of lid lock
          • Locking electrical plug connection
          • Installing bowden cable for emergency release
          • Inserting bowden cable for emergency release
        • Subsequent work
          • Reworking
      • WM 551819 Removing And Installing Front Upper Part Of Lid Lock (All Models)
        • Technical values
        • Removing front upper part of lid lock
          • Removing upper part of front lid lock
        • Installing front upper part of lid lock
          • Installing upper part of front lid lock
          • Checking lid functions
      • WM 552215 Adjusting Front Lid (All Models)
        • Tools
        • Technical values
        • Adjusting front lid
          • Adjusting lid in X and Y direction
          • Adjusting lid in Z direction
          • Adjusting front lid
      • WM 552219 Removing And Installing Front Cover (All Models)
        • Technical values
        • Removing front lid
        • Installing front lid
        • Reworking
      • WM 552237 Disassembling And Assembling Front Lid (All Models)
        • Preliminary work
        • Disassembling front lid
          • Removing rubber pad
          • Removing self-adhesive label
        • Assembling front lid
          • Installing rubber pad
          • Installing self-adhesive label
        • Subsequent work
      • WM 552519 Removing And Installing Front Lid Hinge (All Models)
        • Technical values
        • Preliminary work
        • Removing front lid hinge
        • Install front lid hinge
        • Reworking
      • WM 553119 Removing And Installing Front Pneumatic Spring (All Models)
        • Removing front pneumatic spring
          • Removing front pneumatic spring at lid end
          • Removing front pneumatic spring on body
        • Installing front pneumatic spring
          • Installing front pneumatic spring on the body
          • Installing front pneumatic spring at lid end
          • Function test on pneumatic spring
      • WM 553319 Removing And Installing Front Lid Seal(All Models)
        • Removing front lid seal
          • Notes
          • Removing front lid seal
        • Installing front lid seal
          • Mounting front lid seal
          • Installing front lid seal
      • WM 553719 Removing And Installing Filler Flap (All Models)
        • Tools
        • Removing filler flap
          • Notes
          • Removing plastic hinge
        • Installing filler flap
          • Installing plastic hinge
          • Installing filler flap
      • WM 553819 Removing And Installing Switching Element For Filler Flap (All Models)
        • Preliminary work
        • Removing switching element for filler flap
        • Installing switching element for filler flap
        • Subsequent work
      • WM 555719 Removing And Installing Release For Rear Lid (All Models)
        • Preliminary work
        • Removing release for rear lid
        • Installing release for rear lid
        • Subsequent work
      • WM 556119 Removing And Installing Servo Motor For Emergency Release (All Models)
        • Technical values
        • Preliminary work
          • Preliminary work on servo motor for emergency release
        • Removing servo motor for emergency release
        • Installing servo motor for emergency release
        • Subsequent work
      • WM 556219 Removing And Installing Front Emergency Release(All Models)
        • Technical values
        • Removing front emergency release
        • Installing front emergency release
          • Installing support for release handle
          • Installing front emergency release
        • Checking inner release of luggage compartment (Trunk Entrapment)
      • WM 558219 Removing And Installing Rear Lid Release Switch(All Models)
        • Preliminary work
        • Removing rear lid release switch
        • Installing rear lid release switch
        • Subsequent work
      • WM 558419 Removing And Installing Motor For Rear Lid Release (All Models)
        • Technical values
        • Preliminary work
        • Removing motor for rear lid release
          • Removing rear lid release motor
        • Installing motor for rear lid release
          • Installing rear-lid release motor
        • Subsequent work
      • WM 558619 Removing And Installing Lower Part Of Lid Lock At Rear (All Models)
        • Technical values
        • Preliminary work
        • Removing lower part of lid lock at rear
          • Disconnecting electrical plug connection
          • Removing lower part of lid lock at rear
          • Disconnecting the emergency release cable
        • Installing lower part of lid lock at rear
          • Installing the emergency release cable
          • Installing lower part of lid lock at rear
          • Locking electrical plug connection
        • Subsequent work
      • WM 558719 Removing And Installing Rear Upper Part Of Lid Lock(All Models)
        • Technical values
        • Removing rear upper part of lid lock
        • Installing rear upper part of lid lock
        • Checking lid functions
      • WM 559015 Adjusting Rear Lid (All Models)
        • Tools
        • Technical values
        • Adjusting rear lid
          • Adjusting rear lid in X and Z direction
          • Adjusting rear lid in Y direction
          • Adjusting rear lid
        • Subsequent work
      • WM 559019 Removing And Installing Rear Lid (All Models)
        • Technical values
        • Removing rear lid
          • Disconnecting wiring harness on rear lid
          • Removing rear lid
        • Installing rear lid
          • Notes
          • Locking wiring harness on rear lid
      • WM 559037 Disassembling And Assembling Rear Lid (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Preliminary work
        • Disassembling rear lid
          • Removing adjusting element
        • Removing rubber cover
        • Assembling rear lid
          • Fitting rubber cover
          • Installing adjusting element
        • Subsequent work
      • WM 559037 Disassembling And Assembling Rear Lid (I-No. XAF) (Turbo Coupe, Turbo CABRIO)
        • Tools
        • Preliminary work
        • Disassembling rear lid
          • Removing sealing rubber
          • Removing adjusting element
          • Removing air guide
          • Removing fan motor
          • Removing wire harness for rear lid
          • Removing spoiler lip
        • Assembling rear lid
          • Installing spoiler lip
          • Installing wire harness for rear lid
          • Installing fan motor
          • Installing air guide
          • Installing adjusting element
          • Installing sealing rubber
        • Subsequent work
      • WM 559119 Removing And Installing Rear Lid Hinge(All Models)
        • Technical values
        • Preliminary work
        • Removing rear lid hinge
        • Installing rear lid hinge
        • Subsequent work
      • WM 559319 Removing And Installing Rear Pneumatic Spring (All Models)
        • Removing rear pneumatic spring
          • Removing rear pneumatic spring at lid end
          • Removing rear pneumatic spring at the body
        • Installing rear pneumatic spring
          • Installing rear pneumatic spring on the body
          • Installing rear pneumatic spring at lid end
          • Function test on pneumatic spring
  • General Collision Information
    • 5X - Body General - CARRERA (997 )
      • WM 5X00IN General Information And Notes On Quality (All Models)
        • Measures For Maintaining Long-Term Body Protection
          • Notes
          • Prerequisite For Maintaining The Long-Life Guarantee
        • Electronic Control Modules
          • Notes
          • Battery Trickle Charge
          • Protection Against Overvoltage When Performing Welding Work
          • Replacing Control Modules
      • WM 5X00IN Procedure For Damage Diagnosis (All Models)
        • Tools
        • Instructions
        • Procedure For Damage Diagnosis
        • Identifiable Deformations On The Body Structure
        • No Identifiable Deformations On The Body Structure
      • WM 5000IN Work Sequence Fore Determining Extent Of Damage To Vehicles Involved In An Accident (All Models)
        • Tools
        • Instructions
      • WM 5X00IN Work Sequence For Accident Repairs (All Models)
        • Work Sequence For Accident Repairs
        • Repair
        • Replacement
      • WM 5X00IN (All Models)
        • Safety Instructions For Raising Vehicles
          • Danger Of Injury When Raising Vehicles
          • Damage When Raising Vehicles
        • Safety Instructions For Welding
          • Danger Of Injury When Welding
          • Safety Instructions For Flying Sparks During Grinding And Welding Work
          • Safety Instructions For Fuel Tank
          • Safety Instructions For Air Conditioning
        • Safety Instructions For Adhesive Bonding
          • Danger Of Poisoning And Injury When Adhesive Bonding
          • Safety Instructions For Teromix-6700 Two-Component Adhesive
        • Safety Instructions For Installation Work
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Safety Instructions For Airbag System
          • Safety Instructions For Door
        • Safety Instructions For Corrosion Protection
          • Safety Instructions For Plug Location Plan (Body)
          • Safety Instructions For Water Drains (Body)
          • Safety Instruction For Deformation Element
          • Possible Separation Points On Inner Side Member
          • Baked Hardening
      • WM 5X00IN Tools And Metalworking Tools For Body Repairs (All Models)
        • Tools
        • Straightening Systems
        • Metalworking Tools
      • WM 5X00IN Diagram - Key To Symbols For Welding Work (All Models)
        • Diagram - Keys To Symbols For Welding Work
          • Resistance Spot Welding
          • Inert-Gas Arc Welding (MAG Procedure)
          • Gas Welding
      • WM 5X00IN Corrosion Protection Measures During Repairs (All Models)
        • Measures For Maintaining Long-Term Body Protection
        • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
      • WM 5X00IN Body Parts Of Various Sheet-Steel Strengths (All Models)
        • High-Strength Steel Plates
        • Highest-Strength Steel Plates
        • Tailored Blanks
        • Baked Hardening
        • Straightening Body Parts
        • Welding Work
        • Reshaping
        • Separation Points
      • WM 5X00IN Vehicle Identification Number (All Models)
        • Tools
        • Re-Imprinting New Vehicle Identification Number
          • Vehicle Identification Number
          • Spacer For Replacing The Vehicle Identification Number
          • Re-Imprinting New Vehicle Identification Number
      • WM 5X00IN Changing Identification Plate (All Models)
        • Changing Identification Plate
          • Installation Location Of Identification Data Plate On The Vehicle
          • Identification Data Plate RoW
          • Identification Data Plate USA
          • Identification Data Plate Canada
      • WM 5X00IN Diagram: Plug Plan (All Models)
        • Diagram: Plug Plan
          • Top Of Front Of Vehicle
          • Bottom Of Front Of Vehicle
          • Side Body Front Section
          • Bottom Of Lower Side Member And Floor
          • Top Of Lower Side Member And Floor
          • Bottom Of Rear End
          • Top Of Rear End
          • Side Of Rear End
      • WM 5X00IN Underbody Protection (All Models)
        • Tools
        • Tools And Materials
          • Tools
          • Materials
        • Diagram Underbody Protection
          • Overview, Undersealing
          • Bottom Of Front Of Vehicle, Layout Plan
          • Lower Side Member And Floor, Layout Plan
          • Bottom Of Rear End, Layout Plan
      • WM 5X00IN Seam Seals (All Models)
        • Accessories
          • Note On Seam Seals
          • Door
          • Rear Lid
        • Unpainted BODYSHELL
          • Top Of Front Of Vehicle
          • Top Of Front Of Vehicle, Front
          • Top Of Front Of Vehicle, (Radiator Tank)
          • Front Of Vehicle And Inside A-Pillars
          • Side Of Front Of Vehicle
          • Top Of Inside Front Of Vehicle And Floor
          • Top Of Lower Side Member And Floor
          • Wheel Housing And Upper Rear Side Section
          • Bottom Of Front Of Vehicle
          • Bottom Of Lower Side Member And Floor
          • Top Of Rear End
          • Bottom Of Rear End
          • Side Of Rear End
          • Roof
      • WM 5X00IN Diagram - Body Gap Dimensions (All Models)
        • Tools
        • Technical Values
        • Diagram - Body Front Gap Dimensions
          • Gap Dimensions, Body Front
        • Diagram - Body Center Gap Dimensions
          • Gap Dimensions, Body Center
      • WM 5X00IN Diagram Of Body Bonding Points And Sealing Elements (All Models)
        • Diagram Of Body Bonding Points And Sealing Elements
      • WM 5X00IN Working With Body Structural Adhesive (All Models)
        • Tools
        • Technical Values
        • Tools And Materials
          • Processing Structural Body Adhesive
        • Information On Structural Bonding In Vehicle Manufacturing
          • General
          • Combined Joining Processes
          • Separating Body Components
          • Welding In Body Components
        • Working With Adhesives
          • General Information
          • Preparing Bonding Surfaces
          • Processing Conditions
          • Joining Process
            • Applying Adhesive
            • Joining Components
            • Removing Excess Material
          • Hardening
          • Assembly Strength
          • Corrosion Protection
          • Disposal
          • Endurance Strength
        • Handling Primer
          • General
          • 2-Component SIP
        • Handling Processing Devices
          • Applicator Gun
• Drivelines & Axles
  • Axle Shafts
    • 39 - Final Drive - Differential, Differential Lock -- CARRERA (997)
      • WM 390219 Removing And Installing CARDAN Shaft (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Shaft
        • Installing Cardan Shaft
        • Subsequent Work
      • WM 390815 Adjusting The Ring Gear And Pinion Shaft (Gt2, Gt3, Gt2 RS & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Measuring The Differential (Total Shim Thickness S1 And S2)
        • Measuring And Adjusting The Output Shaft (Total Shim Thickness S4 And S5)
        • Measuring And Adjusting The Output Shaft (Total Shim Thickness S3)
        • Adjusting The Differential (Total Shim Thickness S1 And S2)
        • Adjusting Bevel Gear/Crown Wheel Pairing (Tooth Backlash)
        • Subsequent Work
      • WM 391555 Replacing Double Sealing Ring (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Double Sealing Ring
        • Installing Double Sealing Ring
        • Subsequent Work
      • 392219 - Removing And Installing Sealing Ring For Left HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Speedster, CARR. GTS Coupe & CARR. GTS CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Left Halfshaft Flange
        • Installing Sealing Ring For Left Halfshaft Flange
        • Subsequent Work
      • 392219 - Removing And Installing Sealing Ring For Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, "Sport Classic", CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster
        • Tools
        • Preliminary work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Short Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Right HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt3, Gt2 RS & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Sealing Ring For Right Halfshaft Flange
        • Installing Sealing Ring For Right Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Left HALFSHAFT Flange (Turbo Coupe, Turbo CABRIO, Gt2, Gt3, & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Sealing Ring For Left Halfshaft Flange
        • Installing Sealing Ring For Left Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Short HALFSHAFT Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Long HALFSHAFT Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Long Halfshaft Flange
        • Installing Long Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Long HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Long Halfshaft Flange
        • Installing Long Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Removing Front Halfshaft Flange
        • Installing Front Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Left HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS & Gt3)
        • Technical Values
        • Preliminary Work
        • Removing Left Halfshaft Flange
        • Installing Left Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Right HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS & Gt3)
        • Technical Values
        • Preliminary Work
        • Removing Right Halfshaft Flange
        • Installing Right Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, "Sport Classic", CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster)
        • Tools
        • Preliminary Work
        • Removing Short Halfshaft Flange
          • Removing Short Drive Shaft Flange
        • Installing Short Halfshaft Flange
          • Installing Short Drive Shaft Flange
        • Subsequent Work
      • WM 394019 Removing And Installing Differential With Differential Lock (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Differential With Differential Lock
        • Installing Differential With Differential Lock
        • Subsequent Work
      • WM 394037 Disassembling And Assembling Differential With Differential Lock (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Disassembling Differential With Differential Lock
          • Dismantling Differential And Differential Lock
        • Assembling Differential With Differential Lock
          • Assembling Differential And Differential Lock
        • Subsequent Work
      • WM 395819 Removing And Installing Cover For Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cover For Front Final Drive
          • Removing Cover For Final Drive
        • Installing Cover For Front Final Drive
          • Installing Cover For Final Drive
        • Subsequent Work
      • WM 395919 Removing And Installing Sealing Ring For Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Front Halfshaft Flange
        • Installing Sealing Ring For Front Halfshaft Flange
        • Subsequent Work
      • WM 396219 Removing And Installing Support For Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Support For Front Final Drive
        • Installing Support For Front Final Drive
        • Subsequent Work
          • Preliminary Work
      • WM 396219 Removing And Installing Support For Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Support For Front Final Drive
          • Removing Support For Final Drive
        • Installing Support For Front Final Drive
          • Installing Support For Final Drive
        • Subsequent Work
      • WM 396319 Removing And Installing Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Preliminary Work
        • Removing Front Halfshaft Flange
        • Installing Front Halfshaft Flange
        • Subsequent Work
      • WM 396419 Removing And Installing CARDAN Flange (CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Flange
        • Installing Cardan Flange
        • Subsequent Work
      • WM 396419 Removing And Installing CARDAN Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Flange
          • Removing Cardan Flange - Automatic Transmission
          • Removing Cardan Flange - Manual Transmission
        • Installing Cardan Flange
          • Installing Cardan Flange - Automatic Transmission
          • Installing Cardan Flange - Manual Transmission
        • Subsequent Work
          • Subsequent Work - Automatic Transmission
          • Subsequent Work - Manual Transmission
      • WM 397919 Removing And Installing Electromagnetic Clutch (Turbo Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Electromagnetic Clutch
        • Installing Electromagnetic Clutch
        • Subsequent Work
      • WM 398219 Removing And Installing Sealing Ring For CARDAN Flange (CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Cardan Flange
        • Installing Sealing Ring For Cardan Flange
        • Subsequent Work
      • WM 398819 Removing And Installing Four-Wheel Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Front Final Drive
        • Installing Front Final Drive
        • Subsequent Work
      • WM 3988TW Technical Data On Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Technical Values
          • Overview
          • Notes
          • Transmission Ratio
          • Filling Capacities
      • WM 399035 Checking And Topping Up Oil For Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Checking And Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399035 Checking And Topping Up Oil For Final Drive (With Transmission Oil) (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
          • Notes
          • Checking And Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399035 Checking And Topping Up Oil For Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Information
        • Preliminary Work
        • Checking And Topping Up Oil For Front Final Drive
          • Checking And Topping Up Differential Oil For Front Final Drive
          • Checking And Topping Up Clutch Fluid For Front Final Drive
        • Subsequent Work
      • WM 399055 Changing Oil For Final Drive (With Transmission Oil) (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Changing Oil For Final Drive
          • Draining Oil For Final Drive
          • Subsequent Work
      • WM 399055 Changing Oil In Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
          • Overview
          • Filling Capacities
        • Information
        • Preliminary Work
        • Draining Oil For Front Final Drive
          • Draining Differential Oil For Front Final Drive
          • Draining Clutch Fluid For Front Final Drive
        • Filling In Oil For Front Final Drive
          • Filling In Differential Oil For Front Final Drive
          • Filling In Clutch Fluid For Front Final Drive
        • Subsequent Work
      • WM 399055 Changing Oil For Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
          • Overview
          • Filling Capacities
        • Information
        • Preliminary Work
        • Changing Oil For Final Drive
          • Notes
          • Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399519 Removing And Installing Control Unit For Four-Wheel Drive (PTM) (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Control Unit For Four-Wheel Drive (PTM)
        • Removing Control Unit For Four-Wheel Drive (PTM)
        • Installing Control Unit For Four-Wheel Drive (PTM)
        • Subsequent Work
          • Subsequent Work For Control Unit For Four-Wheel Drive (PTM)
          • Programming Control Unit For Four-Wheel Drive
          • Coding Control Unit For Four-Wheel Drive (PTM)
    • 40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997)
      • WM 400000 Lifting The Vehicle (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt3 RS)
        • Preliminary Work
          • Lifting The Vehicle
      • WM 4000IN Tests/Notes For All-Wheel Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Information For Four-Wheel Drive Vehicles
          • Balancing Wheels On Vehicle
          • Controlled Four-Wheel Drive (PTM) On The 911 Turbo
          • Power Measurements/Function Tests On The 911 Turbo
          • Power Measurements On The 911 Carrera 4/911 Carrera 4S
          • Brake Test
          • Handbrake Test On The 911 Turbo
          • Towing
      • WM 400119 Removing And Installing Front Axle (All Models)
        • Technical Values
        • Information
          • Component Overview
        • Preliminary Work
        • Removing And Installing Front Axle
          • Removing Front Axle
          • Installing Front Axle
          • Subsequent Work
      • WM 4001TW Tightening Torques For Front Axle (All Models)
        • Technical Values
        • Tightening Torques For Cross Member/Side Member (One Component)
        • Tightening Torques For Diagonal Brace
        • Tightening Torques For Axle Strut
        • Tightening Torques For Spring Strut
        • Tightening Torques For Wheel Carrier
        • Tightening Torques For Stabilizer
        • Tightening Torques For Steering
        • Tightening Torques For Wheel Mounting
      • WM 401719 Removing And Installing Lower Front-Axle Control Arm (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Notes
          • Removing Trailing Arm
        • Installing Trailing Arm
        • Subsequent Work
      • WM 401819 Removing And Installing Diagonal Arm (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Removing Diagonal Arm
        • Installing Diagonal Arm
      • WM 404119 Removing And Installing Front Drive Shaft (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Drive Shaft
          • Removing Front Drive Shaft
          • Installing Front Drive Shaft
        • Subsequent Work
      • WM 405019 Removing And Installing Front Wheel Bearing Housing (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • Preliminary Work
        • Removing Wheel Bearing Housing
        • Installing Wheel Bearing Housing
          • Notes
          • Fitting Front-Axle Control Arm, Left
          • Fitting Front-Axle Control Arm, Right
        • Subsequent Work
      • WM 405719 Removing And Installing Front Wheel Bearing (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing And Installing Front Wheel Bearing
          • Removing Front Wheel Bearing
          • Installing Front Wheel Bearing
        • Subsequent Work
      • WM 405055 Replacing Front Wheel Bearing Housing (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Replacing Front Wheel Bearing Housing - Preliminary Work
        • Removing Front Wheel Bearing Housing
        • Completing (Disassembling And Assembling) Wheel Bearing Housing
        • Installing Front Wheel Bearing Housing
        • Replacing Front Wheel Bearing Housing - Subsequent Work
      • WM 407819 Removing And Installing Connecting Link (Suspension/Stabilizer) (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO)
        • Removing Front Connecting Link (Suspension/Stabilizer)
          • Notes
          • Installing Front Connecting Link (Suspension/Stabilizer)
      • WM 408519 Removing And Installing Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Tools
        • Removing And Installing Spring Strut - Preliminary Work
        • Removing front Spring Strut
        • Installing Front Spring Strut
        • Removing And Installing Spring Strut - Subsequent Work
      • WM 408519 Removing And Installing Front Spring Strut (All Models)
        • Tools
        • Information
        • Preliminary Work
        • Removing Front Spring Strut
        • Installing Front Spring Strut
          • Notes
          • Fitting Front-Axle Control Arm, Left
          • Fitting Front-Axle Control Arm, Right
        • Subsequent Work
      • WM 408537 Disassembling And Assembling Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Tools
        • Information
          • Component And Assembly Overview (With And Without PASM)
        • Disassembling And Assembling Spring Strut
          • Disassembling Spring Strut
          • Coil Spring/Compensating Plate Allocation
          • Allocation Of Vibration Dampers
          • Assembling Spring Strut
      • WM 408537 Disassembling And Assembling Front Spring Strut (All Models)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
          • Disassembling Front Spring Strut
          • Preliminary Work And Notes On Assembly
          • Assembling Front Spring Strut
    • 42 - Rear Wheel Suspension, Drive Shafts -- CARRERA (997)
      • WM 4201TW Tightening Torques For Rear Axle (All Models)
        • Technical Values
        • Tightening Torques For Rear Axle
          • Tightening Torques For Carrier Side Section/Cross Member
        • Tightening Torques For Axle Strut
          • Notes
          • Tightening Torques For Wheel Carrier
          • Tightening Torques For Spring Strut
          • Tightening Torques For Stabilizer
          • Tightening Torques For Drive Shaft
          • Tightening Torques For Plug-In Couplings For Steering Hydraulics
          • Tightening Torques For Plug-In Couplings For Clutch Hydraulic System
          • Tightening Torques For Wheel Mounting
      • WM 422119 Removing And Installing Rear Drive Shaft (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing
          • Removing Rear Drive Shaft
        • Installing
          • Installing Rear Drive Shaft
        • Subsequent Work
          • Notes
          • Checking Wheel-Alignment Values
      • WM 422855 Replacing Bellows Drive Shaft (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Information
        • Replacing Bellows Drive Shaft
      • WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear-Axle Carrier Side Section
          • Removing Rear-Axle Carrier Side Section
          • Installing Rear-Axle Carrier Side Section
          • Subsequent Work
      • WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Wheel Bearing Housing
        • Installing Wheel Bearing Housing
        • Subsequent Work
      • WM 425819 Removing And Installing Rear Wheel Bearing (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Rear Wheel Bearing
        • Installing Rear Wheel Bearing
        • Subsequent Work
      • WM 427119 Removing And Installing Rear Spring Strut (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing And Installing Spring Strut - Preliminary Work
        • Removing Spring Strut
        • Installing Spring Strut
        • Removing And Installing Spring Strut - Subsequent Work
      • WM 427137 Disassembling And Assembling Rear Spring Strut (911 Gt3 RS, 911 Gt2, 911 Gt3)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Assembling Rear Spring Strut
      • WM 427137 Disassembling And Assembling Rear Spring Strut - With And Without PASM (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Information
          • Component And Assembly Overview (With And Without PASM)
          • Disassembling Rear Spring Strut
          • Coil Spring/Compensating Plate Allocation
          • Rear Vibration Damper Allocation
          • Assembling Spring Strut
      • WM 427137 Disassembling And Assembling Rear Spring Strut - As Of 2010 Model (911 Gt3, 911 Gt3 RS)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Preliminary Work And Notes On Assembly
          • Coil Spring/Compensating Plate Allocation
          • Assembling Rear Spring Strut
      • WM 429019 Removing And Installing Rear Anti-Roll Bar (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Anti-Roll Bar
        • Installing Anti-Roll Bar
      • WM 429155 Replacing Connecting Link (Suspension/Stabilizer) (911 Gt3, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing And Installing Rear Connecting Link (Suspension/Stabilizer)
          • Removing Rear Connecting Link (Suspension/Stabilizer)
          • Installing Rear Connecting Link (Suspension/Stabilizer)
  • Differentials & Drive Axles
    • 39 - Final Drive - Differential, Differential Lock -- CARRERA (997)
      • WM 390219 Removing And Installing CARDAN Shaft (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Shaft
        • Installing Cardan Shaft
        • Subsequent Work
      • WM 390815 Adjusting The Ring Gear And Pinion Shaft (Gt2, Gt3, Gt2 RS & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Measuring The Differential (Total Shim Thickness S1 And S2)
        • Measuring And Adjusting The Output Shaft (Total Shim Thickness S4 And S5)
        • Measuring And Adjusting The Output Shaft (Total Shim Thickness S3)
        • Adjusting The Differential (Total Shim Thickness S1 And S2)
        • Adjusting Bevel Gear/Crown Wheel Pairing (Tooth Backlash)
        • Subsequent Work
      • WM 391555 Replacing Double Sealing Ring (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Double Sealing Ring
        • Installing Double Sealing Ring
        • Subsequent Work
      • 392219 - Removing And Installing Sealing Ring For Left HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Speedster, CARR. GTS Coupe & CARR. GTS CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Left Halfshaft Flange
        • Installing Sealing Ring For Left Halfshaft Flange
        • Subsequent Work
      • 392219 - Removing And Installing Sealing Ring For Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, "Sport Classic", CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster
        • Tools
        • Preliminary work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Short Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Right HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt3, Gt2 RS & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Sealing Ring For Right Halfshaft Flange
        • Installing Sealing Ring For Right Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Left HALFSHAFT Flange (Turbo Coupe, Turbo CABRIO, Gt2, Gt3, & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Sealing Ring For Left Halfshaft Flange
        • Installing Sealing Ring For Left Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Short HALFSHAFT Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Long HALFSHAFT Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Long Halfshaft Flange
        • Installing Long Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Long HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Long Halfshaft Flange
        • Installing Long Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Removing Front Halfshaft Flange
        • Installing Front Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Left HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS & Gt3)
        • Technical Values
        • Preliminary Work
        • Removing Left Halfshaft Flange
        • Installing Left Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Right HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS & Gt3)
        • Technical Values
        • Preliminary Work
        • Removing Right Halfshaft Flange
        • Installing Right Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, "Sport Classic", CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster)
        • Tools
        • Preliminary Work
        • Removing Short Halfshaft Flange
          • Removing Short Drive Shaft Flange
        • Installing Short Halfshaft Flange
          • Installing Short Drive Shaft Flange
        • Subsequent Work
      • WM 394019 Removing And Installing Differential With Differential Lock (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Differential With Differential Lock
        • Installing Differential With Differential Lock
        • Subsequent Work
      • WM 394037 Disassembling And Assembling Differential With Differential Lock (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Disassembling Differential With Differential Lock
          • Dismantling Differential And Differential Lock
        • Assembling Differential With Differential Lock
          • Assembling Differential And Differential Lock
        • Subsequent Work
      • WM 395819 Removing And Installing Cover For Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cover For Front Final Drive
          • Removing Cover For Final Drive
        • Installing Cover For Front Final Drive
          • Installing Cover For Final Drive
        • Subsequent Work
      • WM 395919 Removing And Installing Sealing Ring For Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Front Halfshaft Flange
        • Installing Sealing Ring For Front Halfshaft Flange
        • Subsequent Work
      • WM 396219 Removing And Installing Support For Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Support For Front Final Drive
        • Installing Support For Front Final Drive
        • Subsequent Work
          • Preliminary Work
      • WM 396219 Removing And Installing Support For Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Support For Front Final Drive
          • Removing Support For Final Drive
        • Installing Support For Front Final Drive
          • Installing Support For Final Drive
        • Subsequent Work
      • WM 396319 Removing And Installing Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Preliminary Work
        • Removing Front Halfshaft Flange
        • Installing Front Halfshaft Flange
        • Subsequent Work
      • WM 396419 Removing And Installing CARDAN Flange (CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Flange
        • Installing Cardan Flange
        • Subsequent Work
      • WM 396419 Removing And Installing CARDAN Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Flange
          • Removing Cardan Flange - Automatic Transmission
          • Removing Cardan Flange - Manual Transmission
        • Installing Cardan Flange
          • Installing Cardan Flange - Automatic Transmission
          • Installing Cardan Flange - Manual Transmission
        • Subsequent Work
          • Subsequent Work - Automatic Transmission
          • Subsequent Work - Manual Transmission
      • WM 397919 Removing And Installing Electromagnetic Clutch (Turbo Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Electromagnetic Clutch
        • Installing Electromagnetic Clutch
        • Subsequent Work
      • WM 398219 Removing And Installing Sealing Ring For CARDAN Flange (CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Cardan Flange
        • Installing Sealing Ring For Cardan Flange
        • Subsequent Work
      • WM 398819 Removing And Installing Four-Wheel Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Front Final Drive
        • Installing Front Final Drive
        • Subsequent Work
      • WM 3988TW Technical Data On Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Technical Values
          • Overview
          • Notes
          • Transmission Ratio
          • Filling Capacities
      • WM 399035 Checking And Topping Up Oil For Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Checking And Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399035 Checking And Topping Up Oil For Final Drive (With Transmission Oil) (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
          • Notes
          • Checking And Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399035 Checking And Topping Up Oil For Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Information
        • Preliminary Work
        • Checking And Topping Up Oil For Front Final Drive
          • Checking And Topping Up Differential Oil For Front Final Drive
          • Checking And Topping Up Clutch Fluid For Front Final Drive
        • Subsequent Work
      • WM 399055 Changing Oil For Final Drive (With Transmission Oil) (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Changing Oil For Final Drive
          • Draining Oil For Final Drive
          • Subsequent Work
      • WM 399055 Changing Oil In Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
          • Overview
          • Filling Capacities
        • Information
        • Preliminary Work
        • Draining Oil For Front Final Drive
          • Draining Differential Oil For Front Final Drive
          • Draining Clutch Fluid For Front Final Drive
        • Filling In Oil For Front Final Drive
          • Filling In Differential Oil For Front Final Drive
          • Filling In Clutch Fluid For Front Final Drive
        • Subsequent Work
      • WM 399055 Changing Oil For Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
          • Overview
          • Filling Capacities
        • Information
        • Preliminary Work
        • Changing Oil For Final Drive
          • Notes
          • Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399519 Removing And Installing Control Unit For Four-Wheel Drive (PTM) (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Control Unit For Four-Wheel Drive (PTM)
        • Removing Control Unit For Four-Wheel Drive (PTM)
        • Installing Control Unit For Four-Wheel Drive (PTM)
        • Subsequent Work
          • Subsequent Work For Control Unit For Four-Wheel Drive (PTM)
          • Programming Control Unit For Four-Wheel Drive
          • Coding Control Unit For Four-Wheel Drive (PTM)
  • Driveshaft & Universal Joints
    • 39 - Final Drive - Differential, Differential Lock -- CARRERA (997)
      • WM 390219 Removing And Installing CARDAN Shaft (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Shaft
        • Installing Cardan Shaft
        • Subsequent Work
      • WM 390815 Adjusting The Ring Gear And Pinion Shaft (Gt2, Gt3, Gt2 RS & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Measuring The Differential (Total Shim Thickness S1 And S2)
        • Measuring And Adjusting The Output Shaft (Total Shim Thickness S4 And S5)
        • Measuring And Adjusting The Output Shaft (Total Shim Thickness S3)
        • Adjusting The Differential (Total Shim Thickness S1 And S2)
        • Adjusting Bevel Gear/Crown Wheel Pairing (Tooth Backlash)
        • Subsequent Work
      • WM 391555 Replacing Double Sealing Ring (All Models)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Double Sealing Ring
        • Installing Double Sealing Ring
        • Subsequent Work
      • 392219 - Removing And Installing Sealing Ring For Left HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Speedster, CARR. GTS Coupe & CARR. GTS CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Left Halfshaft Flange
        • Installing Sealing Ring For Left Halfshaft Flange
        • Subsequent Work
      • 392219 - Removing And Installing Sealing Ring For Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, "Sport Classic", CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster
        • Tools
        • Preliminary work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Short Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Right HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt3, Gt2 RS & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Sealing Ring For Right Halfshaft Flange
        • Installing Sealing Ring For Right Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Left HALFSHAFT Flange (Turbo Coupe, Turbo CABRIO, Gt2, Gt3, & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Sealing Ring For Left Halfshaft Flange
        • Installing Sealing Ring For Left Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Halfshaft Flange
        • Subsequent Work
      • WM 392219 Removing And Installing Sealing Ring For Short HALFSHAFT Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Short Halfshaft Flange
        • Installing Sealing Ring For Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Long HALFSHAFT Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Long Halfshaft Flange
        • Installing Long Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Long HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Long Halfshaft Flange
        • Installing Long Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Removing Front Halfshaft Flange
        • Installing Front Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Left HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS & Gt3)
        • Technical Values
        • Preliminary Work
        • Removing Left Halfshaft Flange
        • Installing Left Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Right HALFSHAFT Flange (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS & Gt3)
        • Technical Values
        • Preliminary Work
        • Removing Right Halfshaft Flange
        • Installing Right Halfshaft Flange
        • Subsequent Work
      • WM 392519 Removing And Installing Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, "Sport Classic", CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster)
        • Tools
        • Preliminary Work
        • Removing Short Halfshaft Flange
          • Removing Short Drive Shaft Flange
        • Installing Short Halfshaft Flange
          • Installing Short Drive Shaft Flange
        • Subsequent Work
      • WM 394019 Removing And Installing Differential With Differential Lock (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Differential With Differential Lock
        • Installing Differential With Differential Lock
        • Subsequent Work
      • WM 394037 Disassembling And Assembling Differential With Differential Lock (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Disassembling Differential With Differential Lock
          • Dismantling Differential And Differential Lock
        • Assembling Differential With Differential Lock
          • Assembling Differential And Differential Lock
        • Subsequent Work
      • WM 395819 Removing And Installing Cover For Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cover For Front Final Drive
          • Removing Cover For Final Drive
        • Installing Cover For Front Final Drive
          • Installing Cover For Final Drive
        • Subsequent Work
      • WM 395919 Removing And Installing Sealing Ring For Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Front Halfshaft Flange
        • Installing Sealing Ring For Front Halfshaft Flange
        • Subsequent Work
      • WM 396219 Removing And Installing Support For Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Support For Front Final Drive
        • Installing Support For Front Final Drive
        • Subsequent Work
          • Preliminary Work
      • WM 396219 Removing And Installing Support For Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Support For Front Final Drive
          • Removing Support For Final Drive
        • Installing Support For Front Final Drive
          • Installing Support For Final Drive
        • Subsequent Work
      • WM 396319 Removing And Installing Front HALFSHAFT Flange (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Preliminary Work
        • Removing Front Halfshaft Flange
        • Installing Front Halfshaft Flange
        • Subsequent Work
      • WM 396419 Removing And Installing CARDAN Flange (CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Flange
        • Installing Cardan Flange
        • Subsequent Work
      • WM 396419 Removing And Installing CARDAN Flange (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cardan Flange
          • Removing Cardan Flange - Automatic Transmission
          • Removing Cardan Flange - Manual Transmission
        • Installing Cardan Flange
          • Installing Cardan Flange - Automatic Transmission
          • Installing Cardan Flange - Manual Transmission
        • Subsequent Work
          • Subsequent Work - Automatic Transmission
          • Subsequent Work - Manual Transmission
      • WM 397919 Removing And Installing Electromagnetic Clutch (Turbo Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Electromagnetic Clutch
        • Installing Electromagnetic Clutch
        • Subsequent Work
      • WM 398219 Removing And Installing Sealing Ring For CARDAN Flange (CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Tools
        • Preliminary Work
        • Removing Sealing Ring For Cardan Flange
        • Installing Sealing Ring For Cardan Flange
        • Subsequent Work
      • WM 398819 Removing And Installing Four-Wheel Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Front Final Drive
        • Installing Front Final Drive
        • Subsequent Work
      • WM 3988TW Technical Data On Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO)
        • Technical Values
          • Overview
          • Notes
          • Transmission Ratio
          • Filling Capacities
      • WM 399035 Checking And Topping Up Oil For Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Checking And Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399035 Checking And Topping Up Oil For Final Drive (With Transmission Oil) (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
          • Notes
          • Checking And Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399035 Checking And Topping Up Oil For Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Information
        • Preliminary Work
        • Checking And Topping Up Oil For Front Final Drive
          • Checking And Topping Up Differential Oil For Front Final Drive
          • Checking And Topping Up Clutch Fluid For Front Final Drive
        • Subsequent Work
      • WM 399055 Changing Oil For Final Drive (With Transmission Oil) (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Changing Oil For Final Drive
          • Draining Oil For Final Drive
          • Subsequent Work
      • WM 399055 Changing Oil In Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
          • Overview
          • Filling Capacities
        • Information
        • Preliminary Work
        • Draining Oil For Front Final Drive
          • Draining Differential Oil For Front Final Drive
          • Draining Clutch Fluid For Front Final Drive
        • Filling In Oil For Front Final Drive
          • Filling In Differential Oil For Front Final Drive
          • Filling In Clutch Fluid For Front Final Drive
        • Subsequent Work
      • WM 399055 Changing Oil For Final Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
          • Overview
          • Filling Capacities
        • Information
        • Preliminary Work
        • Changing Oil For Final Drive
          • Notes
          • Topping Up Oil For Final Drive
        • Subsequent Work
      • WM 399519 Removing And Installing Control Unit For Four-Wheel Drive (PTM) (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Control Unit For Four-Wheel Drive (PTM)
        • Removing Control Unit For Four-Wheel Drive (PTM)
        • Installing Control Unit For Four-Wheel Drive (PTM)
        • Subsequent Work
          • Subsequent Work For Control Unit For Four-Wheel Drive (PTM)
          • Programming Control Unit For Four-Wheel Drive
          • Coding Control Unit For Four-Wheel Drive (PTM)
    • 40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997)
      • WM 400000 Lifting The Vehicle (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt3 RS)
        • Preliminary Work
          • Lifting The Vehicle
      • WM 4000IN Tests/Notes For All-Wheel Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Information For Four-Wheel Drive Vehicles
          • Balancing Wheels On Vehicle
          • Controlled Four-Wheel Drive (PTM) On The 911 Turbo
          • Power Measurements/Function Tests On The 911 Turbo
          • Power Measurements On The 911 Carrera 4/911 Carrera 4S
          • Brake Test
          • Handbrake Test On The 911 Turbo
          • Towing
      • WM 400119 Removing And Installing Front Axle (All Models)
        • Technical Values
        • Information
          • Component Overview
        • Preliminary Work
        • Removing And Installing Front Axle
          • Removing Front Axle
          • Installing Front Axle
          • Subsequent Work
      • WM 4001TW Tightening Torques For Front Axle (All Models)
        • Technical Values
        • Tightening Torques For Cross Member/Side Member (One Component)
        • Tightening Torques For Diagonal Brace
        • Tightening Torques For Axle Strut
        • Tightening Torques For Spring Strut
        • Tightening Torques For Wheel Carrier
        • Tightening Torques For Stabilizer
        • Tightening Torques For Steering
        • Tightening Torques For Wheel Mounting
      • WM 401719 Removing And Installing Lower Front-Axle Control Arm (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Notes
          • Removing Trailing Arm
        • Installing Trailing Arm
        • Subsequent Work
      • WM 401819 Removing And Installing Diagonal Arm (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Removing Diagonal Arm
        • Installing Diagonal Arm
      • WM 404119 Removing And Installing Front Drive Shaft (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Drive Shaft
          • Removing Front Drive Shaft
          • Installing Front Drive Shaft
        • Subsequent Work
      • WM 405019 Removing And Installing Front Wheel Bearing Housing (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • Preliminary Work
        • Removing Wheel Bearing Housing
        • Installing Wheel Bearing Housing
          • Notes
          • Fitting Front-Axle Control Arm, Left
          • Fitting Front-Axle Control Arm, Right
        • Subsequent Work
      • WM 405719 Removing And Installing Front Wheel Bearing (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing And Installing Front Wheel Bearing
          • Removing Front Wheel Bearing
          • Installing Front Wheel Bearing
        • Subsequent Work
      • WM 405055 Replacing Front Wheel Bearing Housing (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Replacing Front Wheel Bearing Housing - Preliminary Work
        • Removing Front Wheel Bearing Housing
        • Completing (Disassembling And Assembling) Wheel Bearing Housing
        • Installing Front Wheel Bearing Housing
        • Replacing Front Wheel Bearing Housing - Subsequent Work
      • WM 407819 Removing And Installing Connecting Link (Suspension/Stabilizer) (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO)
        • Removing Front Connecting Link (Suspension/Stabilizer)
          • Notes
          • Installing Front Connecting Link (Suspension/Stabilizer)
      • WM 408519 Removing And Installing Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Tools
        • Removing And Installing Spring Strut - Preliminary Work
        • Removing front Spring Strut
        • Installing Front Spring Strut
        • Removing And Installing Spring Strut - Subsequent Work
      • WM 408519 Removing And Installing Front Spring Strut (All Models)
        • Tools
        • Information
        • Preliminary Work
        • Removing Front Spring Strut
        • Installing Front Spring Strut
          • Notes
          • Fitting Front-Axle Control Arm, Left
          • Fitting Front-Axle Control Arm, Right
        • Subsequent Work
      • WM 408537 Disassembling And Assembling Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Tools
        • Information
          • Component And Assembly Overview (With And Without PASM)
        • Disassembling And Assembling Spring Strut
          • Disassembling Spring Strut
          • Coil Spring/Compensating Plate Allocation
          • Allocation Of Vibration Dampers
          • Assembling Spring Strut
      • WM 408537 Disassembling And Assembling Front Spring Strut (All Models)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
          • Disassembling Front Spring Strut
          • Preliminary Work And Notes On Assembly
          • Assembling Front Spring Strut
    • 42 - Rear Wheel Suspension, Drive Shafts -- CARRERA (997)
      • WM 4201TW Tightening Torques For Rear Axle (All Models)
        • Technical Values
        • Tightening Torques For Rear Axle
          • Tightening Torques For Carrier Side Section/Cross Member
        • Tightening Torques For Axle Strut
          • Notes
          • Tightening Torques For Wheel Carrier
          • Tightening Torques For Spring Strut
          • Tightening Torques For Stabilizer
          • Tightening Torques For Drive Shaft
          • Tightening Torques For Plug-In Couplings For Steering Hydraulics
          • Tightening Torques For Plug-In Couplings For Clutch Hydraulic System
          • Tightening Torques For Wheel Mounting
      • WM 422119 Removing And Installing Rear Drive Shaft (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing
          • Removing Rear Drive Shaft
        • Installing
          • Installing Rear Drive Shaft
        • Subsequent Work
          • Notes
          • Checking Wheel-Alignment Values
      • WM 422855 Replacing Bellows Drive Shaft (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Information
        • Replacing Bellows Drive Shaft
      • WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear-Axle Carrier Side Section
          • Removing Rear-Axle Carrier Side Section
          • Installing Rear-Axle Carrier Side Section
          • Subsequent Work
      • WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Wheel Bearing Housing
        • Installing Wheel Bearing Housing
        • Subsequent Work
      • WM 425819 Removing And Installing Rear Wheel Bearing (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Rear Wheel Bearing
        • Installing Rear Wheel Bearing
        • Subsequent Work
      • WM 427119 Removing And Installing Rear Spring Strut (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing And Installing Spring Strut - Preliminary Work
        • Removing Spring Strut
        • Installing Spring Strut
        • Removing And Installing Spring Strut - Subsequent Work
      • WM 427137 Disassembling And Assembling Rear Spring Strut (911 Gt3 RS, 911 Gt2, 911 Gt3)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Assembling Rear Spring Strut
      • WM 427137 Disassembling And Assembling Rear Spring Strut - With And Without PASM (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Information
          • Component And Assembly Overview (With And Without PASM)
          • Disassembling Rear Spring Strut
          • Coil Spring/Compensating Plate Allocation
          • Rear Vibration Damper Allocation
          • Assembling Spring Strut
      • WM 427137 Disassembling And Assembling Rear Spring Strut - As Of 2010 Model (911 Gt3, 911 Gt3 RS)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Preliminary Work And Notes On Assembly
          • Coil Spring/Compensating Plate Allocation
          • Assembling Rear Spring Strut
      • WM 429019 Removing And Installing Rear Anti-Roll Bar (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Anti-Roll Bar
        • Installing Anti-Roll Bar
      • WM 429155 Replacing Connecting Link (Suspension/Stabilizer) (911 Gt3, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing And Installing Rear Connecting Link (Suspension/Stabilizer)
          • Removing Rear Connecting Link (Suspension/Stabilizer)
          • Installing Rear Connecting Link (Suspension/Stabilizer)
  • Wheel Hubs
    • 40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997)
      • WM 400000 Lifting The Vehicle (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt3 RS)
        • Preliminary Work
          • Lifting The Vehicle
      • WM 4000IN Tests/Notes For All-Wheel Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Information For Four-Wheel Drive Vehicles
          • Balancing Wheels On Vehicle
          • Controlled Four-Wheel Drive (PTM) On The 911 Turbo
          • Power Measurements/Function Tests On The 911 Turbo
          • Power Measurements On The 911 Carrera 4/911 Carrera 4S
          • Brake Test
          • Handbrake Test On The 911 Turbo
          • Towing
      • WM 400119 Removing And Installing Front Axle (All Models)
        • Technical Values
        • Information
          • Component Overview
        • Preliminary Work
        • Removing And Installing Front Axle
          • Removing Front Axle
          • Installing Front Axle
          • Subsequent Work
      • WM 4001TW Tightening Torques For Front Axle (All Models)
        • Technical Values
        • Tightening Torques For Cross Member/Side Member (One Component)
        • Tightening Torques For Diagonal Brace
        • Tightening Torques For Axle Strut
        • Tightening Torques For Spring Strut
        • Tightening Torques For Wheel Carrier
        • Tightening Torques For Stabilizer
        • Tightening Torques For Steering
        • Tightening Torques For Wheel Mounting
      • WM 401719 Removing And Installing Lower Front-Axle Control Arm (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Notes
          • Removing Trailing Arm
        • Installing Trailing Arm
        • Subsequent Work
      • WM 401819 Removing And Installing Diagonal Arm (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Removing Diagonal Arm
        • Installing Diagonal Arm
      • WM 404119 Removing And Installing Front Drive Shaft (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Drive Shaft
          • Removing Front Drive Shaft
          • Installing Front Drive Shaft
        • Subsequent Work
      • WM 405019 Removing And Installing Front Wheel Bearing Housing (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • Preliminary Work
        • Removing Wheel Bearing Housing
        • Installing Wheel Bearing Housing
          • Notes
          • Fitting Front-Axle Control Arm, Left
          • Fitting Front-Axle Control Arm, Right
        • Subsequent Work
      • WM 405719 Removing And Installing Front Wheel Bearing (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing And Installing Front Wheel Bearing
          • Removing Front Wheel Bearing
          • Installing Front Wheel Bearing
        • Subsequent Work
      • WM 405055 Replacing Front Wheel Bearing Housing (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Replacing Front Wheel Bearing Housing - Preliminary Work
        • Removing Front Wheel Bearing Housing
        • Completing (Disassembling And Assembling) Wheel Bearing Housing
        • Installing Front Wheel Bearing Housing
        • Replacing Front Wheel Bearing Housing - Subsequent Work
      • WM 407819 Removing And Installing Connecting Link (Suspension/Stabilizer) (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO)
        • Removing Front Connecting Link (Suspension/Stabilizer)
          • Notes
          • Installing Front Connecting Link (Suspension/Stabilizer)
      • WM 408519 Removing And Installing Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Tools
        • Removing And Installing Spring Strut - Preliminary Work
        • Removing front Spring Strut
        • Installing Front Spring Strut
        • Removing And Installing Spring Strut - Subsequent Work
      • WM 408519 Removing And Installing Front Spring Strut (All Models)
        • Tools
        • Information
        • Preliminary Work
        • Removing Front Spring Strut
        • Installing Front Spring Strut
          • Notes
          • Fitting Front-Axle Control Arm, Left
          • Fitting Front-Axle Control Arm, Right
        • Subsequent Work
      • WM 408537 Disassembling And Assembling Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Tools
        • Information
          • Component And Assembly Overview (With And Without PASM)
        • Disassembling And Assembling Spring Strut
          • Disassembling Spring Strut
          • Coil Spring/Compensating Plate Allocation
          • Allocation Of Vibration Dampers
          • Assembling Spring Strut
      • WM 408537 Disassembling And Assembling Front Spring Strut (All Models)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
          • Disassembling Front Spring Strut
          • Preliminary Work And Notes On Assembly
          • Assembling Front Spring Strut
    • 42 - Rear Wheel Suspension, Drive Shafts -- CARRERA (997)
      • WM 4201TW Tightening Torques For Rear Axle (All Models)
        • Technical Values
        • Tightening Torques For Rear Axle
          • Tightening Torques For Carrier Side Section/Cross Member
        • Tightening Torques For Axle Strut
          • Notes
          • Tightening Torques For Wheel Carrier
          • Tightening Torques For Spring Strut
          • Tightening Torques For Stabilizer
          • Tightening Torques For Drive Shaft
          • Tightening Torques For Plug-In Couplings For Steering Hydraulics
          • Tightening Torques For Plug-In Couplings For Clutch Hydraulic System
          • Tightening Torques For Wheel Mounting
      • WM 422119 Removing And Installing Rear Drive Shaft (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing
          • Removing Rear Drive Shaft
        • Installing
          • Installing Rear Drive Shaft
        • Subsequent Work
          • Notes
          • Checking Wheel-Alignment Values
      • WM 422855 Replacing Bellows Drive Shaft (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Information
        • Replacing Bellows Drive Shaft
      • WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear-Axle Carrier Side Section
          • Removing Rear-Axle Carrier Side Section
          • Installing Rear-Axle Carrier Side Section
          • Subsequent Work
      • WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Wheel Bearing Housing
        • Installing Wheel Bearing Housing
        • Subsequent Work
      • WM 425819 Removing And Installing Rear Wheel Bearing (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Rear Wheel Bearing
        • Installing Rear Wheel Bearing
        • Subsequent Work
      • WM 427119 Removing And Installing Rear Spring Strut (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing And Installing Spring Strut - Preliminary Work
        • Removing Spring Strut
        • Installing Spring Strut
        • Removing And Installing Spring Strut - Subsequent Work
      • WM 427137 Disassembling And Assembling Rear Spring Strut (911 Gt3 RS, 911 Gt2, 911 Gt3)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Assembling Rear Spring Strut
      • WM 427137 Disassembling And Assembling Rear Spring Strut - With And Without PASM (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Information
          • Component And Assembly Overview (With And Without PASM)
          • Disassembling Rear Spring Strut
          • Coil Spring/Compensating Plate Allocation
          • Rear Vibration Damper Allocation
          • Assembling Spring Strut
      • WM 427137 Disassembling And Assembling Rear Spring Strut - As Of 2010 Model (911 Gt3, 911 Gt3 RS)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Preliminary Work And Notes On Assembly
          • Coil Spring/Compensating Plate Allocation
          • Assembling Rear Spring Strut
      • WM 429019 Removing And Installing Rear Anti-Roll Bar (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Anti-Roll Bar
        • Installing Anti-Roll Bar
      • WM 429155 Replacing Connecting Link (Suspension/Stabilizer) (911 Gt3, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing And Installing Rear Connecting Link (Suspension/Stabilizer)
          • Removing Rear Connecting Link (Suspension/Stabilizer)
          • Installing Rear Connecting Link (Suspension/Stabilizer)
• Electrical
  • Body Electrical
    • 2X - Petrol, Exhaust, Engine-Electronic -- CARRERA (997)
      • WM 2X00IN Basic Safety Instructions For Working With Lead-Acid Batteries (Applies To All Models)
        • Dangers Caused By Electrolyte When Filling Lead-Acid Batteries
          • Dangers For Persons
          • Dangers For The Environment
        • Dangers When Charging Lead-Acid Batteries
          • Dangers For Persons
        • Dangers Caused By Short Circuit
          • Dangers For Persons
        • Personal Protective Equipment
          • Personal Protective Equipment
      • WM 2X00IN Technical Data On Fuel, Exhaust Gas, Engine Electrics (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO)
        • Information
          • Fuel
          • Engine Electronics
          • Intake System
          • Exhaust System
          • Ignition System
      • WM 2X00IN Basic Information On The Lightweight Battery (Lithium-Ion Battery) (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
          • General Information
          • Technical Data
          • Properties Of The Battery
          • Limitations
          • Escaping Fluids
          • Maintenance And Care
            • Notes
            • Warning Tone
            • Storing The Vehicle
          • Information On Charging The Battery
            • Notes
            • Suitable Chargers
          • Transport And Recycling
            • Notes
            • Transport
            • Recycling
      • WM 2X00IN Electrical Emergency Release, Front Lid (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Electrical Emergency Release, Front Lid
      • WM 2X00IN Work Instructions After Disconnecting The Battery (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Gt3, Gt2, Gt3 RS)
        • Technical Values
        • Disconnecting And Connecting The Battery
          • Notes
          • Effect Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And The Precautions To Be Taken
          • Test Drive After Disconnecting Battery
      • WM 2X00IN Battery Trickle Charging (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS,)
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Checking Battery Charging Condition With Battery Tester
        • Reworking
    • 9X - Electrical System - General -- CARRERA (997)
      • WM 9X00IN Measurement Of Closed-Circuit Current (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO)
        • Tools
        • Tools And Materials
          • Tools
        • Measurement Of Closed-Circuit Current
          • Preliminary Work On Vehicle
          • Testing
      • WM 9X00IN Optical WAVEGUIDE (LWL) - Most Bus (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Optical Waveguide (LWL) - MOST Bus
          • Requirements When Working With LWL
          • Storage, Packing, Transport
          • Installing The LWL In The Vehicle
          • Repair
          • Push-On Connector - Dust Boots
          • Control Unit Plug Connector (Wiring Harness Side)
          • Push-On Connector - Connection Points
          • Optical Fiber (LWL) - Module
          • Optical Waveguide Variants
        • Removing Optical Contacts On Connector Side
        • Installing Optical Contacts On Connector Side
        • Removing And Installing Optical Contacts On Socket Side
        • Installing Optical Contacts On Socket Side
  • Component Locations
    • Diagnostic Connector (DLC) Locations
      • Domestic Cars
        • CHRYSLER Group LLC
        • Ford Motor Co.
        • General Motors
      • Domestic Light Trucks & Vans
        • CHRYSLER Group LLC
        • Ford Motor Co.
        • General Motors
      • Imported Cars & Trucks
        • ACURA
        • AUDI
        • BENTLEY
        • BMW
        • DAIHATSU
        • CHRYSLER Group LLC
        • FERRARI
        • Ford Motor Co.
        • General Motors
        • HONDA
        • HYUNDAI
        • INFINITI
        • ISUZU
        • Jaguar
        • KIA
        • Land Rover
        • LEXUS
        • MAZDA
        • MERCEDES-BENZ
        • MITSUBISHI
        • NISSAN
        • PEUGEOT
        • PORSCHE
        • RENAULT
        • Rolls-ROYCE
        • SAAB
        • SUBARU
        • SUZUKI
        • TOYOTA
        • VOLKSWAGEN
        • VOLVO
    • Electrical Component Locator
      • Buzzers, Relays & Timers
      • Circuit Protection Devices
      • Control Units
      • Motors
      • Sending Units & Sensors
      • Solenoids & Solenoid Valves
      • Switches
      • Miscellaneous
      • Connectors
      • Grounds
      • Component Location Graphics
  • Gauges
    • 90 - Instruments, Alarm System -- CARRERA (997)
      • WM 900319 Removing And Installing Dashboard Insert (Applies To All Models Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO And Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For The Dashboard Insert
        • Removing Dashboard Inset
        • Installing Dashboard Inset
        • Subsequent Work
          • Subsequent Work For The Dashboard Insert
      • WM 902219 Removing And Installing Stopwatch (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, 911 Gt2 RS)
        • Tools
        • Technical Values
        • Removing Stopwatch
        • Installing Stopwatch
        • Programming Stopwatch
          • Reading Out And Writing Stopwatch Values
          • Coding Stopwatch
      • WM 902519 Removing And Installing Instrument Cluster (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Technical Values
        • General Warning Notes
          • General Warnings For Instrument Cluster
        • Preliminary Work
          • Preliminary Work For Instrument Cluster
        • Removing Instrument Cluster
        • Installing Instrument Cluster
        • Subsequent Work
          • Reworking Instrument Cluster
        • Programming Instrument Cluster
          • Reading and Printing Values
          • Programming The Instrument Cluster
      • WM 903519 Removing And Installing Gateway Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Gateway Control Unit
        • General Warning Notes
          • General Warnings For Gateway Control Module
        • Removing Gateway Control Unit
        • Installing Gateway Control Unit
        • Subsequent Work
          • Subsequent Work For Gateway Control Unit
        • Coding Gateway Control Unit
          • Coding The Gateway Control Unit
          • Programming Gateway Control Unit
      • WM 905019 Removing And Installing Horn (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Horn
        • Removing Horn
        • Installing Horn
        • Subsequent Work
          • Subsequent Work On Horn
      • WM 905819 Installing And Removing Socket (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2)
        • Preliminary Work
          • Preliminary Work For Passenger's Footwell Socket
          • Preliminary Work For Center Console Socket
        • Removing Socket
          • Removing Passenger's Footwell Socket
          • Removing Center Console Socket
        • Installing Socket
          • Installing Passenger's Footwell Socket
          • Installing The Center Console Socket
        • Subsequent Work
          • Subsequent Work For Passenger's Footwell Socket
          • Reworking The Centre Console Socket
      • WM 906219 Removing And Installing Cigar Lighter (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Preliminary Work
          • Preliminary Work For Cigar Lighter
        • Removing Cigar Lighter
        • Installing Cigar Lighter
        • Subsequent Work
          • Removing The Cigar Lighter
  • Motors, Switches, Relays
    • 2X - Petrol, Exhaust, Engine-Electronic -- CARRERA (997)
      • WM 2X00IN Basic Safety Instructions For Working With Lead-Acid Batteries (Applies To All Models)
        • Dangers Caused By Electrolyte When Filling Lead-Acid Batteries
          • Dangers For Persons
          • Dangers For The Environment
        • Dangers When Charging Lead-Acid Batteries
          • Dangers For Persons
        • Dangers Caused By Short Circuit
          • Dangers For Persons
        • Personal Protective Equipment
          • Personal Protective Equipment
      • WM 2X00IN Technical Data On Fuel, Exhaust Gas, Engine Electrics (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO)
        • Information
          • Fuel
          • Engine Electronics
          • Intake System
          • Exhaust System
          • Ignition System
      • WM 2X00IN Basic Information On The Lightweight Battery (Lithium-Ion Battery) (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
          • General Information
          • Technical Data
          • Properties Of The Battery
          • Limitations
          • Escaping Fluids
          • Maintenance And Care
            • Notes
            • Warning Tone
            • Storing The Vehicle
          • Information On Charging The Battery
            • Notes
            • Suitable Chargers
          • Transport And Recycling
            • Notes
            • Transport
            • Recycling
      • WM 2X00IN Electrical Emergency Release, Front Lid (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Electrical Emergency Release, Front Lid
      • WM 2X00IN Work Instructions After Disconnecting The Battery (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Gt3, Gt2, Gt3 RS)
        • Technical Values
        • Disconnecting And Connecting The Battery
          • Notes
          • Effect Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And The Precautions To Be Taken
          • Test Drive After Disconnecting Battery
      • WM 2X00IN Battery Trickle Charging (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS,)
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Checking Battery Charging Condition With Battery Tester
        • Reworking
    • 9X - Electrical System - General -- CARRERA (997)
      • WM 9X00IN Measurement Of Closed-Circuit Current (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO)
        • Tools
        • Tools And Materials
          • Tools
        • Measurement Of Closed-Circuit Current
          • Preliminary Work On Vehicle
          • Testing
      • WM 9X00IN Optical WAVEGUIDE (LWL) - Most Bus (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Optical Waveguide (LWL) - MOST Bus
          • Requirements When Working With LWL
          • Storage, Packing, Transport
          • Installing The LWL In The Vehicle
          • Repair
          • Push-On Connector - Dust Boots
          • Control Unit Plug Connector (Wiring Harness Side)
          • Push-On Connector - Connection Points
          • Optical Fiber (LWL) - Module
          • Optical Waveguide Variants
        • Removing Optical Contacts On Connector Side
        • Installing Optical Contacts On Connector Side
        • Removing And Installing Optical Contacts On Socket Side
        • Installing Optical Contacts On Socket Side
  • 27 - Starter, Power Supply, Cruise Control -- CARRERA (997)
    • WM 2700TW Technical Data, Engine Electronics (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. 4 Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO)
      • Technical Values
        • Overview
        • Engine Electronics
        • Engine Electronics Tightening Torques
    • WM 2706IN External Power Connection, Jump Lead Starting (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
      • Preliminary Work
        • Preliminary Work For External Power Connection, Jump Lead Starting
      • General Warning Notes
        • Warning Notes For External Power Connection, Jump Lead Starting
      • Information
        • External Power Connection
        • Jump Lead Starting
      • Subsequent Work
        • Rework On External Power Connection, Jump Lead Starting
    • WM 270601 Checking Battery With Battery Tester (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
      • Checking Battery With Battery Tester
    • WM 270601 Checking The Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • General Warning Notes
        • General Warning Notes For The Battery
      • Battery Handling Requirements
        • Low-Maintenance Battery
      • Battery Central Venting
      • Visual Inspection Of Battery
      • Checking Acid Level Of Low-Maintenance Battery
      • Checking Gravity Of Electrolyte
      • Open-Circuit Voltage Measurement
      • Battery Load Test
      • Charging Battery
    • WM 270619 Removing And Installing Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • Technical Values
      • Removing Battery
      • Installing Battery
      • Subsequent Work
        • Subsequent Work - Battery
    • WM 270655 Replacing Lead-Acid Battery With Lithium-Ion Battery (911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
      • Technical Values
      • Removing Lead-Acid Battery
      • Installing Lithium-Ion Battery
    • WM 270689 Battery Trickle Charging (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
      • Preliminary Work
      • General Warning Notes
      • Tools And Materials
      • Checking Battery Charging Condition With Battery Tester
      • Reworking
    • WM 2706IN Electrical Emergency Release For Lid (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
      • Electrical Emergency Release, Front Lid
    • WM 2706IN External Power Connection, Jump Lead Starting (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • Preliminary Work
        • Preliminary Work For External Power Connection, Jump Lead Starting
      • General Warning Notes
        • Warning Notes For External Power Connection, Jump Lead Starting
      • Information
        • External Power Connection
        • Jump Lead Starting
      • Subsequent Work
        • Rework On External Power Connection, Jump Lead Starting
    • WM 2706IN Work Instructions After Disconnecting The Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • Technical Values
      • Disconnecting And Connecting The Battery
      • Effect Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And The Precautions To Be Taken
        • Notes
        • Control Unit Memories
        • Supply Voltage Fault Entry
        • Ready Status
        • 2470 DME Control Module
        • Tyre Pressure Monitoring System
        • 4560 Steering Angle Sensor
        • Motor For Sunroof
        • 6452 Power Windows
        • 9025 Instrument Cluster
        • Airbag Control Module
        • On-Board Computer
        • Pcm
        • Test Drive After Disconnecting Battery
        • Effects Of Overvoltage On Electrical And Electronic Systems During Welding Work And The Precautions To Be Taken
    • WM 271219 Removing And Installing Battery Cover (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • Technical Values
      • Removing Battery Cover
      • Installing Battery Cover
      • Subsequent Work
        • Reworking If Cowl Panel Cover Deformed
    • WM 272219 Removing And Installing Generator (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
      • Technical Values
      • Preliminary Work
      • Removing Generator
      • Installing Generator
      • Subsequent Work
    • WM 272219 Removing And Installing Generator (Except 911 Turbo Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
      • Technical Values
      • Preliminary Work
      • Removing Generator
      • Installing Generator
      • Subsequent Work
    • WM 272219 Removing And Installing The Generator (911 Gt3, 911 Gt3 RS)
      • Technical Values
      • Preliminary Work
        • Preliminary Work For Generator
      • Removing The Generator
      • Installing The Generator
      • Subsequent Work
        • Subsequent Work For Generator
    • WM 276019 Removing And Installing Starter (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
      • Technical Values
      • Preliminary Work
      • Removing Starter
      • Installing Starter
      • Subsequent Work
    • WM 276019 Removing And Installing Starter (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
      • Technical Values
      • Preliminary Work
      • Removing Starter
      • Installing Starter
      • Subsequent Work
    • WM 276019 Removing And Installing Starter (911 Gt3, 911 Gt3 RS)
      • Technical Values
      • Preliminary Work
        • Preliminary Work For Starter
      • Removing The Starter
        • Removing Starter
      • Installing The Starter
      • Subsequent Work
        • Subsequent Work For Starter
  • Wiring Diagrams
    • System Wiring Diagrams
      • Using lemon2025'S Wiring Diagrams
      • Air Conditioning
      • Anti-Lock Brakes
      • Anti-Theft
      • Body Control Modules
      • Computer Data Lines
      • Cooling Fan
      • Cruise Control
      • Defoggers
      • Electronic Muffler
      • Electronic Suspension
      • Engine Performance
        • 3.6L
        • 3.8L
      • Exterior Lights
      • Ground Distribution
      • Headlights
      • Horn
      • Instrument Cluster
      • Interior Lights
      • Memory Systems
      • Navigation
      • Power Distribution
      • Power Door Locks
      • Power Mirrors
      • Power Seats
      • Power Top/Sunroof
      • Power Windows
      • Radio
      • Shift Interlock
      • Starting/Charging
      • Supplemental Restraints
      • Transmission
      • Trunk, Tailgate, Fuel Door
      • Warning Systems
      • Wiper/Washer
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
• Engine Mechanical
  • Blowers, Superchargers & Turbochargers
    • 21 - Exhaust Gas Turbocharging -- CARRERA (997)
      • WM 211019 Removing And Installing Air Guide For Charge Air Cooler (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO
        • Technical Values
        • Preliminary Work
        • Removing Air Guide For Charge Air Cooler
        • Installing Air Guide For Charge Air Cooler
        • Subsequent Work
      • WM 213019 Removing And Installing Turbocharger (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Turbocharger
          • Removing Turbocharger For Cylinder Bank 1-3
          • Removing Turbocharger For Cylinder Bank 4-6
        • Installing Turbocharger
          • Installing Turbocharger For Cylinder Bank 1-3
          • Installing Turbocharger For Cylinder Bank 4-6
        • Subsequent Work
      • WM 213019 Removing And Installing Turbocharger (Gt2 RS)
        • Technical Values
        • Information
          • Component overview
        • Preliminary Work
        • Removing Turbocharger
          • Removing Turbocharger For Cylinder Bank 1-3
          • Removing Turbocharger For Cylinder 4-6
        • Installing Turbocharger
          • Installing Turbocharger For Cylinder 1-3
          • Installing Turbocharger For Cylinder 4-6
        • Subsequent Work
      • WM 2130N0 Greasing Ball Joints On Adjustment Mechanism (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Greasing Ball Joints
      • WM 214019 Removing And Installing Recirculating Air Valve - Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Component Information
        • Removing Recirculating Air Valve
        • Installing Recirculating Air Valve
        • Subsequent Work
      • WM 214119 Removing And Installing Pressure Pipe (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Removing Pressure Pipe
          • Component overview
        • Installing Pressure Pipe
      • WM 214119 Removing And Installing Pressure Pipe (Gt2 RS)
        • Technical values
        • Information
          • Overview
          • Removing Pressure Pipe
        • Installing Pressure Pipe
          • Installing Pressure Pipe
      • WM 214319 Removing And Installing Charge Air Cooler (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Charge Air Cooler
        • Installing Charge Air Cooler
        • Subsequent Work
      • WM 214319 Removing And Installing Charge-Air Cooler (Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Charge-Air Cooler
        • Installing Charge-Air Cooler
        • Subsequent Work
      • WM 216420 Removing And Installing Exhaust Temperature Sensors (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Exhaust Temperature Sensors
        • Installing Exhaust Temperature Sensors
        • Subsequent Work
      • WM 216420 Removing And Installing Exhaust Temperature Sensor (Gt2 RS)
        • Technical Values
        • Information
          • Installation Overview
        • Preliminary Work
        • Removing Exhaust Temperature Sensor
          • Removing Exhaust Temperature Sensor
        • Installing Exhaust Temperature Sensor
          • Installing Exhaust Temperature Sensor
        • Subsequent Work
      • WM 216619 Removing And Installing Electronic Adjuster For Turbocharger (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Electronic Adjuster
          • Removing Electronic Adjuster - Cylinder Bank 1-3
          • Removing Electronic Adjuster - Cylinder Bank 4-6
        • Installing Electronic Adjuster For Turbocharger
          • Installing Electronic Adjuster - Cylinder Bank 1-3
          • Installing Electronic Adjuster - Cylinder Bank 4-6
        • Subsequent Work
      • WM 216619 Removing And Installing Electronic Adjuster For Turbocharger (Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Turbocharger Electronic Adjuster
          • Removing Electronic Adjuster For Turbocharger, Cylinder Bank 1-3
          • Removing Electronic Adjuster For Turbocharger, Cylinder Bank 4-6
        • Installing Turbocharger Electronic Adjuster
          • Installing Electronic Adjuster For Turbocharger, Cylinder Bank 1-3
          • Installing Electronic Adjuster For Turbocharger, Cylinder Bank 4-6
        • Subsequent Work
      • WM 216655 Replacing Actuating Rod For Turbocharger Electronic Adjuster (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Removing Actuating Rod For Turbocharger Electronic Adjuster
        • Installing Actuating Rod For Turbocharger Electronic Adjuster
      • WM 217119 Removing And Installing Oil Feed Line (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil Feed Line
          • Removing Oil Feed Line - Cylinder Bank 1-3
          • Removing Oil Feed Line - Cylinders 4-6
        • Installing Oil Feed Line
          • Installing Oil Feed Line - Cylinder Bank 1-3
          • Installing Oil Feed Line - Cylinder Bank 4-6
        • Subsequent Work
      • WM 217119 Removing And Installing Oil Pressure Line For Turbocharger (Gt2 RS)
        • Tools
        • Technical Values
        • Preliminary Work
          • Overview Of Lines
        • Removing Oil Pressure Line
          • Removing Oil Pressure Line On Cylinder Bank 1-3
          • Removing Oil Pressure Line On Cylinder Bank 4-6
        • Installing Oil Pressure Line
          • Installing Oil Pressure Line - Cylinder Bank 1-3
          • Installing Oil Pressure Line - Cylinder Bank 4-6
        • Subsequent Work
      • WM 217119 Removing And Installing Oil Pressure Line For Turbocharger (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
          • Overview Of Lines
        • Removing Oil Pressure Line
          • Removing Oil Pressure Line - Cylinder Bank 1-3
          • Removing Oil Pressure Line - Cylinder Bank 4-6
        • Installing Oil Pressure Line
          • Installing Oil Pressure Line - Cylinder Bank 1-3
          • Installing Oil Pressure Line - Cylinder Bank 4-6
        • Subsequent Work
      • WM 217519 Removing And Installing Turbocharger Oil Tank (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Turbocharger Oil Tank
        • Installing Turbocharger Oil Tank
        • Subsequent Work
      • WM 217519 Removing And Installing Turbocharger Oil Tank (Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing And Installing Turbocharger Oil Tank
          • Removing Turbocharger Oil Tank
        • Installing Turbocharger Oil Tank
        • Subsequent Work
      • WM 217819 Removing And Installing Oil Return Line For Turbocharger (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Oil Return Line
        • Installing Oil Return Line
        • Subsequent Work
      • WM 217820 Removing And Installing Oil Return Line (Gt2 RS)
        • Technical Values
        • Information
          • Overview Of Oil Return Lines
        • Preliminary Work
        • Removing Oil Return Line
          • Removing Oil Return Line 1-3
          • Removing Oil Return Line 4-6
        • Installing Oil Return Line
          • Installing Oil Return Line 1-3
          • Installing Oil Return Line 4-6
        • Subsequent Work
      • WM 217820 Removing And Installing Oil Return Line (Turbo Coupe, Turbo CABRIO & Gt2)
        • Technical Values
        • Information
          • Overview Of Oil Return Lines
        • Preliminary Work
        • Removing Oil Return Line
          • Notes
          • Removing Oil Return Line 4-6
        • Installing Oil Return Line
          • Installing Oil Return Line 1-3
          • Installing Oil Return Line 4-6
        • Subsequent Work
  • Cooling System (Mechanical)
    • 19 - Engine - Cooling -- CARRERA (997)
      • WM 1901TW Technical Data, Engine Cooling (Turbo Coupe, Turbo CABRIO, Gt3 & Gt3 RS)
        • Technical Values
          • Engine Cooling
      • WM 190101 Checking Cooling System (Gt2 RS, Gt3 And Gt3 RS)
        • Tools
        • Checking Cooling System
          • Checking Coolant Antifreeze Content And Fluid Level
          • Checking For Coolant Leaks
          • Cleaning The Cooling Air Guides
      • WM 190101 Checking Cooling System (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO, Speedster)
        • Tools
        • Checking
          • Tools
          • Checking Coolant Antifreeze Content And Fluid Level
          • Checking For Coolant Leaks
          • Checking Lid (On Reservoir)
          • Cleaning The Cooling Air Guides
      • WM 190101 Checking Cooling System (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Tools
        • Checking Cooling System
          • Checking Coolant Antifreeze Content And Fluid Level
          • Checking The Antifreeze Content Using A Refractometer
        • Checking For Coolant Leaks
          • Notes
          • Cleaning The Cooling Air Guides
      • WM 190819 Removing And Installing Electric Fan (Turbo Coupe & Turbo CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Removing Electric Fan
        • Removal
          • Removing Electric Fan (With Frame)
          • Installing Electric Fan (With Frame)
          • Subsequent Work For Installing Electric Fan
      • WM 192419 Removing And Installing Air Guide (Turbo Coupe & Turbo CABRIO)
        • Preliminary Work
          • Preliminary Work For Removing Air Guide
        • Removing Air Guide
          • Removing Air Guide For Middle Radiator
          • Removing Air Guide For Side Radiator
        • Subsequent Work
          • Subsequent Work For Installing Air Guide
      • WM 192419 Removing And Installing Air Guide For Radiator (CARR. Coupe, CARR. S Coupe, CARR. GTS Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Speedster)
        • Preliminary Work
          • Preliminary Work For Removing Air Guide
        • Removing Air Guide
          • Removing Air Guide For Middle Radiator
          • Removing Air Guide For Side Radiator
        • Installing Air Guide
          • Installing Air Guide For Middle Radiator
          • Installing Air Guide For Side Radiator
        • Subsequent work
          • Subsequent Work For Installing Air Guide
      • WM 192419 Removing And Installing Air Guide (Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Air Guide
        • Installing Air Guide
        • Subsequent Work
      • WM 193817 Draining And Filling In Coolant (Includes Bleeding The System) (CARR. Coupe, CARR. S Coupe, CARR. GTS Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Speedster)
        • Tools
        • Technical Values
        • Preliminary Work
        • Draining
          • Draining Coolant
          • Coolant Hoses At The Underbody - Draining Additional Coolant
        • Filling In
          • Filling Coolant (Includes Bleeding)
        • Subsequent Work
      • WM 193817 Draining And Filling Coolant (Includes Bleeding) (Gt2, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Draining Coolant
        • Filling Coolant And Bleeding The System
        • Subsequent Work
      • WM 194019 Removing And Installing Coolant Reservoir (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Coolant Reservoir
          • Removing Reservoir For Coolant
        • Installing Coolant Reservoir
        • Subsequent Work
      • WM 194019 Removing And Installing Coolant Reservoir (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Coolant Reservoir
          • Removing Reservoir For Coolant
        • Installing Coolant Reservoir
        • Subsequent Work
      • WM 194019 Removing And Installing Coolant Tank (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • Removing Coolant Tank
          • Removing Reservoir For Coolant
        • Installing Coolant Tank
          • Installing Reservoir For Coolant
        • Subsequent Work
      • WM 194519 Removing And Installing Additional Coolant Pump (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview Of Additional Coolant Pump
        • Preliminary Work
        • Removing Additional Coolant Pump
        • Installing Additional Coolant Pump
        • Subsequent Work
      • WM 195019 Removing And Installing Coolant Pump (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Coolant Pump
        • Installing Coolant Pump
        • Subsequent Work
      • WM 195019 Removing And Installing Coolant Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO
        • Technical Values
        • Preliminary Work
        • Removing Coolant Pump
        • Installing Coolant Pump
        • Subsequent Work
      • WM 195519 Removing And Installing Housing For Coolant Regulator (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Coolant Regulator Housing
            • Component Overview
          • Replacing Inner Sealing Ring For Coolant Regulator
        • Installation
          • Installing housing for coolant regulator
            • Component Overview
        • Subsequent Work
      • WM 195819 Removing And Installing Coolant Regulator (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Coolant Regulator
            • Component Overview
        • Installation
          • Installing Coolant Regulator
            • Component Overview
        • Subsequent Work
      • WM 195819 Removing And Installing Coolant Regulator (Gt2 RS, Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removing Coolant Regulator
        • Installing Coolant Regulator
        • Subsequent Work
      • WM 195919 Removing And Installing Coolant Distributor Housing (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • Removing Coolant Distributor Housing
        • Installing Coolant Distributor Housing
        • Subsequent Work
      • WM 195919 Removing And Installing Unit Carrier (Coolant Distributor Housing) (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Unit Carrier (Coolant Distributor Housing)
        • Installing Unit Carrier (Coolant Distributor Housing)
        • Subsequent Work
      • WM 195919 Removing And Installing Unit Carrier (Coolant Distributor Housing) (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Unit Carrier (Coolant Distributor Housing)
        • Installing Unit Carrier (Coolant Distributor Housing)
        • Subsequent Work
      • WM 197019 Removing And Installing Radiator (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Radiator
          • Removing Left Radiator
          • Removing Right Radiator
        • Installing Radiator
          • Installing Left Radiator
          • Installing Right Radiator
        • Subsequent Work
      • WM 197019 Removing And Installing Radiator (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
          • Preliminary Work For Removing Radiator
        • Removal
          • Removing Left Radiator
          • Removing Right Radiator
        • Installation
          • Installing Left Radiator
          • Installing Right Radiator
        • Subsequent Work
          • Subsequent Work For Installing Radiator
      • WM 197019 Removing And Installing Dirt Deflector For Radiator (Turbo Coupe & Turbo CABRIO)
        • Preliminary Work
        • Removing Dirt Deflector
          • Marking On Dirt Deflector For Installation Position
        • Installing Dirt Deflector
        • Subsequent Work
      • WM 197819 Removing And Installing Coolant Temperature Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Coolant Temperature Sensor
        • Installing Coolant Temperature Sensor
        • Subsequent Work
      • WM 197819 Removing And Installing Coolant Temperature Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Coolant Temperature Sensor
        • Installing Coolant Temperature Sensor
        • Subsequent Work
      • WM 198019 Removing And Installing Middle Radiator (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Middle Radiator
        • Installing Middle Radiator
        • Subsequent Work
      • WM 198019 Removing And Installing Middle Radiator (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Removing Middle Radiator
        • Removal
          • Removing Middle Radiator
        • Installation
          • Installing Middle Radiator
        • Subsequent work
          • Subsequent Work For Installing Middle Radiator
  • 26 - Exhaust System -- CARRERA (997)
    • WM 2601IN Components And Arrangement Of Exhaust System (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Technical Values
      • Components And Arrangement Of Exhaust System
    • WM 260101 Leak Test For Exhaust System (Turbo Coupe & Turbo CABRIO)
      • Leak Test
    • WM 261019 Removing And Installing Exhaust Manifold With Catalytic Converter (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Technical Values
      • Preliminary Work
      • Removal
        • Removing Exhaust Manifold
        • Repair Solution - Replacing Threaded Bolts On Three-Hole Flange
      • Installation
        • Installing Exhaust Manifold
        • Tightening Specifications For Exhaust Manifold With Catalytic Converter
      • Subsequent Work
    • WM 260119 Removing And Installing Exhaust System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Exhaust System
      • Installing Exhaust System
      • Subsequent Work
    • WM 260119 Removing And Installing Exhaust System (Gt2 & Gt2 RS)
      • Technical Values
      • Preliminary Work
      • Removing Exhaust System
        • Notes
        • Component Overview
      • Installing Exhaust System
      • Subsequent Work
    • WM 2601TW Technical Data, Exhaust System (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
      • Exhaust System And Emission Control
    • WM 261019 Removing And Installing Exhaust Manifold (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Technical Values
      • Preliminary Work
      • Removing Exhaust Manifold
        • Removing Exhaust Manifold - Cylinder Bank 1-3
        • Removing Exhaust Manifold - Cylinder Bank 4-6
      • Installing Exhaust Manifold
        • Installing Exhaust Manifold - Cylinder Bank 1-3
        • Installing Exhaust Manifold - Cylinder Bank 4-6
      • Subsequent Work
    • WM 261019 Removing And Installing Exhaust Manifold With Catalytic Converter (Gt3 & Gt3 RS)
      • Technical Values
      • Preliminary Work
      • Removing Exhaust Manifold With Catalytic Converter
      • Installing Exhaust Manifold With Catalytic Converter
      • Subsequent Work
    • WM 261219 Removing And Installing Heat Shield (All Models)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removal
        • Removing Heat Shield - Upper Part Only
        • Removing Heat Shield - Lower Part
      • Installation
        • Installing Heat Shield - Lower Part
        • Installing Heat Shield - Upper Part Only
      • Subsequent Work
    • WM 261219 Removing And Installing Heat Shield (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Heat Shield
        • Removing Heat Shield On Cylinder Bank 1-3
        • Removing Heat Shield On Cylinder Bank 4-6
      • Installing Heat Shield
        • Installing Heat Shield On Cylinder Bank 1-3
        • Installing Heat Shield On Cylinder Bank 4-6
      • Subsequent Work
    • WM 261219 Removing And Installing Heat Shield (Gt2 RS)
      • Technical Values
      • Preliminary Work
      • Removing Heat Shield
      • Installing Heat Shield
      • Subsequent Work
    • WM 261220 Removing And Installing Cover Plate (Turbo Coupe & Turbo CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Cover Plate
        • Removing Heat Shield
      • Installing Cover Plate
        • Installing Heat Shield
      • Subsequent Work
    • WM 262519 Removing And Installing Front Silencer (Gt3, Gt3 RS & Gt3 RS 4.0)
      • Technical Values
      • Preliminary Work
      • Removing Front Silencer
      • Installing Front Silencer
      • Subsequent Work
    • WM 262519 Removing And Installing Front Silencer (Gt3 & Gt3 RS)
      • Technical Values
      • Preliminary Work
      • Removing Front Silencer
      • Installing Front Silencer
      • Subsequent Work
    • WM 261319 Removing And Installing Cover Plate For Exhaust Manifold (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Technical Values
      • Removal
        • Loosening Front Silencer
        • Component Overview
        • Removing Exhaust Manifold With Catalytic Converter
        • Removing Cover Plate For Exhaust Manifold
      • Installation
        • Installing Cover Plate For Exhaust Manifold
        • Installing Exhaust Manifold With Catalytic Converter
        • Tightening Specifications For Exhaust Manifold With Catalytic Converter
        • Securing Front Silencer
    • WM 263319 Removing And Installing Rear Silencer (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removal
        • Removing Rear Silencer
        • Component Overview For Rear Silencer
      • Installation
        • Installing Rear Silencer
      • Subsequent Work
    • WM 263319 Removing And Installing Rear Silencer (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Rear Silencer - Turbo
      • Installing Rear Silencer - Turbo
      • Subsequent Work
    • WM 263319 Removing And Installing Rear Silencer (Gt3 & Gt3 RS)
      • Technical Values
      • Preliminary Work
      • Removing Rear Silencer
      • Installing Rear Silencer
      • Subsequent Work
    • WM 263341 Repairing Rear Silencers (Gt3, Gt3 RS & Gt3 RS 4.0)
      • Tools
      • Technical Values
      • Preliminary Work
      • Repairing Rear Silencers - Replacing Threaded Pin
        • Replacing Threaded Bolts
      • Subsequent Work
    • WM 263519 Removing And Installing Tailpipe Cover (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Technical Values
      • Removal
        • Removing Tailpipe Cover
      • Installation
        • Installing Tailpipe Cover
    • WM 263519 Removing And Installing Tailpipe Cover (CARR. Coupe "Edition Style", CARR. CABRIO "Edition Style", CARR. GTS CABRIO, CARR. GTS Coupe & Speedster)
      • Technical Values
      • Removing Tailpipe Cover
        • Removing Tailpipe Cover - Speedster/Classic
      • Installing Tailpipe Cover
        • Installing Tailpipe Cover - Speedster/Classic
    • WM 265102 Checking Vacuum Units For Exhaust Flaps (Gt3 & Gt3 RS)
      • Checking Vacuum Units For Exhaust Flaps
        • Checking Control Boxes For Exhaust Flaps
    • WM 265119 Removing And Installing Vacuum Unit For Exhaust Flap (Gt3 & Gt3 RS)
      • Technical Values
      • Removing Vacuum Unit
        • Removing Control Box
      • Installing Vacuum Unit
        • Installing Control Box
    • WM 266519 Removing And Installing Secondary-Air Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Component Information
      • Removing Secondary-Air Pump
      • Installing Secondary-Air Pump
      • Subsequent Work
    • WM 266519 Removing And Installing Secondary-Air Pump (Gt3, Gt3 RS & Gt3 RS 4.0)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Secondary-Air Pump
      • Installation
        • Installing Secondary-Air Pump
      • Subsequent Work
    • WM 266519 Removing And Installing Secondary-Air Pump (Turbo Coupe & Turbo CABRIO)
      • Tools
      • Technical Values
      • Information
        • Overview
      • Preliminary Work
      • Removing Secondary-Air Pump
      • Installing Secondary-Air Pump
      • Subsequent Work
    • WM 266919 Removing And Installing Shut-Off Valve (Turbo Coupe & Turbo CABRIO)
      • Tools
      • Technical Values
        • Notes
        • Overview Of Shut-Off Valve
      • Preliminary Work
      • Removing Shut-Off Valve
        • Removing Shut-Off Valve, Side 1-3
        • Removing Shut-Off Valve, Side 4-6
      • Installing Shut-Off Valve
        • Installing Shut-Off Valve, Side 1-3
        • Installing Shut-Off Valve, Side 4-6
      • Subsequent Work
    • WM 267319 Removing And Installing Catalytic Converter (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Catalytic Converter
        • Removing Catalytic Converter - Cylinder Bank 1-3
        • Removing Catalytic Converter - Cylinder Bank 4-6
      • Installing Catalytic Converter
        • Installing Catalytic Converter - Cylinder Bank 1-3
        • Installing Catalytic Converter - Cylinder Bank 4-6
      • Subsequent Work
    • WM 267319 Removing And Installing Catalytic Converter (Gt2 & Gt2 RS)
      • Technical Values
      • Preliminary Work
      • Removing Catalytic Converter
        • Removing Catalytic Converter 1-3
        • Component Overview
        • Removing Catalytic Converter 4-6
        • Installing Catalytic Converter
      • Subsequent Work
  • Fuel System
    • 20 - Fuel Supply, Control -- CARRERA (997)
      • WM 200101 Checking Fuel System (High-Pressure Side) For Leaks (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
          • Requirements
        • Checking
          • Component Overview
          • Overview Of Fuel System In Engine Compartment
          • Leak Test On High-Pressure Side
        • Subsequent Work
      • WM 200101 Checking Fuel System (High-Pressure Side) For Leaks (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
          • Requirements
        • Checking
          • Component Overview
          • Overview Of Fuel System In Engine Compartment
          • Leak Test On High-Pressure Side
        • Subsequent Work
      • WM 2001IN Bleeding Fuel System On High-Pressure Side (First Start Function) (All Models)
        • Tools
        • Information
          • Explanation Of First Start Function
        • Bleeding High-Pressure System
          • Performing First Start Routine
      • WM 2001IN Technical Data, Fuel System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
          • Technical Data, Fuel System
          • Fuel System
      • WM 2001AW Basic Safety Instructions For Working With The Fuel System (All Models)
        • Safety Instructions
          • Safety Instructions When Working On The Fuel System
      • WM 2001TW Technical Data, Fuel System (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Technical Values
          • Technical Data, Fuel System
          • Fuel System
      • WM 200201 Checking Fuel Pressure (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Tools
        • Checking Fuel Pressure
          • Notes
          • Fuel System Holding Pressure
      • WM 200201 Checking Fuel Pressure In The Low-Pressure System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Tools And Materials
        • Checking Fuel Pressure
          • Checking Fuel Pressure - Engine Stopped
          • Checking Fuel Pressure - Engine Idling
        • Subsequent Work
      • WM 200201 Checking Fuel Pressure In The Low-Pressure System (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Fuel Pressure
          • Checking Fuel Pressure - Engine Stopped
          • Checking Fuel Pressure - Engine Idling
        • Subsequent Work
      • WM 200301 Checking Fuel Quality (All Models)
        • Tools
        • Tools And Materials
        • Checking Fuel Quality
          • Checking Fuel Quality
      • WM 200317 Draining And Filling Fuel (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Tools And Materials
        • Information
        • Preliminary Work
        • Draining Fuel
          • Draining Fuel - RoW Variant
          • Draining Fuel - USA Variant
        • Filling Fuel
          • Filling Fuel - RoW Variant
          • Filling Fuel - USA Variant
        • Subsequent Work
      • WM 200317 Draining And Filling Fuel (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Tools And Materials
        • Information
        • Preliminary Work
          • Preliminary Work - Carrera 2
        • Draining Fuel
          • Draining Fuel - Carrera 2
        • Filling Fuel
          • Filling Fuel - Carrera 2
        • Subsequent work
          • Subsequent Work - Carrera 2
      • WM 200719 Removing And Installing Filler Neck (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Filler Neck
        • Installing Filler Neck
        • Subsequent Work
      • WM 200719 Removing And Installing Filler Neck (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary work
        • Removing Filler Neck
        • Installing Filler Neck
        • Subsequent Work
      • WM 2010EN Emptying And Filling The Fuel Tank (All Models)
        • Tools
        • Technical Values
        • Preliminary work
        • Emptying The Fuel Tank
          • Notes
          • Device Connections
        • Filling The Fuel Tank
        • Subsequent Work
      • WM 2015IN Calibrating Fuel-Level Sensor System (All Models)
        • Warning Notes For Calibrating Fuel-Level Sensor System
        • Calibrating Fuel-Level Sensor System - Carrera 4, Turbo, 4 GTS, GT3, GT2
        • Calibrating Fuel-Level Sensor System - C4, Turbo, 4 GTS, GT3, GT2
      • WM 201019 Removing And Installing Fuel Tank (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
          • Component Information
            • Overview
        • Removing Fuel Tank
        • Installing Fuel Tank
        • Subsequent Work
      • WM 201019 Removing And Installing Fuel Tank (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Carrera 2
          • Preliminary Work - Carrera 4
        • Removing Fuel Tank
          • Removing Fuel Tank - Carrera 2
          • Removing Fuel Tank - Carrera 4
        • Installing Fuel Tank
          • Installing Fuel Tank - Carrera 2
          • Installing Fuel Tank - Carrera 4
        • Subsequent Work
          • Subsequent Work - Carrera 2
          • Subsequent Work - Carrera 4
      • WM 201519 Removing And Installing Fuel Level Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Fuel Level Sensor
        • Installing Fuel Level Sensor
        • Subsequent Work
      • WM 201519 Removing And Installing Fuel Level Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Carrera 2
          • Preliminary Work - Carrera 4
        • Removing Fuel Level Sensor
          • Removing Fuel Level Sensor - Carrera 2
          • Removing Fuel Level Sensor - Carrera 4
        • Installing Fuel Level Sensor
          • Installing Fuel Level Sensor - Carrera 2
          • Installing Fuel Level Sensor - Carrera 4
        • Subsequent Work
          • Subsequent Work - Carrera 2
          • Subsequent Work - Carrera 4
      • WM 202319 Removing And Installing Tank Vent Valve (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Component Information
        • Removing Tank Vent Valve
        • Installing Tank Vent Valve
        • Subsequent Work
      • WM 202319 Removing And Installing Tank Vent (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Component Information
        • Removing Tank Vent
        • Installing Tank Vent
        • Subsequent Work
      • WM 202519 Removing And Installing Carbon Canister (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - RoW Variant
          • Preliminary Work - USA Variant
        • Removing Carbon Canister
          • Removing carbon canister - RoW variant
          • Removing carbon canister - USA variant
        • Installing Carbon Canister
          • Installing Carbon Canister - RoW Variant
          • Installing Carbon Canister - USA Variant
        • Subsequent Work
          • Subsequent Work - RoW Variant
          • Subsequent Work - USA Variant
      • WM 202519 Removing And Installing Carbon Canister (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - RoW Variant
          • Preliminary Work - USA Variant
        • Removing Carbon Canister
          • Removing Carbon Canister - RoW Variant
          • Removing Carbon Canister - USA Variant
        • Installing Carbon Canister
          • Installing Carbon Canister - RoW Variant
          • Installing Carbon Canister - USA Variant
        • Subsequent Work
          • Subsequent Work - RoW Variant
          • Subsequent Work - USA Variant
      • WM 202519 Removing And Installing Carbon Canister (All Models)
        • Tools
        • Technical Values
        • Preliminary Work For Carbon Canister
        • Removing Carbon Canister
          • Removing Carbon Canister - RoW Version
          • Removing Carbon Canister - USA Version
        • Installing Carbon Canister
          • Installing Carbon Canister - RoW Version
          • Installing Carbon Canister - USA Version
        • Subsequent Work For Carbon Canister
      • WM 204819 Removing And Installing Leakage Diagnosis Pump (All Models)
        • Preliminary Work
        • Removal
          • Removing Leakage Diagnosis Pump
        • Installation
          • Installing Leakage Diagnosis Pump
        • Subsequent Work
      • WM 206019 Removing And Installing Fine Fuel Filter (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Removing Fuel Filter
        • Installing Fuel Filter
      • WM 206601 Checking Delivery Rate Of Electric Fuel Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Delivery Rate Of Electric Fuel Pump
        • Subsequent Work
      • WM 206601 Checking Delivery Rate Of Electric Fuel Pump (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking
          • Checking Delivery Rate Of Electric Fuel Pump
        • Subsequent Work
      • WM 206601 Checking Quantity Delivered By Fuel Pump (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Tools
        • Preliminary Work
        • Checking Delivery Rate
        • Subsequent Work
      • WM 206619 Removing And Installing Fuel Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Fuel Pump
        • Installing Fuel Pump
        • Subsequent Work
      • WM 206619 Removing And Installing Fuel Pump (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Carrera 2
          • Preliminary Work - Carrera 4
        • Removing Fuel Pump
          • Removing Fuel Pump - Carrera 2
          • Removing Fuel Pump - Carrera 4
        • Installing Fuel Pump
          • Installing Fuel Pump - Carrera 2
          • Installing Fuel Pump - Carrera 4
        • Subsequent Work
          • Subsequent Work - Carrera 2
          • Subsequent Work - Carrera 4
      • WM 206819 Removing And Installing Fuel Cooler (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions When Working On The Fuel System
        • Removing Fuel Cooler
        • Installing Fuel Cooler
        • Subsequent Work
      • WM 207019 Control Unit For Fuel Pump (All Models)
        • Preliminary work
          • Preliminary Work For Control Unit For Fuel Pump
        • Removing Control Unit For Fuel Pump
        • Installing Control Unit For Fuel Pump
        • Subsequent Work
          • Subsequent Work For Control Unit For Fuel Pump
      • WM 208019 Removing And Installing Accelerator Pedal (All Models)
        • Information
        • Removing Accelerator Pedal
          • Removing
        • Installing Accelerator Pedal
          • Installing
    • 24 - Fuel System - Electronic Ignition -- CARRERA (997)
      • WM 2400AW Precautionary Measures When Handling Oxygen Sensors (All Models)
        • Precautionary Measures When Handling Oxygen Sensors
      • WM 2400IN Technical Data - Fuel System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
          • Fuel System
      • WM 242419 Removing And Installing Air-Cleaner Element (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Removal
          • Removing Air-Cleaner Element
        • Installation
          • Installing Air-Cleaner Element
      • WM 242419 Removing And Installing Air-Cleaner Element (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Removing Air-Cleaner Element
        • Installing Air-Cleaner Element
      • WM 242419 Removing And Installing Air-Cleaner Element (Gt2 RS)
        • Removing Air-Cleaner Element
        • Installing Air-Cleaner Element
      • WM 242420 Removing And Installing Air-Cleaner Element (Gt3, Gt3 RS & Gt3 RS 4.0)
        • Technical Values
        • Removing Air-Cleaner Element
          • Removing Air-Cleaner Element
        • Installing Air-Cleaner Element
          • Installing Air-Cleaner Element
      • WM 242519 Removing And Installing Air Cleaner Housing (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Removing Air Cleaner Housing
          • Notes
          • Disassembling And Assembling Air Cleaner Housing
        • Installing Air Cleaner Housing
      • WM 242519 Removing And Installing Air Cleaner Housing (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Air Cleaner Housing
        • Installing Air Cleaner Housing
        • Subsequent Work
      • WM 242519 Removing And Installing Air Cleaner Housing (Gt2 RS)
        • Removing Air Cleaner Housing
        • Installing Air Cleaner Housing
      • WM 243019 Removing And Installing Fuel Collection Pipe With Fuel Injectors (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Preliminary Work
        • Component Overview
          • Notes
          • Overview Of Fuel System In Engine Compartment
        • Removing Fuel Collection Pipe With Fuel Injectors
        • Installing Fuel Collection Pipe With Fuel Injectors
        • Subsequent Work
      • WM 243019 Removing And Installing Fuel Collection Pipe With Fuel Injectors (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
          • Component Overview
          • Overview Of Fuel System In Engine Compartment
        • Removal
          • Removing Fuel Collection Pipe With Fuel Injectors
          • Cleaning Fuel Injectors And Replacing Wearing Parts
            • Component overview
        • Installation
          • Tightening Specifications For Fuel Collection Pipe And Fuel Line
          • Installing Fuel Collection Pipe With Fuel Injectors
        • Subsequent Work
      • WM 244001 Checking Fuel Injector (All Models
        • Tools
        • Preliminary Work
        • Tools And Materials
        • Checking Fuel Injector
        • Subsequent Work
      • WM 244020 Removing And Installing Fuel Injectors (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions When Working On The Fuel System
        • Removing Fuel Injectors
          • Removing Fuel Injectors - Cylinder Bank 1-3
        • Removing Fuel Injectors - Cylinder Bank 4-6
        • Installing Fuel Injectors
          • Installing Fuel Injectors - Cylinder Bank 1-3
          • Installing Fuel Injectors - Cylinder Bank 4-6
        • Subsequent Work
      • WM 244219 Removing And Installing Throttle Housing (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Throttle Housing
        • Installing Throttle Housing
        • Subsequent Work
      • WM 244219 Removing And Installing Throttle Housing (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Throttle Housing
        • Installing Throttle Housing
        • Subsequent Work
      • WM 244219 Removing And Installing Throttle Housing (Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Throttle Housing
          • Removing Throttle Housing
        • Installing Throttle Housing
          • Installing Throttle Housing
        • Subsequent Work
      • WM 244519 Removing And Installing Hot-Film Mass Air Flow Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Mass Air Flow Sensor
        • Installation
          • Installing Mass Air Flow Sensor
        • Subsequent Work
      • WM 244601 Checking Intake-Air Distributor For Leaks (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking
          • Checking Intake-Air Distributor For Leaks
        • Subsequent Work
      • WM 244601 Checking The Intake-Air Distributor For Leaks (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Preliminary Work
        • Checking
          • Checking Intake-Air Distributor For Leaks
        • Subsequent Work
      • WM 244619 Removing And Installing Intake-Air Distributor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Intake-Air Distributor
          • Component Overview 1
          • Component Overview 2: Intake-Air Distributor Disassembled
        • Installing Intake-Air Distributor
        • Subsequent Work
      • WM 244619 Removing And Installing Intake-Air Distributor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
          • Component Overview For Intake-Air Distributor
        • Removal
          • Removing Intake-Air Distributor - Side 1-3
          • Removing Intake-Air Distributor - Side 4-6
        • Installation
          • Tightening Sequence
          • Installing Intake-Air Distributor - Side 1-3
          • Installing Intake-Air Distributor - Side 4-6
        • Subsequent Work
      • WM 244619 Removing And Installing Intake-Air Distributor (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Intake-Air Distributor
        • Installing Intake-Air Distributor
        • Subsequent Work
      • WM 244619 Removing And Installing Intake-Air Distributor (Gt2 RS)
        • Tools
        • Technical Values
        • Information
          • Component Overview
        • Preliminary Work
        • Removing Intake-Air Distributor
          • Removing Center Intake-Air Distributor
          • Removing Intake-Air Distributor, Side 1-3
          • Removing Intake-Air Distributor, Side 4-6
        • Installing Intake-Air Distributor
          • Installing Intake-Air Distributor, Side 1-3
          • Installing Intake-Air Distributor, Side 4-6
          • Installing Center Intake-Air Distributor
        • Subsequent Work
      • WM 244620 Removing And Installing Intake-Air Distributor (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • General Warning Notes
          • Danger From Fuel
          • Hot Engine Components
        • Removing Intake-Air Distributor
          • Removing Center Intake-Air Distributor
          • Removing Intake-Air Distributor, Side 1-3
          • Removing Intake-Air Distributor, Side 4-6
        • Installing Intake-Air Distributor
          • Installing Intake-Air Distributor, Side 1-3
          • Installing Right Intake-Air Distributor
          • Installing Centre Intake-Air Distributor
        • Subsequent Work
      • WM 244637 Disassembling And Assembling Intake-Air Distributor (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
        • Technical Values
        • Preliminary Work
        • Disassembling Intake-Air Distributor
          • Notes
          • Component Overview
        • Assembling Intake-Air Distributor
          • Notes
          • Component Overview
        • Subsequent Work
      • WM 247019 Removing And Installing DME (DFI) Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Speedster, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information: Adaptation Of The DME (DFI) Control Unit
        • Preliminary Work
          • Preliminary Work For DME (DFI) Control Unit
        • Removing DME (DFI) Control Unit
        • Installing DME (DFI) Control Unit
        • Subsequent Work
          • Subsequent Work For DME (DFI) Control Unit
        • Programming DME (DFI) Control Unit
          • Notes
          • Programming DME (DFI) Control Unit
      • WM 244719 Removing And Installing Intake Manifold (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
        • Technical values
        • Preliminary Work
        • Removing Intake Manifold
          • Remove Intake Manifold - (Cylinder Bank 1-3)
          • Remove Intake Manifold - (Cylinder Bank 4-6)
        • Installing Intake Manifold
          • Install Intake Manifold - (Cylinder Bank 1-3)
          • Install Intake Manifold - (Cylinder Bank 4-6)
        • Subsequent Work
      • WM 246319 Removing And Installing High-Pressure Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing High-Pressure Pump
          • Notes
          • Component Overview
        • Installing High-Pressure Pump
        • Subsequent Work
      • WM 246319 Removing And Installing High-Pressure Pump (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing High-Pressure Pump
        • Installing High-Pressure Pump
        • Subsequent Work
      • WM 246919 Removing And Installing Oxygen Sensor Upstream Of Catalytic Converter (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oxygen Sensor Upstream Of Catalytic Converter
        • Installing Oxygen Sensor Upstream Of Catalytic Converter
        • Subsequent Work
      • WM 246919 Removing And Installing Oxygen Sensors Upstream Of Catalytic Converter (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Oxygen Sensor Upstream Of Catalytic Converter
        • Installation
          • Installing Oxygen Sensor Upstream Of Catalytic Converter
        • Subsequent work
      • WM 246919 Removing And Installing Lambda Sensor Upstream Of Catalytic Converter (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Lambda Sensor Upstream Of Catalytic Converter
        • Installing Lambda Sensor Upstream Of Catalytic Converter
        • Subsequent Work
      • WM 247019 Removing And Installing DME (DFI) Control Unit (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt2 RS)
        • Tools
        • Technical Values
        • Information: Adaptation Of The DME (DFI) Control Unit
        • Preliminary Work
          • Preliminary Work For DME (DFI) Control Unit
        • Removing DME (DFI) Control Unit
        • Installing DME (DFI) Control Unit
        • Subsequent Work
          • Subsequent Work For DME (DFI) Control Unit
        • Programming DME (DFI) Control Unit
          • Programming New DME (DFI) Control Unit
          • Programming DME (DFI) Control Unit
      • WM 247019 Removing And Installing DME Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Tools
        • Technical Values
        • Information: Adaptation Of The DME (DFI) Control Unit
        • Preliminary Work
          • Preliminary Work For DME (DFI) Control Unit
        • Removing DME (DFI) Control Unit
        • Installing DME (DFI) Control Unit
        • Subsequent Work
          • Subsequent Work For DME (DFI) Control Unit
        • Programming DME (DFI) Control Unit
          • Programming New DME (DFI) Control Unit
          • Programming DME (DFI) Control Unit
      • WM 247019 Removing And Installing DME Control Unit (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
          • Subsequent Work On DME Control Unit
        • General Warning Notes
          • General Warning Notes For Control Units
        • Removing DME Control Unit
          • Removing DME Control Module
        • Installing DME Control Unit
          • Installing DME Control Module
        • Subsequent Work
          • Subsequent Work On DME Control Unit
        • Programming DME Control Unit
          • Programming New DME Control Unit
          • Programming DME Control Unit
      • WM 247319 Removing And Installing Oxygen Sensor Downstream Of Catalytic Converter (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oxygen Sensor Downstream Of Catalytic Converter
        • Installing Oxygen Sensor Downstream Of Catalytic Converter
        • Subsequent Work
      • WM 247319 Removing And Installing Oxygen Sensors (LS) Behind Catalytic Converter (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Oxygen Sensor
        • Installation
          • Installing Oxygen Sensor
        • Subsequent Work
      • WM 247319 Removing And Installing Lambda Sensor Downstream Of Catalytic Converter (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Lambda Sensor Downstream Of Catalytic Converter
        • Installing Lambda Sensor Downstream Of Catalytic Converter
        • Subsequent Work
      • WM 248019 Removing And Installing Intake Manifold Pressure Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Intake Manifold Pressure Sensor
        • Installing Intake Manifold Pressure Sensor
        • Subsequent Work
      • WM 247419 Removing And Installing Resonance Tube (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Resonance Tube
        • Installation
          • Installing Resonance Tube
        • Subsequent Work
      • WM 247419 Removing And Installing Tuning Pipe (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Removing Tuning Pipe
        • Removing Tuning Pipe
        • Installing Tuning Pipe
        • Subsequent Work
          • Work Subsequent To Installing Tuning Pipe
      • WM 248302 Leak-Testing The Vacuum System (Gt3, Gt3 RS & Gt3 RS 4.0)
        • Tools
        • Leak-Testing The Vacuum System
  • Lubrication System
    • 17 - Engine - Lubrication -- CARRERA (997)
      • WM 1700TW Technical Data, Lubrication System (All Models)
        • Technical Values
          • Engine Lubrication
      • WM 170101 Checking Engine-Oil Level (Except Gt2 RS)
        • Tools
        • Technical Values
        • Checking Oil Level
          • Checking Engine-Oil Level - Display In Instrument Cluster
          • Checking Engine-Oil Level Using The PIWIS Tester
      • WM 170101 Checking Engine-Oil Level (Gt2 RS)
        • Checking Engine-Oil Level
      • WM 170101 Eliminating Symptoms On Body Exterior: Checking Engine-Oil Level ("Blue Smoke" From Engine) (All Models)
        • Tools
        • General Information
          • Symptom
          • Causes And Remedial Action
        • Tools And Materials
        • Checking Engine-Oil Level
        • Working Time
      • WM 170155 Changing Engine Oil And Oil Filter (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Technical Values
        • Draining Engine Oil
        • Changing Oil Filter
        • Filling In Engine Oil
      • WM 170155 Changing Engine Oil And Oil Filter (Except Gt2 RS & Turbo Models)
        • Technical Values
        • Draining Engine Oil
          • Notes
          • Changing Oil Filter
        • Filling In Engine Oil
      • WM 170155 Changing Engine Oil And Oil Filter (Gt2 RS)
        • Tools
        • Technical Values
        • Draining Engine Oil
        • Removing Oil Filter
        • Installing Oil Filter
        • Filling Engine Oil
      • WM 170301 Checking Engine Oil Pressure (All Models)
        • Tools
        • Technical Values
        • Checking Engine Oil Pressure
      • WM 170419 Removing And Installing Oil-Pressure Sender (Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • Removing Oil-Pressure Sender
        • Installing Oil-Pressure Sender
        • Subsequent Work
      • WM 170419 Removing And Installing Oil-Pressure Sender - Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil-Pressure Sender
        • Installing Oil-Pressure Sender
        • Subsequent Work
      • WM 170419 Removing And Installing Oil-Pressure Sender (Gt2 RS)
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • Removing Oil-Pressure Sender
        • Installing Oil-Pressure Sender
        • Subsequent Work
      • WM 170919 Removing And Installing Oil-Level Sender (Turbo Coupe & Turbo CABRIO
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • Removing Oil-Level Sender
        • Installing Oil-Level Sender
        • Subsequent Work
      • WM 171519 Removing And Installing Oil Filler Neck (Turbo Coupe, Turbo CABRIO & Gt2
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • Removing Oil Filler Neck
        • Installing Oil Filler Neck
        • Subsequent Work
      • WM 171519 Removing And Installing Oil Filler Neck (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Oil Filler Neck
        • Installing Oil Filler Neck
        • Subsequent Work
      • WM 170155 Changing Engine Oil And Oil Filter (Gt3, Gt3 RS & Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Draining Engine Oil
        • Removing Oil Filter
        • Installing Oil Filter
        • Filling Engine Oil
      • WM 170301 Checking Engine Oil Pressure (Gt3)
        • Tools
        • Technical Values
        • Checking Engine Oil Pressure
        • Installing Oil Filter Cover
      • WM 171919 Removing And Installing Oil Suction Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Overview
        • Removing Oil Suction Pump
          • Removing Oil Suction Pump - Cylinder Bank 4-6
          • Removing Tandem Pump - Cylinder Bank 1-3
        • Installing Oil Suction Pump
          • Installing Oil Suction Pump - Cylinder Bank 4-6
          • Installing Tandem Pump - Cylinder Bank 1-3
        • Subsequent Work
      • WM 172019 Removing And Installing Oil Pump (Except Gt2 & Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil Pump
          • Notes
          • Removing Oil Guide (Oil Plate)
        • Installing Oil Pump
          • Installing Oil Guide (Oil Plate)
          • Installing Oil Pump
        • Subsequent Work
      • WM 172619 Removing And Installing Oil Pressure Control Valve (Except Gt2 & Gt3)
        • Tools
        • Preliminary Work
        • Component Information
        • Removing Oil Pressure Control Valve
        • Installing Oil Pressure Control Valve
        • Subsequent Work
      • WM 172619 Removing And Installing Oil Pressure Control Valve (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Preliminary Work
        • Component Information
        • Removing Oil Pressure Control Valve
          • Notes
          • Installing Oil Pressure Control Valve
        • Subsequent Work
      • WM 173319 Removing And Installing Oil-Filter Console (Turbo Coupe, Turbo CABRIO & Gt2)
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • Removing Oil-Filter Console
        • Installing Oil-Filter Console
        • Subsequent Work
      • WM 174019 Removing And Installing Oil/Water Heat EXCHANGER (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Information
          • Overview
        • Preliminary Work
        • Removing Oil/Water Heat Exchanger
          • Removing Large Oil/Water Heat Exchanger
          • Removing Small Oil/Water Heat Exchanger
        • Installing Oil/Water Heat Exchanger
          • Installing Large Oil/Water Heat Exchanger
          • Installing Small Oil/Water Heat Exchanger
        • Subsequent Work
      • WM 174019 Removing And Installing Oil/Water Heat EXCHANGER (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Oil/Water Heat Exchanger
        • Installing Oil/Water Heat Exchanger
          • Installing Oil/Water Heat Exchanger
        • Subsequent Work
      • WM 170419 Removing And Installing Oil-Pressure Sender (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • Removing Oil-Pressure Sender
        • Installing Oil-Pressure Sender
        • Subsequent Work
      • WM 175019 Removing And Installing Oil Pan (All Models)
        • Tools
        • Preliminary Work
        • Removal
          • Removing Oil Pan (Lower Part)
          • Removing Oil Pan (Upper Part)
        • Installation
          • Installing Oil Pan (Upper Part)
          • Installing Oil Pan (Lower Part)
        • Subsequent Work
      • WM 175219 Removing And Installing Oil Tank (Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Oil Tank
        • Installation
          • Installing Oil Tank
        • Subsequent Work
      • WM 176719 Removing And Installing Bracket For Oil/Water Heat EXCHANGER (Except Gt3, Gt3 RS & Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Bracket For Oil/Water Heat Exchanger
        • Installing Bracket For Oil/Water Heat Exchanger
        • Subsequent Work
      • WM 176719 Removing And Installing Bracket For Oil Cooler (Gt3, Gt3 RS & Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
          • Component Overview
            • Bracket For Oil Filter And Oil/Water Heat Exchanger
        • Removing Bracket
        • Installing Bracket
        • Subsequent Work
  • Mechanical
    • 10 - Engine - Crankcase, Suspension -- CARRERA (997)
      • WM 100119 Removing And Installing Engine (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Engine
        • Installing Engine
        • Subsequent Work
      • WM 100119 Removing And Installing Engine (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Remove Engine
        • Install Engine
        • Subsequent Work
      • WM 100119 Removing And Installing Engine (Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Engine
        • Installing Engine
        • Subsequent Work
      • WM 1001IN Position And Marking Of Engine Number (All Models)
        • Tools
        • Information
          • Position of engine number
          • Engine number marking
      • WM 1001IN Tools For Removing Units And Working On The Engine Assembly Support (All Models)
        • Tools
        • Information
          • Individual Components And Setup For Removing Units
            • Master Gear unit elevating platform WE 1206
          • Transporting The Engine In The Workshop
          • Mounting Engine On Assembly Support
      • WM 1001TW Tightening Torques For Engine - Crankcase, Suspension (All Models)
        • Information
          • Tightening Torques For Crankcase
          • Engine Sensors
      • WM 1001Z1 Disassembling Engine - Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Disassembling Engine
      • WM 1001Z1 Disassembling The Engine (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
          • Tools And Materials
        • Preliminary Work
        • Disassembly
          • Disassembling The Engine
      • WM 1001Z2 Assembling Engine - Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Assembly
          • Assembling Engine
        • Subsequent Work
      • WM 1001Z2 Assembling The Engine (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Assembly
          • Assembling The Engine
        • Subsequent Work
      • WM 100137 Disassembling And Assembling Engine (Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
        • Disassembling Engine Down To Cylinder Housing
          • Disassembling Engine
        • Assembling Engine - Starting With Cylinder Housing
          • Assembling Engine
        • Subsequent Work
      • WM 100137 Disassembling And Assembling Engine (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO & Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
        • Disassembling Engine Down To Cylinder Housing
          • Disassembling Engine
        • Assembling Engine - Starting With Cylinder Housing
          • Assembling Engine
        • Subsequent Work
      • WM 100137 Disassembling And Assembling Engine (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt3)
        • Tools
        • Technical Values
        • Preliminary Work For Disassembling Engine
        • Component Overview - Engine
        • Disassembling Engine Down To Crankcase
        • Assembling Engine - Starting With The Crankcase
        • Subsequent Work For Assembling Engine
      • WM 1001TW Tightening Torques For Engine - Crankcase, Suspension (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO & Gt3)
        • Information
          • Tightening Torques For Crankcase
          • Engine Sensors
      • WM 1001TW Technical Data, Engine (All Models)
        • Technical values
          • M96/05 And M97/01 Engines
          • Engine Design
          • Engine Control
      • WM 1001TW Technical Data For The M97/76, M97/70 And M97/70S Engine (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt3)
        • Engine Specifications
        • Engine Design
        • Engine Control
      • WM 101801 Checking For Loss Of Pressure (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt3)
        • Tools
        • Technical Values
        • Tools And Materials
        • Information
          • Notes
          • Assessing The Problem
        • Preliminary Work
        • Checking For Loss Of Pressure
        • Subsequent Work
      • WM 103019 Removing And Installing Engine Carrier (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Engine Carrier
        • Installation
          • Installing Engine Carrier
        • Subsequent Work
      • WM 103019 Removing And Installing Engine Carrier - Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Engine Carrier
        • Installing Engine Carrier
        • Subsequent Work
      • WM 103019 Removing And Installing Engine Carrier (Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Engine Carrier
        • Installing Engine Carrier
        • Subsequent Work
      • WM 103019 Removing And Installing Engine Carrier (Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Engine Carrier
          • Removing Engine Carrier - GT2 RS
        • Installing Engine Carrier
          • Installing Engine Carrier - GT2 RS
        • Subsequent Work
      • WM 103519 Removing And Installing Engine Mounting (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt3 - 2005-2008)
        • Tools
        • Technical Values
        • Removing Engine Mounting
        • Installing Engine Mounting
      • WM 103519 Removing And Installing Engine Mounting (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt3 - 2009 & Up)
        • Tools
        • Technical Values
        • Removal
          • Removing Engine Mounting
        • Installation
          • Installing Engine Mounting
      • WM 103519 Removing And Installing Active Engine Mounting - Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Engine Mounting
        • Installing Engine Mounting
        • Subsequent Work
      • WM 103619 Removing And Installing Control Unit For Active Engine Mounting (PADM)
        • Technical Values
        • Preliminary Work
        • Removing Control Unit For Active Engine Mounting (PADM)
        • Installing Control Unit For Active Engine Mounting (PADM)
        • Subsequent Work
      • WM 103655 Replacing Control Unit For Active Engine Mounting (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO & Gt3)
        • Tools
        • Technical Values
        • Reading And Writing Values
      • WM 105519 Removing And Installing Oil Separator (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO & Gt3)
        • Tools
        • Preliminary Work
          • Preliminary Work For Removing Oil Separator
        • Removing Oil Separator
        • Installing Oil Separator
          • Installing Oil Separator
        • Subsequent Work
          • Subsequent Work For Installing Oil Separator
      • WM 105519 Removing And Installing Oil Separator (2010-3) Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO & Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Oil Separator
        • Installing Oil Separator
        • Subsequent Work
    • 13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)
      • WM 131001 Checking Piston Wear (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt2)
        • Checking Piston Wear
      • WM 131020 Removing And Installing Pistons And Handling Tools (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Removal
          • Removing Pistons - Cylinder Bank 1-3
          • Removing Pistons - Cylinder Bank 4-6
        • Assembly
          • Pre-Fitting Pistons And Connecting Rods
        • Installation
          • Installing Pistons - Cylinder Bank 4-6
          • Installing Pistons - Cylinder Bank 1-3
      • WM 131020 Removing And Installing Pistons - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Tools
        • Technical Values
        • Removal
          • Removing Pistons - Cylinder Bank 1-3
          • Removing Pistons - Cylinder Bank 4-6
        • Assembly
          • Pre-Fitting Pistons And Connecting Rods
        • Installation
          • Installing Pistons - Cylinder Bank 4-6
          • Installing Pistons - Cylinder Bank 1-3
      • WM 131020 Removing And Installing Pistons (With Cylinder Sleeve) - Gt3 (Gt3, Gt3 RS)
        • Tools
        • Preliminary Work
        • Removing Pistons - GT3
          • Notes
          • Removal For Cylinder Bank 1-3
        • Installing Pistons - GT3
          • Installing Pistons
        • Subsequent Work
      • WM 131020 Removing And Installing Pistons (With Cylinder Sleeve) (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2)
        • Tools
        • Preliminary Work
        • Removing Pistons
        • Installing Pistons
        • Subsequent Work
      • WM 1310IN Piston Wear, Weight Groups And Identification Markings (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
          • Weight Groups And Identification Markings
        • Checking
          • Checking For Wear
      • WM 1344IN Mounting Specification For Connecting Rod Bolts - Gt3/Gt3 RS (Gt3, Gt3 RS, Gt3 RS 4.0)
        • Technical Values
          • Tightening Torques For New Connecting Rod Bolts
        • Information
          • Refitting Used Connecting Rods
          • Installation Instructions For New Connecting Rods Following A Short Storage Time (Up To 14 Days)
          • Installation Instructions For New Connecting Rods Following A Somewhat Longer Storage Time (More Than 14 Days)
      • WM 137319 Removing And Installing Belt TENSIONER (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Belt Tensioner
        • Installing Belt Tensioner
          • Replacing Tensioner/Damper Element
          • Installing Belt Tensioner
        • Subsequent Work
      • WM 134819 Removing And Installing Crankshaft (Gt3, Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Overview For Crankcase
          • Overview Of Crankcase 1-3 (Symbolic Representation)
        • Removing Crankshaft
        • Installing Crankshaft
        • Subsequent Work
      • WM 134819 Removing And Installing Crankshaft (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Crankshaft
          • Component Overview For Crankcase
          • Removing Crankshaft
        • Installing Crankshaft
        • Subsequent Work
      • WM 134837 Disassembling And Assembling Crankshaft (Turbo Coupe, Turbo CABRIO, Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Disassembling Crankshaft
        • Replacing Connecting Rod Bolts
        • Assembling Crankshaft
        • Subsequent Work
      • WM 134837 Disassembling And Assembling Crankshaft - Gt3 (Gt3, Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Disassembling Crankshaft
        • Assembling Crankshaft
        • Subsequent Work
      • WM 1348TW Tightening Torques For Engine - Crank Drive, Pistons (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Information
      • WM 135919 Removing And Installing Crankshaft Sealing Ring - Flywheel Side (Turbo Coupe, Turbo CABRIO, Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Sealing Ring
        • Installing Sealing Ring
        • Subsequent Work
      • WM 135919 Removing And Installing Crankshaft Sealing Ring - Flywheel Side - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Crankshaft Sealing Ring - Flywheel Side
        • Installing Crankshaft Sealing Ring - Flywheel Side
        • Subsequent Work
      • WM 135919 Removing And Installing Crankshaft Sealing Ring - Gt3 (Flywheel Side) (Gt3, Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Sealing Ring
          • Removing Crankshaft Sealing Ring
        • Installing Sealing Ring
          • Installing Crankshaft Sealing Ring
        • Subsequent Work
      • WM 136019 Removing And Installing Single-Mass Flywheel (Gt3, Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Flywheel
        • Installing Flywheel
        • Subsequent Work
      • WM 136019 Removing And Installing Dual-Mass Flywheel (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Flywheel
        • Installation
          • Installing Flywheel
        • Subsequent Work
      • WM 136019 Removing And Installing Dual-Mass Flywheel - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Dual-Mass Flywheel
        • Installing Dual-Mass Flywheel
        • Subsequent Work
      • WM 136019 Removing And Installing Flywheel - PDK Transmission (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Flywheel - PDK Transmission
        • Installation
          • Installing Flywheel - PDK Transmission
        • Subsequent Work
      • WM 136019 Removing And Installing Flywheel (Turbo Coupe, Turbo CABRIO, Gt3, Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
        • Installation
          • Installing Flywheel
        • Subsequent Work
      • WM 136019 Removing And Installing Flywheel - PDK Transmission - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Flywheel
          • Removing Flywheel - Porsche Doppelkupplung (PDK)
        • Installing Flywheel
          • Installing Flywheel - Porsche Doppelkupplung (PDK)
        • Subsequent Work
      • WM 136319 Removing And Installing Drive Plate For Converter (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work For Drive Plate For Converter
        • Removing Drive Plate For Converter
        • Installing Drive Plate For Converter
        • Subsequent Work For Drive Plate For Converter
      • WM 137319 Removing And Installing Belt TENSIONER (Turbo Coupe, Turbo CABRIO, Gt2)
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Belt Tensioner
        • Installing Belt Tensioner
        • Subsequent Work
      • WM 137419 Removing And Installing Crankshaft Sealing Ring - Belt Side (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Sealing Ring
        • Installation
          • Installing Sealing Ring
        • Subsequent Work
      • WM 137419 Removing And Installing Crankshaft Sealing Ring - Pulley Side (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For 997 Turbo/GT2
        • Removal
          • Removing Sealing Ring
        • Installation
          • Installing Crankshaft Sealing Ring - Turbo/GT2
        • Subsequent Work
          • Subsequent Work For 997 Turbo/GT2
      • WM 137519 Removing And Installing Vibration Damper - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Vibration Damper
        • Installing Vibration Damper
        • Subsequent Work
      • WM 137519 Removing And Installing Vibration Damper (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Vibration Damper
        • Installation
          • Installing Vibration Damper
        • Subsequent Work
      • WM 137619 Removing And Installing Aluminium Pulley - Gt3 (Gt3, Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Aluminum Pulley
        • Installing Aluminum Pulley
        • Subsequent Work
      • WM 137619 Removing And Installing Pulley (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Technical Value
        • Preliminary Work
          • Preliminary Work For 997 Turbo/GT2
        • Removing Pulley
          • Removing Steel Pulley
        • Installing Pulley
          • Installing Steel Pulley
        • Subsequent Work
          • Subsequent Work For 997 Turbo/GT2
      • WM 137801 Checking Drive Belt (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Preliminary Work
        • Checking Drive Belt
        • Subsequent Work
      • WM 137801 Checking Drive Belt - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Preliminary Work
        • Checking Drive Belt
        • Subsequent Work
      • WM 137801 Checking Drive Belt - Gt2 RS
        • Preliminary Work
        • Checking Drive Belt
        • Subsequent Work
      • WM 137819 Removing And Installing Drive Belt (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Preliminary Work
        • Removal
          • Removing Drive Belt
        • Installation
          • Installing Drive Belt
        • Subsequent Work
      • WM 137819 Removing And Installing Drive Belt - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Technical Values
        • Preliminary Work
        • Removing Drive Belt
        • Installing Drive Belt
        • Subsequent Work
      • WM 137819 Removing And Installing Drive Belt - Gt2 RS
        • Technical Values
        • Preliminary Work
        • Removing Drive Belt
        • Installing Drive Belt
        • Subsequent Work
    • 15 - Engine - Cylinder Head, Valve Control -- CARRERA (997)
      • WM 150319 Removing And Installing Camshaft Housing (Gt3, Gt3 RS & Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Overview
          • Camshaft Housing Components
        • Removing Camshaft Housing
        • Installing Camshaft Housing
        • Subsequent Work
      • WM 150319 Removing And Installing Camshaft Housing (Gt2 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Camshaft Housing
          • Component Overview
          • Removing Camshaft Housing
        • Installing Camshaft Housing
        • Subsequent Work
      • WM 150520 Removing And Installing Camshafts (Includes Setting Timing) (CARR. Coupe, CARR. S Coupe, CARR. GTS Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, CARR. 4 GTS, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARRERA 4 GTS CABRIO & Speedster)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Camshafts
        • Installation
          • Component Markings And Distinguishing Features
          • Installing Camshafts, Setting Timing - Cylinder Bank 4-6
          • Installing Camshafts, Setting Timing - Cylinder Bank 1-3
        • Subsequent Work
      • WM 150520 Removing And Installing Camshafts (Includes Setting Timing) (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Camshafts
        • Installing Camshafts
          • Component Identification
          • Installing Camshafts, Setting Timing - Cylinder Bank 4-6
          • Installing Camshafts, Setting Timing - Cylinder Bank 1-3
        • Subsequent Work
      • WM 150520 Removing And Installing Camshafts (Includes Setting Timing) (Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Overview
          • Component Overview Of Camshafts With Housing And Cover
        • Removing Camshafts
        • Installing Camshafts
          • Installing Intake Camshaft For Oil Guide Housing
          • Installing Camshafts
        • Setting Camshafts
          • Adjusting Camshafts (Timing)
        • Subsequent Work
      • WM 150520 Removing And Installing Camshafts (Includes Setting Timing) (Gt2 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Overview
        • Removing Camshafts
        • Installing Camshafts
          • Installing Oil Guide Housing
          • Installing Camshafts
        • Adjusting Camshaft Timing
        • Subsequent Work
      • WM 152119 Removing And Installing Bearing Cover For Intermediate Shaft - M96/05 (CARR. Coupe, CARR. CABRIO, CARR. 4 Coupe, TARGA 4 & CARR. 4 CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Bearing Cover For Intermediate Shaft
          • Removing Bearing Cover For Intermediate Shaft - Up To Engine Number 695 07 475
          • Removing Bearing Cover For Intermediate Shaft - From Engine Number 695 07 476
        • Installing Bearing Cover For Intermediate Shaft
          • Installing Bearing Cover For Intermediate Shaft - Up To Engine Number 695 07 475
          • Installing Bearing Cover For Intermediate Shaft - From Engine Number 695 07 476
        • Subsequent Work For Bearing Cover For Intermediate Shaft
      • WM 153719 Removing And Installing Solenoid Hydraulic Valve For Camshaft Control (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO, CARRERA 4 GTS, CARRERA 4 GTS CABRIO & Speedster)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Solenoid Hydraulic Valve
        • Installation
          • Installing Solenoid Hydraulic Valve
        • Subsequent Work
      • WM 153719 Removing And Installing Solenoid Hydraulic Valve For Camshaft Control (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Solenoid Hydraulic Valve For Camshaft Control
        • Installing Solenoid Hydraulic Valve For Camshaft Control
        • Subsequent Work
      • WM 153719 Removing And Installing Solenoid Hydraulic Valve For Camshaft Control On Intake Side (Gt3
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Hydraulic Valve For Camshaft Control
        • Installing Hydraulic Valve For Camshaft Control
        • Subsequent Work
      • WM 153719 Removing And Installing Solenoid Hydraulic Valve For Outlet Camshaft Adjustment (Gt3)
        • Technical Values
        • Removing Solenoid Hydraulic Valve (Outlet)
        • Installing Solenoid Hydraulic Valve (Outlet)
      • WM 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO, CARR. 4 GTS, CARR. 4 GTS CABRIO & Speedster
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Valve (For Valve Lift Adjustment)
        • Installation
          • Installing Valve (For Valve Lift Adjustment)
        • Subsequent Work
      • WM 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Solenoid Hydraulic Valve
          • Removing Solenoid Hydraulic Valve For Valve Lift Adjustment
        • Installing Solenoid Hydraulic Valve
          • Installing Solenoid Hydraulic Valve For Valve Lift Adjustment
        • Subsequent Work
      • WM 1570TW Tightening Torques For Engine - Cylinder Head, Valve Drive (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Information
          • Tightening Torques For Cylinder Head, Valve Drive
      • WM 157019 Removing And Installing Cylinder Head (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Cylinder Head
          • Notes
          • Component Overview
        • Installing Cylinder Head
          • Notes
          • Component Overview
        • Subsequent Work
      • WM 157019 Removing And Installing Cylinder Head (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO, CARR. 4 GTS, CARR. 4 GTS CABRIO & Speedster
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Cylinder Head
          • Component Overview
        • Installation
          • Installing Cylinder Head
          • Component Overview
        • Subsequent Work
      • WM 157019 Removing And Installing Cylinder Head (Gt2 RS)
        • Tools
        • Preliminary Work
        • Component Overview
          • Cylinder Head Individual Components
        • Removing Cylinder Head
        • Installing Cylinder Head
        • Subsequent Work
      • WM 157037 Disassembling And Assembling Cylinder Head (Except Gt3)
        • Tools
        • Preliminary Work
        • Disassembling Cylinder Head
          • Notes
          • Component Overview Of Cylinder Head
          • Removing Valve-Stem Seal
          • Installing Valve-Stem Seals
        • Assembling Cylinder Head
        • Subsequent Work
      • WM 157019 Removing And Installing Cylinder Head (Gt3)
        • Tools
        • Preliminary Work
        • Component Overview
        • Removing Cylinder Head - GT3
          • Removing Cylinder Head
        • Installing Cylinder Head - GT3
          • Installing Cylinder Head
        • Subsequent Work
      • WM 1570TW Tightening Torques For Engine - Cylinder Head, Valve Drive (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt2 RS)
        • Information
          • Tightening Torques For Cylinder Head, Valve Drive
      • WM 158219 Removing And Installing Cylinder Head Cover (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Cylinder Head Cover
        • Installing Cylinder Head Cover
        • Subsequent Work
      • WM 158219 Removing And Installing Cylinder Head Cover (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Cylinder Head Cover
        • Installation
          • Installing Cylinder Head Cover
        • Subsequent Work
      • WM 159119 Removing And Installing Camshaft-Housing Cover (Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Cylinder Bank 1-3
          • Preliminary Work - Cylinder Bank 4-6
        • Removing Camshaft-Housing Cover
        • Installing Camshaft-Housing Cover
        • Subsequent Work
          • Subsequent Work - Cylinder Bank 4-6
          • Subsequent Work - Cylinder Bank 1-3
      • WM 159119 Removing And Installing Cover For Camshaft Housing (Gt2 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cover For Camshaft Housing
        • Installing Cover For Camshaft Housing
        • Subsequent Work
      • WM 159119 Removing And Installing Cover For Camshaft Housing (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cover For Camshaft Housing
        • Installing Cover For Camshaft Housing
        • Subsequent Work
      • WM 159119 Removing And Installing Cover For Camshaft Housing (Gt3)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Cover For Camshaft Housing - GT3
          • Removing Cover For Camshaft Housing
        • Installing Cover For Camshaft Housing - GT3
          • Installing Cover For Camshaft Housing
        • Subsequent Work
    • 1X - Engine - General -- CARRERA (997)
      • WM 1X00IN Information On Cylinder Liner Wear (All Models)
        • Information
          • Assessment Of Cylinder Liner Wear
      • WM 1X00IN Technical Data For The Ma.170 And Ma.170 S Engine (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO & 911 Turbo S CABRIO)
        • Information
          • Engine Specifications
          • Engine Design
          • Engine Control
          • Engine Lubrication
          • Engine Cooling
      • WM 1X00IN Tightening Torques - Ma.101 And Ma.102 (All Models Except 911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, Gt2 & Gt3)
        • Technical Values
        • Information
          • Group 10 - Crankcase
          • Group 13 - Crank Drive, Pistons
          • Group 15 - Cylinder Head, Valve Drive
          • Group 17 - Lubrication
          • Group 19 - Cooling
      • WM 1X00IN Technical Data - Engine (Gt3)
        • Technical Values
          • Engine Specifications
          • Engine Design
          • Engine Control
          • Engine Lubrication
          • Engine Cooling
      • WM 1X00IN Technical Data - Engine (Gt2 RS)
        • Technical Values
          • Engine Specifications
        • Engine Design
          • Notes
          • Engine Control
          • Engine Lubrication
          • Engine Cooling
      • WM 1X00IN Technical Data On Engine (All Models Except 911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, Gt2 & Gt3)
        • Information
          • Engine Specifications - MA.101 And MA.102
          • Engine Design
          • Engine Control
          • Engine - Lubrication System
          • Engine - Cooling System
      • WM 1X00IN Tightening Torques For Engine (Gt3/Gt3 RS)
        • Information
          • Tightening Torques For Crankcase
          • Crank Drive, Belt Drive
          • Cylinder Head, Camshafts, Camshaft Housing
          • Engine Lubrication
          • Engine Cooling
          • Engine Sensors
      • WM 1X00IN Tightening Torques For Engine (Gt2 RS - M97/70 R)
        • Information
          • Tightening Torques For Crankcase
          • Crank Drive, Belt Drive
          • Cylinder Head, Camshafts, Camshaft Housing
          • Engine Lubrication
          • Engine Cooling
          • Engine Sensors
  • 27 - Starter, Power Supply, Cruise Control -- CARRERA (997)
    • WM 2700TW Technical Data, Engine Electronics (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. 4 Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO)
      • Technical Values
        • Overview
        • Engine Electronics
        • Engine Electronics Tightening Torques
    • WM 2706IN External Power Connection, Jump Lead Starting (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
      • Preliminary Work
        • Preliminary Work For External Power Connection, Jump Lead Starting
      • General Warning Notes
        • Warning Notes For External Power Connection, Jump Lead Starting
      • Information
        • External Power Connection
        • Jump Lead Starting
      • Subsequent Work
        • Rework On External Power Connection, Jump Lead Starting
    • WM 270601 Checking Battery With Battery Tester (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
      • Checking Battery With Battery Tester
    • WM 270601 Checking The Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • General Warning Notes
        • General Warning Notes For The Battery
      • Battery Handling Requirements
        • Low-Maintenance Battery
      • Battery Central Venting
      • Visual Inspection Of Battery
      • Checking Acid Level Of Low-Maintenance Battery
      • Checking Gravity Of Electrolyte
      • Open-Circuit Voltage Measurement
      • Battery Load Test
      • Charging Battery
    • WM 270619 Removing And Installing Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • Technical Values
      • Removing Battery
      • Installing Battery
      • Subsequent Work
        • Subsequent Work - Battery
    • WM 270655 Replacing Lead-Acid Battery With Lithium-Ion Battery (911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
      • Technical Values
      • Removing Lead-Acid Battery
      • Installing Lithium-Ion Battery
    • WM 270689 Battery Trickle Charging (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO)
      • Preliminary Work
      • General Warning Notes
      • Tools And Materials
      • Checking Battery Charging Condition With Battery Tester
      • Reworking
    • WM 2706IN Electrical Emergency Release For Lid (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
      • Electrical Emergency Release, Front Lid
    • WM 2706IN External Power Connection, Jump Lead Starting (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • Preliminary Work
        • Preliminary Work For External Power Connection, Jump Lead Starting
      • General Warning Notes
        • Warning Notes For External Power Connection, Jump Lead Starting
      • Information
        • External Power Connection
        • Jump Lead Starting
      • Subsequent Work
        • Rework On External Power Connection, Jump Lead Starting
    • WM 2706IN Work Instructions After Disconnecting The Battery (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • Technical Values
      • Disconnecting And Connecting The Battery
      • Effect Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And The Precautions To Be Taken
        • Notes
        • Control Unit Memories
        • Supply Voltage Fault Entry
        • Ready Status
        • 2470 DME Control Module
        • Tyre Pressure Monitoring System
        • 4560 Steering Angle Sensor
        • Motor For Sunroof
        • 6452 Power Windows
        • 9025 Instrument Cluster
        • Airbag Control Module
        • On-Board Computer
        • Pcm
        • Test Drive After Disconnecting Battery
        • Effects Of Overvoltage On Electrical And Electronic Systems During Welding Work And The Precautions To Be Taken
    • WM 271219 Removing And Installing Battery Cover (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
      • Technical Values
      • Removing Battery Cover
      • Installing Battery Cover
      • Subsequent Work
        • Reworking If Cowl Panel Cover Deformed
    • WM 272219 Removing And Installing Generator (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
      • Technical Values
      • Preliminary Work
      • Removing Generator
      • Installing Generator
      • Subsequent Work
    • WM 272219 Removing And Installing Generator (Except 911 Turbo Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
      • Technical Values
      • Preliminary Work
      • Removing Generator
      • Installing Generator
      • Subsequent Work
    • WM 272219 Removing And Installing The Generator (911 Gt3, 911 Gt3 RS)
      • Technical Values
      • Preliminary Work
        • Preliminary Work For Generator
      • Removing The Generator
      • Installing The Generator
      • Subsequent Work
        • Subsequent Work For Generator
    • WM 276019 Removing And Installing Starter (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2, 911 Gt2 RS)
      • Technical Values
      • Preliminary Work
      • Removing Starter
      • Installing Starter
      • Subsequent Work
    • WM 276019 Removing And Installing Starter (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
      • Technical Values
      • Preliminary Work
      • Removing Starter
      • Installing Starter
      • Subsequent Work
    • WM 276019 Removing And Installing Starter (911 Gt3, 911 Gt3 RS)
      • Technical Values
      • Preliminary Work
        • Preliminary Work For Starter
      • Removing The Starter
        • Removing Starter
      • Installing The Starter
      • Subsequent Work
        • Subsequent Work For Starter
• Engine Performance
  • Emissions
    • Emission Applications
      • Emission Applications
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • State Emission Standards - Diesel
      • ARIZONA
      • Colorado
      • CONNECTICUT
      • IDAHO
      • KENTUCKY
      • MASSACHUSETTS
      • New YORK
      • OHIO
      • RHODE Island
      • UTAH
      • WASHINGTON
    • State Emission Standards - Gas
      • ALASKA
      • ARIZONA
      • CALIFORNIA
        • California Emission Standards ASM Tests
        • Legend
        • Pass/Fail Emission Standards = A+B / VTW
      • Colorado
      • CONNECTICUT
      • DELAWARE
      • District Of COLUMBIA
      • GEORGIA
      • IDAHO
      • ILLINOIS
      • INDIANA
      • KENTUCKY
      • MARYLAND
      • MASSACHUSETTS
      • MISSOURI
      • NEVADA
      • New Jersey
      • New MEXICO
      • New YORK
      • North CAROLINA
      • OHIO
      • OREGON
      • PENNSYLVANIA
      • RHODE Island
      • TENNESSEE
      • TEXAS
      • UTAH
      • VIRGINIA
      • WASHINGTON
      • WISCONSIN
      • U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
      • U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
      • U.S. EPA Im240 Emission Standards
        • Start-Up Standards
        • Final Standards
  • Fuel Delivery
    • 20 - Fuel Supply, Control -- CARRERA (997)
      • WM 200101 Checking Fuel System (High-Pressure Side) For Leaks (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
          • Requirements
        • Checking
          • Component Overview
          • Overview Of Fuel System In Engine Compartment
          • Leak Test On High-Pressure Side
        • Subsequent Work
      • WM 200101 Checking Fuel System (High-Pressure Side) For Leaks (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
          • Requirements
        • Checking
          • Component Overview
          • Overview Of Fuel System In Engine Compartment
          • Leak Test On High-Pressure Side
        • Subsequent Work
      • WM 2001IN Bleeding Fuel System On High-Pressure Side (First Start Function) (All Models)
        • Tools
        • Information
          • Explanation Of First Start Function
        • Bleeding High-Pressure System
          • Performing First Start Routine
      • WM 2001IN Technical Data, Fuel System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
          • Technical Data, Fuel System
          • Fuel System
      • WM 2001AW Basic Safety Instructions For Working With The Fuel System (All Models)
        • Safety Instructions
          • Safety Instructions When Working On The Fuel System
      • WM 2001TW Technical Data, Fuel System (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Technical Values
          • Technical Data, Fuel System
          • Fuel System
      • WM 200201 Checking Fuel Pressure (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Tools
        • Checking Fuel Pressure
          • Notes
          • Fuel System Holding Pressure
      • WM 200201 Checking Fuel Pressure In The Low-Pressure System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Tools And Materials
        • Checking Fuel Pressure
          • Checking Fuel Pressure - Engine Stopped
          • Checking Fuel Pressure - Engine Idling
        • Subsequent Work
      • WM 200201 Checking Fuel Pressure In The Low-Pressure System (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Fuel Pressure
          • Checking Fuel Pressure - Engine Stopped
          • Checking Fuel Pressure - Engine Idling
        • Subsequent Work
      • WM 200301 Checking Fuel Quality (All Models)
        • Tools
        • Tools And Materials
        • Checking Fuel Quality
          • Checking Fuel Quality
      • WM 200317 Draining And Filling Fuel (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Tools And Materials
        • Information
        • Preliminary Work
        • Draining Fuel
          • Draining Fuel - RoW Variant
          • Draining Fuel - USA Variant
        • Filling Fuel
          • Filling Fuel - RoW Variant
          • Filling Fuel - USA Variant
        • Subsequent Work
      • WM 200317 Draining And Filling Fuel (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Tools And Materials
        • Information
        • Preliminary Work
          • Preliminary Work - Carrera 2
        • Draining Fuel
          • Draining Fuel - Carrera 2
        • Filling Fuel
          • Filling Fuel - Carrera 2
        • Subsequent work
          • Subsequent Work - Carrera 2
      • WM 200719 Removing And Installing Filler Neck (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Filler Neck
        • Installing Filler Neck
        • Subsequent Work
      • WM 200719 Removing And Installing Filler Neck (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary work
        • Removing Filler Neck
        • Installing Filler Neck
        • Subsequent Work
      • WM 2010EN Emptying And Filling The Fuel Tank (All Models)
        • Tools
        • Technical Values
        • Preliminary work
        • Emptying The Fuel Tank
          • Notes
          • Device Connections
        • Filling The Fuel Tank
        • Subsequent Work
      • WM 2015IN Calibrating Fuel-Level Sensor System (All Models)
        • Warning Notes For Calibrating Fuel-Level Sensor System
        • Calibrating Fuel-Level Sensor System - Carrera 4, Turbo, 4 GTS, GT3, GT2
        • Calibrating Fuel-Level Sensor System - C4, Turbo, 4 GTS, GT3, GT2
      • WM 201019 Removing And Installing Fuel Tank (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
          • Component Information
            • Overview
        • Removing Fuel Tank
        • Installing Fuel Tank
        • Subsequent Work
      • WM 201019 Removing And Installing Fuel Tank (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Carrera 2
          • Preliminary Work - Carrera 4
        • Removing Fuel Tank
          • Removing Fuel Tank - Carrera 2
          • Removing Fuel Tank - Carrera 4
        • Installing Fuel Tank
          • Installing Fuel Tank - Carrera 2
          • Installing Fuel Tank - Carrera 4
        • Subsequent Work
          • Subsequent Work - Carrera 2
          • Subsequent Work - Carrera 4
      • WM 201519 Removing And Installing Fuel Level Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Fuel Level Sensor
        • Installing Fuel Level Sensor
        • Subsequent Work
      • WM 201519 Removing And Installing Fuel Level Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Carrera 2
          • Preliminary Work - Carrera 4
        • Removing Fuel Level Sensor
          • Removing Fuel Level Sensor - Carrera 2
          • Removing Fuel Level Sensor - Carrera 4
        • Installing Fuel Level Sensor
          • Installing Fuel Level Sensor - Carrera 2
          • Installing Fuel Level Sensor - Carrera 4
        • Subsequent Work
          • Subsequent Work - Carrera 2
          • Subsequent Work - Carrera 4
      • WM 202319 Removing And Installing Tank Vent Valve (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Component Information
        • Removing Tank Vent Valve
        • Installing Tank Vent Valve
        • Subsequent Work
      • WM 202319 Removing And Installing Tank Vent (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Preliminary Work
        • Component Information
        • Removing Tank Vent
        • Installing Tank Vent
        • Subsequent Work
      • WM 202519 Removing And Installing Carbon Canister (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - RoW Variant
          • Preliminary Work - USA Variant
        • Removing Carbon Canister
          • Removing carbon canister - RoW variant
          • Removing carbon canister - USA variant
        • Installing Carbon Canister
          • Installing Carbon Canister - RoW Variant
          • Installing Carbon Canister - USA Variant
        • Subsequent Work
          • Subsequent Work - RoW Variant
          • Subsequent Work - USA Variant
      • WM 202519 Removing And Installing Carbon Canister (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work - RoW Variant
          • Preliminary Work - USA Variant
        • Removing Carbon Canister
          • Removing Carbon Canister - RoW Variant
          • Removing Carbon Canister - USA Variant
        • Installing Carbon Canister
          • Installing Carbon Canister - RoW Variant
          • Installing Carbon Canister - USA Variant
        • Subsequent Work
          • Subsequent Work - RoW Variant
          • Subsequent Work - USA Variant
      • WM 202519 Removing And Installing Carbon Canister (All Models)
        • Tools
        • Technical Values
        • Preliminary Work For Carbon Canister
        • Removing Carbon Canister
          • Removing Carbon Canister - RoW Version
          • Removing Carbon Canister - USA Version
        • Installing Carbon Canister
          • Installing Carbon Canister - RoW Version
          • Installing Carbon Canister - USA Version
        • Subsequent Work For Carbon Canister
      • WM 204819 Removing And Installing Leakage Diagnosis Pump (All Models)
        • Preliminary Work
        • Removal
          • Removing Leakage Diagnosis Pump
        • Installation
          • Installing Leakage Diagnosis Pump
        • Subsequent Work
      • WM 206019 Removing And Installing Fine Fuel Filter (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Removing Fuel Filter
        • Installing Fuel Filter
      • WM 206601 Checking Delivery Rate Of Electric Fuel Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Delivery Rate Of Electric Fuel Pump
        • Subsequent Work
      • WM 206601 Checking Delivery Rate Of Electric Fuel Pump (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking
          • Checking Delivery Rate Of Electric Fuel Pump
        • Subsequent Work
      • WM 206601 Checking Quantity Delivered By Fuel Pump (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Tools
        • Preliminary Work
        • Checking Delivery Rate
        • Subsequent Work
      • WM 206619 Removing And Installing Fuel Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Fuel Pump
        • Installing Fuel Pump
        • Subsequent Work
      • WM 206619 Removing And Installing Fuel Pump (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Carrera 2
          • Preliminary Work - Carrera 4
        • Removing Fuel Pump
          • Removing Fuel Pump - Carrera 2
          • Removing Fuel Pump - Carrera 4
        • Installing Fuel Pump
          • Installing Fuel Pump - Carrera 2
          • Installing Fuel Pump - Carrera 4
        • Subsequent Work
          • Subsequent Work - Carrera 2
          • Subsequent Work - Carrera 4
      • WM 206819 Removing And Installing Fuel Cooler (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions When Working On The Fuel System
        • Removing Fuel Cooler
        • Installing Fuel Cooler
        • Subsequent Work
      • WM 207019 Control Unit For Fuel Pump (All Models)
        • Preliminary work
          • Preliminary Work For Control Unit For Fuel Pump
        • Removing Control Unit For Fuel Pump
        • Installing Control Unit For Fuel Pump
        • Subsequent Work
          • Subsequent Work For Control Unit For Fuel Pump
      • WM 208019 Removing And Installing Accelerator Pedal (All Models)
        • Information
        • Removing Accelerator Pedal
          • Removing
        • Installing Accelerator Pedal
          • Installing
    • 24 - Fuel System - Electronic Ignition -- CARRERA (997)
      • WM 2400AW Precautionary Measures When Handling Oxygen Sensors (All Models)
        • Precautionary Measures When Handling Oxygen Sensors
      • WM 2400IN Technical Data - Fuel System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
          • Fuel System
      • WM 242419 Removing And Installing Air-Cleaner Element (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Removal
          • Removing Air-Cleaner Element
        • Installation
          • Installing Air-Cleaner Element
      • WM 242419 Removing And Installing Air-Cleaner Element (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Removing Air-Cleaner Element
        • Installing Air-Cleaner Element
      • WM 242419 Removing And Installing Air-Cleaner Element (Gt2 RS)
        • Removing Air-Cleaner Element
        • Installing Air-Cleaner Element
      • WM 242420 Removing And Installing Air-Cleaner Element (Gt3, Gt3 RS & Gt3 RS 4.0)
        • Technical Values
        • Removing Air-Cleaner Element
          • Removing Air-Cleaner Element
        • Installing Air-Cleaner Element
          • Installing Air-Cleaner Element
      • WM 242519 Removing And Installing Air Cleaner Housing (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Removing Air Cleaner Housing
          • Notes
          • Disassembling And Assembling Air Cleaner Housing
        • Installing Air Cleaner Housing
      • WM 242519 Removing And Installing Air Cleaner Housing (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Air Cleaner Housing
        • Installing Air Cleaner Housing
        • Subsequent Work
      • WM 242519 Removing And Installing Air Cleaner Housing (Gt2 RS)
        • Removing Air Cleaner Housing
        • Installing Air Cleaner Housing
      • WM 243019 Removing And Installing Fuel Collection Pipe With Fuel Injectors (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Preliminary Work
        • Component Overview
          • Notes
          • Overview Of Fuel System In Engine Compartment
        • Removing Fuel Collection Pipe With Fuel Injectors
        • Installing Fuel Collection Pipe With Fuel Injectors
        • Subsequent Work
      • WM 243019 Removing And Installing Fuel Collection Pipe With Fuel Injectors (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
          • Component Overview
          • Overview Of Fuel System In Engine Compartment
        • Removal
          • Removing Fuel Collection Pipe With Fuel Injectors
          • Cleaning Fuel Injectors And Replacing Wearing Parts
            • Component overview
        • Installation
          • Tightening Specifications For Fuel Collection Pipe And Fuel Line
          • Installing Fuel Collection Pipe With Fuel Injectors
        • Subsequent Work
      • WM 244001 Checking Fuel Injector (All Models
        • Tools
        • Preliminary Work
        • Tools And Materials
        • Checking Fuel Injector
        • Subsequent Work
      • WM 244020 Removing And Installing Fuel Injectors (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions When Working On The Fuel System
        • Removing Fuel Injectors
          • Removing Fuel Injectors - Cylinder Bank 1-3
        • Removing Fuel Injectors - Cylinder Bank 4-6
        • Installing Fuel Injectors
          • Installing Fuel Injectors - Cylinder Bank 1-3
          • Installing Fuel Injectors - Cylinder Bank 4-6
        • Subsequent Work
      • WM 244219 Removing And Installing Throttle Housing (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Throttle Housing
        • Installing Throttle Housing
        • Subsequent Work
      • WM 244219 Removing And Installing Throttle Housing (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Throttle Housing
        • Installing Throttle Housing
        • Subsequent Work
      • WM 244219 Removing And Installing Throttle Housing (Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Throttle Housing
          • Removing Throttle Housing
        • Installing Throttle Housing
          • Installing Throttle Housing
        • Subsequent Work
      • WM 244519 Removing And Installing Hot-Film Mass Air Flow Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Mass Air Flow Sensor
        • Installation
          • Installing Mass Air Flow Sensor
        • Subsequent Work
      • WM 244601 Checking Intake-Air Distributor For Leaks (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking
          • Checking Intake-Air Distributor For Leaks
        • Subsequent Work
      • WM 244601 Checking The Intake-Air Distributor For Leaks (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Preliminary Work
        • Checking
          • Checking Intake-Air Distributor For Leaks
        • Subsequent Work
      • WM 244619 Removing And Installing Intake-Air Distributor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Intake-Air Distributor
          • Component Overview 1
          • Component Overview 2: Intake-Air Distributor Disassembled
        • Installing Intake-Air Distributor
        • Subsequent Work
      • WM 244619 Removing And Installing Intake-Air Distributor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
          • Component Overview For Intake-Air Distributor
        • Removal
          • Removing Intake-Air Distributor - Side 1-3
          • Removing Intake-Air Distributor - Side 4-6
        • Installation
          • Tightening Sequence
          • Installing Intake-Air Distributor - Side 1-3
          • Installing Intake-Air Distributor - Side 4-6
        • Subsequent Work
      • WM 244619 Removing And Installing Intake-Air Distributor (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Intake-Air Distributor
        • Installing Intake-Air Distributor
        • Subsequent Work
      • WM 244619 Removing And Installing Intake-Air Distributor (Gt2 RS)
        • Tools
        • Technical Values
        • Information
          • Component Overview
        • Preliminary Work
        • Removing Intake-Air Distributor
          • Removing Center Intake-Air Distributor
          • Removing Intake-Air Distributor, Side 1-3
          • Removing Intake-Air Distributor, Side 4-6
        • Installing Intake-Air Distributor
          • Installing Intake-Air Distributor, Side 1-3
          • Installing Intake-Air Distributor, Side 4-6
          • Installing Center Intake-Air Distributor
        • Subsequent Work
      • WM 244620 Removing And Installing Intake-Air Distributor (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Information
          • Overview
        • Preliminary Work
        • General Warning Notes
          • Danger From Fuel
          • Hot Engine Components
        • Removing Intake-Air Distributor
          • Removing Center Intake-Air Distributor
          • Removing Intake-Air Distributor, Side 1-3
          • Removing Intake-Air Distributor, Side 4-6
        • Installing Intake-Air Distributor
          • Installing Intake-Air Distributor, Side 1-3
          • Installing Right Intake-Air Distributor
          • Installing Centre Intake-Air Distributor
        • Subsequent Work
      • WM 244637 Disassembling And Assembling Intake-Air Distributor (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
        • Technical Values
        • Preliminary Work
        • Disassembling Intake-Air Distributor
          • Notes
          • Component Overview
        • Assembling Intake-Air Distributor
          • Notes
          • Component Overview
        • Subsequent Work
      • WM 247019 Removing And Installing DME (DFI) Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Speedster, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information: Adaptation Of The DME (DFI) Control Unit
        • Preliminary Work
          • Preliminary Work For DME (DFI) Control Unit
        • Removing DME (DFI) Control Unit
        • Installing DME (DFI) Control Unit
        • Subsequent Work
          • Subsequent Work For DME (DFI) Control Unit
        • Programming DME (DFI) Control Unit
          • Notes
          • Programming DME (DFI) Control Unit
      • WM 244719 Removing And Installing Intake Manifold (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
        • Technical values
        • Preliminary Work
        • Removing Intake Manifold
          • Remove Intake Manifold - (Cylinder Bank 1-3)
          • Remove Intake Manifold - (Cylinder Bank 4-6)
        • Installing Intake Manifold
          • Install Intake Manifold - (Cylinder Bank 1-3)
          • Install Intake Manifold - (Cylinder Bank 4-6)
        • Subsequent Work
      • WM 246319 Removing And Installing High-Pressure Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing High-Pressure Pump
          • Notes
          • Component Overview
        • Installing High-Pressure Pump
        • Subsequent Work
      • WM 246319 Removing And Installing High-Pressure Pump (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing High-Pressure Pump
        • Installing High-Pressure Pump
        • Subsequent Work
      • WM 246919 Removing And Installing Oxygen Sensor Upstream Of Catalytic Converter (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oxygen Sensor Upstream Of Catalytic Converter
        • Installing Oxygen Sensor Upstream Of Catalytic Converter
        • Subsequent Work
      • WM 246919 Removing And Installing Oxygen Sensors Upstream Of Catalytic Converter (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Oxygen Sensor Upstream Of Catalytic Converter
        • Installation
          • Installing Oxygen Sensor Upstream Of Catalytic Converter
        • Subsequent work
      • WM 246919 Removing And Installing Lambda Sensor Upstream Of Catalytic Converter (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Lambda Sensor Upstream Of Catalytic Converter
        • Installing Lambda Sensor Upstream Of Catalytic Converter
        • Subsequent Work
      • WM 247019 Removing And Installing DME (DFI) Control Unit (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt2 RS)
        • Tools
        • Technical Values
        • Information: Adaptation Of The DME (DFI) Control Unit
        • Preliminary Work
          • Preliminary Work For DME (DFI) Control Unit
        • Removing DME (DFI) Control Unit
        • Installing DME (DFI) Control Unit
        • Subsequent Work
          • Subsequent Work For DME (DFI) Control Unit
        • Programming DME (DFI) Control Unit
          • Programming New DME (DFI) Control Unit
          • Programming DME (DFI) Control Unit
      • WM 247019 Removing And Installing DME Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Tools
        • Technical Values
        • Information: Adaptation Of The DME (DFI) Control Unit
        • Preliminary Work
          • Preliminary Work For DME (DFI) Control Unit
        • Removing DME (DFI) Control Unit
        • Installing DME (DFI) Control Unit
        • Subsequent Work
          • Subsequent Work For DME (DFI) Control Unit
        • Programming DME (DFI) Control Unit
          • Programming New DME (DFI) Control Unit
          • Programming DME (DFI) Control Unit
      • WM 247019 Removing And Installing DME Control Unit (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
          • Subsequent Work On DME Control Unit
        • General Warning Notes
          • General Warning Notes For Control Units
        • Removing DME Control Unit
          • Removing DME Control Module
        • Installing DME Control Unit
          • Installing DME Control Module
        • Subsequent Work
          • Subsequent Work On DME Control Unit
        • Programming DME Control Unit
          • Programming New DME Control Unit
          • Programming DME Control Unit
      • WM 247319 Removing And Installing Oxygen Sensor Downstream Of Catalytic Converter (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oxygen Sensor Downstream Of Catalytic Converter
        • Installing Oxygen Sensor Downstream Of Catalytic Converter
        • Subsequent Work
      • WM 247319 Removing And Installing Oxygen Sensors (LS) Behind Catalytic Converter (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Oxygen Sensor
        • Installation
          • Installing Oxygen Sensor
        • Subsequent Work
      • WM 247319 Removing And Installing Lambda Sensor Downstream Of Catalytic Converter (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Lambda Sensor Downstream Of Catalytic Converter
        • Installing Lambda Sensor Downstream Of Catalytic Converter
        • Subsequent Work
      • WM 248019 Removing And Installing Intake Manifold Pressure Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Intake Manifold Pressure Sensor
        • Installing Intake Manifold Pressure Sensor
        • Subsequent Work
      • WM 247419 Removing And Installing Resonance Tube (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Resonance Tube
        • Installation
          • Installing Resonance Tube
        • Subsequent Work
      • WM 247419 Removing And Installing Tuning Pipe (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Removing Tuning Pipe
        • Removing Tuning Pipe
        • Installing Tuning Pipe
        • Subsequent Work
          • Work Subsequent To Installing Tuning Pipe
      • WM 248302 Leak-Testing The Vacuum System (Gt3, Gt3 RS & Gt3 RS 4.0)
        • Tools
        • Leak-Testing The Vacuum System
  • 28 - Ignition System -- CARRERA (997)
    • WM 2800TW Technical Data, Ignition System (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
      • Technical Values
        • Technical Data, Ignition System
    • WM 280419 Removing And Installing Ignition Switch (All Models)
      • Tools
      • Technical Values
      • Removing Ignition Switch
      • Installing Ignition Switch
      • Information
        • Emergency Operation Of The Ignition Key Lock
    • WM 282019 Removing And Installing Ignition Rod Module (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removal
        • Removing Ignition Rod Module
      • Installation
        • Installing Ignition Rod Module
      • Subsequent Work
    • WM 282019 Removing And Installing Bar Ignition Module (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Technical Values
      • Preliminary Work
      • Removing Bar Ignition Module
      • Installing Bar Ignition Module
      • Subsequent Work
    • WM 282019 Removing And Installing Ignition Coil (Gt3 & Gt3 RS)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Ignition Coil
      • Installing Ignition Coil
      • Subsequent Work
    • WM 283919 Removing And Installing Hall Sender (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Technical Values
      • Preliminary Work
        • Preliminary Work - Cylinder Bank 1-3
        • Preliminary Work - Cylinder Bank 4-6
      • Removing Hall Sender
        • Removing Hall Sender - Cylinder Bank 1-3
        • Removing Hall Sender - Cylinder Bank 4-6
      • Installing Hall Sender
        • Installing Hall Sender - Cylinder Bank 1-3
        • Installing Hall Sender - Cylinder Bank 4-6
      • Subsequent Work
        • Subsequent Work - Cylinder Bank 1-3
        • Subsequent Work - Cylinder Bank 4-6
    • WM 283919 Removing And Installing Hall Sender (Turbo Coupe, Turbo CABRIO & Gt2)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Hall Sender
      • Installing Hall Sender
      • Subsequent Work
    • WM 283919 Removing And Installing Hall Sender (Gt2 RS)
      • Technical Values
      • Preliminary Work
      • Removing Hall Sender
        • Removing Hall Sender
      • Installing Hall Sender
        • Installing Hall Sender
      • Subsequent Work
    • WM 287219 Removing And Installing Knock Sensor (All Models)
      • Technical Values
      • Preliminary Work
      • Removing Knock Sensor
        • Removing Knock Sensor For Cylinder Bank 1-3
        • Removing Knock Sensor For Cylinder Bank 4-6
      • Installing Knock Sensor
        • Installing Knock Sensor For Cylinder Bank 1-3
        • Installing Knock Sensor For Cylinder Bank 4-6
      • Subsequent Work
    • WM 287219 Removing And Installing Knock Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Knock Sensor
        • Removing Knock Sensor For Cylinder Bank 1-3
        • Removing Knock Sensor For Cylinder Bank 4-6
      • Installing Knock Sensor
        • Installing Knock Sensor For Cylinder Bank 1-3
        • Installing Knock Sensor For Cylinder Bank 4-6
      • Subsequent Work
    • WM 287020 Removing And Installing Spark Plugs (Turbo Coupe, Turbo CABRIO & Gt2)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Spark Plugs
      • Installing Spark Plugs
      • Subsequent Work
    • WM 287020 Removing And Installing Spark Plugs (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Spark Plugs
      • Installing Spark Plugs
      • Subsequent Work
    • 28 70 20 REMOVING AND INSTALLING SPARK PLUGS - as of MY 2005 (CARRERA 2, CARRERA 2S, CABRIO 2, CABRIO 2S, CARRERA 4, CABRIO 4)
      • Tools
      • Preliminary work
        • Preliminary work
      • Removing
        • Removing spark plugs
      • Installing
        • Installing spark plugs
      • Subsequent work
        • Reworking
    • WM 287020 Removing And Installing Spark Plugs (Gt2 RS)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Spark Plugs
      • Installing Spark Plugs
      • Subsequent Work
    • WM 287219 Removing And Installing Knock Sensor (Gt2 RS)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Knock Sensor
        • Removing Knock Sensor For Cylinder Bank 1-3
        • Removing Knock Sensor For Cylinder Bank
      • Installing Knock Sensor
        • Installing Knock Sensor For Cylinder Bank 1-3
        • Installing Knock Sensor For Cylinder Bank 4-6
      • Subsequent Work
    • WM 287219 Removing And Installing Knock Sensor (Turbo Coupe, Turbo CABRIO & Gt2)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Knock Sensor
        • Removing Knock Sensor, Cylinder Bank 1-3
        • Removing Knock Sensor, Cylinder Bank 4-6
      • Installing Knock Sensor
        • Installing Knock Sensor, Cylinder Bank 1-3
        • Installing Knock Sensor, Cylinder Bank 4-6
      • Subsequent Work
    • WM 287319 Removing And Installing Pulse Sender (Speed Sender) (All Models)
      • Technical Values
      • Preliminary Work
      • Removing Pulse Sender (Speed Sender)
      • Installing Pulse Sender (Speed Sender)
      • Subsequent Work
    • WM 287319 Removing And Installing Pulse Sender (Speed Sender) (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
      • Technical Values
      • Preliminary Work
      • Removing Pulse Sender (Speed Sender)
      • Installing Pulse Sender (Speed Sender)
      • Subsequent Work
  • Mode 6 - PORSCHE
    • Introduction
    • Mode 6 Data 2005
    • Mode 6 Data 2006-08
    • Mode 6 Data 2009
    • Mode 6 Data 2010
    • Mode 6 Data 2010-12
    • Mode 6 Data 2013
    • Mode 6 Data 2014-16
    • Mode 6 Data 2017 BOXSTER & CAYMAN
    • Mode 6 Data 2017 CARRERA
    • Mode 6 Data 2017 CARRERA Turbo
  • Specifications
    • Firing Order & Cylinder Identification
      • Firing Order & Cylinder Identification
        • Notes
        • H4 Engine
        • Inline 4-CYL Engine
        • H6 Engine
        • V6 Engine
        • Diesel (NAR) V6 Engine
        • 2015 SPYDER V8 Engine
        • V8 Engine
        • V10 Engine
  • System
    • 08 - Symptoms -- CARRERA (997)
      • WM 0830IN Symptoms - Transmission/Suspension/Brakes (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS)
        • General Overview Of Documents
        • 911 Turbo (997)/911 GT3 (997)
  • Testing & Diagnosis
    • 08 - Symptoms -- CARRERA (997)
      • WM 0830IN Symptoms - Transmission/Suspension/Brakes (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS)
        • General Overview Of Documents
        • 911 Turbo (997)/911 GT3 (997)
  • Tune-Up
    • 28 - Ignition System -- CARRERA (997)
      • WM 2800TW Technical Data, Ignition System (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
        • Technical Values
          • Technical Data, Ignition System
      • WM 280419 Removing And Installing Ignition Switch (All Models)
        • Tools
        • Technical Values
        • Removing Ignition Switch
        • Installing Ignition Switch
        • Information
          • Emergency Operation Of The Ignition Key Lock
      • WM 282019 Removing And Installing Ignition Rod Module (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removal
          • Removing Ignition Rod Module
        • Installation
          • Installing Ignition Rod Module
        • Subsequent Work
      • WM 282019 Removing And Installing Bar Ignition Module (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Bar Ignition Module
        • Installing Bar Ignition Module
        • Subsequent Work
      • WM 282019 Removing And Installing Ignition Coil (Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Ignition Coil
        • Installing Ignition Coil
        • Subsequent Work
      • WM 283919 Removing And Installing Hall Sender (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Cylinder Bank 1-3
          • Preliminary Work - Cylinder Bank 4-6
        • Removing Hall Sender
          • Removing Hall Sender - Cylinder Bank 1-3
          • Removing Hall Sender - Cylinder Bank 4-6
        • Installing Hall Sender
          • Installing Hall Sender - Cylinder Bank 1-3
          • Installing Hall Sender - Cylinder Bank 4-6
        • Subsequent Work
          • Subsequent Work - Cylinder Bank 1-3
          • Subsequent Work - Cylinder Bank 4-6
      • WM 283919 Removing And Installing Hall Sender (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Hall Sender
        • Installing Hall Sender
        • Subsequent Work
      • WM 283919 Removing And Installing Hall Sender (Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Hall Sender
          • Removing Hall Sender
        • Installing Hall Sender
          • Installing Hall Sender
        • Subsequent Work
      • WM 287219 Removing And Installing Knock Sensor (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Knock Sensor
          • Removing Knock Sensor For Cylinder Bank 1-3
          • Removing Knock Sensor For Cylinder Bank 4-6
        • Installing Knock Sensor
          • Installing Knock Sensor For Cylinder Bank 1-3
          • Installing Knock Sensor For Cylinder Bank 4-6
        • Subsequent Work
      • WM 287219 Removing And Installing Knock Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Knock Sensor
          • Removing Knock Sensor For Cylinder Bank 1-3
          • Removing Knock Sensor For Cylinder Bank 4-6
        • Installing Knock Sensor
          • Installing Knock Sensor For Cylinder Bank 1-3
          • Installing Knock Sensor For Cylinder Bank 4-6
        • Subsequent Work
      • WM 287020 Removing And Installing Spark Plugs (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Spark Plugs
        • Installing Spark Plugs
        • Subsequent Work
      • WM 287020 Removing And Installing Spark Plugs (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Spark Plugs
        • Installing Spark Plugs
        • Subsequent Work
      • 28 70 20 REMOVING AND INSTALLING SPARK PLUGS - as of MY 2005 (CARRERA 2, CARRERA 2S, CABRIO 2, CABRIO 2S, CARRERA 4, CABRIO 4)
        • Tools
        • Preliminary work
          • Preliminary work
        • Removing
          • Removing spark plugs
        • Installing
          • Installing spark plugs
        • Subsequent work
          • Reworking
      • WM 287020 Removing And Installing Spark Plugs (Gt2 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Spark Plugs
        • Installing Spark Plugs
        • Subsequent Work
      • WM 287219 Removing And Installing Knock Sensor (Gt2 RS)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Knock Sensor
          • Removing Knock Sensor For Cylinder Bank 1-3
          • Removing Knock Sensor For Cylinder Bank
        • Installing Knock Sensor
          • Installing Knock Sensor For Cylinder Bank 1-3
          • Installing Knock Sensor For Cylinder Bank 4-6
        • Subsequent Work
      • WM 287219 Removing And Installing Knock Sensor (Turbo Coupe, Turbo CABRIO & Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Knock Sensor
          • Removing Knock Sensor, Cylinder Bank 1-3
          • Removing Knock Sensor, Cylinder Bank 4-6
        • Installing Knock Sensor
          • Installing Knock Sensor, Cylinder Bank 1-3
          • Installing Knock Sensor, Cylinder Bank 4-6
        • Subsequent Work
      • WM 287319 Removing And Installing Pulse Sender (Speed Sender) (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Pulse Sender (Speed Sender)
        • Installing Pulse Sender (Speed Sender)
        • Subsequent Work
      • WM 287319 Removing And Installing Pulse Sender (Speed Sender) (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Pulse Sender (Speed Sender)
        • Installing Pulse Sender (Speed Sender)
        • Subsequent Work
• General Information
  • Abbreviations
    • Commonly Used Abbreviations - General Information
      • * Please Read This First *
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "J"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "Q"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
  • Basic Trouble Shooting
    • Basic Trouble Shooting - General Information
      • * Please Read This First *
      • Accessories & Electrical
        • Charging System Trouble Shooting
        • Ignition System Trouble Shooting
        • Starter Trouble Shooting
      • Air Conditioning & Heat
        • Air Conditioning Trouble Shooting
        • Heater System Trouble Shooting
      • Brakes
        • Brake System Trouble Shooting
      • Engine Mechanical
        • Cooling System Trouble Shooting
        • Gasoline Engine - Mechanical Trouble Shooting
      • Engine Performance
        • Carburetor Trouble Shooting:
        • Diesel Engine Trouble Shooting
        • Fuel Injection Trouble Shooting
        • Ignition System Trouble Shooting
        • Starter Trouble Shooting
        • Tune-Up Trouble Shooting - Gas Engine Vehicles
        • Vacuum Pump - Diesel Trouble Shooting
      • Manual Transmission
        • Manual Transmission Trouble Shooting
      • Powertrain
        • Clutch Trouble Shooting
        • Drive Axle - Noise Diagnosis
          • Unrelated Noises
          • Non-Drive Axle Noises
          • Gear Noise
          • Chuckle
          • Knock
          • Clunk
          • Bearing Whine
          • Bearing Rumble
          • Chatter On Turns
          • Axle Shaft Noise
          • Vibration
        • Drive Axle - RWD Trouble Shooting
        • Fwd Axle Shafts & CV Joints Trouble Shooting
      • Steering & Suspension
        • Manual Steering Gear Trouble Shooting
        • Power Steering Trouble Shooting
        • Steering Column Trouble Shooting
        • Suspension Trouble Shooting
        • Wheel Alignment Trouble Shooting
    • Commonly Used Abbreviations - General Information
      • * Please Read This First *
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "J"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "Q"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Engine Performance - Trouble Shooting - General Information
      • * Please Read This First *
      • Engine Performance
  • Brakes
    • Anti-Lock Brake Safety Precautions - General Information
      • * Please Read This First *
      • Anti-Lock Brake Safety Precautions
    • Map - Brake Systems
      • Brake Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Accelerometers
        • Accumulators
        • Anchor Pins
        • Anti-Lock Brake Control Assembly(Module)
        • Anti-Lock Brake Controller
        • Anti-Lock Brake Systems
        • Axle Seal
        • Backing Plates
        • Bleeder Screw
        • Brake Abs Active Light (Blue)
        • Brake Fluid
        • Brake Friction Material
        • Brake On - Off Switch
        • Brake Pads
        • Brake Pedals
        • Brake Shoe Hardware
        • Brake Shoes
        • Brake Stoplight Switches
        • Brake Warning Light (Amber)
        • Brake Warning Light (Red)
        • Bulb Sockets
        • Bulbs And LEDS
        • Caliper Hardware
        • Caliper Mounting Pin
        • Caliper Piston
        • Caliper Shim
        • Caliper Slider Pin (Bolt) Dust Boot
        • Caliper Slider Pin (Bolt)
        • Calipers
        • Combination Valve
        • Controllers
        • Digital Ratio Axle Controllers And Buffers (Drab And Dram)
        • Disable Switches
        • Drums
        • Electrical Brake Pumps
        • Electrical Park Motor
        • Electrical Pumps And Motors
        • Electro-Magnetic Interference
        • Electronic Brake Control Modulator
        • Electronic Brake Distribution
        • Electronic Brake Traction Control Module
        • Electronic Controllers
        • Electronic Traction Control
        • External Brake Cable
        • Flow Control Valve
        • Fluid Level Sensor Switches
        • Fluid
        • Four Wheel Drive Switches
        • Friction Material
        • G Sensors
        • Gaskets
        • Gravitational Switches
        • Grease Seal
        • Height Sensing Proportioning Valve
        • High Pressure Accumulator
        • Hoses
        • Hub
        • Hydraulic Control Unit
        • Hydraulic Modulators
        • Hydro-Boosters
        • Hydro-Electric Boosters (POWERMASTER)
        • Ignition Disable Switches
        • Lamp Driver Relay
        • Lateral Acceleration Switches
        • LEDS
        • Lenses
        • Low Pressure Accumulator
        • Lug Nut
        • Master Cylinder Cover Gasket
        • Master Cylinders
        • Modulators
        • Motor Pack
        • Motors
        • Pads
        • Parking Brake Cable
        • Parking Brake Mechanism
        • Parking Brake Shoes
        • Parking Brake Switches
        • Parking Brake Systems
        • Pedal Travel Switches
        • Pedals
        • Power Distribution Center
        • POWERMASTER
        • Pressure Differential Switches
        • Pressure Switches
        • Pressure Transducers
        • Proportioning Valve
        • Pumps
        • Relays
        • RELUCTOR (Speed) Ring
        • Rotors
        • Self-Adjusting Systems
        • Shoe Hardware
        • Shoes
        • Sockets
        • Speed Sensor (RELUCTOR) Ring
        • Speed Sensors (Electronic Wheel And Vehicle)
        • Star Wheel
        • Steel Brake Lines
        • Stoplight Switches
        • Stroke Sensor
        • Switches
        • Tires
        • Tone Ring
        • Toothed Rings (Tone Wheel)
        • Traction Control System (TCS)
        • Transfer Tubes
        • Vacuum Boosters
        • Vacuum Hoses
        • Valves
        • Wear Indicator
        • Wheel Attachment Hardware
        • Wheel Bearings, Races And Seals
        • Wheel Cylinders
        • Wiring Harnesses
        • Yaw Rate Sensor
      • Brake System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Map - Routine Inspection Reference Guide
      • Routine Inspection Reference Guide
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Maintenance Overview
          • Antifreeze/Coolant
          • Visual Inspection
          • Radiator Cap Test
          • Engine Fan
          • Cooling System Power Flush And Refill
          • Belts (Except Timing Belts)
          • Belt TENSIONER
          • Automatic Transmission Fluid
          • Automatic Transmission Fluid Exchange & Filter Replacement
          • Engine Oil
          • Air Filters
          • Cabin Air Filter
          • Brake Fluid
          • Battery
          • Battery Cables
          • Power Steering
          • Power Steering Fluid
          • Wiper Blades
        • Routine Inspection CHECKSHEET
        • Routine Inspection - UICS
          • Brake Systems
            • Notes
            • Brake Fluid
            • Bulbs And LEDS
            • Hoses
            • Lenses
            • Lug Nut
            • Master Cylinder Cover Gasket
            • Parking Brake Cable
            • Vacuum Hoses
            • Wheel Attachment Hardware
            • Wheel Bearings, Races And Seals
          • Drivetrain And Transmission
            • Notes
            • Automatic Transmission Fluid
            • Clutch Master Cylinders
            • Cooler Lines
            • Coolers
            • Differential Fluid
            • Drain Plugs And Gaskets
            • Filters And Screens
            • Fluids And Lubricants
            • Hoses, Lines, And Tubes
            • Hydraulic Fluid
            • Lubricants
            • Manual Transmission Fluid
            • Mounts (Engine, Transaxle And Transmission)
            • Transfer Case Fluid
            • Vacuum Hoses
          • Electrical Systems
            • Batteries
            • Battery Cables
            • Battery Trays And Hold Down Hardware
            • Bulbs, Sealed Beams And LEDS
            • Fuses, Fusible Links And Circuit Breakers
            • Ground Cables And Straps
            • Ground Straps
            • Lenses
            • Sealed Beams
            • Washer Pumps
            • Wiper Arms And Blades
            • Wiper Hoses And Nozzles
            • Wiper Pump Reservoirs
          • Engine Performance And Maintenance
            • Notes
            • Accessory Belts
            • Air Filter Elements
            • Air Filter Gaskets
            • Air Filter Housings And Gaskets
            • Air Pump Belts
            • Batteries
            • Battery Connectors
            • Belt Idler Assemblies (Accessory And Cam Belts)
            • Belt TENSIONERS (Accessory And Cam Belt)
            • Chemical Engine DECARBONIZATION
            • Combustion Chamber Cleaning
            • Coolant Recovery Tanks
            • Coolant
            • Distributor Caps
            • Distributor Rotors
            • Engine Cooling Systems
            • Engine DECARBONIZATION
            • Engine Oil Drain Plugs And Gaskets
            • Engine Oil Filters And Canisters
            • Engine Oil
            • Fuel Filters
            • Fuel Injector Cleaning
            • Fuel Injectors
            • Fuel System Cleaning Service
            • Hose Clamps
            • Hose Connectors
            • Hose Couplers
            • Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
            • Ignition Wires (Secondary)
            • Intake Cleaning
            • O2 Sensors
            • PCV Breather Elements
            • PCV Valves
            • Radiator Caps And Pressurized Expansion Tank Caps
            • Spark Plugs
            • Thermostats And Housings
            • Throttle Body Cleaning
            • Timing Belts
            • Vacuum Hoses, Tubes And Connections (Non-Metallic)
          • Exhaust Systems
            • Notes
            • Exhaust And Tail Pipes
          • Heating, Ventilation And Air Conditioning Systems
            • Notes
            • Belts
            • Cabin Air Filters
            • Coolant
            • Evaporator Drain Tubes
            • Evaporator Filters
            • In-Line Filters
            • Vacuum Hoses And Tubes
          • Steering And Suspension, Wheel Alignment, Wheels And Tires
            • Notes
            • Hydraulic Hoses
            • Power Steering Belts
            • Power Steering Fluid
            • Power Steering Hoses
            • Shock Absorbers, Strut Cartridges And Strut Assemblies
            • Strut Rods
            • Tire Pressure Monitoring System
            • Tire Pressure Sensors
            • Tires
            • Valve Stems
            • Wheel Attachment Hardware
            • Wheel Bearings, Races And Seals
      • Wheel & Tire Supplement
        • Notes
        • Tires
        • Mounting Tires
        • Vehicle Tire Placard
        • Tire Rotation
        • Wheel Lug Nut Torque & Clamping Force
        • Popular Tire Rotation Patterns
        • Wheels And Rims
        • Tire Pressure Monitoring Systems
        • Wheels & Tires CHECKSHEET
        • Wheel & Tire - UICS
          • Tire Pressure Monitoring System
          • Tire Pressure Sensors
          • Tires
          • Wheel Alignment
          • Wheel Attachment Hardware
          • Wheels (Rims)
      • Reason Code Explanation
      • Automotive Terminology & Definitions
  • Check Lists
    • Symptom Check List Worksheet - General Information
      • * Please Read This First *
      • Purpose
        • Notes
        • Why Use the Symptom Check List Worksheets?
        • Making the Worksheets a Part of Your Normal Routine
      • Symptom Check List Worksheets
        • Condensed Version - All On One Page
        • Full Version - All On Four Pages
        • Individual System-Based Check Lists
  • Driveline/Axles
    • Drive Axle Noise Diagnosis - General Information
      • * Please Read This First *
      • Unrelated Noises
      • Non-Drive Axle Noises
      • Gear Noise
      • Chuckle
      • Knock
      • Clunk
      • Bearing Whine
      • Bearing Rumble
      • Chatter On Turns
      • Axle Shaft Noise
      • Vibration
    • Gear Tooth Contact Patterns - General Information
      • * Please Read This First *
      • Inspection
        • Notes
        • Gear Tooth Contact Pattern
      • Adjustments
        • Notes
        • Gear Backlash & Pinion Shim Changes
    • Map - Drive Train & Transmission
      • Drive Train & Transmission Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Drivetrain And Transmission
        • Notes
        • Actuators (Electrical)
        • Actuators (Vacuum)
        • Automatic Transmission / Transaxle Assemblies/CVTS
        • Automatic Transmission Fluid
        • Axles
        • Bearings And Races
        • Bell Cranks
        • Bell Housings
        • Bushings (External)
        • Cables (Speedometer)
        • Cables (TV, Detent And Shift)
        • Carrier Bearings
        • Clutch Cables And Cable Housings
        • Clutch Discs (Manual Transmissions)
        • Clutch Forks
        • Clutch Linkages (Mechanical)
        • Clutch Master Cylinders
        • Clutch Pedals
        • Clutch Pivots
        • Clutch Pressure Plates
        • Clutch Release Bearings
        • Clutch Slave Cylinders (Concentric)
        • Clutch Slave Cylinders (Conventional Or External)
        • Companion Flanges
        • Connectors
        • Cooler Bypass Valves
        • Cooler Lines
        • Coolers
        • CV Joints
        • Differential And Final Drive Assemblies
        • Differential Fluid
        • Dip Stick Tubes
        • Dip Sticks (Fluid Level Indicators)
        • Dowel Pins, Guides And Pilot Holes
        • Drain Plugs And Gaskets
        • Drive Shaft Flanges
        • Drive Shafts And Half Shafts
        • Dust Boots
        • Engine Mounts
        • Exciter Rings
        • Filler Tubes
        • Filters And Screens
        • Flanges
        • Flex Plates
        • Fluid Level Indicators
        • Fluids And Lubricants
        • Flywheels
        • Force Motors
        • Gaskets
        • Guides
        • Half Shafts
        • Hoses, Lines, And Tubes
        • Housings (Bell, Case, Tail(Extension) And Auxiliary)
        • Hydraulic Fluid
        • Intermediate Shaft Support Bearings
        • Key Interlock Systems
        • Limited Slips
        • Lines
        • Linkages (External)
        • Locking Hub Assemblies
        • Locking Hub Control Knobs
        • Lubricants
        • Manual Transmission Fluid
        • Manual Transmission/Transaxle Assemblies
        • Metal Clad Seals
        • METALASTIC Joints
        • Modulator Pins
        • Modulators
        • Mounts (Engine, Transaxle And Transmission)
        • Odometer Drives (Mechanical)
        • Odometer Heads (Mechanical)
        • Oil Pans
        • Pans
        • Pilot Holes
        • Pressure Plates
        • Pressure Switches
        • Races
        • Rubber Joints (METALASTIC)
        • Screens
        • Seals (Metal Clad)
        • Seals
        • Selector Interlock Systems
        • Sensors
        • Servos
        • Shift Interlock Systems (Selector And Key Interlock Systems)
        • Side Covers
        • Slip Yokes
        • Solenoids
        • Speed Sensors (Electronic Wheel And Vehicle)
        • Speedometer- Driven Gear Housing
        • Speedometer/Odometer Drives (Mechanical)
        • Speedometer/Odometer Heads (Mechanical)
        • Speedometers/Odometers (Electronic)
        • Switches
        • Tone Wheels
        • Toothed Rings (Tone Wheel)
        • Torque Converters
        • Transaxle Mounts
        • Transducers (Transmission)
        • Transfer Case Assemblies
        • Transfer Case Fluid
        • Transmission Coolers
        • Transmission Mounts
        • Transmission Pans
        • Transmission Range Indicators (PRNDL)
        • Tubes
        • Universal Joints (CARDAN Or Cross Type)
        • Vacuum Controls
        • Vacuum Hoses
        • Vacuum Motors
        • Vacuum-Operated Switches
        • Vehicle Speed Sensors
        • Vents
        • Vibration Dampers
        • Wheel Attachment Hardware
        • Wheel Speed Sensors
        • Wiring Harnesses And Connectors
        • Yokes And Slip Yokes
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Trouble Shooting - Clutches - General Information
      • * Please Read This First *
      • All Models
  • Electrical
    • Map - Electrical Systems
      • Electrical Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Actuator Motors (Electric)
        • Actuator Motors (Vacuum)
        • Air Bags
        • Alternators And Generators
        • Amplifiers
        • Antennas
        • Batteries
        • Battery Cables, Wires And Connectors
        • Battery Cables
        • Battery Trays And Hold Down Hardware
        • Battery Wires
        • Belts
        • Bulb Sockets
        • Bulbs, Sealed Beams And LEDS
        • Cd Players
        • Cigarette Lighter Assemblies
        • Circuit Breakers
        • Clutch Switches
        • Connectors
        • Control Modules
        • Cruise Control Brake Switches
        • Cruise Control Cables
        • Cruise Control Clutch Switches
        • Cruise Control Linkages And Cables
        • Cruise Control Reservoirs
        • Cruise Control Tubes
        • Cruise Control Vacuum Dump Release Valves
        • Cruise Control Vacuum Hoses, Tubes And
        • Cruise Control Vehicle Speed Sensors
        • Defoggers
        • Defrosters
        • Delays
        • Dimmers
        • Electric Heaters
        • Equalizers
        • Fuse Blocks
        • Fuse Boxes And Blocks
        • Fuses, Fusible Links And Circuit Breakers
        • Fusible Links
        • Gauges
        • Generators
        • Ground Cables And Straps
        • Ground Straps
        • Headlight Adjusters
        • Heating Elements (Defrosters, Defoggers, Electric Heaters And Seats)
        • Horns And Sirens
        • Ignition Switches
        • Indicator Lights
        • Keyless Entry Keypads And Transmitters
        • Keyless Entry Transmitters
        • LEDS
        • Lenses
        • Microphones
        • Mirrors (ELECTROCHROMATIC And Heated)
        • Motors
        • Neutral Safety Switches
        • Odometers, Speedometers And Tachometers (Cable Driven)
        • Odometers
        • Power Distribution Center
        • Pulleys
        • Receivers, Amplifiers, Equalizers And Sub-Woofer Volume Controls
        • Relay Boxes
        • Relays
        • Sealed Beams
        • Seat Heaters
        • Security Alarm Sensors
        • Sirens
        • Solenoids
        • Speakers And Microphones
        • Speedometer And Tachometer Linkages And Cables
        • Speedometer Cables
        • Speedometers
        • Starters
        • Sub-Woofer Volume Control
        • Switches
        • Tachometer Cables
        • Tachometers
        • Tape Players And Cd Players
        • TENSIONERS
        • Timers
        • Transceivers
        • Transducers
        • Vacuum Accumulators (Reservoirs)
        • Voltage Regulators
        • Washer Fluid Level Senders
        • Washer Pumps
        • Wiper Arms And Blades
        • Wiper Blades
        • Wiper Hoses And Nozzles
        • Wiper Linkages
        • Wiper Nozzles
        • Wiper Pump Reservoirs
        • Wiring Harnesses And Connectors
      • Battery, Starting & Charging System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
  • Engine
    • Engine Overhaul Procedures - General Information
      • * Please Read This First *
      • Description
      • Engine Identification
      • Inspection Procedures
        • * Please Read This First *
        • General
        • Magnetic Particle Inspection
          • Notes
          • Magnaflux & Magnaglo
        • Penetrant Inspection
          • Notes
          • Zyglo
          • Dye Check
        • Ultrasonic Inspection
        • X-Ray Inspection
        • Pressure Testing
      • Cleaning Procedures
        • * Please Read This First *
        • General
        • Bead Blasting
        • Chemical Cleaning
      • Component Cleaning
        • * Please Read This First *
        • Sheet Metal Parts
        • Intake & Exhaust Manifolds
      • Cylinder Head Replacement
        • * Please Read This First *
        • Removal
        • Installation
        • Valve Adjustment
      • Cylinder Head Overhaul
        • * Please Read This First *
        • Cylinder Head Disassembly
        • Cylinder Head Cleaning & Inspection
        • Valve Springs
        • Valve Guide
          • Notes
          • Measuring Valve Guide Clearance
          • Reaming Valve Guide
          • Replacing Valve Guide
        • Valves & Valve Seats
          • Notes
          • Valve Grinding
          • Valve Lapping
          • Valve Seat Grinding
          • Valve Seat Replacement
          • Valve Seat Concentricity
        • Cylinder Head Reassembly
          • Notes
          • Valve Stem Installed Height
        • Valve Stem Oil Seals
          • Notes
          • Replacement (On-Vehicle)
        • Valve Spring Installed Height
        • Rocker Arms & Assemblies
          • Notes
          • Rocker Studs
          • Rocker Arms & Shafts
        • Push Rods
        • Lifters
          • Notes
          • Hydraulic Lifters
          • Mechanical Lifters
      • Pistons, Connecting Rods & Bearings
        • * Please Read This First *
        • Ridge Removal
        • Piston & Connecting Rod Removal
        • Piston & Connecting Rod
          • Notes
          • Disassembly
          • Cleaning
          • Inspection
        • Piston & Cylinder Bore Fit
        • Assembling Piston & Connecting Rod
        • Checking Piston Ring Clearances
        • Piston & Connecting Rod Installation
        • Connecting Rod Side Clearance
        • Main & Connecting Rod Bearing Clearance
          • Notes
          • Plastigage Method
          • Micrometer & Telescopic Gauge Method
      • Crankshaft & Main Bearings
        • * Please Read This First *
        • Removal
        • Cleaning & Inspection
        • Installation
        • Crankshaft End Play
          • Notes
          • Dial Indicator Method
          • Feeler Gauge Method
        • Cylinder Block
          • Notes
          • Block Cleaning
          • Block Inspection
          • Cylinder Bore Inspection
          • Cylinder Honing
          • Deck Warpage
          • Deck Height
          • Main Bearing Bore & Alignment
          • Expansion Plug Removal
          • Expansion Plug Installation
          • Oil Gallery Plug Removal
          • Oil Gallery Plug Installation
      • Camshaft
        • * Please Read This First *
        • Cleaning & Inspection
        • Camshaft Bearings
          • Notes
          • Removal & Installation
        • Camshaft Installation
        • Camshaft End Play
      • Timing Chains & Belts
        • * Please Read This First *
        • Timing Chains
        • Timing Belts
        • Tension Adjustment
      • Timing Gears
        • * Please Read This First *
        • Timing Gear Backlash & RUNOUT
        • Rear Main Oil Seal Installation
          • Notes
          • One-Piece Type Seal
          • Rope Type Seal
          • Split-Rubber Type Seal
      • Oil Pump
        • * Please Read This First *
        • Rotor Type
        • Gear Type
      • Break-In Procedure
        • * Please Read This First *
        • Engine Pre-Oiling
        • Initial Start-Up
        • Camshaft
        • Piston Rings
        • Final Adjustments
    • General Cooling System Service - General Information
      • * Please Read This First *
      • Description
      • Maintenance
        • Draining
        • Flushing
          • Notes
          • Radiator
          • Engine Block
        • Refilling
      • Testing
        • Thermostat
        • Pressure Testing
          • Notes
          • Radiator Cap
          • Cooling System
  • Engine Performance
    • Electrostatic Discharge Warning - General Information
      • * Please Read This First *
      • Introduction
      • Handling Static-Sensitive Circuits/Devices
      • Checking Static-Sensitive Circuits/Devices
    • Engine Performance Diagnostic Routine Outline - General Information
      • * Please Read This First *
      • Where Does DRIVEABILITY Diagnosis Start?
        • Perform Basic Inspection
        • Check For Trouble Codes
        • Diagnose Symptom
        • Test System
    • Engine Performance Safety Precautions
      • Engine Performance Safety Precautions
    • Map - Engine Performance & Maintenance
      • Engine Performance And Maintenance (Including Exhaust Systems)
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Engine Performance & Maintenance CHECKSHEET
      • Engine Performance And Maintenance
        • Notes
        • Accelerator Pedal Position Sensor
        • Accessory Belts
        • Accessory Pulleys
        • Air Conditioning Cycling Switches
        • Air Conditioning Pressure Sensors
        • Air Ducts And Tubes
        • Air Filter Elements
        • Air Filter Gaskets
        • Air Filter Housings And Gaskets
        • Air Fuel Ratio Sensors
        • Air Injection Control Solenoids
        • Air Plenums
        • Air Pump Belts
        • Air Pumps (Electric Driven)
        • Air Tubes
        • Aspirator, Check And DECEL Valves
        • Baffles
        • Ballast Primary Supply Resistor Wires
        • Ballast Resistors And Primary Supply Resistors
        • Barometric Pressure Sensors
        • Batteries
        • Battery Cables, Wires And Connectors
        • Battery Connectors
        • Battery Trays And Hold Down Hardware
        • Battery Wires
        • Belt Idler Assemblies (Accessory And Cam Belts)
        • Belt TENSIONERS (Accessory And Cam Belt)
        • Belt-Driven Air Pumps
        • Boost Control Mechanism
        • Camshaft Position Sensors
        • Carburetors And Chokes
        • Casting Core Plugs And Expansion Plugs
        • Charge Air Coolers ""INTERCOOLERS"" (CAC)
        • Check Valves
        • Chemical Engine DECARBONIZATION
        • Chokes
        • Clutch Pedal Position Switches
        • Cold Start Injectors
        • Combustion Chamber Cleaning
        • Connectors
        • Coolant Recovery Tanks
        • Coolant
        • Cooling Fan Motor Modules
        • Cooling Fan Motor Relays And Modules
        • Cooling Fan Motor Resistors
        • Cooling Fan Motor Sensors And Switches
        • Cooling Fan Motor Switches
        • Cooling Fan Motors
        • Crankshaft Position Sensors
        • Cylinder Deactivation Solenoid
        • Cylinder Head Assemblies
        • DECEL Valves
        • Deflectors
        • Dip Stick Tubes
        • Dip Sticks And Tubes
        • Distributor Advances And Retarders (Mechanical And Vacuum)
        • Distributor Boots And Shields
        • Distributor Caps
        • Distributor Retarders (Mechanical And Vacuum)
        • Distributor Rotors
        • Distributor Shields
        • Distributors
        • Early Fuel Evaporation Valves (Heat Riser Assemblies)
        • EGR Coolers
        • EGR Exhaust Manifold Passages
        • EGR Intake And Exhaust Manifold Passages
        • EGR Plates And Coolers
        • Electronic Spark Control Modules
        • Electronic Transmission Control Devices
        • Electronic Transmission Feedback Devices
        • Engine Coolant Temperature Sensors
        • Engine Cooling Systems
        • Engine Covers (Oil Pan, Valve Cover, Timing Cover)
        • Engine DECARBONIZATION
        • Engine Oil Canisters
        • Engine Oil Coolers (External)
        • Engine Oil Drain Plugs And Gaskets
        • Engine Oil Filters And Canisters
        • Engine Oil Gaskets
        • Engine Oil Pressure Gauges (Mechanical)
        • Engine Oil
        • Evaporative Emissions (EVAP) Canister Filters
        • Evaporative Emissions (EVAP) Canister Purge Devices
        • Evaporative Emissions (EVAP) Canisters
        • Evaporative Emissions (EVAP) Feedback Devices
        • Exhaust Gas RECIRCULATION Devices
        • Exhaust Gas RECIRCULATION Feedback Devices
        • Expansion Plugs
        • Fan Control Sensor
        • Fuel Accumulators And Dampers
        • Fuel And Cold Start Injectors
        • Fuel Caps
        • Fuel Dampers
        • Fuel Delivery Check Valves
        • Fuel Distributors (BOSCH Cis)
        • Fuel Filler Necks And RESTRICTORS
        • Fuel Filters
        • Fuel Injector Cleaning
        • Fuel Injectors
        • Fuel Level Senders
        • Fuel Pressure Regulators
        • Fuel Pumps (In-Tank, External, Electrical Or Mechanical)
        • Fuel Rails
        • Fuel RESTRICTORS
        • Fuel System Cleaning Service
        • Fuel Tanks
        • Fuel
        • Gaskets
        • Grommets (Valve Cover)
        • Harmonic Dampers
        • Heater Control Valves
        • Heater Cores
        • Hose Clamps
        • Hose Connectors
        • Hose Couplers
        • Hoses And Tube Couplers, Connectors And Clamps
        • Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
        • Housings
        • Idle Air Controls
        • Idle Speed Control Actuators
        • Ignition Boots
        • Ignition Coil Towers
        • Ignition Coils
        • Ignition Control Modules (ICM)
        • Ignition Switches
        • Ignition Terminals
        • Ignition Wires (Secondary)
        • Inertia Fuel Shut-Off Switches
        • Intake Air Temperature Sensors
        • Intake Cleaning
        • Intake Manifolds
        • In-Tank Fuel Strainers
        • INTERCOOLERS
        • Knock Sensors
        • Liquid Vapor Separators
        • Long Block Assemblies
        • Manifold Absolute Pressure (Map) Sensors
        • Mass Air Flow (MAF) Sensors
        • Metal Air Manifolds And Pipes
        • Metal Air Pipes
        • Mix Control Solenoids
        • Motor Mounts
        • O2 Sensors
        • Oil Pans
        • Oil Pressure Sending Units
        • Oil Pump Pick-Up Screens
        • Oil Pumps
        • O-Rings, Gaskets, Seals And Spring Locks
        • Park Neutral Position Switches
        • PCV Breather Elements
        • PCV Orifices
        • PCV Valves
        • Pick-Up Assemblies (Includes Magnetic, Hall Effect And Optical)
        • Power Steering Pressure Sensors
        • Powertrain Control Modules (Pcm) And Prom
        • Powertrain Control Prom
        • Pressurized Expansion Tank Caps
        • Radiator / Cooling Fan Blades
        • Radiator / Cooling Fan Clutches
        • Radiator Caps And Pressurized Expansion Tank Caps
        • Radiators
        • Roll Over Valves
        • Sealing Compounds
        • Seals
        • Secondary Air Injection System Management Devices
        • Sensors
        • Short Block Assemblies
        • Shrouds, Baffles And Deflectors
        • Spark Plugs
        • Spring Locks
        • Super Chargers
        • Switches
        • Thermal Vacuum Valves
        • Thermostatic Air Door Assemblies
        • Thermostats And Housings
        • Throttle Bodies
        • Throttle Body Cleaning
        • Throttle Cables
        • Throttle Linkages And Cables
        • Throttle Position Sensors
        • Throttle Position Switches
        • Timing Belt Sprockets
        • Timing Belts
        • Timing Covers
        • Torque Struts
        • Transmission Range Switches
        • Tube Clamps
        • Tube Connectors
        • Tube Couplers
        • Tubes
        • Turbo Chargers
        • Vacuum Connections
        • Vacuum Hoses, Tubes And Connections (Non-Metallic)
        • Vacuum Regulator Solenoids
        • Vacuum Tubes
        • Valve Covers
        • Vehicle Speed Senors
        • Volume Air Flow Sensors
        • Waste Gate And Boost Control Mechanisms
        • Waste Gate Control Solenoids
        • Water Pumps (Electric)
        • Water Pumps (Non-Electric)
        • Wiring Harnesses And Connectors
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Parasitic Load Explanation & Test Procedures - General Information
      • * Please Read This First *
      • General Information
      • Testing For Parasitic Load
        • Notes
        • CHRYSLER Ignition Off Draw (IOD) Test
        • Test Procedure Using Test Switch
        • Intermittent Parasitic Load Problems
        • Diode Check & Solenoid Test
        • Quad Driver Test
    • State Emission Standards - Diesel
      • ARIZONA
      • Colorado
      • CONNECTICUT
      • IDAHO
      • KENTUCKY
      • MASSACHUSETTS
      • New YORK
      • OHIO
      • RHODE Island
      • UTAH
      • WASHINGTON
    • State Emission Standards - Gas
      • ALASKA
      • ARIZONA
      • CALIFORNIA
        • California Emission Standards ASM Tests
        • Legend
        • Pass/Fail Emission Standards = A+B / VTW
      • Colorado
      • CONNECTICUT
      • DELAWARE
      • District Of COLUMBIA
      • GEORGIA
      • IDAHO
      • ILLINOIS
      • INDIANA
      • KENTUCKY
      • MARYLAND
      • MASSACHUSETTS
      • MISSOURI
      • NEVADA
      • New Jersey
      • New MEXICO
      • New YORK
      • North CAROLINA
      • OHIO
      • OREGON
      • PENNSYLVANIA
      • RHODE Island
      • TENNESSEE
      • TEXAS
      • UTAH
      • VIRGINIA
      • WASHINGTON
      • WISCONSIN
      • U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
      • U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
      • U.S. EPA Im240 Emission Standards
        • Start-Up Standards
        • Final Standards
    • Waveforms - Injector Pattern Tutorial - General Information
      • * Please Read This First *
      • Purpose Of This Article
        • Notes
        • Scope Of This Article
      • Is A Lab Scope Necessary?
        • Introduction
        • Overview Of NOID Light
          • Notes
          • Use the Right Noid Light
        • Overview Of DVOM
          • Notes
          • Checking Injector Resistance
          • Checking Available Voltage At the Injector
          • Checking Injector On-Time With Built-In Function
          • Checking Injector On-Time With Dwell Or Duty
          • How A Duty Cycle Meter and Dwell Meter Work
          • Strengths of Dwell/Duty Meter
          • Weaknesses of Dwell/Duty Meter
      • The Two Types Of Injector Drivers
        • Notes
        • Overview
        • Voltage Controlled Circuit ("Saturated Switch")
        • Current Controlled Circuit ("Peak & Hold")
      • The Two Ways Injector Circuits Are Wired
      • Interpreting Injector Waveforms
        • Notes
        • Interpreting A Voltage Controlled Pattern
        • Interpreting A Current Controlled Pattern
      • Current Waveform Samples
        • Notes
        • Example #1 - Voltage Controlled Driver
        • Example #2 - Voltage Controlled Driver
        • Example #3 - Voltage Controlled Driver
        • Example #4 - Current Controlled Driver
        • Example #5 - Current Controlled Driver
        • Example #6 - Current Controlled Driver
        • Example #7 - Current Controlled Driver
        • Example #8 - Current Controlled Driver
      • Voltage Waveform Samples
        • Notes
        • Example #1 - Voltage Controlled Driver
        • Example #2 - Voltage Controlled Driver
        • Example #3 - Voltage Controlled Driver
        • Example #4 - Current Controlled Driver
        • Example #5 - Current Controlled Driver
        • Example #6 - Current Controlled Driver
        • Example #7 - Current Controlled Driver
        • Example #8 - Current Controlled Driver
  • Map - Exhaust Systems
    • Exhaust Systems
      • Notes
      • Map Standards Of Service
      • The Map Process - Overview
      • The Map Process - Overview Of Service Requirements And Suggestions
      • Catalytic Converters
      • Exhaust And Tail Pipes
      • Exhaust Connections
      • Hangers
      • Heat Risers (Mechanical EFE Devices)
      • Heat Shields
      • Manifolds (Cast And Tube Type)
      • Mechanical EFE Devices
      • Muffler Valve
      • Mufflers And Resonators
    • Reason Code Explanation
  • Heating, Ventilation & A/C (HVAC)
    • Map - Heating, Ventilation, & Air Conditioning
      • Heating, Ventilation & Air Conditioning Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Accumulators
        • Actuators (Electrical)
        • Actuators (Vacuum)
        • Air Conditioning Fittings
        • Air Conditioning Hoses
        • Air Conditioning Metal Lines
        • Air Control Doors
        • Air Dams (External)
        • Air Distribution System
        • Belts
        • Blend Doors
        • Blower Fans (Blower Wheel Or Squirrel Cage)
        • Blower Motors
        • Blower Resistors
        • Blower Switches
        • Cabin Air Filters
        • Circuit Breakers
        • Compressor Clutch Assemblies
        • Compressors
        • Condenser Air Seals
        • Condenser Fan Motors
        • Condensers
        • Connectors
        • Control Cables
        • Control Heads (Function Selectors)
        • Control Linkages
        • Control Modules
        • Coolant
        • Cooling Fan Blades
        • Cooling Fan Clutches
        • Cooling Fan Motors
        • Evaporator Drain Tubes
        • Evaporator Filters
        • Evaporator Pressure Regulators (EPRS)
        • Evaporators
        • Expansion Valves
        • Function Selectors
        • Fuses, Fusible Links And Circuit Breakers
        • Fusible Links
        • Gaskets
        • Heater Cases
        • Heater Control Valves
        • Heater Cores
        • Heater Hoses
        • High Pressure Relief Valves (HPRV)
        • Idlers
        • In-Line Filters
        • Metal Fittings
        • Metal Lines
        • Mix And Air Control Doors (Blend Doors)
        • ORIFACE Tubes
        • O-Rings
        • Pilot-Operated Absolutes (POAS)
        • Plenums
        • Pressure Control Valves
        • Pressure Sensors
        • Pulleys
        • Radiators
        • Receiver-DRIERS
        • Refrigerant Oil
        • Refrigerant
        • Relays
        • Seals
        • Service Ports
        • Spring Lock Couplings
        • Suction Throttling Valves (STVS)
        • Switches (Electrical)
        • TENSIONERS
        • Thermistors And Pressure Sensors
        • Thermostats And Housings
        • Vacuum Hoses And Tubes
        • Vacuum Reservoirs
        • Vacuum Tubes
        • Valves In Receiver (VIRS)
        • Water Pumps (Electric Auxiliary)
        • Wiring Harnesses And Connectors
      • Heating, Ventilation & Air Conditioning System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
  • Identification
    • CANADIAN Model Cross-Reference
      • * Please Read This First *
      • ACURA
      • ASUNA
      • AUDI
      • BMW
      • CHRYSLER Corp.
        • CHRYSLER
        • Dodge
        • Eagle
        • PLYMOUTH
      • General Motors
        • BUICK
        • CHEVROLET
        • GMC
        • OLDSMOBILE
        • Optima
        • PONTIAC
      • HYUNDAI
      • Jaguar
      • KIA
      • MAZDA
      • MERCEDES-BENZ
      • Mercury
      • MERKUR
      • MITSUBISHI
      • NISSAN
      • RENAULT
      • SATURN
      • Smart
      • SUBARU
      • SUZUKI
      • TOYOTA
      • VOLKSWAGEN
      • VOLVO
      • All Others
    • Euro English-To-U.S. Translations
      • Introduction
  • Metric Conversions
    • Engine Displacement Conversion Table - ECAT
      • Conversion Table
    • Metric Conversions
      • Metric Conversions
        • Notes
        • Length
        • Volume
        • Torque
        • Pressure
      • Conversion Factors
  • OEM General Information
    • 01 - Sales Check -- CARRERA (997)
      • WM 0100IN Alarm System: Checking Operation Of Control System (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Checking Operation Of Control System
      • WM 010000 Checking Exterior Equipment And Paintwork (All Models)
        • Checking Exterior Equipment And Paintwork
          • Checking Exterior Equipment
          • Checking Paintwork
      • WM 010000 Checking Glazing (All Models)
        • Checking Glazing
      • WM 010000 Checking Lids And Doors (All Models)
        • Checking Lids And Doors
          • Checking Lid Lock, Front And Rear
          • Checking Safety Hook, Front Lid
          • Function Test On Door Locks
          • Functional Check Of Tank Cap Lock
      • WM 0100IN Checking Operation Of Electrical Equipment As Well As Warning And Indicator Lights (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Checking Electrical Equipment
      • WM 010000 Checking The Function Of The Vehicle's Lights (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Check Lighting
        • Adjusting Main Headlights
        • Adjusting The Main Headlights, Usa Version
        • Checking Horn Function
        • Check And Adjust Clock
      • WM 010000 Checking Vehicle Equipment For Completeness (All Models)
        • Checking Vehicle Equipment For Completeness
          • Checking Vehicle Equipment For Completeness, Coupe
          • Checking Cabriolet Vehicle Equipment For Completeness
        • Tools And Materials
          • Coupe Tools
          • Cabriolet Tools
      • WM 010000 Checking Vehicle Identification Number (All Models)
        • Checking Vehicle Ident. No. For Conformity
      • WM 010000 Interior Equipment: Visual Inspection For Damage And Soiling (All Models)
        • Check Interior Equipment
        • Checking Seat Belts
          • Functional Check
          • Condition Inspection
      • WM 010000 Mobile Roofs: Checking Operation (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Checking Sunroof
          • Checking Sliding Roof
      • WM 010000 Removing Transport Lock (Spring Strut Locking Devices) (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • General
        • Removing Spring Strut Locking Devices
      • WM 010000 Removing Transport Protection (All Models)
        • Technical Values
        • Removing External Transport Protection
        • Removing Internal Transport Protection
        • Removing Transport Lock (Spring Strut Locking Device) - As Of MY 2005
          • General Information On Removing The Transport Lock (Spring Strut Locking Device)
          • Removing Spring Strut Locking Devices
        • Removing Main Power Supply Switch
        • Information
          • Switching On Vehicle Electrical System
          • Switching Off Vehicle Electrical System
      • WM 010000 Windscreen Washer/Headlight Cleaning System: Check Operation, Nozzle Settings (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Windscreen Washer/Headlight Cleaning System: Check Operation, Nozzle Settings
          • Notes
          • Mix Ratio Of Fluids For Windscreen Washer System
          • Checking Wiper Blades
      • WM 010100 Sales Check (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Sales Check
      • WM 010101 Checking Wheel Mounting (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Checking Wheel Mounting
      • WM 010123 Fitting Front Spoiler (911 CARR. 4 Coupe, 911 Turbo CABRIO)
        • Technical Values
        • Fitting Front Spoiler
      • WM 0101IN Diagnostic System: Reading Out Fault Memory And Activating Systems (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Performing Vehicle Handover
        • Reading Out And Erasing Fault Memories
      • WM 0101IN Test Drive - Sales Check (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Test Drive - Sales Check
    • 09 - PORSCHE System Components -- CARRERA (997)
      • WM 090595 PORSCHE Cd - Special Tool For Checking Noise And Vibrations (All Models)
        • Tools
        • General Information On Checking Frequency Stimulation Via The Sound System
        • Procedure
    • 0X - Complete Vehicle - General -- CARRERA (997)
      • WM 0X00IN Overview Of A, B And C Markets (All Models)
        • Information
          • Overview of A, B and C markets
      • WM 0X01IN Checking The Function Of Electrical Equipment, As Well As The Indicator And Warning Lights (All Models)
        • Checking electrical equipment
      • WM 0X01IN Checking The Function Of The Vehicle's Lights (All Models)
        • Technical values
        • Check lighting
        • Adjusting main headlights
        • Adjusting the main headlights, USA version
        • Checking horn function
        • Check and adjust clock
      • WM 0X01IN Windscreen Washer/Headlight Cleaning System: Checking Operation, Nozzle Settings (All Models)
        • Windscreen washer/headlight cleaning system: checking operation, nozzle settings
          • Windscreen washer/headlight cleaning system: Check operation, nozzle settings
          • Mix ratio of fluids for windscreen washer system
          • Checking wiper blades
      • WM 0X01IN Checking Lids And Doors (All Models)
        • Checking lids and doors
          • Checking lid lock, front and rear
          • Checking safety hook, front lid
          • Function test on door locks
          • Functional check of tank cap lock
      • WM 0X03IN Visual Inspection: Brake Lines/Brake Pads/Brake Discs (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Information
          • Brake hoses and lines
          • Brake system: visual inspection of brake pads and brake discs for wear
      • WM 0X03IN Running Gear Maintenance: Steering Gear - Visual Inspection Of Bellows And Tie Rod Joints(CARR. Coupe, CARR. S Coupe, Sport Classic, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Checking
          • Checking bellows
      • WM 0X03IN Running Gear Maintenance: Axle Joints/Drive Shafts(CARR. Coupe, CARR. S Coupe, Sport Classic, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Information
          • Axle joints: checking play and dust boots
          • Drive shafts: visual inspection of boots
      • WM 0X03IN Battery Maintenance: Checking Functional State And Fluid Level(CARR. Coupe, CARR. S Coupe, Sport Classic, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS, Turbo S Coupe, Turbo S CABRIO, Speedster, Gt2 RS)
        • Technical values
        • Checking battery
      • WM 0X03IN Test Drive - Maintenance (All Models)
        • Test drive - maintenance
      • WM 0X03IN Maintenance For Hood (All Models)
        • Information on lubricants used for convertible top maintenance
        • Lubricating Z-flap on rear side trim panel
        • Lubricating convertible top
        • Lubricating convertible-top compartment lid
        • Lubricating windstop
  • Reset Procedures
    • ATEQ TPMS Reset Procedure
      • ATEQ TPMS Reset Procedure
    • Maintenance Reminder Light (Reset Procedures)
      • Emissions Maintenance Reminder
        • Notes
        • Emissions Maintenance Reminder Reset Procedure
      • Maintenance Service Reminder
        • Notes
        • Maintenance Service Reminder Reset - Procedure 01
          • Notes
          • PIWIS Tester 9718
          • PIWIS Tester II 9818
          • PIWIS Tester 3 9900
        • Maintenance Service Reminder Reset - Procedure 02
        • Maintenance Service Reminder Reset - Procedure 03
      • Timing Belt Tension Reminder
        • Notes
        • Timing Belt Tension Reminder Reset Procedure
      • Tire Pressure Monitor System Reminder
        • Notes
        • TPMS Wheel Electronics Identification
        • TPMS Reminder Reset - Procedure 01
        • TPMS Reminder Reset - Procedure 02
          • Notes
          • Tire Pressure Monitor System Reset
          • "Selection After Warning" Reset
            • Notes
            • Adding Air
            • Wheel Change
            • Sealing Set
        • TPMS Reminder Reset - Procedure 03
    • Tire Pressure Monitor Systems
      • Description & Operation
        • Notes
        • Tire Pressure Monitor (TPM) System
        • Tire Pressure Monitor Warning Messages
      • TPMS Reset Procedures
        • Notes
        • Tire Pressure Monitor System Reset
          • Notes
          • Vehicles WITHOUT Multifunction Steering Wheel
          • Vehicles WITH Multifunction Steering Wheel
      • Dismounting/Mounting Procedures
        • Notes
        • Tire Pressure Sensor
          • Notes
          • Removal
          • Installation
      • Torque Specifications
  • Specifications Index
    • Common Specs & Procedures
      • Specifications Index
  • Steering
    • Map - Steering, Suspension, Wheel Alignment, Wheels & Tires
      • Steering & Suspension Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Wheel And Tire
        • Notes
        • Tires
        • Mounting Tires
        • Vehicle Tire Placard
        • Tire Rotation
        • Wheel Lug Nut Torque & Clamping Force
        • Popular Tire Rotation Patterns
        • Wheels And Rims
        • Tire Pressure Monitoring Systems
      • Steering & Suspension CHECKSHEET
      • Wheels & Tires CHECKSHEET
      • Steering And Suspension, Wheel Alignment, Wheels And Tires
        • Notes
        • Active Handling
        • Active Suspension Control Modules
        • Active Variable Ratio Steering
        • Active Yaw Control
        • Adaptive Cruise Control
        • Advance TRAC
        • Air Bags
        • Air Ride Control Modules
        • Air Ride Suspension Torsion Springs (Counter Balancing)
        • Air Ride Suspension
        • Air Ride Tubes
        • Air Shocks And Air Struts
        • Air Spring Valves
        • Air Springs
        • Air Suspension Control Valves
        • Air Suspension DRIERS
        • Axle Acceleration Sensor
        • Ball Joints
        • Body Acceleration Sensor
        • Bushings
        • Center Links
        • Compressors
        • Continuous Damping Control
        • Control Arm Shafts
        • Control Arms
        • Control Modules
        • Distance Regulation Control Module
        • Distance Regulation Sensor
        • Drag Links
        • Dynamic Stability Control
        • Dynamic Stability Traction Control
        • Electronic Ride Control Shocks And Struts
        • Electronic Stability Control
        • Electronic Suspension System
        • Flex Couplers
        • Gaskets
        • Height Sensors
        • Hydraulic Hoses
        • Hydraulic Power Steering Pumps
        • Hydraulic Suspension Hoses
        • Hydraulic Suspension Pumps
        • Idler Arms
        • Intermediate Shaft U-Joints
        • King Pins
        • Modules
        • Pitman Arms
        • Power Steering Belts
        • Power Steering Coolers
        • Power Steering Fluid
        • Power Steering Hoses
        • Power Steering Lines (Steel)
        • Power Steering Pumps - Electric
        • Power Steering Pumps
        • Radar Sensor
        • Radius Arms
        • Relay Rods
        • Relays
        • Sensors
        • Shock Absorbers, Strut Cartridges And Strut Assemblies
        • Spindles
        • Springs, Coil, Leaf And Torsion Bars
        • STABILITRAC
        • Stability Management System
        • Steering Angle Sensor
        • Steering Arms
        • Steering Couplers
        • Steering Dampers
        • Steering Gears (Except Rack And Pinion)
        • Steering Gears, Rack And Pinion
        • Steering Knuckles
        • Strike Out Bumpers
        • Strut Bearing Plate Assemblies
        • Strut Rods
        • Suspension Pumps (Hydraulic)
        • Sway Bar Links
        • Sway Bar Mounting Bushings
        • Sway Bars
        • Switches
        • Tie Rod Ends (Inner And Outer)
        • Tire Pressure Monitoring System
        • Tire Pressure Sensors
        • Tires
        • Torque Sensor
        • Torsion Springs
        • Track Bar Bushings
        • Track Bars
        • Trailing Arm Bushings
        • Trailing Arms
        • Valve Stems
        • Vehicle Dynamics Control
        • Vehicle Speed Sensor
        • Vehicle Stability Assist
        • Vehicle Stability/Skid Control
        • Warning Lamps
        • Wheel Alignment
        • Wheel Attachment Hardware
        • Wheel Bearings, Races And Seals
        • Wheels (Rims)
        • Wiring Harnesses And Connectors
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Wheel Alignment Theory & Operation - General Information
      • * Please Read This First *
      • Pre-Alignment Instructions
        • Notes
        • General Alignment Checks
      • Adjustments
        • Notes
        • Camber
        • Caster
        • Toe-In Adjustment
        • Toe-Out On Turns
        • Steering Axis Inclination
  • Traction Control Disable Procedures
    • Traction Control Disable
  • Trouble Shooting - Manual Transmission - General Information
    • * Please Read This First *
    • Introduction
• Heating, Ventilation & A/C (HVAC)
  • A/C Compressor
    • 87 - Air Conditioning -- CARRERA (997)
      • WM 8700IN Instructions For Repairing Air-Conditioning Systems And Storing Spare Parts (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Instructions For Repairing Air-Conditioning Systems And Storing Spare Parts
      • WM 870000 Safety Regulations For Extraction And Filling Systems
        • Safety Regulations For Extraction And Filling Systems
      • WM 8700AW Safety Regulations For Working On Air-Conditioned Vehicles And Dealing With Refrigerant R134A (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • General Safety Regulations For Refrigerants
        • Emptying The Refrigerant Circuit
        • Working On The Refrigerant Circuit
        • Painting Work On Vehicles With Air Conditioning
        • Notes On General Repairs
      • WM 8700IN Technical Data, Air-Conditioning System (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Technical Values
        • Technical Data For Air-Conditioning System
        • Tightening Torques For Air-Conditioning System
      • WM 870101 Checking Air Conditioning (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Tools
        • Troubleshooting The Air Conditioning System Following Complaints About Cooling Output
        • Troubleshooting The Air Conditioning System Following Complaints About Noises
      • WM 8701IN Nominal Values For Pressures And Temperatures (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Notes
        • General Test Prerequisites
      • WM 870219 Removing And Installing Air Conditioning Control (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Tools
        • Preliminary Work
          • Preliminary Work For Removing And Installing Air-Conditioning System Regulator
        • Removing Air Conditioning Control
          • Removing Air-Conditioning System Regulator
        • Installing Air Conditioning Control
          • Installing Air-Conditioning System Regulator
        • Subsequent Work
          • Subsequent Work For The Air-Conditioning System Regulator
        • Coding Air Conditioning Control
      • WM 870317 Draining And Filling In Refrigerant (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
          • Overview
          • Servicing Equipment
        • General Warning Notes
          • Warning Notes For Handling Refrigerant
        • Draining And Filling In Refrigerant
          • Assembly Work Involving The Refrigerant System
          • General Assembly Sequence
      • WM 871319 Removing And Installing Temperature Sensor For Evaporator (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary Work For Temperature Sensor For Evaporator
        • Removing Temperature Sensor For Evaporator
        • Installing Temperature Sensor For Evaporator
        • Subsequent Work
          • Subsequent Work For Temperature Sensor For Evaporator
      • WM 871419 Removing And Installing Sun Sensor (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Removing Sun Sensor
          • Remove Sun Sensor
        • Installing Sun Sensor
      • WM 872019 Removing And Installing Servo Motor For Temperature Mixing Flap (Pink) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Servo Motor For Temperature Mixing Valve
        • Removing Servo Motor For Temperature Mixing Flap
        • Installing Servo Motor For Temperature Mixing Flap
        • Subsequent Work
          • Subsequent Work - Servo Motor For Temperature Mixing Valve
      • WM 872019 Removing And Installing Servo Motor For Central Distributor Flap (Green) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work - Servo Motor For Central Distributor Flap
        • Removing Servo Motor For Central Distributor Flap
        • Installing Servo Motor For Central Distributor Flap
        • Subsequent Work
          • Subsequent Work - Servo Motor For Central Distributor Flap
      • WM 872019 Removing And Installing FOOTWELL/Defrost (Yellow) Servo Motor (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Footwell/Defrost Servo Motor
        • Removing Footwell/Defrost Servo Motor
        • Installing Footwell/Defrost Servo Motor
        • Subsequent Work
          • Subsequent Work For Footwell/Defrost Servo Motor
      • WM 872719 Removing And Installing Magnetic Clutch (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt2,)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Magnetic Clutch
        • Removing Magnetic Clutch
        • Installing Magnetic Clutch
        • Checking The Magnetic Clutch
          • Checking Air Gap Of Magnetic Clutch
        • Subsequent Work
          • Subsequent Work For Magnetic Clutch
      • WM 873419 Removing And Installing Air-Conditioning Compressor (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
        • General Warning Notes
          • General Warning Notes For Air-Conditioning Compressor
        • Tools And Materials
          • Tools For Air-Conditioning Compressor
        • Removing Air-Conditioning Compressor
        • Installing Air-Conditioning Compressor
        • Subsequent Work
        • Checking Refrigerant Oil In "New" Air-Conditioning Compressor
          • Correct The Refrigerant Oil Level In The "New" Air Conditioning Compressor
          • Determining Oil Quantity On The "Old" Air Conditioning Compressor
          • Determining Oil Quantity On The "New" Air Conditioning Compressor
        • Work Steps For Blocked Or Seized Up Air-Conditioning Compressor
      • WM 874219 Removing And Installing Condenser-Condenser Line (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Line Condenser-Condenser
        • Removing The Condenser-Condenser Line
          • Removing Condenser-Condenser Line
        • Installing The Condenser-Condenser Line
          • Installing Condenser-Condenser Line
        • Subsequent Work
          • Subsequent Work For Line Condenser-Condenser
      • WM 874319 Removing And Installing Compressor-Condenser Line At Front (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work On Compressor-Condenser Line
        • Removing Compressor-Condenser Line
        • Installing Compressor-Condenser Line
        • Subsequent Work
          • Subsequent Work On Compressor-Condenser Line
      • WM 874319 Removing And Installing Compressor-Condenser Line In Area Of Engine (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work On Compressor-Condenser Line
        • Removing Compressor-Condenser Line
        • Installing Compressor-Condenser Line
        • Subsequent Work
          • Subsequent Work On Compressor-Condenser Line
      • WM 8743IN Laying Compressor/Condenser Line (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Laying Compressor/Condenser Line
      • WM 874519 Removing And Installing Compressor-Evaporator Line Near The Engine (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt2)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Compressor/Evaporator Line
        • Removing Compressor-Evaporator Line
        • Installing Compressor-Evaporator Line
        • Subsequent Work
          • Subsequent Work On Compressor/Evaporator Line
      • WM 874519 Removing And Installing Compressor-Evaporator Line (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work On Compressor/Evaporator Line
        • Removing Compressor-Evaporator Line
        • Installing Compressor-Evaporator Line
        • Subsequent Work
          • Subsequent Work On Compressor/Evaporator Line
      • WM 8745IN Laying Compressor/Evaporator Line (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Laying Compressor/Evaporator Line
      • WM 874619 Removing And Installing Condenser-Fluid Tank Line (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Line Condenser-Fluid Tank
        • Removing The Condenser-Fluid Tank Line
          • Removing Condenser-Fluid Tank Line
        • Installing The Condenser-Fluid Tank Line
        • Subsequent Work
          • Subsequent Work For Line Condenser-Fluid Tank
      • WM 874719 Removing And Installing Evaporator-Fluid Tank Line (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work Line Condenser-Fluid Tank
        • Removing The Condenser-Fluid Tank Line
        • Installing The Condenser-Fluid Tank Line
        • Subsequent Work
          • Subsequent Work Line Condenser-Fluid Tank
      • WM 875019 Removing And Installing Condenser (Except 911 (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Condenser
        • Removing The Condenser
        • Installing The Condenser
        • Subsequent Work
          • Rework On Condenser
      • WM 875519 Removing And Installing Dryer (Fluid Tank) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Dryer
        • General Warning Notes
          • General Warning Notes For Working On The Air-Conditioning System
        • Tools And Materials
          • Tools For Air-Conditioning Compressor
        • Removing Dryer (Fluid Tank)
          • Removing Desiccator (Fluid Tank)
        • Installing Dryer (Fluid Tank)
          • Installing Desiccator (Fluid Tank)
        • Subsequent Work
          • Subsequent Work For The Dryer
      • WM 875819 Removing And Installing Temperature Sensor (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Removing Temperature Sensor
        • Installing Temperature Sensor
      • WM 875919 Removing And Installing Outside Temperature Sensor (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Preliminary Work
          • Preliminary Work For Outside Temperature Sensor
        • Removing Outside Temperature Sensor
        • Installing Outside Temperature Sensor
        • Subsequent Work
          • Subsequent Work For Outside Temperature Sensor
      • WM 877019 Removing And Installing Expansion Valve (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Expansion Valve
        • Removing Expansion Valve
        • Installing Expansion Valve
        • Subsequent Work
          • Rework On Expansion Valve
      • WM 877819 Removing And Installing Blower Regulator (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Blower Regulator
        • Removing Blower Regulator
        • Installing Blower Regulator
        • Subsequent Work
          • Subsequent Work For Blower Regulator
      • WM 878319 Removing And Installing Pressure Switch (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Pressure Switch
        • Removing Pressure Switch
        • Installing Pressure Switch
        • Subsequent Work
          • Subsequent Work For Pressure Switch
  • General Servicing
    • 8X - Air Conditioning - General -- CARRERA (997)
      • WM 8X00IN Technical Data - Air Conditioning System (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS, Speedster, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe, Turbo S CABRIO, Gt2 RS, Turbo S Coupe "Ed. 918 SPYDER", Turbo S CABRIO "Ed. 918 SPYDER", Gt3 RS 4.0)
        • Technical Values
        • Technical Data For Air-Conditioning System
        • Tightening Torques For Air-Conditioning System
      • WM 8X00IN Safety Regulations For Extraction And Filling Systems (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS, "Sport Classic", Turbo S Coupe, Turbo S CABRIO, Speedster, Gt2 RS, CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", Turbo S CABRIO "Ed. 918 SPYDER", Gt3 RS 4.0)
        • Safety Regulations For Extraction And Filling Systems
      • WM 8X00IN Safety Regulations For Working On Air-Conditioned Vehicles And Dealing With Refrigerant R134A (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS, Speedster, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe, Turbo S CABRIO, Gt2 RS, Turbo S Coupe "Ed. 918 SPYDER", Turbo S CABRIO "Ed. 918 SPYDER", Gt3 RS 4.0)
        • General Safety Regulations For Refrigerants
        • Emptying The Refrigerant Circuit
        • Working On The Refrigerant Circuit
        • Painting Work On Vehicles With Air Conditioning
        • Notes On General Repairs
      • WM 8X00IN Instructions For Repairing Air-Conditioning Systems And Storing Spare Parts (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS, Speedster, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe, Turbo S CABRIO, Gt2 RS, Turbo S Coupe "Ed. 918 SPYDER", Turbo S CABRIO "Ed. 918 SPYDER", Gt3 RS 4.0)
        • Instructions For Repairing Air-Conditioning Systems And Storing Spare Parts
      • WM 8X00IN Nominal Values For Pressures And Temperatures (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS, Speedster, "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe, Turbo S CABRIO, Gt2 RS, Turbo S Coupe "Ed. 918 SPYDER", Turbo S CABRIO "Ed. 918 SPYDER", Gt3 RS 4.0)
        • Notes
        • General Test Prerequisites
    • Cabin Air Filter - 997 Series
      • Removal & Installation
        • Notes
        • Cabin Air Filter
          • Notes
          • Removal & Installation (2005-2006)
  • HVAC Control Systems
    • 80 - Heating -- CARRERA (997)
      • WM 802319 REMOVING AND INSTALLING HEAT EXCHANGER(All MODELS)
        • Preliminary work
          • Preliminary work for heat exchanger
        • Removing heat exchanger
      • WM 803219 REMOVING AND INSTALLING HEAT EXCHANGER HOSE (All MODELS)
        • Tools
        • Preliminary work
          • Preliminary work for heat exchanger hose
        • Removing heat exchanger hose
        • Installing heat exchanger hose
        • Subsequent work
          • Subsequent work for heat exchanger hose
      • WM 805519 Removing and installing front footwell outlet vent
        • Technical values
        • Preliminary work
          • Preliminary work for front footwell outlet vent
        • Removing front footwell outlet vent
        • Installing front footwell outlet vent
        • Subsequent work
          • Subsequent work for front footwell outlet vent
    • 85 - Ventilation -- CARRERA (997)
      • WM 851519 Removing And Installing Heating/Fresh Air Unit (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary work for heating/fresh air unit
        • Removing Heating/Fresh Air Unit
        • Installing Heating/Fresh Air Unit
        • Subsequent Work
          • Subsequent work for heater/air-conditioning unit
      • WM 851819 Removing And Installing Particle Filter (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary work for the particle filter
        • Removing Particle Filter
        • Installing Particle Filter
        • Subsequent Work
          • Work subsequent to installing particle filter
      • WM 852219 Removing And Installing Cover (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Cover
        • Installing Cover
      • WM 853019 Removing And Installing Heater/Fresh-Air Blower Motor (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary work for heating and fresh air blower motor
        • Removing Heater/Fresh-Air Blower Motor
        • Installing Heater/Fresh-Air Blower Motor
        • Subsequent Work
          • Subsequent work for heater blower motor
      • WM 853419 Removing And Installing Air Guide (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Overview Of Air Guide
        • Preliminary Work
          • Preliminary work for defrost air guide
          • Preliminary work for left air guide
          • Preliminary work for right air guide
        • Removing Air Guide
          • Removing defrost air guide
          • Removing left air guide
          • Removing right air guide
        • Installing Air Guide
          • Installing defrost air guide
          • Installing left air guide
          • Installing right air guide
        • Subsequent Work
          • Subsequent work for defrost air guide
          • Subsequent work for left air guide
          • Subsequent work for right air guide
      • WM 855319 Removing And Installing Middle Air Vent (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Middle Air Vent
        • Installing Middle Air Vent
      • WM 855919 Removing And Installing Air Vent At Door (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing Air Vent At Door
        • Installing Air Vent At Door
      • WM 856519 Removing And Installing Ventilation Cover (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary work for ventilation cover
        • Removing Ventilation Cover
        • Installing Ventilation Cover
        • Subsequent Work
          • Subsequent work for ventilation cover
      • WM 857819 Installing And Removing Fresh/RECIRC. Air Servo Motor (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Preliminary work for fresh/recirc. air servo motor
        • Removing Fresh/Recirc. Air Servo Motor
        • Installing Fresh/Recirc. Air Servo Motor
        • Subsequent Work
          • Subsequent work for fresh/recirc. air servo motor
      • WM 858219 Removing And Installing Air Guide In Luggage Compartment (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Preliminary Work
          • Preliminary work for air guide in luggage compartment
        • Subsequent Work
          • Subsequent work for air guide in luggage compartment
• Maintenance
  • Procedures
    • 03 - Maintenance, Diagnostics -- CARRERA (997)
      • WM 0300IN Maintenance For Cabriolet Convertible Top (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO)
        • Information On Lubricants Used For Convertible Top Maintenance
        • Lubricating Z-Flap On Rear Side Trim Panel
        • Lubricating Convertible Top
        • Lubricating Convertible-Top Compartment Lid
        • Lubricating Windstop
      • WM 030000 Additional Maintenance Every 160, 000 Km/96, 000 Miles Or Every 12 Years (911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance Every 160, 000 Km/96, 000 Miles Or Every 12 Years
      • WM 0X03IN Battery Maintenance: Checking Functional State And Fluid Level (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Checking Battery
      • WM 0300IN Running Gear Maintenance: Axle Joints/Drive Shafts (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Information
          • Axle Joints: Checking Play And Dust Boots
          • Drive Shafts: Visual Inspection Of Boots
      • WM 0300IN Running Gear Maintenance: Steering Gear - Visual Inspection Of Bellows And Tie Rod Joints (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Checking
          • Checking Bellows
      • WM 0300IN Visual Inspection: Brake Lines/Brake Pads/Brake Discs (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Information
          • Brake Hoses And Lines
          • Brake System: Visual Inspection Of The Brake Pads And Brake Discs For Wear
        • Technical Values
      • WM 030000 Additional Maintenance For Race Track Use - Vehicles With Central Lock (Except 911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Speedster, 911 Gt2)
        • Additional Maintenance For Race Track Use - Vehicles With Central Lock
      • WM 030400 Oil Change Service (B Markets) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Oil Change Service (B Markets)
      • WM 030400 Oil Change Service (C Markets) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Oil Change Service (C Markets)
      • WM 031400 Intermediate Maintenance (A Markets) (All Models)
        • Intermediate Maintenance (A Markets)
      • WM 031400 Intermediate Maintenance (B Markets) (All Models)
        • Intermediate Maintenance (B Markets)
      • WM 031400 Intermediate Maintenance (C Markets) (All Models)
        • Intermediate Maintenance (C Markets)
      • WM 031600 Maintenance (A Markets) (All Models)
        • Maintenance (A Markets)
      • WM 031600 Maintenance (B Markets) (All Models)
        • Maintenance (B Markets)
      • WM 031600 Maintenance (C Markets) (All Models)
        • Maintenance (C Markets)
      • WM 032400 Minor Maintenance (Not For China) (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt3 RS)
        • Minor Maintenance (Not For China)
      • WM 032600 Major Maintenance (Not For China) (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt3 RS)
        • Major Maintenance (Not For China)
      • WM 033500 On-Board Diagnosis (OBD) (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt3 RS 911 Gt2)
        • Tools
        • Technical Values
        • Reading Out And Erasing Fault Memories
        • Resetting Service Interval
      • WM 033500 Creating Vehicle Analysis Log (Val) (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo S Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Speedster, 911 Gt2 RS, 911 Gt3 RS 911 Gt2)
        • Tools
        • Creating Vehicle Analysis Log (VAL)
      • WM 035100 Additional Maintenance Every 2 Years (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Additional Maintenance Every 2 Years
          • Notes
          • Maintenance Every 2 Years
      • 1WM 035100 Additional Maintenance Every 2 Years (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Additional Maintenance Every 2 Years
          • Notes
          • Maintenance Every 2 Years
      • WM 035200 Additional Maintenance Every 4 Years (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Additional Maintenance Every 4 Years
          • Notes
          • Maintenance Every 4 Years
      • WM 035300 Additional Maintenance After 4 Then Every 2 Years (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Additional Maintenance After 4 Then Every 2 Years
          • Notes
          • Maintenance After 4 Then Every 2 Years
      • WM 035400 Additional Maintenance After 4, 8, 10 Then Every 2 Years (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Additional Maintenance After 4, 8, 10 Then Every 2 Years
          • Notes
          • Maintenance After 4, 8, 10 Then Every 2 Years
      • WM 036000 Additional Maintenance For Drive Belt (A Markets) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance For Drive Belt (A Markets)
      • WM 036000 Additional Maintenance For Drive Belt (B Markets) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance For Drive Belt (B Markets)
      • WM 036000 Additional Maintenance For Drive Belts (C Markets) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance For Drive Belts (C Markets)
      • WM 037000 Additional Maintenance For Hood (A Markets) (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER")
        • Additional Maintenance For Hood (A Markets)
      • WM 037000 Additional Maintenance For Hood (B Markets) (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER")
        • Additional Maintenance For Hood (B Markets)
      • WM 037000 Additional Maintenance For Hood (C Markets) (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER")
        • Additional Maintenance For Hood (C Markets)
      • WM 038100 Additional Maintenance For Spark Plugs (Not For China) (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt3 RS)
        • Additional Maintenance For Spark Plugs (Not For China)
          • Additional Maintenance For Spark Plugs
      • WM 038100 Additional Maintenance For Spark Plugs (A Markets) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Additional Maintenance For Spark Plugs (A Markets)
      • WM 038100 Additional Maintenance For Spark Plugs (B Markets) (All Models)
        • Additional Maintenance For Spark Plugs (B Markets)
      • WM 038100 Additional Maintenance For Spark Plugs (C Markets) (Except 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO)
        • Additional Maintenance For Spark Plugs (C Markets)
      • WM 038200 Additional Maintenance Every 80, 000 Km/48, 000 Miles Or Every 6 Years (911 Gt3, 911 Gt2, 911 Gt3 RS)
        • Information
          • Additional Maintenance Every 80, 000 Km/48, 000 Miles Or Every 6 Years
      • WM 038300 Additional Maintenance Every 90, 000 Km/54, 000 Miles Or Every 6 Years (C Markets) (911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance Every 90, 000 Km/54, 000 Miles Or Every 6 Years (C Markets)
      • WM 038300 Additional Maintenance Every 90, 000 Km/60, 000 Miles Or Every 6 Years (A Markets) (911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance Every 90, 000 Km/60, 000 Miles Or Every 6 Years (A Markets)
      • WM 038300 Additional Maintenance Every 90, 000 Km/60, 000 Miles Or Every 6 Years (B Markets) (911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance Every 90, 000 Km/60, 000 Miles Or Every 6 Years (B Markets)
      • WM 038800 Additional Maintenance Every 180, 000 Km/108, 000 Miles Or Every 12 Years (C Markets) (911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance Every 180, 000 Km/108, 000 Miles Or Every 12 Years (C Markets)
      • WM 038800 Additional Maintenance Every 180, 000 Km/120, 000 Miles Or Every 12 Years (A Markets) (911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance Every 180, 000 Km/120, 000 Miles Or Every 12 Years (A Markets)
      • WM 038800 Additional Maintenance Every 180, 000 Km/120, 000 Miles Or Every 12 Years (B Markets) (911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Additional Maintenance Every 180, 000 Km/120, 000 Miles Or Every 12 Years (B Markets)
    • Maintenance Reminder Light (Reset Procedures)
      • Emissions Maintenance Reminder
        • Notes
        • Emissions Maintenance Reminder Reset Procedure
      • Maintenance Service Reminder
        • Notes
        • Maintenance Service Reminder Reset - Procedure 01
          • Notes
          • PIWIS Tester 9718
          • PIWIS Tester II 9818
          • PIWIS Tester 3 9900
        • Maintenance Service Reminder Reset - Procedure 02
        • Maintenance Service Reminder Reset - Procedure 03
      • Timing Belt Tension Reminder
        • Notes
        • Timing Belt Tension Reminder Reset Procedure
      • Tire Pressure Monitor System Reminder
        • Notes
        • TPMS Wheel Electronics Identification
        • TPMS Reminder Reset - Procedure 01
        • TPMS Reminder Reset - Procedure 02
          • Notes
          • Tire Pressure Monitor System Reset
          • "Selection After Warning" Reset
            • Notes
            • Adding Air
            • Wheel Change
            • Sealing Set
        • TPMS Reminder Reset - Procedure 03
• Restraints
  • Restraints Control Systems
    • 69 Occupant Protection/Personal Protection -- CARRERA (997)
      • WM 6900AW Disposal Of Airbag And Belt TENSIONER Units (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • General Warning Notes For Airbag And Belt Tensioner Units
          • Disposal Of Airbag And Belt Tensioner Units
          • Safety Procedures When Igniting Airbag Units
        • Tools And Materials
          • Tools For Airbag Units And Belt Tensioners
        • Connecting Ignition Tool
          • Driver's Side
          • Passenger's Side
          • Side Airbag
          • Head Airbag
          • Belt Tensioner
          • Triggering Of Airbag Units
      • WM 690000 Safety Regulations For Airbag And Belt TENSIONER Units (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Tools And Materials
          • Materials
        • General Warning Notes
          • General Warnings For Handling Airbag And Seat-Belt Pretensioner Units
          • Warnings About Assembly And Straightening Work
        • Information For Airbag And Belt Tensioner Units
          • Dangers For Persons And The Environment
          • Protective Measures And Rules Of Behavior
          • Behavior In Cases Of Malfunction Or Danger
          • General Information
          • Component Exchange After Airbag/Seat-Belt Pretensioner Triggering
      • WM 690101 Airbag Diagnosis (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Visual Inspection Of Airbag Units
        • Airbag Diagnosis
      • WM 690101 Checking Airbags (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Visual Inspection Of Airbag Units
      • WM 691119 Removing And Installing Front Three-Point Belt (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Seat-Belt Tensioner Unit
        • Removing Front Three-Point Belt
        • Installing Front Three-Point Belt
        • Subsequent Work
      • WM 691219 Removing And Installing Rear Three-Point Belt (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, TARGA 4, TARGA 4S, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rear Three-Point Belt
        • Installing Rear Three-Point Belt
        • Subsequent Work
      • WM 691301 Checking Seat Belts (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • General Warning Notes
          • Warning Note For Seat Belts
        • Checking Seat Belts
          • Checking Procedure For Seat Belt
          • Checking Belt Strap
          • Checking Automatic Belt Device (Locking Effect)
            • The Automatic Belt Device Has Two Locking Functions
          • Checking Look And Operation Of Seat-Belt Buckle
            • Notes
            • Check Belt Buckle
            • Checking Belt Buckle Release
          • Checking Sash Guides
          • Checking Mounting Elements And Mounting Points
      • WM 691519 Removing And Installing Six-Point Seat Belt (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Removing Six-Point Seat Belt
        • Installing Six-Point Seat Belt
      • WM 692419 Removing And Installing Front Belt Lock (Bucket Seat) (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Front Belt Lock (Bucket Seat)
        • Installing Front Belt Lock (Bucket Seat)
        • Subsequent Work
      • WM 692419 Removing And Installing Front Belt Lock (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Belt Lock
          • Removing Front Belt Lock (Driver's Seat)
          • Removing Front Belt Lock (Passenger Seat With Seat Occupancy Detection)
        • Installing Front Belt Lock
          • Installing Front Belt Lock (Driver's Seat)
          • Installing Front Belt Lock (Passenger Seat With Seat Occupancy Detection)
        • Subsequent Work
      • WM 692419 Removing And Installing Front Belt Lock (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Belt Lock
        • Installing Front Belt Lock
        • Subsequent Work
      • WM 692419 Removing And Installing Front Belt Lock (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Belt Lock
          • Removing Control Unit For Memory Seat Adjustment With Support
          • Removing Front Belt Lock
        • Installing Front Belt Lock
          • Notes
          • Installing Control Unit For Memory Seat Adjustment With Support
        • Subsequent Work
      • WM 692519 Removing And Installing Rear Belt Lock (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Rear Belt Lock
        • Installing Rear Belt Lock
        • Subsequent Work
      • WM 692619 Removing And Installing Belt Strap Guide (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Belt Strap Guide
          • Removing Bottom Belt Strap Guide
          • Removing Top Belt Strap Guide
        • Installing Belt Strap Guide
          • Installing Top Belt Strap Guide
          • Installing Bottom Belt Strap Guide
        • Subsequent Work
      • WM 693619 Removing And Installing Adjustment Fitting (Seat Belt Height Adjuster) (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARRERA 4 GTS, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Adjustment Fitting (Seat Belt Height Adjuster)
        • Installing Adjustment Fitting (Seat Belt Height Adjuster)
        • Subsequent Work
      • WM 695119 Removing And Installing Airbag Sensor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Front Airbag Sensor
          • Preliminary Work For Centre Airbag Sensor
        • General Warning Notes
          • Safety Instructions For Airbag Sensor
        • Tools And Materials
          • Tools
        • Removing Airbag Sensor
          • Removing Sensor For Front Airbag
          • Removing Sensor For Centre Airbag
        • Installing Airbag Sensor
          • Installing Sensor For Front Airbag
          • Installing Sensor For Centre Airbag
        • Reworking
          • Work In Wake Of Front Airbag Sensor
          • Work In Wake Of Centre Airbag Sensor
      • WM 695319 Removing And Installing Triggering Unit For Airbag (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Triggering Unit
        • General Warning Notes
          • General Warning Notes For Airbag Triggering Unit
        • Removing Triggering Unit For Airbag
          • Overview, Triggering Unit For The Airbag
          • Removing Triggering Unit For Airbag
        • Installing Triggering Unit
        • Subsequent Work
          • Subsequent Work For Triggering Unit
        • Programming Triggering Unit
          • Triggering Unit - Reading Out And Writing In Data
        • Coding Triggering Unit
          • Coding The Triggering Unit
      • WM 695419 Removing And Installing Contact Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Preliminary Work For Contact Unit
        • General Warning Notes
          • General Warnings For Contact Unit
        • Removing Contact Unit For Airbag
        • Installing Airbag Contact Unit
          • Installing Contact Unit For Airbag
        • Subsequent Work
          • Work In Wake Of Airbag Contact Unit
        • Calibrating Steering-Angle Sensor
      • WM 695819 Removing And Installing Driver's Airbag Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Preliminary Work For Driver's Airbag Unit
        • General Warning Notes
          • General Warnings For Driver's Airbag Unit
        • Removing Driver's Airbag Unit
        • Installing Driver's Airbag Unit
        • Subsequent Work
          • Work In Wake Of Driver's Airbag Unit
      • WM 695919 Removing And Installing Passenger's Airbag Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Passenger's Airbag Unit
          • Safety Instructions, Passenger's Airbag Unit
        • Removing Passenger's Airbag Unit
        • Installing Passenger's Airbag Unit
        • Subsequent Work
          • Reworking Passenger's Airbag Unit
      • WM 696319 Removing And Installing Side Airbag (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Side Airbag (Folding Sports Bucket Seat)
        • Installing Side Airbag (Folding Sports Bucket Seat)
        • Subsequent Work
      • WM 696319 Removing And Installing Side Airbag (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Side Airbag
        • General Warning Notes
          • General Warnings For Side Airbag
        • Removing Side Airbag
        • Installing Side Airbag
        • Reworking
          • Work In Wake Of Side Airbag
      • WM 696619 Removing And Installing The Head Airbag Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Technical Values
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Head Airbag Unit
        • Removing Head Airbag Unit
        • Installing Head Airbag Unit
        • Reworking
          • Work In Wake
      • WM 696819 Removing And Installing AWS Control Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For AWS Control Unit
        • Removing AWS Control Unit
        • Installing AWS Control Unit
        • Subsequent Work
          • Subsequent Work For AWS Control Unit
        • Programming AWS Control Unit
          • Reading And Writing Values For AWS Control Unit
      • WM 696819 Removing And Installing AWS Control Unit (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing AWS Control Unit (Folding Sports Bucket Seat)
        • Installing AWS Control Unit (Folding Sports Bucket Seat)
        • Subsequent Work
        • Programming AWS Control Unit (Folding Sports Bucket Seat)
          • Reading And Writing Values For AWS Control Unit
      • WM 6968K2 Calibrating AWS Control Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Calibrating AWS Control Unit
      • WM 697201 Checking Roll-Over Protection System (CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Tools
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Work On The Roll-Over Protection System
          • Checking Roll-Over Bar
        • Subsequent Work
      • WM 697219 Removing And Installing Roll-Over Bar (CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Roll-Over Bar Installation Overview
          • Assignment Of Roll-Over Bar And Frame For Roll-Over Protection System
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Work On The Roll-Over Protection System
        • Removing Roll-Over Bar
          • Mechanical Emergency Triggering Of The Roll-Over Protection System
          • Removing Roll-Over Bar Module
        • Installing Roll-Over Bar Module
        • Subsequent Work
      • WM 697719 Removing And Installing Frame For Roll-Over Protection System (CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Frame For Roll-Over Protection System
        • Installing Frame For Roll-Over Protection System
          • Notes
          • Diagram Of Frame For Roll-Over Protection System
        • Subsequent Work
      • WM 697755 Replacing Frame For Roll-Over Protection System (Speedster)
        • Technical Values
        • Preliminary Work
        • Disassembling Frame For Roll-Over Protection System
        • Assembling Frame For Roll-Over Protection System
        • Subsequent Work
  • Seat Belts
    • 69 Occupant Protection/Personal Protection -- CARRERA (997)
      • WM 6900AW Disposal Of Airbag And Belt TENSIONER Units (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • General Warning Notes For Airbag And Belt Tensioner Units
          • Disposal Of Airbag And Belt Tensioner Units
          • Safety Procedures When Igniting Airbag Units
        • Tools And Materials
          • Tools For Airbag Units And Belt Tensioners
        • Connecting Ignition Tool
          • Driver's Side
          • Passenger's Side
          • Side Airbag
          • Head Airbag
          • Belt Tensioner
          • Triggering Of Airbag Units
      • WM 690000 Safety Regulations For Airbag And Belt TENSIONER Units (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Tools And Materials
          • Materials
        • General Warning Notes
          • General Warnings For Handling Airbag And Seat-Belt Pretensioner Units
          • Warnings About Assembly And Straightening Work
        • Information For Airbag And Belt Tensioner Units
          • Dangers For Persons And The Environment
          • Protective Measures And Rules Of Behavior
          • Behavior In Cases Of Malfunction Or Danger
          • General Information
          • Component Exchange After Airbag/Seat-Belt Pretensioner Triggering
      • WM 690101 Airbag Diagnosis (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Visual Inspection Of Airbag Units
        • Airbag Diagnosis
      • WM 690101 Checking Airbags (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Visual Inspection Of Airbag Units
      • WM 691119 Removing And Installing Front Three-Point Belt (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Seat-Belt Tensioner Unit
        • Removing Front Three-Point Belt
        • Installing Front Three-Point Belt
        • Subsequent Work
      • WM 691219 Removing And Installing Rear Three-Point Belt (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, TARGA 4, TARGA 4S, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Rear Three-Point Belt
        • Installing Rear Three-Point Belt
        • Subsequent Work
      • WM 691301 Checking Seat Belts (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • General Warning Notes
          • Warning Note For Seat Belts
        • Checking Seat Belts
          • Checking Procedure For Seat Belt
          • Checking Belt Strap
          • Checking Automatic Belt Device (Locking Effect)
            • The Automatic Belt Device Has Two Locking Functions
          • Checking Look And Operation Of Seat-Belt Buckle
            • Notes
            • Check Belt Buckle
            • Checking Belt Buckle Release
          • Checking Sash Guides
          • Checking Mounting Elements And Mounting Points
      • WM 691519 Removing And Installing Six-Point Seat Belt (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Removing Six-Point Seat Belt
        • Installing Six-Point Seat Belt
      • WM 692419 Removing And Installing Front Belt Lock (Bucket Seat) (Gt2, Gt3, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Front Belt Lock (Bucket Seat)
        • Installing Front Belt Lock (Bucket Seat)
        • Subsequent Work
      • WM 692419 Removing And Installing Front Belt Lock (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Belt Lock
          • Removing Front Belt Lock (Driver's Seat)
          • Removing Front Belt Lock (Passenger Seat With Seat Occupancy Detection)
        • Installing Front Belt Lock
          • Installing Front Belt Lock (Driver's Seat)
          • Installing Front Belt Lock (Passenger Seat With Seat Occupancy Detection)
        • Subsequent Work
      • WM 692419 Removing And Installing Front Belt Lock (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Belt Lock
        • Installing Front Belt Lock
        • Subsequent Work
      • WM 692419 Removing And Installing Front Belt Lock (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Front Belt Lock
          • Removing Control Unit For Memory Seat Adjustment With Support
          • Removing Front Belt Lock
        • Installing Front Belt Lock
          • Notes
          • Installing Control Unit For Memory Seat Adjustment With Support
        • Subsequent Work
      • WM 692519 Removing And Installing Rear Belt Lock (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Technical Values
        • Preliminary Work
        • Removing Rear Belt Lock
        • Installing Rear Belt Lock
        • Subsequent Work
      • WM 692619 Removing And Installing Belt Strap Guide (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Belt Strap Guide
          • Removing Bottom Belt Strap Guide
          • Removing Top Belt Strap Guide
        • Installing Belt Strap Guide
          • Installing Top Belt Strap Guide
          • Installing Bottom Belt Strap Guide
        • Subsequent Work
      • WM 693619 Removing And Installing Adjustment Fitting (Seat Belt Height Adjuster) (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARRERA 4 GTS, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Removing Adjustment Fitting (Seat Belt Height Adjuster)
        • Installing Adjustment Fitting (Seat Belt Height Adjuster)
        • Subsequent Work
      • WM 695119 Removing And Installing Airbag Sensor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Front Airbag Sensor
          • Preliminary Work For Centre Airbag Sensor
        • General Warning Notes
          • Safety Instructions For Airbag Sensor
        • Tools And Materials
          • Tools
        • Removing Airbag Sensor
          • Removing Sensor For Front Airbag
          • Removing Sensor For Centre Airbag
        • Installing Airbag Sensor
          • Installing Sensor For Front Airbag
          • Installing Sensor For Centre Airbag
        • Reworking
          • Work In Wake Of Front Airbag Sensor
          • Work In Wake Of Centre Airbag Sensor
      • WM 695319 Removing And Installing Triggering Unit For Airbag (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Triggering Unit
        • General Warning Notes
          • General Warning Notes For Airbag Triggering Unit
        • Removing Triggering Unit For Airbag
          • Overview, Triggering Unit For The Airbag
          • Removing Triggering Unit For Airbag
        • Installing Triggering Unit
        • Subsequent Work
          • Subsequent Work For Triggering Unit
        • Programming Triggering Unit
          • Triggering Unit - Reading Out And Writing In Data
        • Coding Triggering Unit
          • Coding The Triggering Unit
      • WM 695419 Removing And Installing Contact Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Preliminary Work For Contact Unit
        • General Warning Notes
          • General Warnings For Contact Unit
        • Removing Contact Unit For Airbag
        • Installing Airbag Contact Unit
          • Installing Contact Unit For Airbag
        • Subsequent Work
          • Work In Wake Of Airbag Contact Unit
        • Calibrating Steering-Angle Sensor
      • WM 695819 Removing And Installing Driver's Airbag Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Preliminary Work For Driver's Airbag Unit
        • General Warning Notes
          • General Warnings For Driver's Airbag Unit
        • Removing Driver's Airbag Unit
        • Installing Driver's Airbag Unit
        • Subsequent Work
          • Work In Wake Of Driver's Airbag Unit
      • WM 695919 Removing And Installing Passenger's Airbag Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Passenger's Airbag Unit
          • Safety Instructions, Passenger's Airbag Unit
        • Removing Passenger's Airbag Unit
        • Installing Passenger's Airbag Unit
        • Subsequent Work
          • Reworking Passenger's Airbag Unit
      • WM 696319 Removing And Installing Side Airbag (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Technical Values
        • Preliminary Work
        • Removing Side Airbag (Folding Sports Bucket Seat)
        • Installing Side Airbag (Folding Sports Bucket Seat)
        • Subsequent Work
      • WM 696319 Removing And Installing Side Airbag (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Side Airbag
        • General Warning Notes
          • General Warnings For Side Airbag
        • Removing Side Airbag
        • Installing Side Airbag
        • Reworking
          • Work In Wake Of Side Airbag
      • WM 696619 Removing And Installing The Head Airbag Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Speedster)
        • Technical Values
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Head Airbag Unit
        • Removing Head Airbag Unit
        • Installing Head Airbag Unit
        • Reworking
          • Work In Wake
      • WM 696819 Removing And Installing AWS Control Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For AWS Control Unit
        • Removing AWS Control Unit
        • Installing AWS Control Unit
        • Subsequent Work
          • Subsequent Work For AWS Control Unit
        • Programming AWS Control Unit
          • Reading And Writing Values For AWS Control Unit
      • WM 696819 Removing And Installing AWS Control Unit (Folding Sports Bucket Seat) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing AWS Control Unit (Folding Sports Bucket Seat)
        • Installing AWS Control Unit (Folding Sports Bucket Seat)
        • Subsequent Work
        • Programming AWS Control Unit (Folding Sports Bucket Seat)
          • Reading And Writing Values For AWS Control Unit
      • WM 6968K2 Calibrating AWS Control Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Calibrating AWS Control Unit
      • WM 697201 Checking Roll-Over Protection System (CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
        • Tools
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Work On The Roll-Over Protection System
          • Checking Roll-Over Bar
        • Subsequent Work
      • WM 697219 Removing And Installing Roll-Over Bar (CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Roll-Over Bar Installation Overview
          • Assignment Of Roll-Over Bar And Frame For Roll-Over Protection System
        • Preliminary Work
        • General Warning Notes
          • Safety Instructions For Work On The Roll-Over Protection System
        • Removing Roll-Over Bar
          • Mechanical Emergency Triggering Of The Roll-Over Protection System
          • Removing Roll-Over Bar Module
        • Installing Roll-Over Bar Module
        • Subsequent Work
      • WM 697719 Removing And Installing Frame For Roll-Over Protection System (CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO)
        • Technical Values
        • Preliminary Work
        • Removing Frame For Roll-Over Protection System
        • Installing Frame For Roll-Over Protection System
          • Notes
          • Diagram Of Frame For Roll-Over Protection System
        • Subsequent Work
      • WM 697755 Replacing Frame For Roll-Over Protection System (Speedster)
        • Technical Values
        • Preliminary Work
        • Disassembling Frame For Roll-Over Protection System
        • Assembling Frame For Roll-Over Protection System
        • Subsequent Work
• Steering
  • Manual Steering
    • 48 - Steering -- CARRERA (997)
      • WM 4800TW Tightening Torques For Steering (All Models)
        • Technical Values
        • Tightening Torques For Power-Steering Gear
        • Tightening Torques For Hydraulic Pump (Power-Steering Pump)
        • Tightening Torques For Steering Train/Steering Wheel
      • WM 480201 Checking The Power-Steering Fluid Level (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt3 RS 4.0)
        • Information On Power-Steering Fluid
          • Notes On Power-Steering Fluid
        • Checking The Power-Steering Fluid Level
          • Checking Power-Steering Fluid Level - 911 Turbo As Of 2010 Model
      • WM 480201 Checking The Fluid Level For Power Steering (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Checking The Fluid Level For Power Steering
          • Notes On Power-Steering Fluid
          • Checking Fluid Level For Power-Assisted Steering
          • Checking The Steering System For Leaks (Visual Check)
          • Bleeding The Steering System
      • WM 480819 Removing And Installing ELV Control Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For ELV Control Unit
        • Removing ELV Control Unit
        • Installing ELV Control Unit
        • Subsequent work
          • Subsequent Work For ELV Control Unit
        • Programming ELV Control Unit
      • WM 481019 Removing And Installing Steering Wheel (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Notes
          • Warning Notes For Removing And Installing Steering Wheel
        • Removal
        • Installation
      • WM 481255 Replacing Steering Wheel Cover And PDK Rocker Switches (Module) (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
          • Notes
          • Overview Of PDK Steering Wheel
          • Information On PDK Steering Wheel With Shift Paddles
        • Preliminary Work
        • Replacing Steering Wheel Trim And Rocker Switches
          • Notes
          • Subsequent Work
      • WM 481319 Removing And Installing Trim Panel (Steering-Column Switch) (Except CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing And Installing
          • Removing And Installing Trims
      • WM 481519 Removing And Installing Steering Column (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing The Steering Column
        • Installing The Steering Column
        • Subsequent Work
      • WM 485855 Replacing Tie Rod Joint (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, 911 Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
        • Preliminary Work
        • Replacing Tie Rod Joint
        • Subsequent Work
      • WM 489019 Removing And Installing Power-Steering Gear (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • General Warning Notes
        • Removing Power-Steering Gear - Four-Wheel Drive
        • Installing Steering Gear - Four-Wheel Drive
        • Notes For Sliding Piece And Airbag Contact Unit
        • Contact Unit In Centre Position
        • Subsequent Work
      • WM 4890IN Assessment Of Steering Gear After Accident Damage (Except CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Information
          • Fundamentals
          • Assessment Of The Steering Of A Vehicle Involved In An Accident
          • Exceptional Regulation/Order Handling
      • WM 489423 Hydraulic Pump Pressure Line: Installing Support (Holder) (Turbo Coupe, Turbo CABRIO, Gt3, Gt3 RS)
        • Tools
        • Important Information
          • Support (Holder) On The Pressure Line
          • Procedure If The Holder (Modified Support/Variant 2) Is Not Installed
          • Installing holder (Modified Support) For Pressure Line
      • WM 489455 Replacing Steering Pressure Line (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • Preliminary Work
        • Removing And Installing Steering Pressure Line
          • Removing Steering Pressure Line
          • Installing Steering Pressure Line
          • Subsequent Work
      • WM 489555 Replacing Steering Return Line (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt2, Gt3 RS)
        • Tools
        • Information
        • Preliminary Work
        • Removing And Installing Steering Return Line
          • Removing Steering Return Line
          • Installing Steering Return Line
          • Subsequent Work
      • WM 489719 Removing And Installing Reservoir For Hydraulic Pump (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Information
        • Preliminary Work
        • Removing And Installing Reservoir
          • Removing Reservoir For Hydraulic Pump
          • Installing Reservoir For Hydraulic Pump
        • Subsequent Work
      • WM 489819 Removing And Installing Hydraulic Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Technical Values
        • Information On Support (Holder) For Plug-In Coupling/Pressure Line
        • Preliminary Work
        • Removing And Installing Hydraulic Pump
          • Power-Steering Pump Pulley
          • Installing Hydraulic Pump
          • Subsequent Work
      • WM 489819 Removing And Installing Hydraulic Pump - PDK And Manual Transmission (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work For Removing Hydraulic Pump
        • Removing And Installing Hydraulic Pump - PDK Transmission
          • Removing Hydraulic Pump - PDK Transmission
          • Installing Hydraulic Pump - PDK Transmission
        • Removing And Installing Hydraulic Pump - Manual Transmission
          • Removing Hydraulic Pump - Manual Transmission
          • Installing Hydraulic Pump - Manual Transmission
        • Subsequent Work After Installing Hydraulic Pump
          • Subsequent Work After Installing Hydraulic Pump
  • Power Steering
    • 48 - Steering -- CARRERA (997)
      • WM 4800TW Tightening Torques For Steering (All Models)
        • Technical Values
        • Tightening Torques For Power-Steering Gear
        • Tightening Torques For Hydraulic Pump (Power-Steering Pump)
        • Tightening Torques For Steering Train/Steering Wheel
      • WM 480201 Checking The Power-Steering Fluid Level (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt3 RS 4.0)
        • Information On Power-Steering Fluid
          • Notes On Power-Steering Fluid
        • Checking The Power-Steering Fluid Level
          • Checking Power-Steering Fluid Level - 911 Turbo As Of 2010 Model
      • WM 480201 Checking The Fluid Level For Power Steering (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Checking The Fluid Level For Power Steering
          • Notes On Power-Steering Fluid
          • Checking Fluid Level For Power-Assisted Steering
          • Checking The Steering System For Leaks (Visual Check)
          • Bleeding The Steering System
      • WM 480819 Removing And Installing ELV Control Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For ELV Control Unit
        • Removing ELV Control Unit
        • Installing ELV Control Unit
        • Subsequent work
          • Subsequent Work For ELV Control Unit
        • Programming ELV Control Unit
      • WM 481019 Removing And Installing Steering Wheel (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
          • Notes
          • Warning Notes For Removing And Installing Steering Wheel
        • Removal
        • Installation
      • WM 481255 Replacing Steering Wheel Cover And PDK Rocker Switches (Module) (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
          • Notes
          • Overview Of PDK Steering Wheel
          • Information On PDK Steering Wheel With Shift Paddles
        • Preliminary Work
        • Replacing Steering Wheel Trim And Rocker Switches
          • Notes
          • Subsequent Work
      • WM 481319 Removing And Installing Trim Panel (Steering-Column Switch) (Except CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Removing And Installing
          • Removing And Installing Trims
      • WM 481519 Removing And Installing Steering Column (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Removing The Steering Column
        • Installing The Steering Column
        • Subsequent Work
      • WM 485855 Replacing Tie Rod Joint (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, 911 Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
        • Preliminary Work
        • Replacing Tie Rod Joint
        • Subsequent Work
      • WM 489019 Removing And Installing Power-Steering Gear (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • General Warning Notes
        • Removing Power-Steering Gear - Four-Wheel Drive
        • Installing Steering Gear - Four-Wheel Drive
        • Notes For Sliding Piece And Airbag Contact Unit
        • Contact Unit In Centre Position
        • Subsequent Work
      • WM 4890IN Assessment Of Steering Gear After Accident Damage (Except CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Information
          • Fundamentals
          • Assessment Of The Steering Of A Vehicle Involved In An Accident
          • Exceptional Regulation/Order Handling
      • WM 489423 Hydraulic Pump Pressure Line: Installing Support (Holder) (Turbo Coupe, Turbo CABRIO, Gt3, Gt3 RS)
        • Tools
        • Important Information
          • Support (Holder) On The Pressure Line
          • Procedure If The Holder (Modified Support/Variant 2) Is Not Installed
          • Installing holder (Modified Support) For Pressure Line
      • WM 489455 Replacing Steering Pressure Line (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • Preliminary Work
        • Removing And Installing Steering Pressure Line
          • Removing Steering Pressure Line
          • Installing Steering Pressure Line
          • Subsequent Work
      • WM 489555 Replacing Steering Return Line (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt2, Gt3 RS)
        • Tools
        • Information
        • Preliminary Work
        • Removing And Installing Steering Return Line
          • Removing Steering Return Line
          • Installing Steering Return Line
          • Subsequent Work
      • WM 489719 Removing And Installing Reservoir For Hydraulic Pump (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Information
        • Preliminary Work
        • Removing And Installing Reservoir
          • Removing Reservoir For Hydraulic Pump
          • Installing Reservoir For Hydraulic Pump
        • Subsequent Work
      • WM 489819 Removing And Installing Hydraulic Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS)
        • Tools
        • Technical Values
        • Information On Support (Holder) For Plug-In Coupling/Pressure Line
        • Preliminary Work
        • Removing And Installing Hydraulic Pump
          • Power-Steering Pump Pulley
          • Installing Hydraulic Pump
          • Subsequent Work
      • WM 489819 Removing And Installing Hydraulic Pump - PDK And Manual Transmission (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work For Removing Hydraulic Pump
        • Removing And Installing Hydraulic Pump - PDK Transmission
          • Removing Hydraulic Pump - PDK Transmission
          • Installing Hydraulic Pump - PDK Transmission
        • Removing And Installing Hydraulic Pump - Manual Transmission
          • Removing Hydraulic Pump - Manual Transmission
          • Installing Hydraulic Pump - Manual Transmission
        • Subsequent Work After Installing Hydraulic Pump
          • Subsequent Work After Installing Hydraulic Pump
• Suspension
  • Electronic Suspension
    • 43 - Level Control, Air Suspension -- CARRERA (997)
      • WM 430119 Levelling System: Removing And Installing Function Module (Gt3, Gt3 RS)
        • Tools
        • Function module components
        • Preliminary work for removing function module
        • Removing and installing function module
          • Removing function module
          • Installing function module
        • Subsequent work for function module
      • WM 4301IN Information On Front Axle Lift System ( GT3, GT3 RS)
        • Tools
        • Key components
        • Depressurise the system (in order to replace pressure switch No. 3)
        • Information on operation
      • WM 431619 Removing And Installing PASM Control Unit (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Turbo S Coupe, Turbo S CABRIO, Gt2 RS
        • Tools
        • Removing PASM control unit
        • Installing PASM control unit
        • Programming PASM control unit
          • Reading out and writing values for PASM control unit
      • WM 433419 Removing And Installing Sensor For Body (All Models)
        • Information on acceleration sensors
        • Removing and installing front and rear sensor
          • Removing sensor
            • Remove sensor on front axle
          • Remove sensor on rear axle
        • Installing sensor
          • Installing sensor on front axle
          • Install sensor on rear axle
  • Front Suspension
    • 40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997)
      • WM 400000 Lifting The Vehicle (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt3 RS)
        • Preliminary Work
          • Lifting The Vehicle
      • WM 4000IN Tests/Notes For All-Wheel Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Information For Four-Wheel Drive Vehicles
          • Balancing Wheels On Vehicle
          • Controlled Four-Wheel Drive (PTM) On The 911 Turbo
          • Power Measurements/Function Tests On The 911 Turbo
          • Power Measurements On The 911 Carrera 4/911 Carrera 4S
          • Brake Test
          • Handbrake Test On The 911 Turbo
          • Towing
      • WM 400119 Removing And Installing Front Axle (All Models)
        • Technical Values
        • Information
          • Component Overview
        • Preliminary Work
        • Removing And Installing Front Axle
          • Removing Front Axle
          • Installing Front Axle
          • Subsequent Work
      • WM 4001TW Tightening Torques For Front Axle (All Models)
        • Technical Values
        • Tightening Torques For Cross Member/Side Member (One Component)
        • Tightening Torques For Diagonal Brace
        • Tightening Torques For Axle Strut
        • Tightening Torques For Spring Strut
        • Tightening Torques For Wheel Carrier
        • Tightening Torques For Stabilizer
        • Tightening Torques For Steering
        • Tightening Torques For Wheel Mounting
      • WM 401719 Removing And Installing Lower Front-Axle Control Arm (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Preliminary Work
          • Notes
          • Removing Trailing Arm
        • Installing Trailing Arm
        • Subsequent Work
      • WM 401819 Removing And Installing Diagonal Arm (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Removing Diagonal Arm
        • Installing Diagonal Arm
      • WM 404119 Removing And Installing Front Drive Shaft (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Drive Shaft
          • Removing Front Drive Shaft
          • Installing Front Drive Shaft
        • Subsequent Work
      • WM 405019 Removing And Installing Front Wheel Bearing Housing (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • Preliminary Work
        • Removing Wheel Bearing Housing
        • Installing Wheel Bearing Housing
          • Notes
          • Fitting Front-Axle Control Arm, Left
          • Fitting Front-Axle Control Arm, Right
        • Subsequent Work
      • WM 405719 Removing And Installing Front Wheel Bearing (All Models)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing And Installing Front Wheel Bearing
          • Removing Front Wheel Bearing
          • Installing Front Wheel Bearing
        • Subsequent Work
      • WM 405055 Replacing Front Wheel Bearing Housing (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Replacing Front Wheel Bearing Housing - Preliminary Work
        • Removing Front Wheel Bearing Housing
        • Completing (Disassembling And Assembling) Wheel Bearing Housing
        • Installing Front Wheel Bearing Housing
        • Replacing Front Wheel Bearing Housing - Subsequent Work
      • WM 407819 Removing And Installing Connecting Link (Suspension/Stabilizer) (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO)
        • Removing Front Connecting Link (Suspension/Stabilizer)
          • Notes
          • Installing Front Connecting Link (Suspension/Stabilizer)
      • WM 408519 Removing And Installing Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Tools
        • Removing And Installing Spring Strut - Preliminary Work
        • Removing front Spring Strut
        • Installing Front Spring Strut
        • Removing And Installing Spring Strut - Subsequent Work
      • WM 408519 Removing And Installing Front Spring Strut (All Models)
        • Tools
        • Information
        • Preliminary Work
        • Removing Front Spring Strut
        • Installing Front Spring Strut
          • Notes
          • Fitting Front-Axle Control Arm, Left
          • Fitting Front-Axle Control Arm, Right
        • Subsequent Work
      • WM 408537 Disassembling And Assembling Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Tools
        • Information
          • Component And Assembly Overview (With And Without PASM)
        • Disassembling And Assembling Spring Strut
          • Disassembling Spring Strut
          • Coil Spring/Compensating Plate Allocation
          • Allocation Of Vibration Dampers
          • Assembling Spring Strut
      • WM 408537 Disassembling And Assembling Front Spring Strut (All Models)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
          • Disassembling Front Spring Strut
          • Preliminary Work And Notes On Assembly
          • Assembling Front Spring Strut
    • 44 - Wheels, Tires, Suspension Alignment -- CARRERA (997)
      • WM 4400TW Adjustment Values For Suspension Alignment (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Vehicle Height
        • Wheel Alignment Values
      • WM 440519 Removing And Installing Wheel (Except CARR. GTS Coupe, CARR. GTS CABRIO, CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Information
          • Wheel Mounting
          • Wheels With Sensors For TPM
        • Removing Wheel
        • Installing Wheel
      • WM 440519 Removing And Installing Wheel With Central Bolt (All Models)
        • Tools
        • Information On Central Bolts
          • Information On Tools - Central Bolt System
          • Component Overview - Central Bolt System
        • Removing And Installing Wheel
          • Removing Wheel With Central Bolt
          • Installing Wheel With Central Bolt
      • WM 440594 Balancing/Optimizing Wheels (All Models)
        • Tools
        • Balancing/Optimizing Wheels
          • Overview
          • General
        • Explanation Of Terms
          • Geometry Error (Radial And Lateral Runout)
          • Flat Spots
          • Radial Force Variations
          • 1st Harmonic
          • Uncontrolled Matching
          • Controlled Matching
          • Tyre Seating Pressure
        • Further To 1: Fitting The Tyre On The Rim
        • Further To 2A: Measuring Radial Force Variations
        • Further To 2B: Stationary Balancing With Optimization Of Rolling Smoothness
        • Further to 3: Fitting The Wheel On The Vehicle
        • Balancing Weights
        • Attach Both Weights To The Inner Side
      • WM 4405IN Wheels And Tires/Tyre Pressure (All Models)
        • Technical values
        • Wheels, tires: Visual Inspection For Damage
        • Checking Wheel Mounting
        • Tyre Pressure Of Cold Tires (Approx. 20 °C)
        • Information
        • Notes On Mounting Tires
      • WM 441202 Checking Disc Wheels (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Checking The Radial And Lateral Runout
      • WM 442655 Replacing Tyre Sealing Compound (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Information
        • Replacing Tyre Sealing Compound (Compressed Air Bottle)
      • WM 443219 Removing And Installing Wheel Electronics (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO)
        • General Information On Wheel Electronics
        • Removing And Installing Wheel Electronics
          • Removing Wheel Electronics
        • Installing Wheel Electronics
      • WM 443419 Removing And Installing Control Unit For Tyre Pressure Monitoring (TPM) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Tyre Pressure Monitoring System (RDK) Control Module
        • Removing Control Unit For Tyre Pressure Monitoring (TPM)
          • Removing Tyre Pressure Monitoring System (Rdk) Control Module
        • Installing Control Unit For Tyre Pressure Monitoring (TPM)
        • Subsequent Work
          • Rework On Tyre Pressure Monitoring System (RDK) Control Module
        • Programming Control Unit For Tyre Pressure Monitoring (TPM)
          • Control Units - Reading And Writing Replacement Values
      • WM 443619 Removing And Installing TPM Transmitter (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Information
        • Removing TPM Transmitter
        • Removing Rear TPM Transmitter
        • Installing TPM Transmitter
          • Installing Front TPM Transmitter
          • Installing Rear TPM Transmitter
        • Subsequent Work
      • WM 443819 Removing And Installing Antenna For Tyre Pressure Monitoring (TPM) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Antenna For Tyre Pressure Monitoring (TPM)
          • Removing Antenna Of Front Tyre Pressure Monitoring System
          • Removing Antenna Of Rear Tyre Pressure Monitoring System
        • Installing Antenna For Tyre Pressure Monitoring (TPM)
          • Installing Antenna For Tyre Pressure Monitoring (TPM) At Front
          • Installing Antenna For Tyre Pressure Monitoring (TPM) At Rear
        • Subsequent Work
      • WM 443819 Removing And Installing TPM Antenna (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Information
        • Removing TPM Antenna
        • Installing TPM Antenna
        • Subsequent Work
      • WM 444019 Mounting Tires (Removing And Installing Tires) - For Vehicles With And Without TPM
        • Tools
          • Tyre Removal/Mounting Machine
          • Auxiliary Equipment
          • Requirements/Information On Removing/Mounting Tires
          • Special Notes For Tire Pressure Monitoring (TPM)
        • Removing/Mounting Tires (Removing And Installing Tires)
          • Removing Tires
          • Mounting Tires
      • WM 4440IN Information On Tires/Mounting Tires (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tires
          • Tyre Damage - Caused While Driving
          • Tyre Damage - Caused While Removing/Mounting Tires
          • Replacing Tires
          • Navigation System
          • Wheel Storage
          • Tyre Identification (Speed Classes/Tyre Age)
      • WM 449503 Suspension Alignment, Complete (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
          • General Procedure For Wheel Alignment
          • Central Bolts: Different Procedure For Wheel Alignment
        • Aligning Vehicle At Front And Rear
          • Vehicle Height (Height Check)
            • General
            • Preliminary Work
            • Front Axle
            • Rear Axle
            • Wheel Alignment
          • Rear Axle
            • Preliminary Work
            • Adjusting Camber
            • Adjusting Toe
          • Front Axle
            • Adjusting Camber
            • Adjusting caster
            • Adjusting Toe
            • Toe-Difference Angle
      • WM 449503 Suspension Alignment, Complete (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • General Procedure For Wheel Alignment
        • Central Bolts: Different Procedure For Suspension Alignment
          • Notes
          • Information On Using The Central Wheel-Alignment Adapters WE 1371 On The 911 GT3
        • Preliminary Work
        • Aligning Vehicle At Front And Rear
          • Vehicle Height/Wheel Loads
          • Basic Information On Height Changes/Wheel-Load Changes
          • Front Axle
          • Rear Axle
        • Wheel Alignment
          • Rear-Axle Wheel Alignment
          • Adjusting Camber
          • Adjusting Toe
          • Adjusting Front Camber
          • Camber Fine Adjustment
          • Adjusting Caster
          • Toe-Difference Angle
    • 4X - Chassis - General -- CARRERA (997)
      • WM 4X00IN BRAKING PERFORMANCE TEST - DATA FOR COMPULSORY VEHICLE TESTING AS PER 29 StVZO (GERMAN ROAD TRAFFIC REGULATIONS) AS OF MODEL YEAR C (2012) (ALL MODELS)
        • Braking performance test - Data for compulsory vehicle testing as per 29 StVZO (German Road Traffic Regulations)
      • WM 4X00IN Central Bolts: Conversion To Conventional Wheel Mounting - 911 CARRERA GTS (CARR. GTS Coupe, CARR. GTS CABRIO, CARRERA 4 GTS, CARRERA 4 GTS CABRIO)
        • Information
          • Central bolts: Conversion to conventional wheel mounting
          • Conversion to conventional wheel mounting (instructions for one wheel)
      • WM 4X00IN Central Wheel Lock: Component Assessment(CARR. GTS Coupe, CARR. GTS CABRIO, Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Central wheel lock: Component assessment
          • Information on component assessment
          • Wheel hub assessment
          • Assessment of wheel adapters, wheel and brake disc
      • WM 4X00IN Plug-In Couplings For Hydraulic Lines - As Of Model Year 2009 (All Models)
        • Tools
        • Information
          • Information on steering and clutch lines
          • Plug-in coupling components - as of model year 2009
          • Plug-in couplings up to model year 2008
          • Plug-in couplings as of model year 2009
          • Opening and closing plug-in couplings - as of model year 2009
      • WM 4X00IN Specifications And Revision Intervals For Race Track Use - Vehicles With Central Lock(CARR. GTS Coupe, CARR. GTS CABRIO, Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
          • Notes
          • General specifications for race track use
          • Revision intervals for race track use
      • WM 4X00IN Symptom: Brake Noise (Squealing) (All Models)
        • Information
          • Symptom: Brake noise (squealing)
          • Information on brake noise (squealing) and remedial action
        • Brake noise (squealing) - grey cast-iron brake discs
          • Notes
          • 911 C2/C4 (3.6 l) standard brakes (grey cast iron) - as of 2009 model
          • 911 Turbo (997): Standard brake (grey cast iron) - 2007 to 2009 model
          • 911 GT3 (997): Standard brake (grey cast iron) - 2007 model
          • General information about GT3 grey cast-iron brakes in composite cast design from 2010 model onwards (generation II)
      • WM 4X00IN Technical values (ALL MODELS)
        • Technical values
        • Group 44 - Wheels, tyres, suspension alignment
      • WM 4X00IN Plug-In Couplings For Hydraulic Lines - (Gt2 RS)
        • Information on steering and clutch lines
      • WM 4X00IN Lifting The Vehicle (All Models)
        • Preliminary work
          • Lifting the vehicle
      • WM 4X00IN Tests/Notes For Four-Wheel Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Information for four-wheel drive vehicles
          • Balancing wheels on vehicle
          • Controlled four-wheel drive (PTM) on the 911 Turbo
          • Power measurements/function tests on the 911 Turbo
          • Power measurements on the 911 Carrera 4/911 Carrera 4S
          • Brake test
          • Handbrake test on the 911 Turbo
          • Towing
  • Rear Suspension
    • 42 - Rear Wheel Suspension, Drive Shafts -- CARRERA (997)
      • WM 4201TW Tightening Torques For Rear Axle (All Models)
        • Technical Values
        • Tightening Torques For Rear Axle
          • Tightening Torques For Carrier Side Section/Cross Member
        • Tightening Torques For Axle Strut
          • Notes
          • Tightening Torques For Wheel Carrier
          • Tightening Torques For Spring Strut
          • Tightening Torques For Stabilizer
          • Tightening Torques For Drive Shaft
          • Tightening Torques For Plug-In Couplings For Steering Hydraulics
          • Tightening Torques For Plug-In Couplings For Clutch Hydraulic System
          • Tightening Torques For Wheel Mounting
      • WM 422119 Removing And Installing Rear Drive Shaft (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Preliminary Work
        • Removing
          • Removing Rear Drive Shaft
        • Installing
          • Installing Rear Drive Shaft
        • Subsequent Work
          • Notes
          • Checking Wheel-Alignment Values
      • WM 422855 Replacing Bellows Drive Shaft (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Information
        • Replacing Bellows Drive Shaft
      • WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear-Axle Carrier Side Section
          • Removing Rear-Axle Carrier Side Section
          • Installing Rear-Axle Carrier Side Section
          • Subsequent Work
      • WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Wheel Bearing Housing
        • Installing Wheel Bearing Housing
        • Subsequent Work
      • WM 425819 Removing And Installing Rear Wheel Bearing (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Rear Wheel Bearing
        • Installing Rear Wheel Bearing
        • Subsequent Work
      • WM 427119 Removing And Installing Rear Spring Strut (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing And Installing Spring Strut - Preliminary Work
        • Removing Spring Strut
        • Installing Spring Strut
        • Removing And Installing Spring Strut - Subsequent Work
      • WM 427137 Disassembling And Assembling Rear Spring Strut (911 Gt3 RS, 911 Gt2, 911 Gt3)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Assembling Rear Spring Strut
      • WM 427137 Disassembling And Assembling Rear Spring Strut - With And Without PASM (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Tools
        • Information
          • Component And Assembly Overview (With And Without PASM)
          • Disassembling Rear Spring Strut
          • Coil Spring/Compensating Plate Allocation
          • Rear Vibration Damper Allocation
          • Assembling Spring Strut
      • WM 427137 Disassembling And Assembling Rear Spring Strut - As Of 2010 Model (911 Gt3, 911 Gt3 RS)
        • Tools
        • Information
          • Notes About Adjustment Work On The Spring Struts
          • Component And Assembly Overview
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Preliminary Work And Notes On Assembly
          • Coil Spring/Compensating Plate Allocation
          • Assembling Rear Spring Strut
      • WM 429019 Removing And Installing Rear Anti-Roll Bar (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
        • Technical Values
        • Removing Anti-Roll Bar
        • Installing Anti-Roll Bar
      • WM 429155 Replacing Connecting Link (Suspension/Stabilizer) (911 Gt3, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
        • Removing And Installing Rear Connecting Link (Suspension/Stabilizer)
          • Removing Rear Connecting Link (Suspension/Stabilizer)
          • Installing Rear Connecting Link (Suspension/Stabilizer)
    • 44 - Wheels, Tires, Suspension Alignment -- CARRERA (997)
      • WM 4400TW Adjustment Values For Suspension Alignment (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Vehicle Height
        • Wheel Alignment Values
      • WM 440519 Removing And Installing Wheel (Except CARR. GTS Coupe, CARR. GTS CABRIO, CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Information
          • Wheel Mounting
          • Wheels With Sensors For TPM
        • Removing Wheel
        • Installing Wheel
      • WM 440519 Removing And Installing Wheel With Central Bolt (All Models)
        • Tools
        • Information On Central Bolts
          • Information On Tools - Central Bolt System
          • Component Overview - Central Bolt System
        • Removing And Installing Wheel
          • Removing Wheel With Central Bolt
          • Installing Wheel With Central Bolt
      • WM 440594 Balancing/Optimizing Wheels (All Models)
        • Tools
        • Balancing/Optimizing Wheels
          • Overview
          • General
        • Explanation Of Terms
          • Geometry Error (Radial And Lateral Runout)
          • Flat Spots
          • Radial Force Variations
          • 1st Harmonic
          • Uncontrolled Matching
          • Controlled Matching
          • Tyre Seating Pressure
        • Further To 1: Fitting The Tyre On The Rim
        • Further To 2A: Measuring Radial Force Variations
        • Further To 2B: Stationary Balancing With Optimization Of Rolling Smoothness
        • Further to 3: Fitting The Wheel On The Vehicle
        • Balancing Weights
        • Attach Both Weights To The Inner Side
      • WM 4405IN Wheels And Tires/Tyre Pressure (All Models)
        • Technical values
        • Wheels, tires: Visual Inspection For Damage
        • Checking Wheel Mounting
        • Tyre Pressure Of Cold Tires (Approx. 20 °C)
        • Information
        • Notes On Mounting Tires
      • WM 441202 Checking Disc Wheels (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Checking The Radial And Lateral Runout
      • WM 442655 Replacing Tyre Sealing Compound (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Information
        • Replacing Tyre Sealing Compound (Compressed Air Bottle)
      • WM 443219 Removing And Installing Wheel Electronics (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO)
        • General Information On Wheel Electronics
        • Removing And Installing Wheel Electronics
          • Removing Wheel Electronics
        • Installing Wheel Electronics
      • WM 443419 Removing And Installing Control Unit For Tyre Pressure Monitoring (TPM) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Tyre Pressure Monitoring System (RDK) Control Module
        • Removing Control Unit For Tyre Pressure Monitoring (TPM)
          • Removing Tyre Pressure Monitoring System (Rdk) Control Module
        • Installing Control Unit For Tyre Pressure Monitoring (TPM)
        • Subsequent Work
          • Rework On Tyre Pressure Monitoring System (RDK) Control Module
        • Programming Control Unit For Tyre Pressure Monitoring (TPM)
          • Control Units - Reading And Writing Replacement Values
      • WM 443619 Removing And Installing TPM Transmitter (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Information
        • Removing TPM Transmitter
        • Removing Rear TPM Transmitter
        • Installing TPM Transmitter
          • Installing Front TPM Transmitter
          • Installing Rear TPM Transmitter
        • Subsequent Work
      • WM 443819 Removing And Installing Antenna For Tyre Pressure Monitoring (TPM) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Antenna For Tyre Pressure Monitoring (TPM)
          • Removing Antenna Of Front Tyre Pressure Monitoring System
          • Removing Antenna Of Rear Tyre Pressure Monitoring System
        • Installing Antenna For Tyre Pressure Monitoring (TPM)
          • Installing Antenna For Tyre Pressure Monitoring (TPM) At Front
          • Installing Antenna For Tyre Pressure Monitoring (TPM) At Rear
        • Subsequent Work
      • WM 443819 Removing And Installing TPM Antenna (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Information
        • Removing TPM Antenna
        • Installing TPM Antenna
        • Subsequent Work
      • WM 444019 Mounting Tires (Removing And Installing Tires) - For Vehicles With And Without TPM
        • Tools
          • Tyre Removal/Mounting Machine
          • Auxiliary Equipment
          • Requirements/Information On Removing/Mounting Tires
          • Special Notes For Tire Pressure Monitoring (TPM)
        • Removing/Mounting Tires (Removing And Installing Tires)
          • Removing Tires
          • Mounting Tires
      • WM 4440IN Information On Tires/Mounting Tires (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tires
          • Tyre Damage - Caused While Driving
          • Tyre Damage - Caused While Removing/Mounting Tires
          • Replacing Tires
          • Navigation System
          • Wheel Storage
          • Tyre Identification (Speed Classes/Tyre Age)
      • WM 449503 Suspension Alignment, Complete (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
          • General Procedure For Wheel Alignment
          • Central Bolts: Different Procedure For Wheel Alignment
        • Aligning Vehicle At Front And Rear
          • Vehicle Height (Height Check)
            • General
            • Preliminary Work
            • Front Axle
            • Rear Axle
            • Wheel Alignment
          • Rear Axle
            • Preliminary Work
            • Adjusting Camber
            • Adjusting Toe
          • Front Axle
            • Adjusting Camber
            • Adjusting caster
            • Adjusting Toe
            • Toe-Difference Angle
      • WM 449503 Suspension Alignment, Complete (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • General Procedure For Wheel Alignment
        • Central Bolts: Different Procedure For Suspension Alignment
          • Notes
          • Information On Using The Central Wheel-Alignment Adapters WE 1371 On The 911 GT3
        • Preliminary Work
        • Aligning Vehicle At Front And Rear
          • Vehicle Height/Wheel Loads
          • Basic Information On Height Changes/Wheel-Load Changes
          • Front Axle
          • Rear Axle
        • Wheel Alignment
          • Rear-Axle Wheel Alignment
          • Adjusting Camber
          • Adjusting Toe
          • Adjusting Front Camber
          • Camber Fine Adjustment
          • Adjusting Caster
          • Toe-Difference Angle
    • 4X - Chassis - General -- CARRERA (997)
      • WM 4X00IN BRAKING PERFORMANCE TEST - DATA FOR COMPULSORY VEHICLE TESTING AS PER 29 StVZO (GERMAN ROAD TRAFFIC REGULATIONS) AS OF MODEL YEAR C (2012) (ALL MODELS)
        • Braking performance test - Data for compulsory vehicle testing as per 29 StVZO (German Road Traffic Regulations)
      • WM 4X00IN Central Bolts: Conversion To Conventional Wheel Mounting - 911 CARRERA GTS (CARR. GTS Coupe, CARR. GTS CABRIO, CARRERA 4 GTS, CARRERA 4 GTS CABRIO)
        • Information
          • Central bolts: Conversion to conventional wheel mounting
          • Conversion to conventional wheel mounting (instructions for one wheel)
      • WM 4X00IN Central Wheel Lock: Component Assessment(CARR. GTS Coupe, CARR. GTS CABRIO, Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Central wheel lock: Component assessment
          • Information on component assessment
          • Wheel hub assessment
          • Assessment of wheel adapters, wheel and brake disc
      • WM 4X00IN Plug-In Couplings For Hydraulic Lines - As Of Model Year 2009 (All Models)
        • Tools
        • Information
          • Information on steering and clutch lines
          • Plug-in coupling components - as of model year 2009
          • Plug-in couplings up to model year 2008
          • Plug-in couplings as of model year 2009
          • Opening and closing plug-in couplings - as of model year 2009
      • WM 4X00IN Specifications And Revision Intervals For Race Track Use - Vehicles With Central Lock(CARR. GTS Coupe, CARR. GTS CABRIO, Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Information
          • Notes
          • General specifications for race track use
          • Revision intervals for race track use
      • WM 4X00IN Symptom: Brake Noise (Squealing) (All Models)
        • Information
          • Symptom: Brake noise (squealing)
          • Information on brake noise (squealing) and remedial action
        • Brake noise (squealing) - grey cast-iron brake discs
          • Notes
          • 911 C2/C4 (3.6 l) standard brakes (grey cast iron) - as of 2009 model
          • 911 Turbo (997): Standard brake (grey cast iron) - 2007 to 2009 model
          • 911 GT3 (997): Standard brake (grey cast iron) - 2007 model
          • General information about GT3 grey cast-iron brakes in composite cast design from 2010 model onwards (generation II)
      • WM 4X00IN Technical values (ALL MODELS)
        • Technical values
        • Group 44 - Wheels, tyres, suspension alignment
      • WM 4X00IN Plug-In Couplings For Hydraulic Lines - (Gt2 RS)
        • Information on steering and clutch lines
      • WM 4X00IN Lifting The Vehicle (All Models)
        • Preliminary work
          • Lifting the vehicle
      • WM 4X00IN Tests/Notes For Four-Wheel Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Information for four-wheel drive vehicles
          • Balancing wheels on vehicle
          • Controlled four-wheel drive (PTM) on the 911 Turbo
          • Power measurements/function tests on the 911 Turbo
          • Power measurements on the 911 Carrera 4/911 Carrera 4S
          • Brake test
          • Handbrake test on the 911 Turbo
          • Towing
  • Wheel Alignment
    • 44 - Wheels, Tires, Suspension Alignment -- CARRERA (997)
      • WM 4400TW Adjustment Values For Suspension Alignment (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Vehicle Height
        • Wheel Alignment Values
      • WM 440519 Removing And Installing Wheel (Except CARR. GTS Coupe, CARR. GTS CABRIO, CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Information
          • Wheel Mounting
          • Wheels With Sensors For TPM
        • Removing Wheel
        • Installing Wheel
      • WM 440519 Removing And Installing Wheel With Central Bolt (All Models)
        • Tools
        • Information On Central Bolts
          • Information On Tools - Central Bolt System
          • Component Overview - Central Bolt System
        • Removing And Installing Wheel
          • Removing Wheel With Central Bolt
          • Installing Wheel With Central Bolt
      • WM 440594 Balancing/Optimizing Wheels (All Models)
        • Tools
        • Balancing/Optimizing Wheels
          • Overview
          • General
        • Explanation Of Terms
          • Geometry Error (Radial And Lateral Runout)
          • Flat Spots
          • Radial Force Variations
          • 1st Harmonic
          • Uncontrolled Matching
          • Controlled Matching
          • Tyre Seating Pressure
        • Further To 1: Fitting The Tyre On The Rim
        • Further To 2A: Measuring Radial Force Variations
        • Further To 2B: Stationary Balancing With Optimization Of Rolling Smoothness
        • Further to 3: Fitting The Wheel On The Vehicle
        • Balancing Weights
        • Attach Both Weights To The Inner Side
      • WM 4405IN Wheels And Tires/Tyre Pressure (All Models)
        • Technical values
        • Wheels, tires: Visual Inspection For Damage
        • Checking Wheel Mounting
        • Tyre Pressure Of Cold Tires (Approx. 20 °C)
        • Information
        • Notes On Mounting Tires
      • WM 441202 Checking Disc Wheels (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Checking The Radial And Lateral Runout
      • WM 442655 Replacing Tyre Sealing Compound (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Information
        • Replacing Tyre Sealing Compound (Compressed Air Bottle)
      • WM 443219 Removing And Installing Wheel Electronics (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO)
        • General Information On Wheel Electronics
        • Removing And Installing Wheel Electronics
          • Removing Wheel Electronics
        • Installing Wheel Electronics
      • WM 443419 Removing And Installing Control Unit For Tyre Pressure Monitoring (TPM) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Tyre Pressure Monitoring System (RDK) Control Module
        • Removing Control Unit For Tyre Pressure Monitoring (TPM)
          • Removing Tyre Pressure Monitoring System (Rdk) Control Module
        • Installing Control Unit For Tyre Pressure Monitoring (TPM)
        • Subsequent Work
          • Rework On Tyre Pressure Monitoring System (RDK) Control Module
        • Programming Control Unit For Tyre Pressure Monitoring (TPM)
          • Control Units - Reading And Writing Replacement Values
      • WM 443619 Removing And Installing TPM Transmitter (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Information
        • Removing TPM Transmitter
        • Removing Rear TPM Transmitter
        • Installing TPM Transmitter
          • Installing Front TPM Transmitter
          • Installing Rear TPM Transmitter
        • Subsequent Work
      • WM 443819 Removing And Installing Antenna For Tyre Pressure Monitoring (TPM) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Antenna For Tyre Pressure Monitoring (TPM)
          • Removing Antenna Of Front Tyre Pressure Monitoring System
          • Removing Antenna Of Rear Tyre Pressure Monitoring System
        • Installing Antenna For Tyre Pressure Monitoring (TPM)
          • Installing Antenna For Tyre Pressure Monitoring (TPM) At Front
          • Installing Antenna For Tyre Pressure Monitoring (TPM) At Rear
        • Subsequent Work
      • WM 443819 Removing And Installing TPM Antenna (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Information
        • Removing TPM Antenna
        • Installing TPM Antenna
        • Subsequent Work
      • WM 444019 Mounting Tires (Removing And Installing Tires) - For Vehicles With And Without TPM
        • Tools
          • Tyre Removal/Mounting Machine
          • Auxiliary Equipment
          • Requirements/Information On Removing/Mounting Tires
          • Special Notes For Tire Pressure Monitoring (TPM)
        • Removing/Mounting Tires (Removing And Installing Tires)
          • Removing Tires
          • Mounting Tires
      • WM 4440IN Information On Tires/Mounting Tires (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tires
          • Tyre Damage - Caused While Driving
          • Tyre Damage - Caused While Removing/Mounting Tires
          • Replacing Tires
          • Navigation System
          • Wheel Storage
          • Tyre Identification (Speed Classes/Tyre Age)
      • WM 449503 Suspension Alignment, Complete (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
          • General Procedure For Wheel Alignment
          • Central Bolts: Different Procedure For Wheel Alignment
        • Aligning Vehicle At Front And Rear
          • Vehicle Height (Height Check)
            • General
            • Preliminary Work
            • Front Axle
            • Rear Axle
            • Wheel Alignment
          • Rear Axle
            • Preliminary Work
            • Adjusting Camber
            • Adjusting Toe
          • Front Axle
            • Adjusting Camber
            • Adjusting caster
            • Adjusting Toe
            • Toe-Difference Angle
      • WM 449503 Suspension Alignment, Complete (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • General Procedure For Wheel Alignment
        • Central Bolts: Different Procedure For Suspension Alignment
          • Notes
          • Information On Using The Central Wheel-Alignment Adapters WE 1371 On The 911 GT3
        • Preliminary Work
        • Aligning Vehicle At Front And Rear
          • Vehicle Height/Wheel Loads
          • Basic Information On Height Changes/Wheel-Load Changes
          • Front Axle
          • Rear Axle
        • Wheel Alignment
          • Rear-Axle Wheel Alignment
          • Adjusting Camber
          • Adjusting Toe
          • Adjusting Front Camber
          • Camber Fine Adjustment
          • Adjusting Caster
          • Toe-Difference Angle
  • Wheels & Tire System
    • 44 - Wheels, Tires, Suspension Alignment -- CARRERA (997)
      • WM 4400TW Adjustment Values For Suspension Alignment (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO)
        • Tools
        • Technical Values
        • Vehicle Height
        • Wheel Alignment Values
      • WM 440519 Removing And Installing Wheel (Except CARR. GTS Coupe, CARR. GTS CABRIO, CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Technical Values
        • Information
          • Wheel Mounting
          • Wheels With Sensors For TPM
        • Removing Wheel
        • Installing Wheel
      • WM 440519 Removing And Installing Wheel With Central Bolt (All Models)
        • Tools
        • Information On Central Bolts
          • Information On Tools - Central Bolt System
          • Component Overview - Central Bolt System
        • Removing And Installing Wheel
          • Removing Wheel With Central Bolt
          • Installing Wheel With Central Bolt
      • WM 440594 Balancing/Optimizing Wheels (All Models)
        • Tools
        • Balancing/Optimizing Wheels
          • Overview
          • General
        • Explanation Of Terms
          • Geometry Error (Radial And Lateral Runout)
          • Flat Spots
          • Radial Force Variations
          • 1st Harmonic
          • Uncontrolled Matching
          • Controlled Matching
          • Tyre Seating Pressure
        • Further To 1: Fitting The Tyre On The Rim
        • Further To 2A: Measuring Radial Force Variations
        • Further To 2B: Stationary Balancing With Optimization Of Rolling Smoothness
        • Further to 3: Fitting The Wheel On The Vehicle
        • Balancing Weights
        • Attach Both Weights To The Inner Side
      • WM 4405IN Wheels And Tires/Tyre Pressure (All Models)
        • Technical values
        • Wheels, tires: Visual Inspection For Damage
        • Checking Wheel Mounting
        • Tyre Pressure Of Cold Tires (Approx. 20 °C)
        • Information
        • Notes On Mounting Tires
      • WM 441202 Checking Disc Wheels (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Checking The Radial And Lateral Runout
      • WM 442655 Replacing Tyre Sealing Compound (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Information
        • Replacing Tyre Sealing Compound (Compressed Air Bottle)
      • WM 443219 Removing And Installing Wheel Electronics (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO)
        • General Information On Wheel Electronics
        • Removing And Installing Wheel Electronics
          • Removing Wheel Electronics
        • Installing Wheel Electronics
      • WM 443419 Removing And Installing Control Unit For Tyre Pressure Monitoring (TPM) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Tyre Pressure Monitoring System (RDK) Control Module
        • Removing Control Unit For Tyre Pressure Monitoring (TPM)
          • Removing Tyre Pressure Monitoring System (Rdk) Control Module
        • Installing Control Unit For Tyre Pressure Monitoring (TPM)
        • Subsequent Work
          • Rework On Tyre Pressure Monitoring System (RDK) Control Module
        • Programming Control Unit For Tyre Pressure Monitoring (TPM)
          • Control Units - Reading And Writing Replacement Values
      • WM 443619 Removing And Installing TPM Transmitter (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Technical Values
        • Preliminary Work
        • Information
        • Removing TPM Transmitter
        • Removing Rear TPM Transmitter
        • Installing TPM Transmitter
          • Installing Front TPM Transmitter
          • Installing Rear TPM Transmitter
        • Subsequent Work
      • WM 443819 Removing And Installing Antenna For Tyre Pressure Monitoring (TPM) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Antenna For Tyre Pressure Monitoring (TPM)
          • Removing Antenna Of Front Tyre Pressure Monitoring System
          • Removing Antenna Of Rear Tyre Pressure Monitoring System
        • Installing Antenna For Tyre Pressure Monitoring (TPM)
          • Installing Antenna For Tyre Pressure Monitoring (TPM) At Front
          • Installing Antenna For Tyre Pressure Monitoring (TPM) At Rear
        • Subsequent Work
      • WM 443819 Removing And Installing TPM Antenna (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Preliminary Work
        • Information
        • Removing TPM Antenna
        • Installing TPM Antenna
        • Subsequent Work
      • WM 444019 Mounting Tires (Removing And Installing Tires) - For Vehicles With And Without TPM
        • Tools
          • Tyre Removal/Mounting Machine
          • Auxiliary Equipment
          • Requirements/Information On Removing/Mounting Tires
          • Special Notes For Tire Pressure Monitoring (TPM)
        • Removing/Mounting Tires (Removing And Installing Tires)
          • Removing Tires
          • Mounting Tires
      • WM 4440IN Information On Tires/Mounting Tires (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
        • Tires
          • Tyre Damage - Caused While Driving
          • Tyre Damage - Caused While Removing/Mounting Tires
          • Replacing Tires
          • Navigation System
          • Wheel Storage
          • Tyre Identification (Speed Classes/Tyre Age)
      • WM 449503 Suspension Alignment, Complete (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
          • General Procedure For Wheel Alignment
          • Central Bolts: Different Procedure For Wheel Alignment
        • Aligning Vehicle At Front And Rear
          • Vehicle Height (Height Check)
            • General
            • Preliminary Work
            • Front Axle
            • Rear Axle
            • Wheel Alignment
          • Rear Axle
            • Preliminary Work
            • Adjusting Camber
            • Adjusting Toe
          • Front Axle
            • Adjusting Camber
            • Adjusting caster
            • Adjusting Toe
            • Toe-Difference Angle
      • WM 449503 Suspension Alignment, Complete (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
        • Tools
        • Information
        • General Procedure For Wheel Alignment
        • Central Bolts: Different Procedure For Suspension Alignment
          • Notes
          • Information On Using The Central Wheel-Alignment Adapters WE 1371 On The 911 GT3
        • Preliminary Work
        • Aligning Vehicle At Front And Rear
          • Vehicle Height/Wheel Loads
          • Basic Information On Height Changes/Wheel-Load Changes
          • Front Axle
          • Rear Axle
        • Wheel Alignment
          • Rear-Axle Wheel Alignment
          • Adjusting Camber
          • Adjusting Toe
          • Adjusting Front Camber
          • Camber Fine Adjustment
          • Adjusting Caster
          • Toe-Difference Angle
• Transmission
  • Automatic Trans
    • 3X - Power Transmission - General -- CARRERA (997)
      • WM 3X00IN Technical Data - PORSCHE DOPPELKUPPLUNG (PDK)(CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO,"Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Speedster)
        • Technical values
          • Overview
          • Technical data
          • Transmission ratios
          • Technical values
      • WM 3X00IN TECHNICAL DATA, TRANSMISSION(All MODELS)
        • Technical values
          • Overview
          • Technical data
          • Transmission ratios
          • Filling capacities
      • WM 3X00IN Technical Data, Automatic Transmission(CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO)
        • Technical values
          • Overview
          • Technical data
          • Transmission ratios
          • Filling capacities
      • WM 3X00IN Technical Data On Front Final Drive(CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO
        • Technical values
          • Overview
          • Notes
          • Transmission ratio
          • Filling capacities
  • 30 - Clutch, Control -- CARRERA (997)
    • WM 300101 Checking Clutch Booster Circuit - As Of Model Year 2010 (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
      • Tools
      • Information
        • Notes
        • Check Clutch Booster Circuit Sequence
      • Checking Clutch Booster Circuit
        • 1. Clutch: Checking Fluid Levels
        • 2. Checking Pressure Accumulator And Pressure Control Valve
        • 3. Checking Pressure Retaining Valve In Clutch Slave Cylinder
        • 4. Checking Pressure Retaining Valve In Pressure Control Valve
    • WM 300101 Checking Clutch Booster Circuit (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
      • Tools
      • Information
      • Check Clutch Booster Circuit Sequence
        • Notes
        • 1. Clutch: Checking Fluid Levels
        • 2. Checking Pressure Accumulator And Pressure Control Valve (In Upper Part Of Reservoir)
        • 3. Checking Pressure Retaining Valve In Clutch Slave Cylinder
        • 4. Checking Pressure Retaining Valve In Upper Part Of Reservoir
    • WM 300101 Clutch: Checking Fluid Levels (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
      • Information
      • Checking Pentosin Hydraulic Fluid In Engine Compartment And Luggage Compartment Area
      • Checking Pentosin Hydraulic Fluid In Engine Compartment
        • Checking Pentosin Hydraulic Fluid In Engine Compartment - As Of MY 2010
      • Checking Pentosin Hydraulic Fluid In Luggage Compartment Area
    • WM 300107 Bleeding Clutch Control System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
      • Information
      • Bleeding Clutch Control System
        • Bleeding Clutch - By Pumping The Pedal
        • Bleeding The Clutch - With Bleeding Device
    • WM 300107 Bleeding The Clutch System - As Of Model Year 2009 (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
      • Notes
      • Information
        • Information On Clutch Hydraulic System - As Of Model Year 2009
        • Important Notes On Bleeding
      • Filling/Bleeding The Clutch System
        • Filling/Bleeding
    • WM 300107 Bleeding The Clutch System (Gt3, Gt3 RS, Gt2 RS)
      • Information
        • Important Notes On Bleeding
      • Bleeding
        • Filling/Bleeding
    • WM 300501 Checking Clutch Pedal (End Position) (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
      • Clutch Pedal: Checking Play And Pedal End Position
        • Checking Clutch Free Play
        • Clutch: Checking Pedal End Position (Pedal Return/Return Force)
    • WM 300519 Removing And Installing The Clutch Pedal (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0)
      • Technical Values
      • Preliminary Work
      • General Warning Notes
      • Removing
      • Installing
      • Subsequent Work
    • WM 302019 Removing And Installing Clutch Master Cylinder (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
      • Information
      • Preliminary Work
      • Removing Clutch Master Cylinder
      • Installing Clutch Master Cylinder
      • Subsequent Work
    • WM 303019 Removing And Installing Clutch Slave Cylinder (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
      • Tools
      • Technical values
      • Information
      • Preliminary Work
      • Removing Clutch Slave Cylinder
      • Installing Clutch Slave Cylinder
      • Subsequent Work
    • WM 303119 Removing And Installing Pressure Accumulator (Turbo Coupe, Turbo CABRIO)
      • Technical Values
      • Information
      • Removing Pressure Accumulator
      • Installing Pressure Accumulator
    • WM 304519 Removing And Installing Release Bearing (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS)
      • Preliminary Work
      • Removing Release Bearing
      • Installing Release Bearing
      • Subsequent Work
    • WM 304719 Removing And Installing Guide Sleeve (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS)
      • Technical Values
      • Information
      • Preliminary Work
      • Removing Guide Sleeve
      • Installing Guide Sleeve
      • Subsequent Work
    • WM 305019 Removing And Installing Clutch (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS)
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Clutch
      • Installing Clutch
      • Subsequent Work
    • WM 305601 Checking Clutch Plate For Wear (Except Turbo Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
      • Preliminary Work
      • Checking Clutch Plate For Wear
        • Notes
        • Checking Clutch Plate For Wear
      • Subsequent Work
    • WM 305601 Checking Clutch Plate For Wear (Except "Sport Classic", CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0)
      • Preliminary Work
      • Checking Clutch Plate For Wear
      • Subsequent Work
  • Manual Trans
    • 34 - Mechanical Gear-Shift System - Actuation, Housing -- CARRERA (997)
      • WM 340135 Checking And Topping Up Transmission Oil (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS, Gt3 & Gt3 RS
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Checking And Topping Up Transmission Oil
        • Subsequent Work
      • WM 340155 Changing Transmission Oil (Turbo Coupe & Turbo CABRIO)
        • Tools
        • Technical Values
          • Overview
          • Filling capacities
        • Information
        • Preliminary Work
        • Draining Transmission Oil
        • Filling Transmission Oil
        • Subsequent Work
      • WM 340419 Removing And Installing Shift Lever Knob (All Models)
        • Removing Shift Lever Knob
        • Installing Shift Lever Knob
      • WM 340819 Removing And Installing Gearshift Bracket (Except Turbo)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Gearshift Bracket
        • Installing Gearshift Bracket
        • Subsequent Work
      • WM 340819 Removing And Installing Shift Console (Except Turbo)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Shift Console
          • Removing Gearshift Bracket
        • Installing Shift Console
          • Installing Gearshift Bracket
        • Subsequent Work
      • WM 341219 Removing And Installing Shift And Selector Cables (Except Turbo)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Shift And Selector Cables
          • Detaching Shift And Selector Cables At Transmission
          • Detaching Shift And Selector Cables Inside Vehicle
        • Installing Shift And Selector Cables
          • Securing Shift And Selector Cables On The Transmission
          • Securing Shift And Selector Cables Inside The Vehicle
        • Subsequent Work
      • WM 343519 Removing And Installing Transmission (Except Turbo)
        • Tools
        • Technical Values
        • Preliminary Work
          • Notes
          • Preliminary Work
        • Removing Transmission
          • Dismantling
          • Removing Transmission
        • Installing Transmission
        • Assembly Work
        • Subsequent Work
      • WM 343527 Removing And Mounting Transmission (Gt2 RS, Gt3, Gt3 RS & Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Transmission
        • Mounting Transmission
          • Refitting Transmission
        • Subsequent Work
      • WM 343527 Removing And Mounting Transmission (All Models)
        • Technical Values
        • Preliminary Work
        • Removing Transmission
        • Mounting Transmission
      • WM 343537 Disassembling And Assembling Transmission (Gt2, Gt2 RS, Gt3, Gt3 RS & Gt3 RS 4.0)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Front Transmission Cover
        • Disassembling Front Gear Wheel Set For 5th-6th Gear
        • Disassembling Middle Gear Wheel Set For 1st-4th Gear
        • Adjusting Radial Play For Loose Gear Wheel For 2nd Gear (GT 2)
          • Measurement setup
          • Adjusting Radial Play For Loose Gear Wheel For 2nd Gear
        • Assembling Gear Wheel Set For 1st-4th Gear
        • Assembling Gear Wheel Set For 5th-6th Gear
        • Installing Front Transmission Cover
        • Subsequent Work
      • WM 343537 Disassembling And Assembling Transmission (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Front Transmission Cover
        • Disassembling Front Gear Wheel Set For 5th-6th Gear
        • Disassembling Middle Gear Wheel Set For 1st-4th Gear
        • Adjusting Radial Play For Loose Gear Wheel For 2nd Gear
          • Measurement Setup
          • Adjusting Radial Play For Loose Gear Wheel For 2nd Gear
        • Assembling Gear Wheel Set For 1st-4th Gear
        • Assembling Gear Wheel Set For 5th-6th Gear
        • Installing Front Transmission Cover
        • Subsequent Work
      • WM 3435TW Technical Data, Transmission (All Models)
        • Technical Values
          • Overview
          • Technical Data
          • Transmission Ratios
          • Filling Capacities
      • WM 344919 Removing And Installing Lid For Selector Force Mechanism (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Lid For Selector Force Mechanism
        • Installing Lid For Selector Force Mechanism
        • Subsequent Work
      • WM 345237 Disassembling And Assembling Gear Housing (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Disassembling Gear Housing
        • Assembling Gear Housing
        • Subsequent Work
      • WM 345537 Disassembling And Assembling Front Transmission Cover (Gt2, Gt2 RS, Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Front Transmission Cover
        • Disassembling Front Transmission Case Cover
        • Assembling Front Transmission Case Cover
        • Installing Front Transmission Cover
        • Subsequent Work
      • WM 347219 Removing And Installing Transmission Oil Pump (Gt2, Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removing Transmission Oil Pump
        • Installing Transmission Oil Pump
        • Subsequent Work
      • WM 347219 Removing And Installing Transmission-Oil Pump (Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removing Transmission-Oil Pump
        • Installing Transmission-Oil Pump
        • Subsequent Work
      • WM 347419 Removing And Installing Transmission Oil Cooler (Gt2, Gt2 RS, Gt3 & Gt3 RS
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Transmission Oil Cooler
        • Installing Transmission Oil Cooler
        • Subsequent Work
      • WM 347419 Removing And Installing Transmission Oil Cooler (Gt3 & Gt3 RS)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing Transmission Oil Cooler
        • Installing Transmission Oil Cooler
        • Subsequent Work
      • WM 347519 Removing And Installing Bracket For Oil Cooler (Gt3 & Gt3 RS)
        • Technical Values
        • Preliminary Work
        • Removing Bracket For Oil Cooler
        • Installing Bracket For Oil Cooler
        • Subsequent Work
    • 35 - Mechanical Gear-Shift System - Gears & Shafts -- CARRERA (997)
      • WM 355019 Removing And Installing Sealing Ring For Drive Shaft (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Tools
        • Technical values
        • Preliminary work
        • Removing sealing ring for drive shaft
        • Installing sealing ring for drive shaft
        • Subsequent work
      • WM 355019 Removing And Installing Sealing Ring For Drive Shaft(Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS)
        • Tools
        • Technical values
        • Preliminary work
        • Removing sealing ring for drive shaft
        • Installing sealing ring for drive shaft
        • Subsequent work
• External Pages