Removal & Installation

Includes: R&I Engine Assembly (where necessary).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Standard Trans		6.7		C
Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace:
Standard Trans		0.8		C
Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace:
Standard Trans		0.2		C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear,w/Clutch Removed		0.5		B
Combination Procedure: FLYWHEEL: Remove & Replace:
Standard Trans, w/Clutch Removed		0.3		C
Combination Procedure: MAINSHAFT OIL SEAL: Remove & Replace:
Standard Trans		0.5		B
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
Standard Trans		0.5		C