Removal & Installation

Includes: R&I Engine Assembly (where necessary).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
	DOES NOT include wheel alignment.	7.5		C
Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace:
		0.8		C
Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace:
		0.2		C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear		1.3		B
Combination Procedure: FLYWHEEL: Remove & Replace:
		1.0		C
Combination Procedure: MAINSHAFT OIL SEAL: Remove & Replace:
		0.5		B
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
		0.8		C