LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2012 >> Cayenne Base, Automatic Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> 69 Occupant Protection/Personal Protection -- 92A Cayenne >> WM 691119 Removing And Installing Front Three-Point Belt >> Subsequent Work
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Subsequent Work

  1. Install B-pillar trim panel. → INSTALLING B-PILLAR TRIM PANEL - section on "Installing"
  2. Connect the battery. → CONNECTING THE BATTERY
  3. Carry out a function test.
    • The belt strap must be fully rolled up when the function test is started.
    • Move the seat-belt height adjustment to the highest position.
    • Pull out the belt strap completely as far as it will go.
    • Roll up the belt strap again slowly. An audible buzzing noise can be heard when you do this.
    • If the roll-up process is interrupted, the belt strap cannot be pulled out again (permanent belt blockage).
    • The permanent belt blockage function must switch off at least 100 mm before the belt strap is rolled up fully, thereby ensuring that the belt strap can be pulled out again.
scientia non olet · About LEMON Manuals