LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2012 >> Cayenne Base, Automatic Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> 69 Occupant Protection/Personal Protection -- 92A Cayenne >> WM 696819 Removing And Installing Occupant Detection Control Unit >> Subsequent Work >> Subsequent Work For Occupant Detection Control Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Subsequent Work For Occupant Detection Control Unit

  1. Install pressure sensor mat. → SECURING COVER FOR FRONT SEAT - section on "Installing"
  2. Install padding for right seat. → SECURING COVER FOR FRONT SEAT - section on "Installing"
  3. Install control unit for memory seat adjustment. → INSTALLING CONTROL UNIT FOR MEMORY SEAT ADJUSTMENT - section on "Installing"
  4. Install right front seat. → INSTALLING FRONT SEAT - section on "Installing"
  5. Connect the battery and carry out work instructions after disconnecting the battery. → 978509 LOOSENING AND SECURING GROUND STRAP FOR BATTERY
  6. If the occupant detection control unit was replaced, the data must be written into the control unit/checked. → 696855 REPLACING OCCUPANT DETECTION CONTROL UNIT 
scientia non olet · About LEMON Manuals