ATEQ TPMS Reset Procedure

NOTE: The TPMS3 cannot be used to register the TPMS sensors, or reset the TPMS.

NOTE: This procedure is used when the tire size is not changed.

Tire Pressure Monitoring begins to "learn" the tires after a wheel change, wheel transmitter replacement or update of the tire settings. During this process, Tire Pressure Monitoring recognizes the wheels and their locations.

The message "No monitoring, System is learning" appears on the multi-function display.

NOTE: The wheel learning process only takes place when the vehicle is being driven at a vehicle speed above 16 mph (25 km/h).

Tire Pressure Monitoring requires a certain amount of time to learn the wheels. During this time, the current tire pressures are not available on the multi-function display:

The tire pressure warning light remains lit until all wheels have been learned.
The required pressures for cold tires (68 °F/ 20 °C) are indicated under "Fill info" in the "Tire pressure" main menu.

Position and pressure information is displayed as soon as Tire Pressure Monitoring has assigned the wheels recognized as belonging to the vehicle to the correct wheel positions.

Check the tire pressure for all wheels under "Fill info".
Correct the tire pressure to the required pressure if necessary.