Repair and Diagnosis (Single Page)

You are viewing the full "tree" of links on one page. This can load slowly, but is easier to search. The same page can appear multiple times under a different folder, that is why the page is so large.
View "split tree" where inner folders are split out. where inner links are on separate pages.

Expand All (for easy ctrl-f) Collapse All

• Quick Lookups
  • Electrical Component Locations
    • COMPONENT LOCATIONS - 718 BOXSTER,718 CAYMAN (1 Of 2)
      • 10 Engine - Crankcase, Suspension 2.0L - 982 - BOXSTER/CAYMAN
      • 10 Engine - Crankcase, Suspension 2.5L - 982 - BOXSTER/CAYMAN
      • 19 Engine - Cooling 2.0L - 982 - BOXSTER/CAYMAN
      • 19 Engine - Cooling 2.5L - 982 - BOXSTER/CAYMAN
      • 1X Engine - General 2.0L - 982 - BOXSTER/CAYMAN
      • 1X Engine - General 2.5L - 982 - BOXSTER/CAYMAN
      • 20 Fuel Supply, Actuator 2.0L - 982 - BOXSTER/CAYMAN
      • 20 Fuel Supply, Actuator 2.5L - 982 - BOXSTER/CAYMAN
      • 21 Exhaust Gas Turbocharging 2.0L - 982 - BOXSTER/CAYMAN
      • 21 Exhaust Gas Turbocharging 2.5L - 982 - BOXSTER/CAYMAN
      • 24 Fuel System - Electronic Injection 2.0L - 982 - BOXSTER/CAYMAN
      • 24 Fuel System - Electronic Injection 2.5L - 982 - BOXSTER/CAYMAN
      • 26 Exhaust System 2.0L - 982 - BOXSTER/CAYMAN
      • 26 Exhaust System 2.5L - 982 - BOXSTER/CAYMAN
      • 27 Starter, Power Supply, Cruise Control 2.0L - 982 - BOXSTER/CAYMAN
      • 27 Starter, Power Supply, Cruise Control 2.5L - 982 - BOXSTER/CAYMAN
      • 28 Ignition System, PREGLOW System 2.0L - 982 - BOXSTER/CAYMAN
      • 28 Ignition System, PREGLOW System 2.5L - 982 - BOXSTER/CAYMAN
      • 2X Petrol, Exhaust, Engine-Electric - General 2.0L - 982 - BOXSTER/CAYMAN
      • 2X Petrol, Exhaust, Engine-Electric - General 2.5L - 982 - BOXSTER/CAYMAN
      • 30 Clutch, Actuation 2.0L - 982 - BOXSTER/CAYMAN
      • 30 Clutch, Actuation 2.5L - 982 - BOXSTER/CAYMAN
      • 37 Automatic Transmission - Actuator, Housing 2.0L - 982 - BOXSTER/CAYMAN
      • 37 Automatic Transmission - Actuator, Housing 2.5L - 982 - BOXSTER/CAYMAN
      • 40 Wheel Suspension Front Drive Shaft 2.0L - 982 - BOXSTER/CAYMAN
      • 40 Wheel Suspension Front Drive Shaft 2.5L - 982 - BOXSTER/CAYMAN
      • 42 Rear Wheel Suspension Drive Shaft 2.0L - 982 - BOXSTER/CAYMAN
      • 42 Rear Wheel Suspension Drive Shaft 2.5L - 982 - BOXSTER/CAYMAN
      • 43 Leveling System, Air Suspension, Damper Control 2.0L - 982 - BOXSTER/CAYMAN
      • 43 Leveling System, Air Suspension, Damper Control 2.5L - 982 - BOXSTER/CAYMAN
      • 44 Wheels, Tyres, Suspension Alignment 2.0L - 982 - BOXSTER/CAYMAN
      • 44 Wheels, Tyres, Suspension Alignment 2.5L - 982 - BOXSTER/CAYMAN
      • 45 Control System 2.0L - 982 - BOXSTER/CAYMAN
      • 45 Control System 2.5L - 982 - BOXSTER/CAYMAN
      • 46 Brakes - Brake Mechanism 2.0L - 982 - BOXSTER/CAYMAN
      • 46 Brakes - Brake Mechanism 2.5L - 982 - BOXSTER/CAYMAN
      • 48 Steering 2.0L - 982 - BOXSTER/CAYMAN
      • 48 Steering 2.5L - 982 - BOXSTER/CAYMAN
      • 55 - Lids, Flaps - 982 - BOXSTER/CAYMAN
      • 57 Front Door Central Locking - 982 - BOXSTER/CAYMAN
      • 70 Linings, Insulation - 982 - BOXSTER/CAYMAN
      • 72 Seat Frames - 982 - BOXSTER/CAYMAN
      • 74 Seat Cushions, Seat Covers - 982 - BOXSTER/CAYMAN
    • COMPONENT LOCATIONS -- 718 BOXSTER,718 CAYMAN (2 Of 2)
      • 74 Seat Cushions, Seat Covers - 982 - BOXSTER/CAYMAN
      • 80 Heater - 982 - BOXSTER/CAYMAN
      • 85 Ventilation - 982 - BOXSTER/CAYMAN
      • 87 Air Conditioning - 982 - BOXSTER/CAYMAN
      • 90 Instruments - 982 - BOXSTER/CAYMAN
      • 91 Radio, On-Board Computer Park Assist - 982 - BOXSTER/CAYMAN
      • 92 Windscreen Wiper/Washer System - 982 - BOXSTER/CAYMAN
      • 94 Lights, Lamps, Switches, Exterior - 982 - BOXSTER/CAYMAN
      • 96 Lights, Lamps, Switches-Interior, Anti-Theft Protection - 982 - BOXSTER/CAYMAN
      • 97 Lines - 982 - BOXSTER/CAYMAN
  • Fluids
  • Technical Bulletins
    • Campaigns
    • Safety Recalls
    • Technical Service Bulletins
  • Tire Fitment
  • Wiring Diagrams
    • System Wiring Diagrams
      • Using lemon2025'S Wiring Diagrams
      • Active BODYWORKS
      • Air Conditioning
      • Anti-Lock Brakes
      • Anti-Theft
      • Body Control Modules
      • Computer Data Lines
      • Cooling Fan
      • Cruise Control
      • Defoggers
      • Electronic Power Steering
      • Electronic Suspension
      • Engine Performance
        • 2.0L Turbo
        • 2.5L Turbo
        • 4.0L
      • Exterior Lights
      • Ground Distribution
      • Headlights
      • Horn
      • Instrument Cluster
      • Interior Lights
      • Memory Systems
      • Navigation
      • Power Distribution
      • Power Door Locks
      • Power Mirrors
      • Power Seats
      • Power Top/Sunroof
      • Power Windows
      • Radio
      • Shift Interlock
      • Starting/Charging
      • Supplemental Restraints
      • Transmission
      • Trunk, Tailgate, Fuel Door
      • Warning Systems
      • Wiper/Washer
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
• Accessories & Equipment
  • Anti-Theft Systems
    • 57 Front Door Central Locking -- 982 - BOXSTER/CAYMAN
      • WM, 570837 Disassembling And Assembling Key
        • Disassembling And Assembling Key
      • WM, 570919 Removing And Installing Lock Cylinder
        • Preliminary Work
        • Removing Lock Cylinder
        • Installing Lock Cylinder
        • Subsequent Work
      • WM, 571119 Removing And Installing Outer Front Door Handle
        • Technical Values
        • Preliminary Work
        • Removing Outer Front Door Handle
        • Installing Outer Front Door Handle
        • Subsequent Work
      • WM, 571719 Removing And Installing Door Lock
        • Technical Values
        • Preliminary Work
        • Removing Door Lock
        • Installing Door Lock
        • Subsequent Work
      • WM, 572619 Removing And Installing Striker Pin
        • Tools
        • Technical Values
        • Removing Striker Pin
        • Installing Striker Pin
        • Adjusting Lock Peg (Striker Pin)
      • WM, 573019 Removing And Installing Door Sub-Frame
        • Technical Values
        • Preliminary Work
        • Removing Door Sub-Frame
          • Disconnecting Wire Harness For Door
        • Removing Front Door Sub-Frame
        • Installing Door Sub-Frame
        • Subsequent Work
      • WM, 573055 Replacing Door Sub-Frame
        • Preliminary Work
        • Subsequent Work
      • WM, 574519 Removing And Installing Door Opener
        • Technical Values
        • Preliminary Work
        • Removing Door Opener
        • Installing Door Opener
        • Subsequent Work
      • WM, 575115 Adjusting Front Door
        • Tools
        • Technical Values
        • Adjusting Front Door
      • WM, 575119 Removing And Installing Front Door
        • Technical Values
        • Preliminary Work
        • Removing Front Door
        • Installing Front Door
        • Subsequent Work
      • WM, 575137 Disassembling And Assembling Front Door
        • Parts
        • Technical Values
        • Disassembling Front Door
        • Assembling Front Door
      • WM, 575319 Removing And Installing Door Hinge
        • Technical Values
        • Preliminary Work
        • Removing Front Door Hinge
        • Installing Front Door Hinge
        • Subsequent Work
      • WM, 575355 Replacing Door Hinge (On Body Side)
        • Preliminary Work
        • Safety Instructions And Information On Quality
        • Removing Door Hinge (On Body Side)
        • Preparing Door Hinge (On Body Side) For Installation
        • Preparing Connection Areas Of The Body For Installing The Door Hinge (On Body Side)
        • Installing Door Hinge (On Body Side)
        • Subsequent Work
      • WM, 575919 Removing And Installing Door Arrester
        • Technical Values
        • Preliminary Work
        • Removing Door Arrester
          • Loosening Door Arrester On Body Side
        • Installing Door Arrester
          • Securing Door Arrester At The Door Side
          • Securing Door Arrester On Body Side
        • Subsequent Work
      • WM, 576319 Removing And Installing Rubber Seal For Front Door
        • Preliminary Work
        • Removing Rubber Seal For Front Door
        • Installing Rubber Seal For Front Door
        • Subsequent Work
      • WM, 576419 Removing And Installing B-Pillar Seal
        • Technical Values
        • Preliminary Work
        • Removing B-Pillar Seal
        • Installing B-Pillar Seal
        • Subsequent Work
      • WM, 576519 Removing And Installing Rubber Seal For Door (On Door Side)
        • Preliminary Work
        • Removing Outer Rubber Seal For Front Door
        • Installing Outer Rubber Seal For Front Door
        • Subsequent Work
      • WM, 577319 Removing And Installing Door Control Unit
        • Tools
        • Preliminary Work
        • Removing Door Control Unit
        • Installing Front Door Control Unit
        • Subsequent Work
      • WM, 578919 Removing And Installing Control Unit For Rear-End Electronics
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Control Unit For Rear-End Electronics
        • Subsequent Work
      • WM, 578955 Replacing Control Unit For Rear-End Electronics
        • Replacing Rear-End Electronics
    • 96 Lights, Lamps, Switches-Interior, Anti-Theft Protection -- 982 - BOXSTER/CAYMAN
      • WM, 961519 Removing And Installing FOOTWELL Light
        • Component Information
          • Installation Position Of Footwell Lights
          • Removing And Installing Footwell Light
      • WM, 962719 Removing And Installing Switch Console
        • Preliminary Work
        • Removing And Installing Switch Console
        • Subsequent Work
      • WM, 962755 Replacing Switch Console
        • Tools
        • Preliminary Work
        • Information
        • Enabling Sport/Sport Plus/Sport CHRONO Plus Function
        • Coding Keypad Assignment
        • Replacing Switch Console
      • WM, 963819 Removing And Installing Front Camera
        • Installation Position
        • Preliminary Work
        • Removing Front Camera
        • Installing Front Camera
        • Subsequent Work
      • WM, 963855 Replacing Front Camera
        • Tools
        • Information
          • When Does Front Camera Need To Be Calibrated?
        • Preliminary Work
        • Calibrating Front Camera
      • WM, 964019 Removing And Installing Rear Luggage Compartment Light
        • Installation Position
        • Removing And Installing Rear Luggage Compartment Light
          • Removing And Installing Rear Luggage Compartment Lamp
      • WM, 964019 Removing And Installing Luggage Compartment Light
        • Removing And Installing Luggage Compartment Light
      • WM, 966255 Replacing Remote Control (Hand-Held Transmitter)
        • Replacing Remote Control (Hand-Held Transmitter)
      • WM, 966319 Removing And Installing Inclination Sensor Control Unit
        • Information
      • WM, 966519 Removing And Installing Alarm Siren
        • Component Information
          • Installation Position Of Alarm Siren
        • Preliminary Work
        • Removing And Installing Alarm Siren
        • Subsequent Work
      • WM, 967819 Removing And Installing Control Unit For Garage Door Opener
        • Information
          • Spare Parts Information
        • Removing And Installing Control Unit For Garage Door Opener
      • WM, 967919 Removing And Installing Control Unit For Garage Door Opener
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Control Unit For Garage Door Opener
        • Subsequent Work
      • WM, 968519 Removing And Installing Interior Monitoring Sensor
        • Component Information
          • Installation Position Of Interior Surveillance Sensor
        • Preliminary Work
        • Removing And Installing Interior Monitoring Sensor
        • Subsequent Work
  • Communication Devices
    • 9940 PORSCHE Connect -- 982 - BOXSTER/CAYMAN
      • WM, 9940 - FSL_PORSCHE Connect_Google Street View
        • General Information And Initial Questions
      • WM, 9940 - FSL_PORSCHE Connect_Google Earth
        • General Information And Initial Questions
      • WM, 9940 - FSL_PORSCHE Connect_Radio.Net
        • General Information And Initial Questions
      • WM, 9940 - FSL_PORSCHE Connect_NAPSTER/Rhapsody
        • General Information And Initial Questions
      • WM, 9940 - FSL_PORSCHE Connect_Online Search
        • General Information And Initial Questions
      • WM, 9940 - FSL_PORSCHE Connect_Calendar
        • General Information And Initial Questions
      • WM, 9940 - FSL_PORSCHE Connect_Apple Car Play
        • General Information And Initial Questions
      • WM, 9940 - FSL PORSCHE Connect RTTI
        • General Information And Initial Questions
      • WM, 9940 - FSL PORSCHE Connect MYDESTINATIONS
        • General Information And Initial Questions
  • Cruise Control Systems
    • 27 Starter, Power Supply, Cruise Control 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 270419 - Removing And Installing Voltage Converter For Start/Stop
        • Component Information
          • Installation Position Of Voltage Converter For Start/Stop
        • Preliminary Work
        • Removing And Installing Voltage Converter For Start/Stop
        • Subsequent Work
      • WM, 270519 - Removing And Installing Battery Sensor
        • Technical Values
        • Preliminary Work
        • Removing And Installing Battery Sensor
        • Subsequent Work
      • WM, 270555 - Replacing Battery Sensor
        • Replacing Battery Sensor
      • WM, 270601 - Checking The Battery
        • Technical Values
        • Battery And Handling Instructions
          • Notes
          • Visual Inspection Of Battery
          • Open-Circuit Voltage Measurement
          • Battery Load Test
          • Charging The Battery
      • WM, 270619 - Removing And Reinstalling Battery
        • Technical Values
        • Preliminary Work
        • Removing Battery
        • Installing Battery
        • Subsequent Work
      • WM, 270655 - Replacing Battery
        • Preliminary Work
        • Replacing Battery
        • Subsequent Work
      • WM, 2706IN - External Power Connection, Jump-Lead Starting
        • Information
          • External Power Connection, Jump-Lead Starting
      • WM, 272219 - Removing And Installing Generator
        • Technical Values
        • Preliminary Work
        • Removing The Generator
        • Installing Generator
        • Subsequent Work
      • WM, 276019 - Removing And Installing Starter
        • Technical Values
        • Preliminary Work
        • Removing The Starter
        • Installing The Starter
        • Subsequent Work
      • WM, 278515 - Adjusting Distance Measuring Sensor Control Unit
        • Tools
        • Preliminary Work
          • Distance Measuring Sensor Control Unit Needs To Be Adjusted
          • Requirements For Testing And Adjustment
          • Setting Up The Measuring System
          • Preparation For Adjusting Distance Measuring Sensor
        • Adjusting Distance Measuring Sensor Control Unit
          • Adjusting Control Unit For Distance Measuring Sensor
        • Subsequent Work
      • WM, 278519 - Removing And Installing Distance Measuring Sensor Control Unit
        • Technical Values
        • Distance Measuring Sensor Control Unit
          • Removing Control Unit For Distance Measuring Sensor
        • Installing Distance Measuring Sensor Control Unit
          • Installing Control Unit For Distance Measuring Sensor
        • Subsequent Work
      • WM, 278555 - Replacing Distance Measuring Sensor Control Unit
        • Tools
        • Preliminary Work
        • Programming Distance Measuring Sensor Control Unit
          • Programming Control Unit For Distance Measuring Sensor
        • Automatically Coding Distance Measuring Sensor Control Unit
          • Coding Control Unit For Distance Measuring Sensor Automatically
  • Drivers Assistance Systems - ADAS
    • 91 Radio, On-Board Computer Park Assist -- 982 - BOXSTER/CAYMAN
      • WM, 911019 Removing And Installing Pcm Display And Operator Control Unit
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Pcm Display And Operator Control Unit
        • Installing Display And Operator Control Unit
        • Subsequent Work
      • WM, 911055 Replacing Pcm Display And Operator Control Unit
        • Replacing Pcm Display And Operator Control Unit
      • WM, 911319 Removing And Installing GPS Antenna
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing GPS Antenna
        • Subsequent Work
      • WM, 911719 Removing And Installing TV Tuner
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing TV Tuner
        • Subsequent Work
      • WM, 911755 Replacing TV Tuner
        • Replacing TV Tuner
      • WM, 912219 Removing And Installing Multimedia Interface
        • Component Information
          • Installation Position Of Multimedia Interface
          • Removing And Installing Multimedia Interface
      • WM, 912855 Replacing Antenna Lines (Antenna Amplifier To Pcm)
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Replacing Antenna Lines (Antenna Amplifier To Pcm)
        • Subsequent Work
      • WM, 912855 Replacing Antenna Line (GPS Antenna For Pcm)
        • Component Information
          • Installation Position
        • Preliminary Work
        • Replacing Antenna Line (GPS Antenna For Pcm)
        • Subsequent Work
      • WM, 912855 Replacing Antenna Lines (From Antenna Amplifier To TV Tuner)
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
          • Preliminary Work For Antenna Line From Antenna Amplifier On Driver's Side To TV Tuner
          • Preliminary Work For Antenna Line From Antenna Amplifier On Passenger's Side To TV Tuner
        • Replacing Antenna Line From Antenna Amplifier To TV Tuner
        • Subsequent Work
          • Subsequent Work For Antenna Lines From Antenna Amplifier On Driver's Side To TV Tuner
          • Subsequent Work For Antenna Lines From Antenna Amplifier On Passenger's Side To TV Tuner
      • WM, 913619 Removing And Installing Subwoofer
        • Component Information
          • Installation Position Of Subwoofer
        • Preliminary Work
        • Removing And Installing Subwoofer
        • Subsequent Work
      • WM, 913819 Removing And Installing SDARS Antenna
        • Technical Values
        • Component Information
          • Installation Position
        • Removing SDARS Antenna
        • Installing SDARS Antenna
      • WM, 913819 Removing And Installing SDARS Antenna (CAYMAN)
        • Technical Values
        • Preliminary Work
        • Removing SDARS Antenna (CAYMAN)
        • Installing SDARS Antenna (CAYMAN)
        • Subsequent Work
      • WM, 914019 Removing And Installing Front Central Loudspeaker
        • Component Information
          • Installation Position Of Front Loudspeakers
        • Preliminary Work
        • Removing And Installing Front Central Loudspeaker
        • Subsequent Work
      • WM, 914019 Removing And Installing Front Tweeter
        • Component Information
          • Installation Position Of Front Loudspeakers
        • Preliminary Work
        • Removing And Installing Front Tweeter
          • Removing And Installing Front Tweeter (Basic/High End)
          • Removing And Installing Front Tweeter (Premium)
        • Subsequent Work
      • WM, 914119 Front Door Speakers
        • Technical Values
        • Preliminary Work
        • Removing Front Loudspeakers
          • Removing Mid-Range Loudspeaker
        • Removing Woofer
        • Installing Front Loudspeakers
          • Installing Mid-Range Loudspeaker
        • Installing Woofer
        • Subsequent Work
      • WM, 914219 Removing And Installing Rear Loudspeaker
        • Component Information
          • Installation Position
        • Removing And Installing Rear Loudspeaker
      • WM, 914319 Removing And Installing Reversing Camera
        • Preliminary Work
        • Removing Reversing Camera
        • Installing Reversing Camera
        • Subsequent Work
      • WM, 914325 Calibrating Reversing Camera
        • Tools
        • Information
          • When Does Reversing Camera Need To Be Calibrated?
        • Preliminary Work
        • Calibrating Reversing Camera
        • Subsequent Work
      • WM, 914419 Removing And Installing Loudspeaker Booster
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Loudspeaker Booster
        • Subsequent Work
      • WM, 914455 Replacing Loudspeaker Amplifier
        • Replacing Loudspeaker Amplifier
      • WM, 914519 Removing And Installing Mobile Phone Antenna Amplifier
        • Preliminary Work
        • Removing Mobile Phone Antenna Amplifier
        • Installing Mobile Phone Antenna Amplifier
        • Subsequent Work
      • WM, 914719 Removing And Installing Mobile Communication Antenna In Front Apron
        • Component Information
          • Installation Position Of Mobile Communication Antenna In Front Apron
        • Preliminary Work
        • Removing And Installing Mobile Communication Antenna In Front Apron
        • Subsequent Work
      • WM, 914719 Removing And Installing Mobile Communication Antenna
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Mobile Communication Antenna
        • Subsequent Work
      • WM, 915219 Removing And Installing Central Computer
        • Technical Values
        • Preliminary Work
        • Removing And Installing Central Computer
          • Removing Central Computer
          • Installing Central Computer
        • Subsequent Work
      • WM, 915225 Programming Central Computer Data Update
        • Programming Central Computer Data Update
      • WM, 915225 Programming Navigation Update On Central Computer
        • Programming Navigation Update On Central Computer
      • WM, 915255 Replacing Central Computer
        • Tools
        • Replacing Central Computer
        • Subsequent Work
      • WM, 915719 Removing And Installing Microphone For Telephone
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Microphone For Telephone
        • Subsequent Work
      • WM, 916119 Removing And Installing Multi-Function Remote Control
        • Information
      • WM, 916219 Removing And Installing Control Unit For Steering Wheel Electronics
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Control Unit For Steering Wheel Electronics
        • Installing Control Unit For Steering Wheel Electronics
        • Subsequent Work
      • WM, 916255 Replacing Control Unit For Steering Wheel Electronics
        • Replacing Control Unit For Steering Wheel Electronics
      • WM, 916819 Removing And Installing Outside Temperature Sensor
        • Preliminary Work
        • Removing And Installing Outside Temperature Sensor
        • Subsequent Work
      • WM, 917019 Removing And Installing Control Unit For Lane Change Assist
        • Technical Values
        • Preliminary Work
        • Removing Control Unit For Lane Change Assist
          • Removing Lane Change Assist Control Unit
          • Installing Control Unit For Lane Change Assist
        • Subsequent Work
      • WM, 917025 Calibrating Control Unit For Lane Change Assist
        • Tools
        • Preliminary Work
        • Calibrating Control Unit For Lane Change Assist
      • WM, 917055 Replacing Control Unit For Lane Change Assist
        • Tools
        • Coding Control Unit For Lane Change Assist
        • Subsequent Work
      • WM, 917119 Removing And Installing Lane Change Assist Display
        • Removing Lane Change Assist Display
        • Installing Lane Change Assist Display
      • WM, 917419 Removing And Installing Control Unit For Park Assist
        • Component Information
          • Installation Position Of Control Unit For Parkassist
        • Preliminary Work
        • Removing And Installing Control Unit For PARKASSIST
        • Subsequent Work
      • WM, 917425 Calibrating Control Unit For Lane Change Assist
        • Tools
        • Information
        • Preliminary Work
        • Calibrating Control Unit For Lane Change Assist
          • Lane Change Assist Control Unit
      • WM, 917455 Replacing Control Unit For PARKASSIST
        • Replacing Control Unit For PARKASSIST
      • WM, 917519 Removing And Installing PARKASSIST Sensor
        • Preliminary Work
        • Removing PARKASSIST Sensor
        • Installing PARKASSIST Sensor
        • Subsequent Work
      • WM, 918419 Removing And Installing Antenna Amplifier
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Antenna Amplifier
        • Subsequent Work
      • WM, 918619 Removing And Installing Antenna Control Unit
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Antenna Control Unit
        • Subsequent Work
      • WM, 918819 Removing And Installing Telephone Console
        • Removing Telephone Console
        • Installing Telephone Console
      • WM, 919319 Removing And Installing USB/IPOD Control Unit
        • Component Information
          • Installation Position Of USB/iPod Control Unit
        • Preliminary Work
        • Removing And Installing USB/IPOD Control Unit
        • Subsequent Work
      • WM, 919601 Checking Era GLONASS Emergency Call System Battery
        • Tools
        • Checking Era GLONASS Emergency Call System Battery
      • WM, 919619 Removing And Installing Era GLONASS Emergency Call System
        • Technical Values
        • Removing Era GLONASS Emergency Call System
        • Installing Era GLONASS Emergency Call System
      • WM, 919625 Commissioning/Activating Era GLONASS Emergency Call System
        • Tools
        • Coding Emergency Call System
      • WM, 919655 Replacing Era GLONASS Emergency Call System Battery
        • Tools
        • Replacing Era GLONASS Emergency Call System Battery
  • Entertainment Systems
    • 91 Radio, On-Board Computer Park Assist -- 982 - BOXSTER/CAYMAN
      • WM, 911019 Removing And Installing Pcm Display And Operator Control Unit
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Pcm Display And Operator Control Unit
        • Installing Display And Operator Control Unit
        • Subsequent Work
      • WM, 911055 Replacing Pcm Display And Operator Control Unit
        • Replacing Pcm Display And Operator Control Unit
      • WM, 911319 Removing And Installing GPS Antenna
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing GPS Antenna
        • Subsequent Work
      • WM, 911719 Removing And Installing TV Tuner
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing TV Tuner
        • Subsequent Work
      • WM, 911755 Replacing TV Tuner
        • Replacing TV Tuner
      • WM, 912219 Removing And Installing Multimedia Interface
        • Component Information
          • Installation Position Of Multimedia Interface
          • Removing And Installing Multimedia Interface
      • WM, 912855 Replacing Antenna Lines (Antenna Amplifier To Pcm)
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Replacing Antenna Lines (Antenna Amplifier To Pcm)
        • Subsequent Work
      • WM, 912855 Replacing Antenna Line (GPS Antenna For Pcm)
        • Component Information
          • Installation Position
        • Preliminary Work
        • Replacing Antenna Line (GPS Antenna For Pcm)
        • Subsequent Work
      • WM, 912855 Replacing Antenna Lines (From Antenna Amplifier To TV Tuner)
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
          • Preliminary Work For Antenna Line From Antenna Amplifier On Driver's Side To TV Tuner
          • Preliminary Work For Antenna Line From Antenna Amplifier On Passenger's Side To TV Tuner
        • Replacing Antenna Line From Antenna Amplifier To TV Tuner
        • Subsequent Work
          • Subsequent Work For Antenna Lines From Antenna Amplifier On Driver's Side To TV Tuner
          • Subsequent Work For Antenna Lines From Antenna Amplifier On Passenger's Side To TV Tuner
      • WM, 913619 Removing And Installing Subwoofer
        • Component Information
          • Installation Position Of Subwoofer
        • Preliminary Work
        • Removing And Installing Subwoofer
        • Subsequent Work
      • WM, 913819 Removing And Installing SDARS Antenna
        • Technical Values
        • Component Information
          • Installation Position
        • Removing SDARS Antenna
        • Installing SDARS Antenna
      • WM, 913819 Removing And Installing SDARS Antenna (CAYMAN)
        • Technical Values
        • Preliminary Work
        • Removing SDARS Antenna (CAYMAN)
        • Installing SDARS Antenna (CAYMAN)
        • Subsequent Work
      • WM, 914019 Removing And Installing Front Central Loudspeaker
        • Component Information
          • Installation Position Of Front Loudspeakers
        • Preliminary Work
        • Removing And Installing Front Central Loudspeaker
        • Subsequent Work
      • WM, 914019 Removing And Installing Front Tweeter
        • Component Information
          • Installation Position Of Front Loudspeakers
        • Preliminary Work
        • Removing And Installing Front Tweeter
          • Removing And Installing Front Tweeter (Basic/High End)
          • Removing And Installing Front Tweeter (Premium)
        • Subsequent Work
      • WM, 914119 Front Door Speakers
        • Technical Values
        • Preliminary Work
        • Removing Front Loudspeakers
          • Removing Mid-Range Loudspeaker
        • Removing Woofer
        • Installing Front Loudspeakers
          • Installing Mid-Range Loudspeaker
        • Installing Woofer
        • Subsequent Work
      • WM, 914219 Removing And Installing Rear Loudspeaker
        • Component Information
          • Installation Position
        • Removing And Installing Rear Loudspeaker
      • WM, 914319 Removing And Installing Reversing Camera
        • Preliminary Work
        • Removing Reversing Camera
        • Installing Reversing Camera
        • Subsequent Work
      • WM, 914325 Calibrating Reversing Camera
        • Tools
        • Information
          • When Does Reversing Camera Need To Be Calibrated?
        • Preliminary Work
        • Calibrating Reversing Camera
        • Subsequent Work
      • WM, 914419 Removing And Installing Loudspeaker Booster
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Loudspeaker Booster
        • Subsequent Work
      • WM, 914455 Replacing Loudspeaker Amplifier
        • Replacing Loudspeaker Amplifier
      • WM, 914519 Removing And Installing Mobile Phone Antenna Amplifier
        • Preliminary Work
        • Removing Mobile Phone Antenna Amplifier
        • Installing Mobile Phone Antenna Amplifier
        • Subsequent Work
      • WM, 914719 Removing And Installing Mobile Communication Antenna In Front Apron
        • Component Information
          • Installation Position Of Mobile Communication Antenna In Front Apron
        • Preliminary Work
        • Removing And Installing Mobile Communication Antenna In Front Apron
        • Subsequent Work
      • WM, 914719 Removing And Installing Mobile Communication Antenna
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Mobile Communication Antenna
        • Subsequent Work
      • WM, 915219 Removing And Installing Central Computer
        • Technical Values
        • Preliminary Work
        • Removing And Installing Central Computer
          • Removing Central Computer
          • Installing Central Computer
        • Subsequent Work
      • WM, 915225 Programming Central Computer Data Update
        • Programming Central Computer Data Update
      • WM, 915225 Programming Navigation Update On Central Computer
        • Programming Navigation Update On Central Computer
      • WM, 915255 Replacing Central Computer
        • Tools
        • Replacing Central Computer
        • Subsequent Work
      • WM, 915719 Removing And Installing Microphone For Telephone
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Microphone For Telephone
        • Subsequent Work
      • WM, 916119 Removing And Installing Multi-Function Remote Control
        • Information
      • WM, 916219 Removing And Installing Control Unit For Steering Wheel Electronics
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Control Unit For Steering Wheel Electronics
        • Installing Control Unit For Steering Wheel Electronics
        • Subsequent Work
      • WM, 916255 Replacing Control Unit For Steering Wheel Electronics
        • Replacing Control Unit For Steering Wheel Electronics
      • WM, 916819 Removing And Installing Outside Temperature Sensor
        • Preliminary Work
        • Removing And Installing Outside Temperature Sensor
        • Subsequent Work
      • WM, 917019 Removing And Installing Control Unit For Lane Change Assist
        • Technical Values
        • Preliminary Work
        • Removing Control Unit For Lane Change Assist
          • Removing Lane Change Assist Control Unit
          • Installing Control Unit For Lane Change Assist
        • Subsequent Work
      • WM, 917025 Calibrating Control Unit For Lane Change Assist
        • Tools
        • Preliminary Work
        • Calibrating Control Unit For Lane Change Assist
      • WM, 917055 Replacing Control Unit For Lane Change Assist
        • Tools
        • Coding Control Unit For Lane Change Assist
        • Subsequent Work
      • WM, 917119 Removing And Installing Lane Change Assist Display
        • Removing Lane Change Assist Display
        • Installing Lane Change Assist Display
      • WM, 917419 Removing And Installing Control Unit For Park Assist
        • Component Information
          • Installation Position Of Control Unit For Parkassist
        • Preliminary Work
        • Removing And Installing Control Unit For PARKASSIST
        • Subsequent Work
      • WM, 917425 Calibrating Control Unit For Lane Change Assist
        • Tools
        • Information
        • Preliminary Work
        • Calibrating Control Unit For Lane Change Assist
          • Lane Change Assist Control Unit
      • WM, 917455 Replacing Control Unit For PARKASSIST
        • Replacing Control Unit For PARKASSIST
      • WM, 917519 Removing And Installing PARKASSIST Sensor
        • Preliminary Work
        • Removing PARKASSIST Sensor
        • Installing PARKASSIST Sensor
        • Subsequent Work
      • WM, 918419 Removing And Installing Antenna Amplifier
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Antenna Amplifier
        • Subsequent Work
      • WM, 918619 Removing And Installing Antenna Control Unit
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Antenna Control Unit
        • Subsequent Work
      • WM, 918819 Removing And Installing Telephone Console
        • Removing Telephone Console
        • Installing Telephone Console
      • WM, 919319 Removing And Installing USB/IPOD Control Unit
        • Component Information
          • Installation Position Of USB/iPod Control Unit
        • Preliminary Work
        • Removing And Installing USB/IPOD Control Unit
        • Subsequent Work
      • WM, 919601 Checking Era GLONASS Emergency Call System Battery
        • Tools
        • Checking Era GLONASS Emergency Call System Battery
      • WM, 919619 Removing And Installing Era GLONASS Emergency Call System
        • Technical Values
        • Removing Era GLONASS Emergency Call System
        • Installing Era GLONASS Emergency Call System
      • WM, 919625 Commissioning/Activating Era GLONASS Emergency Call System
        • Tools
        • Coding Emergency Call System
      • WM, 919655 Replacing Era GLONASS Emergency Call System Battery
        • Tools
        • Replacing Era GLONASS Emergency Call System Battery
  • Exterior Lights
    • 94 Lights, Lamps, Switches, Exterior -- 982 - BOXSTER/CAYMAN
      • WM, 940519 Removing And Installing Main Light Switch
        • Preliminary Work
        • Removing Main Light Switch
        • Installing Main Light Switch
        • Subsequent Work
      • WM, 941516 Adjusting Headlights
        • Technical Values
        • Adjusting Main Headlights
      • WM, 941519 Removing And Installing Main Headlights
        • Preliminary Work
        • Removing And Installing Main Headlights
        • Subsequent Work
      • WM, 941519 Removing And Installing Control Unit For Led Daytime Driving Lights
        • Preliminary Work
        • Removing Control Unit For Led Daytime Driving Lights
        • Installing Control Unit For Led Daytime Driving Lights
        • Subsequent Work
      • WM, 941555 Replacing Headlights
        • Preliminary Work
        • Disassembling And Assembling Headlights
        • Subsequent Work
      • WM, 941619 Removing And Installing (Central) Headlight Control Unit
        • Preliminary Work
        • Removing And Installing (Central) Headlight Control Unit
        • Subsequent Work
      • WM, 941655 Replacing (Central) Headlight Control Unit
        • Tools
        • Replacing (Central) Headlight Control Unit
      • WM, 942919 Removing And Installing Number Plate Light
        • Removing Number Plate Light
        • Installing Number Plate Light
      • WM, 943119 Removing And Installing Tail Light
        • Technical Values
        • Removing Tail Light
        • Installing Tail Light
      • WM, 943619 Removing And Installing Brake Light Switch
        • Removing And Installing Brake Light Switch
      • WM, 944719 Removing And Installing Warning-Light Switch
        • Preliminary Work
        • Removing And Installing Warning-Light Switch
        • Subsequent Work
      • WM, 944919 Removing And Installing Front-End Electronics
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Front-End Electronics
        • Subsequent Work
      • WM, 944955 Replacing Control Unit For Front-End Electronics
        • Tools
        • Replacing Front-End Electronics Control Unit
      • WM, 945019 Removing And Installing Steering-Column Switch
        • Technical Values
        • Preliminary Work
        • Removing And Installing Steering-Column Switch
        • Subsequent Work
      • WM, 945319 Removing And Installing Side Direction Indicator Light
        • Removing And Installing Side Direction Indicator Light
      • WM, 945719 Removing And Installing Control Unit For Light Adjustment
        • Preliminary Work
        • Removing And Installing Control Unit For Light Adjustment
        • Subsequent Work
      • WM, 945819 Removing And Installing Headlight Light Bulb Control Unit
        • Preliminary Work
        • Removing Headlight Light Bulb Control Unit
        • Installing Headlight Light Bulb Control Unit
        • Subsequent Work
      • WM, 945955 Replacing Gas-Discharge Headlight
        • Preliminary Work For Replacing Gas-Discharge Headlight
        • Replacing Gas-Discharge Headlight
        • Subsequent Work For Replacing Gas-Discharge Headlight
      • WM, 946819 Removing And Installing Rear Fog Light
        • Technical Values
        • Installation Position
        • Preliminary Work
        • Removing Rear Fog Light
        • Installing Rear Fog Light
        • Subsequent Work
      • WM, 947019 Removing And Installing Additional Brake Light
        • Technical Values
        • Removing Additional Brake Light
          • Removing Auxiliary Brake Light
          • Installing Additional Brake Light
      • WM, 947119 Removing And Installing Auxiliary Headlight
        • Preliminary Work
        • Removing And Installing Auxiliary Headlight
        • Subsequent Work
      • WM, 947219 Removing And Installing Reversing Light Switch
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Reversing Light Switch
        • Installing Reversing Light Switch
        • Subsequent Work
      • WM, 947819 Removing And Installing Front Angle Sensor For Headlight Beam Adjustment
        • Technical Values
        • Removing And Installing Front Angle Sensor For Headlight Beam Adjustment
          • Removing Front Angle Sensor For Headlight Beam Adjustment
          • Installing Angle Sensor For Headlight Beam Adjustment
        • Subsequent Work
      • WM, 947919 Removing And Installing Rear Angle Sensor For Headlight Beam Adjustment
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear Angle Sensor For Headlight Beam Adjustment
          • Removing Rear Angle Sensor For Headlight Beam Adjustment
          • Installing Rear Angle Sensor For Headlight Beam Adjustment
        • Subsequent Work
  • Gauges & Instrument Panels
    • 90 Instruments -- 982 - BOXSTER/CAYMAN
      • WM, 900319 Removing And Installing Dashboard Insert
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Dashboard Insert
        • Subsequent Work
      • WM, 902219 Removing And Installing Stopwatch
        • Preliminary Work
        • Removing And Installing Stopwatch
        • Subsequent Work
      • WM, 902519 Removing And Installing Instrument Cluster
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Instrument Cluster
        • Subsequent Work
      • WM, 902555 Replacing Instrument Cluster
        • Replacing Instrument Cluster
      • WM, 903519 Removing And Installing Gateway Control Unit
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Gateway Control Unit
        • Subsequent Work
      • WM, 903555 Replacing Gateway Control Unit
        • Programming Gateway Control Unit
      • WM, 905019 Removing And Installing Horn
        • Component Information
          • Installation Position
        • Removing And Installing Horn
      • WM, 905819 Removing And Installing Plug Socket
        • Component Information
          • Information
          • Preliminary Work
            • Preliminary Work For Plug Socket In Right Footwell
          • Preliminary Work For Plug Socket In Centre Console
        • Removing And Installing Plug Socket
        • Subsequent Work
          • Subsequent Work For Plug Socket In Right Footwell
          • Subsequent Work For Plug Socket In Centre Console
      • WM, 906219 Removing And Installing Cigarette Lighter
        • Component Information
          • Installation Position Of Cigarette Lighter
        • Preliminary Work
        • Removing And Installing Cigarette Lighter
        • Subsequent Work
      • WM, 906419 Removing And Installing PCC/PVTS Control Unit
        • Preliminary Work
        • Removing Control Unit For Auxiliary Alarm System
        • Installing Control Unit For Auxiliary Alarm System
          • Installing Control Unit For Auxiliary Alarm System
        • Subsequent Work
      • WM, 906455 Replacing PCC/PVTS Control Unit
        • Replacing PCC/PVTS Control Unit
  • Infotainment
    • 91 Radio, On-Board Computer Park Assist -- 982 - BOXSTER/CAYMAN
      • WM, 911019 Removing And Installing Pcm Display And Operator Control Unit
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Pcm Display And Operator Control Unit
        • Installing Display And Operator Control Unit
        • Subsequent Work
      • WM, 911055 Replacing Pcm Display And Operator Control Unit
        • Replacing Pcm Display And Operator Control Unit
      • WM, 911319 Removing And Installing GPS Antenna
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing GPS Antenna
        • Subsequent Work
      • WM, 911719 Removing And Installing TV Tuner
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing TV Tuner
        • Subsequent Work
      • WM, 911755 Replacing TV Tuner
        • Replacing TV Tuner
      • WM, 912219 Removing And Installing Multimedia Interface
        • Component Information
          • Installation Position Of Multimedia Interface
          • Removing And Installing Multimedia Interface
      • WM, 912855 Replacing Antenna Lines (Antenna Amplifier To Pcm)
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Replacing Antenna Lines (Antenna Amplifier To Pcm)
        • Subsequent Work
      • WM, 912855 Replacing Antenna Line (GPS Antenna For Pcm)
        • Component Information
          • Installation Position
        • Preliminary Work
        • Replacing Antenna Line (GPS Antenna For Pcm)
        • Subsequent Work
      • WM, 912855 Replacing Antenna Lines (From Antenna Amplifier To TV Tuner)
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
          • Preliminary Work For Antenna Line From Antenna Amplifier On Driver's Side To TV Tuner
          • Preliminary Work For Antenna Line From Antenna Amplifier On Passenger's Side To TV Tuner
        • Replacing Antenna Line From Antenna Amplifier To TV Tuner
        • Subsequent Work
          • Subsequent Work For Antenna Lines From Antenna Amplifier On Driver's Side To TV Tuner
          • Subsequent Work For Antenna Lines From Antenna Amplifier On Passenger's Side To TV Tuner
      • WM, 913619 Removing And Installing Subwoofer
        • Component Information
          • Installation Position Of Subwoofer
        • Preliminary Work
        • Removing And Installing Subwoofer
        • Subsequent Work
      • WM, 913819 Removing And Installing SDARS Antenna
        • Technical Values
        • Component Information
          • Installation Position
        • Removing SDARS Antenna
        • Installing SDARS Antenna
      • WM, 913819 Removing And Installing SDARS Antenna (CAYMAN)
        • Technical Values
        • Preliminary Work
        • Removing SDARS Antenna (CAYMAN)
        • Installing SDARS Antenna (CAYMAN)
        • Subsequent Work
      • WM, 914019 Removing And Installing Front Central Loudspeaker
        • Component Information
          • Installation Position Of Front Loudspeakers
        • Preliminary Work
        • Removing And Installing Front Central Loudspeaker
        • Subsequent Work
      • WM, 914019 Removing And Installing Front Tweeter
        • Component Information
          • Installation Position Of Front Loudspeakers
        • Preliminary Work
        • Removing And Installing Front Tweeter
          • Removing And Installing Front Tweeter (Basic/High End)
          • Removing And Installing Front Tweeter (Premium)
        • Subsequent Work
      • WM, 914119 Front Door Speakers
        • Technical Values
        • Preliminary Work
        • Removing Front Loudspeakers
          • Removing Mid-Range Loudspeaker
        • Removing Woofer
        • Installing Front Loudspeakers
          • Installing Mid-Range Loudspeaker
        • Installing Woofer
        • Subsequent Work
      • WM, 914219 Removing And Installing Rear Loudspeaker
        • Component Information
          • Installation Position
        • Removing And Installing Rear Loudspeaker
      • WM, 914319 Removing And Installing Reversing Camera
        • Preliminary Work
        • Removing Reversing Camera
        • Installing Reversing Camera
        • Subsequent Work
      • WM, 914325 Calibrating Reversing Camera
        • Tools
        • Information
          • When Does Reversing Camera Need To Be Calibrated?
        • Preliminary Work
        • Calibrating Reversing Camera
        • Subsequent Work
      • WM, 914419 Removing And Installing Loudspeaker Booster
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Loudspeaker Booster
        • Subsequent Work
      • WM, 914455 Replacing Loudspeaker Amplifier
        • Replacing Loudspeaker Amplifier
      • WM, 914519 Removing And Installing Mobile Phone Antenna Amplifier
        • Preliminary Work
        • Removing Mobile Phone Antenna Amplifier
        • Installing Mobile Phone Antenna Amplifier
        • Subsequent Work
      • WM, 914719 Removing And Installing Mobile Communication Antenna In Front Apron
        • Component Information
          • Installation Position Of Mobile Communication Antenna In Front Apron
        • Preliminary Work
        • Removing And Installing Mobile Communication Antenna In Front Apron
        • Subsequent Work
      • WM, 914719 Removing And Installing Mobile Communication Antenna
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Mobile Communication Antenna
        • Subsequent Work
      • WM, 915219 Removing And Installing Central Computer
        • Technical Values
        • Preliminary Work
        • Removing And Installing Central Computer
          • Removing Central Computer
          • Installing Central Computer
        • Subsequent Work
      • WM, 915225 Programming Central Computer Data Update
        • Programming Central Computer Data Update
      • WM, 915225 Programming Navigation Update On Central Computer
        • Programming Navigation Update On Central Computer
      • WM, 915255 Replacing Central Computer
        • Tools
        • Replacing Central Computer
        • Subsequent Work
      • WM, 915719 Removing And Installing Microphone For Telephone
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Microphone For Telephone
        • Subsequent Work
      • WM, 916119 Removing And Installing Multi-Function Remote Control
        • Information
      • WM, 916219 Removing And Installing Control Unit For Steering Wheel Electronics
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Control Unit For Steering Wheel Electronics
        • Installing Control Unit For Steering Wheel Electronics
        • Subsequent Work
      • WM, 916255 Replacing Control Unit For Steering Wheel Electronics
        • Replacing Control Unit For Steering Wheel Electronics
      • WM, 916819 Removing And Installing Outside Temperature Sensor
        • Preliminary Work
        • Removing And Installing Outside Temperature Sensor
        • Subsequent Work
      • WM, 917019 Removing And Installing Control Unit For Lane Change Assist
        • Technical Values
        • Preliminary Work
        • Removing Control Unit For Lane Change Assist
          • Removing Lane Change Assist Control Unit
          • Installing Control Unit For Lane Change Assist
        • Subsequent Work
      • WM, 917025 Calibrating Control Unit For Lane Change Assist
        • Tools
        • Preliminary Work
        • Calibrating Control Unit For Lane Change Assist
      • WM, 917055 Replacing Control Unit For Lane Change Assist
        • Tools
        • Coding Control Unit For Lane Change Assist
        • Subsequent Work
      • WM, 917119 Removing And Installing Lane Change Assist Display
        • Removing Lane Change Assist Display
        • Installing Lane Change Assist Display
      • WM, 917419 Removing And Installing Control Unit For Park Assist
        • Component Information
          • Installation Position Of Control Unit For Parkassist
        • Preliminary Work
        • Removing And Installing Control Unit For PARKASSIST
        • Subsequent Work
      • WM, 917425 Calibrating Control Unit For Lane Change Assist
        • Tools
        • Information
        • Preliminary Work
        • Calibrating Control Unit For Lane Change Assist
          • Lane Change Assist Control Unit
      • WM, 917455 Replacing Control Unit For PARKASSIST
        • Replacing Control Unit For PARKASSIST
      • WM, 917519 Removing And Installing PARKASSIST Sensor
        • Preliminary Work
        • Removing PARKASSIST Sensor
        • Installing PARKASSIST Sensor
        • Subsequent Work
      • WM, 918419 Removing And Installing Antenna Amplifier
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Antenna Amplifier
        • Subsequent Work
      • WM, 918619 Removing And Installing Antenna Control Unit
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Antenna Control Unit
        • Subsequent Work
      • WM, 918819 Removing And Installing Telephone Console
        • Removing Telephone Console
        • Installing Telephone Console
      • WM, 919319 Removing And Installing USB/IPOD Control Unit
        • Component Information
          • Installation Position Of USB/iPod Control Unit
        • Preliminary Work
        • Removing And Installing USB/IPOD Control Unit
        • Subsequent Work
      • WM, 919601 Checking Era GLONASS Emergency Call System Battery
        • Tools
        • Checking Era GLONASS Emergency Call System Battery
      • WM, 919619 Removing And Installing Era GLONASS Emergency Call System
        • Technical Values
        • Removing Era GLONASS Emergency Call System
        • Installing Era GLONASS Emergency Call System
      • WM, 919625 Commissioning/Activating Era GLONASS Emergency Call System
        • Tools
        • Coding Emergency Call System
      • WM, 919655 Replacing Era GLONASS Emergency Call System Battery
        • Tools
        • Replacing Era GLONASS Emergency Call System Battery
  • Interior/Exterior Trim
    • 68 Interior Equipment -- 982 - BOXSTER/CAYMAN
      • WM, 680519 Removing And Installing Inner Door Sill Trim
        • Removing And Installing Inner Door Sill Trim
      • WM, 680719 Removing And Installing Cover Strip
        • Removing Cover Strip
        • Installing Cover Strip
      • WM, 681119 Removing And Installing Glove Compartment Lock
        • Removing And Installing Glove Compartment Lock
      • WM, 681219 Removing And Installing Glove Compartment Lid
        • Preliminary Work
        • Removing And Installing Glove Compartment Lid
        • Subsequent Work
      • WM, 681419 Removing And Installing Centre Console Trim
        • Removing And Installing Centre Console Trim
      • WM, 681519 Removing And Installing Glove Box
        • Technical Values
        • Preliminary Work
        • Removing And Installing Glove Box
        • Subsequent Work
      • WM, 681619 Removing And Installing Storage Compartment
        • Technical Values
        • Component Information
          • Information
        • Preliminary Work For Front Storage Compartment
        • Preliminary Work For Rear Storage Compartment
        • Removing Storage Compartment
          • Removing front storage compartment
          • Removing rear storage compartment
        • Installing Storage Compartment
          • Installing front storage compartment
          • Installing rear storage compartment
        • Subsequent Work
          • Subsequent work for front storage compartment
          • Subsequent work for rear storage compartment
      • WM, 681719 Removing And Installing Centre Console
        • Technical Values
        • Preliminary Work
        • Removing And Installing Centre Console
        • Subsequent Work
      • WM, 681719 Removing And Installing Upper Part Of Centre Console
        • Technical Values
        • Preliminary Work
          • Notes
          • Removing upper part of centre console
        • Installing Upper Part Of Centre Console
        • Subsequent Work
      • WM, 681737 Disassembling And Assembling Centre Console
        • Preliminary Work
        • Disassembling And Assembling Centre Console
        • Subsequent Work
      • WM, 681919 Removing And Installing Centre Console Cover
        • Preliminary Work
        • Removing And Installing Centre Console Cover
        • Removing And Installing Selector-Lever Cover
        • Subsequent Work
      • WM, 682019 Removing And Installing Front Ashtray
        • Component Information
          • Information
        • Preliminary Work
        • Removing And Installing Front Ashtray
        • Subsequent Work
      • WM, 682319 Removing And Installing Sun Visor
        • Technical Values
        • Removing And Installing Sun Visor
          • Removing and installing sun visors
      • WM, 682337 Disassembling And Assembling Sun Visor
        • Preliminary Work
        • Disassembling Sun Visor
        • Assembling Sun Visor
        • Subsequent Work
      • WM, 682719 Removing And Installing Interior Rear-View Mirror
        • Preliminary Work
        • Removing And Installing Interior Rear-View Mirror
        • Subsequent Work
      • WM, 683019 Removing And Installing CUPHOLDER
        • Component Information
          • Installation position of cupholder
        • Preliminary Work
        • Removing And Installing CUPHOLDER
        • Subsequent Work
      • WM, 684419 Removing And Installing Tunnel Support
        • Technical Values
        • Component Information
          • Installation position of tunnel support
        • Preliminary Work
          • Preliminary work for lower part of tunnel support
          • Preliminary work for upper part of tunnel support
        • Removing Tunnel Support
          • Removing lower part of tunnel support
          • Removing upper part of tunnel support
        • Installing Tunnel Support
          • Installing lower part of tunnel support
          • Installing upper part of tunnel support
        • Subsequent Work
          • Subsequent work for lower part of tunnel support
          • Subsequent work for upper part of tunnel support
      • WM, 684719 Removing And Installing Wind Deflector
        • Removing And Installing Wind Deflector
      • WM, 684819 Removing And Installing Cover For Tray
        • Preliminary Work
        • Removing And Installing Cover For Tray
          • Removing and installing upper part of lid for tray
          • Removing and installing lower part of lid for tray
        • Subsequent Work
      • WM, 689319 Removing And Installing Fire Extinguisher
        • Technical Values
        • Component Information
          • Installation position of fire extinguisher
        • Removing Fire Extinguisher
        • Removing Fire Extinguisher Tray
        • Installing Fire Extinguisher
    • 6X Body-Equipment Outside - General -- 982 - BOXSTER/CAYMAN
      • WM, 6X00IN22 Using PORSCHE 2-Component Window Adhesive
        • Tools
        • Technical Values
        • General Information
          • Version reference
          • Safety data sheet
          • Shelf life
          • Disposal
          • Bonding log
        • PORSCHE 2-Component Window Adhesive In Body Building
        • Working With PORSCHE 2-Component Window Adhesive
          • General information
          • Using adhesive set components
          • Application conditions
          • Preparing components
          • Preparing component - component with cut or pre-applied adhesive bead
          • Preparing component - new component without adhesive bead
          • Preparing vehicle flange - vehicle flange with cut adhesive bead
          • Preparing vehicle flange - vehicle flange with repair paint finish without adhesive bead
          • Joining process
          • Hardening
          • Assembly strength
          • Endurance strength
          • Work sample
      • WM, 6X00IN30 Working With Adhesive Tape And Adhesive Pads
        • Technical Values
        • General Information
          • Version
          • Shelf life
          • Disposal
          • Bonding log
        • Adhesive Tape And Adhesive Pads In Body Building
          • Adhesive tape and adhesive pads on the bodywork
        • Working With Adhesive Tape And Adhesive Pads
          • General information
          • Preparing bonding surfaces
            • Initial cleaning
            • Cleaning
          • Processing conditions
          • Joining process
          • Assembly and endurance strength
      • WM, 6X00IN Eliminating Symptoms On Body Exterior - Touching Up Paintwork (Swelling Of Clear Lacquer/SY4315)
        • Tools
        • Technical Values
        • General Information
          • Symptom
          • Cause, affected vehicles, remedial action
            • Cause
          • Tools and materials
          • Touching up paintwork
      • WM, 6X00IN Disposal Of Airbag And Seat-Belt PRETENSIONER Units
        • Tools
        • Disposal Of Airbag And Seat-Belt PRETENSIONER Units
        • Safety Procedures When Igniting Airbag Units
        • Tools And Materials
        • Connecting Ignition Tool
          • Driver's side
          • Passenger's side
          • Side airbag
          • Head airbag
          • Seat-belt pretensioners
          • Ignition module for front lid
          • Knee airbag
          • Pyrotechnical cutoff relay
      • WM, 6X00IN Handling And Replacing Airbag And Seat-Belt PRETENSIONER Units
        • Tools
        • Tools And Materials
          • Materials
        • General Warning Notes
          • General warnings for handling airbag and seat-belt pretensioner units
          • Warnings about assembly and straightening work
        • Information For Handling Airbag And Seat-Belt PRETENSIONER Units
          • Dangers for persons and the environment
          • Protective measures and rules of behaviour
          • Behaviour in cases of malfunction or danger
          • General information
      • WM, 6X00IN Technical Values
        • Technical Values
        • Technical Values - Occupant Protection
          • Passenger's airbag unit
          • Head airbag
          • Airbag sensor
          • Triggering unit for airbag
          • Knee airbag on passenger's side
          • Knee airbag on driver's side
          • Front side airbag
          • Interior equipment
          • Fire extinguisher
          • Roll-over bar
          • Side air intake frame
          • Air grille
          • Door entry guard
          • Bumper, front apron
          • Bumper on rear apron
          • Rear spoiler
          • Spoiler drive
          • Engine compartment cover
        • Technical Values For Glazing, Window Operation
          • Glazing, window control
          • Gap dimensions of door window
          • Gap dimensions of rear side window
          • Technical values for door arrester
          • Technical values for exterior mirrors
          • Rear-view mirror
          • Convertible top/accessories
          • Seal for cowl panel frame
          • Technical values for convertible top/roll-over bar
          • Technical values for tension bow
          • Technical values for roofliner
          • Technical values for convertible top covering
          • Technical values for convertible top linkage
          • Front seat belt
          • Six-point seat belt
          • Technical values for folding sports bucket seat
          • Technical values for supporting plate for headlights
          • Technical values - Rear side window
      • WM, 6X00IN General Information On Removing Car Windows
        • Technical Values
          • Notes
          • Cutting force for removing glass with cutting thread
        • Removing Glass
          • Removing glass with VAS 861 001 A
          • Removing glass with VAS 1474 B
    • 70 Linings, Insulation -- 982 - BOXSTER/CAYMAN
      • WM, 700219 - Removing And Installing Front Trim (Wing Flange)
        • Preliminary Work
        • Removing And Installing Front Trim (Wing Flange)
        • Subsequent Work
      • WM, 700519 - Removing And Installing Front Luggage Compartment Trim Panel
        • Preliminary Work
        • Removing And Installing Front Luggage Compartment Trim Panel
          • Removing And Installing Front Luggage Compartment
        • Subsequent Work
      • WM, 700619 - Removing And Installing Rear Luggage Compartment Trim Panel
        • Preliminary Work
        • Removing And Installing Rear Luggage Compartment Trim Panel
        • Subsequent Work
      • WM, 700819 - Removing And Installing Trim Panel For Convertible Top Compartment/Engine Compartment Lid
        • Preliminary Work
        • Removing And Installing Trim Panel For Convertible Top Compartment/Engine Compartment Trim Panel
        • Subsequent Work
      • WM, 701619 - Removing And Installing Dashboard Trim Panel
        • Component Information
          • Installation Position Of Dashboard Cover
        • Removing And Installing Dashboard Trim Panel
      • WM, 701819 - Removing And Installing Dashboard
        • Technical Values
        • Component Information
          • Installation Position Of Dashboard
        • Preliminary Work
        • Removing Dashboard
        • Installing Dashboard
        • Subsequent Work
      • WM, 701855 - Replacing Dashboard
        • Preliminary Work
        • Replacing Dashboard
        • Subsequent Work
      • WM, 701919 - Removing And Installing Trim Panel Under Dashboard
        • Component Information
          • Installation Position Of Trim Panel Under Dashboard
        • Preliminary Work
        • Removing And Installing Trim Panel Under Dashboard
        • Subsequent Work
      • WM, 702019 - Removing And Installing Cover For Dashboard (Defroster Trim)
        • Preliminary Work
        • Removing And Installing Cover For Dashboard (Defroster Trim)
          • Removing Cover For Dashboard (Defroster Trim)
          • Installing Cover For Dashboard (Defroster Trim)
        • Subsequent Work
      • WM, 702219 - Removing And Installing Cover (Cold Air Bulkhead)
        • Component Information
          • Installation Position Of Cover (Cold Air Bulkhead)
        • Removing And Installing Cover (Cold Air Bulkhead)
      • WM, 702419 - Removing And Installing Front Side-Section Trim Panel
        • Removing And Installing Front Side-Section Trim Panel
      • WM, 703119 - Removing And Installing Trim Panel For Rear Wall
        • Removing And Installing Trim Panel For Rear Wall
      • WM, 703519 - Removing And Installing Footrest
        • Removing And Installing Footrest
      • WM, 703919 - Removing And Installing Cover For Rear Lock Support
        • Removing And Installing Cover For Rear Lock Support
      • WM, 703919 - Removing And Installing Cover For Front Lock Support
        • Preliminary Work
        • Removing And Installing Cover For Front Lock Support
        • Subsequent Work
      • WM, 704119 - Removing And Installing Front Carpet
        • Installation Position
        • Preliminary Work
        • Removing And Installing Front Carpet
        • Subsequent Work
      • WM, 705719 - Removing And Installing A-Pillar Trim Panel
        • Preliminary Work
        • Removing A-Pillar Trim Panel
        • Installing A-Pillar Trim Panel
        • Subsequent Work
      • WM, 705819 - Removing And Installing Dashboard Molding
        • Removing And Installing Dashboard Molding
          • Removing And Installing Dashboard Molding On Driver's Side At The Left
          • Removing And Installing Dashboard Molding On Driver's Side At The Right
          • Removing And Installing Dashboard Molding On Passenger's Side
      • WM, 705919 - Removing And Installing Door Panel
        • Technical Values
        • Preliminary Work
        • Removing Front Door Panel
        • Installing Front Door Panel
        • Subsequent Work
      • WM, 706119 - Removing And Installing Trim For Door Panel
        • Removing Trim For Door Panel
        • Installing Trim For Door Panel
      • WM, 706319 - Removing And Installing Handle
        • Technical Values
        • Preliminary Work
        • Removing Handle
        • Installing Handle
        • Subsequent Work
      • WM, 707519 - Removing And Installing Side Trim Panel
        • Preliminary Work
        • Removing And Installing Side Trim Panel
        • Subsequent Work
      • WM, 708119 - Removing And Installing Trim Panel For Roll-Over Bar
        • Component Information
          • Installation Position Of Trim Panel For Roll-Over Bar
        • Preliminary Work
        • Removing And Installing Trim Panel For Roll-Over Bar
        • Subsequent Work
      • WM, 708319 - Removing And Installing Front Roof Trim Panel
        • Preliminary Work
        • Removing And Installing Front Roof Trim Panel
          • Removing And Installing Front Roof Trim Panel At The Centre
          • Removing And Installing Front Roof Trim Panel At The Sides
        • Subsequent Work
      • WM, 709019 - Removing And Installing Loudspeaker Trim Panel
        • Removing And Installing Loudspeaker Trim Panel
    • 7X Body-Equipment Inside - General -- 982 - BOXSTER/CAYMAN
      • WM, 7X00IN - Technical Values
        • Technical Values
        • 72 - Seat - Frames
          • Front Seat
  • Interior/Illumination Lights
    • 96 Lights, Lamps, Switches-Interior, Anti-Theft Protection -- 982 - BOXSTER/CAYMAN
      • WM, 961519 Removing And Installing FOOTWELL Light
        • Component Information
          • Installation Position Of Footwell Lights
          • Removing And Installing Footwell Light
      • WM, 962719 Removing And Installing Switch Console
        • Preliminary Work
        • Removing And Installing Switch Console
        • Subsequent Work
      • WM, 962755 Replacing Switch Console
        • Tools
        • Preliminary Work
        • Information
        • Enabling Sport/Sport Plus/Sport CHRONO Plus Function
        • Coding Keypad Assignment
        • Replacing Switch Console
      • WM, 963819 Removing And Installing Front Camera
        • Installation Position
        • Preliminary Work
        • Removing Front Camera
        • Installing Front Camera
        • Subsequent Work
      • WM, 963855 Replacing Front Camera
        • Tools
        • Information
          • When Does Front Camera Need To Be Calibrated?
        • Preliminary Work
        • Calibrating Front Camera
      • WM, 964019 Removing And Installing Rear Luggage Compartment Light
        • Installation Position
        • Removing And Installing Rear Luggage Compartment Light
          • Removing And Installing Rear Luggage Compartment Lamp
      • WM, 964019 Removing And Installing Luggage Compartment Light
        • Removing And Installing Luggage Compartment Light
      • WM, 966255 Replacing Remote Control (Hand-Held Transmitter)
        • Replacing Remote Control (Hand-Held Transmitter)
      • WM, 966319 Removing And Installing Inclination Sensor Control Unit
        • Information
      • WM, 966519 Removing And Installing Alarm Siren
        • Component Information
          • Installation Position Of Alarm Siren
        • Preliminary Work
        • Removing And Installing Alarm Siren
        • Subsequent Work
      • WM, 967819 Removing And Installing Control Unit For Garage Door Opener
        • Information
          • Spare Parts Information
        • Removing And Installing Control Unit For Garage Door Opener
      • WM, 967919 Removing And Installing Control Unit For Garage Door Opener
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Control Unit For Garage Door Opener
        • Subsequent Work
      • WM, 968519 Removing And Installing Interior Monitoring Sensor
        • Component Information
          • Installation Position Of Interior Surveillance Sensor
        • Preliminary Work
        • Removing And Installing Interior Monitoring Sensor
        • Subsequent Work
  • Seats
    • 72 Seat Frames -- 982 - BOXSTER/CAYMAN
      • WM, 720119 - Removing And Installing Folding Sports Bucket Seat
        • Technical Values
        • Preliminary Work
        • Removing And Installing Folding Sports Bucket Seat
        • Subsequent Work
      • WM, 720119 - Removing And Installing Front Seat
        • Technical Values
        • Removing And Installing Front Seat
        • Subsequent Work
      • WM, 720619 - Removing And Installing Air Cushion Switch
        • Component Information
          • Installation Position
        • Removing And Installing Air Cushion Switch
      • WM, 720955 - Replacing Seat Frame
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Seats Without Air Cushions
          • Preliminary Work For Seats With Air Cushions
        • Replacing Seat Frame
          • Removing Pressure Sensor Mat For Occupant Detection
          • Removing Seat Frame
          • Installing Seat Frame
          • Installing Pressure Sensor Mat For Occupant Detection
        • Subsequent Work
          • Subsequent Work For Seats Without Air Cushions
          • Subsequent Work For Seats With Air Cushions
      • WM, 721419 - Removing And Installing Air Cushion For Seat
        • Component Information
          • Installation Position Of Air Cushion For Seat
        • Preliminary Work
        • Removing And Installing Air Cushion For Seat
        • Subsequent Work
      • WM, 721619 - Removing And Installing Trim Panel For Seat
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Trim Panel For Seat
        • Subsequent Work
      • WM, 721719 - Removing And Installing Air Cushion For Backrest (Sports Seat Plus)
        • Technical Values
        • Component Information
          • Installation Position Of Air Cushion For Backrest
        • Preliminary Work
        • Removing Air Cushion For Backrest
        • Installing Air Cushion For Backrest
        • Subsequent Work
      • WM, 721955 - Replacing Backrest Frame (Air-Conditioned Comfort Seat)
        • Technical Values
        • Preliminary Work
        • Disassembling Backrest Frame (Air-Conditioned Comfort Seat)
          • Removing Foam Part
          • Removing Inner Spring On Backrest Frame
          • Removing Backrest Frame
          • Disassembling Backrest Frame
          • Assembling Backrest Frame
        • Subsequent Work
      • WM, 721955 - Replacing Backrest Frame
        • Technical Values
        • Preliminary Work
        • Disassembling Backrest Frame
          • Removing Foam Part
          • Removing Inner Spring On Backrest Frame
          • Disconnecting Wire Harness On Backrest Frame
          • Removing Backrest Frame
          • Assembling Backrest Frame
        • Subsequent Work
      • WM, 722419 - Removing And Installing Cushion Carrier For Front Backrest
        • Component Information
          • Installation Position Of Cushion Carrier For Front Backrest
        • Preliminary Work
        • Removing And Installing Cushion Carrier For Front Backrest
        • Subsequent Work
      • WM, 722419 - Removing And Installing Cushion Carrier For Front Backrest (Sports Seat Plus)
        • Component Information
          • Installation Position Of Cushion Carrier For Front Backrest
        • Preliminary Work
        • Removing And Installing Cushion Carrier For Front Backrest (Sports Seat Plus)
        • Subsequent Work
      • WM, 722519 - Removing And Installing BOWDEN Cable For Backrest Release
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing BOWDEN Cable For Backrest Release
        • Installing BOWDEN Cable For Backrest Release
        • Subsequent Work
      • WM, 722655 - Replacing Backrest Cover
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Backrest Cover
          • Removing Outer Backrest Cover
          • Removing Inner Backrest Cover
        • Installing Backrest Cover
          • Installing Inner Backrest Cover
          • Installing Outer Backrest Cover
        • Subsequent Work
      • WM, 722955 - Replacing Retainer Plate For Seat-Adjustment Motor
        • Technical Values
        • Preliminary Work
        • Removing And Installing Retainer Plate For Seat-Adjustment Motor
        • Subsequent Work
      • WM, 723155 - Replacing Control Button For Backrest Adjustment
        • Replacing Control Button For Backrest Adjustment
      • WM, 723319 - Removing And Installing Control Valve For Lumbar Support Adjustment
        • Component Information
          • Installation Position Of Control Valve For Lumbar Support
        • Preliminary Work
        • Removing And Installing Control Valve For Lumbar Support Adjustment
        • Subsequent Work
      • WM, 723419 - Removing And Installing Lumbar Support
        • Component Information
          • Installation Position Of Lumbar Support
        • Preliminary Work
        • Removing And Installing Lumbar Support
        • Subsequent Work
      • WM, 723655 - Replacing Lumbar-Support Motor
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Lumbar-Support Motor
        • Installing Lumbar-Support Motor
        • Checking Function Of Lumbar-Support Motor
        • Subsequent Work
      • WM, 723819 - Removing And Installing Control Valve For Air Cushion
        • Component Information
          • Installation Position Of Control Valve For Air Cushion
        • Preliminary Work
        • Removing And Installing Control Valve For Air Cushion
        • Subsequent Work
      • WM, 723955 - Replacing Air Cushion Motor
        • Component Information
          • Information
      • WM, 728619 - Removing And Installing Seat Adjustment Switch
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Seat Adjustment Switch
        • Subsequent Work
      • WM, 728719 - Removing And Installing Motor For Seat Adjustment
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Motor For Seat Adjustment
        • Installing Motor For Seat Adjustment
        • Subsequent Work
      • WM, 728819 - Removing And Installing Motor For Front Vertical Adjustment
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Motor For Front Vertical Adjustment
        • Installing Motor For Front Vertical Adjustment
        • Subsequent Work
      • WM, 728919 - Removing And Installing Motor For Backrest Adjustment
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Motor For Backrest Adjustment
        • Subsequent Work
      • WM, 729319 - Removing And Installing Control Unit For Memory Seat Adjustment
        • Tools
        • Component Information
          • Installation Position Of Control Unit For Memory Seat Adjustment
        • Preliminary Work
        • Removing And Installing Control Unit For Memory Seat Adjustment
        • Subsequent Work
      • WM, 729419 - Removing And Installing Switch For Memory Seat Adjustment
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Switch For Memory Seat Adjustment
        • Subsequent Work
    • 74 Seat Cushions, Seat Covers -- 982 - BOXSTER/CAYMAN
      • WM, 740819 - Removing And Installing Front Seat Extension
        • Preliminary Work
        • Removing And Installing Front Seat Extension
        • Subsequent Work
      • WM, 740919 - Removing And Installing Suction Fan For Seat Surface
        • Component Information
          • Installation Position Of Suction Fan For Seat Surface
        • Preliminary Work
          • Preliminary Work For Suction Fan For Seat Surface On Passenger's Side
          • Preliminary Work For Suction Fan For Seat Surface On Driver's Side
          • Removing And Installing Suction Fan For Seat Surface
        • Subsequent Work
          • Subsequent Work For Suction Fan For Seat Surface On Passenger's Side
          • Subsequent Work For Suction Fan For Seat Surface On Driver's Side
      • WM, 741019 - Removing And Installing Padding For Front Seat (Air-Conditioned Comfort Seat)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Seat (Air-Conditioned Comfort Seat)
        • Installing Padding For Front Seat (Air-Conditioned Comfort Seat)
        • Subsequent Work
          • Checking Seat Following Removal
      • WM, 741019 - Removing And Installing Padding For Front Seat
        • Preliminary Work
        • Removing Padding For Front Seat
        • Installing Padding For Front Seat
        • Subsequent Work
      • WM, 741319 - Removing And Installing Cover For Front Seat
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Front Seat Cover
        • Installing Front Seat Cover
        • Subsequent Work
      • WM, 741619 - Removing And Installing Suction Fan For Backrest Surface
        • Component Information
          • Installation Position Of Suction Fan For Backrest Surface
        • Preliminary Work
        • Removing And Installing Suction Fan For Backrest Surface
        • Subsequent Work
      • WM, 741719 - Removing And Installing Padding For Front Backrest (Sports Seat Plus)
        • Component Information
          • Installation Position Of Padding For Front Backrest (Sports Seat Plus)
        • Preliminary Work
        • Removing Padding For Front Backrest (Sports Seat Plus)
        • Installing Padding For Front Backrest (Sports Seat Plus)
        • Subsequent Work
      • WM, 741719 - Removing And Installing Padding For Front Backrest
        • Component Information
          • Installation Position Of Padding For Front Backrest
        • Preliminary Work
        • Removing Padding For Front Backrest
        • Installing Padding For Front Backrest
        • Subsequent Work
      • WM, 741819 - Removing And Installing Padding For Front Middle Backrest
        • Tools
        • Component Information
          • Installation Position Of Padding For Front Middle Backrest
        • Preliminary Work
        • Removing Padding For Front Middle Backrest
        • Installing Padding For Front Middle Backrest
        • Subsequent Work
      • WM, 741819 - Removing And Installing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Component Information
          • Installation Position Of Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Preliminary Work
        • Removing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Installing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Subsequent Work
      • WM, 741919 - Removing And Installing Front Backrest Cover
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Cover For Front Backrest
        • Installing Cover For Front Backrest
        • Subsequent Work
      • WM, 741919 - Removing And Installing Cover For Front Backrest (Sports Seat Plus)
        • Tools
        • Component Information
          • Installation Position Of Cover For Front Backrest (Sports Seat Plus)
        • Preliminary Work
        • Removing And Installing Cover For Front Backrest (Sports Seat Plus)
        • Subsequent Work
      • WM, 742019 - Removing And Installing Cover For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Cover For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Subsequent Work
      • WM, 742019 - Removing And Installing Cover For Front Middle Backrest
        • Component Information
          • Installation Position Of Cover For Front Middle Backrest
        • Removing And Installing Cover For Front Middle Backrest
      • WM, 742819 - Removing And Installing Heater Element For Front Seat
        • Component Information
          • Installation Position
        • Removing And Installing Heater Element For Front Seat
      • WM, 742819 - Removing And Installing Heating Element For Seat (Sports Seat Plus)
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Heating Element For Seat (Sports Seat Plus)
        • Removing And Installing Heating Element For Seat (Sports Seat Plus) With Active Seat Ventilation
          • Removing And Installing Heating Element For Seat Side Bolsters (Sports Seat Plus) With Active Seat Ventilation
          • Removing Heating Element For Seat (Sports Seat Plus) With Active Seat Ventilation
        • Installing Heating Element For Seat Surface (Sports Seat Plus) With Active Seat Ventilation
        • Subsequent Work
      • WM, 742819 - Removing And Installing Heating Element For Front Seat (Air-Conditioned Comfort Seat)
        • Component Information
          • Installation Position
        • Removing And Installing Heating Element For Front Seat (Air-Conditioned Comfort Seat)
      • WM, 742919 - Removing And Installing Heating Element For Front Backrest (Air-Conditioned Comfort Seat)
        • Component Information
          • Installation Position
        • Removing And Installing Heating Element For Front Backrest (Air-Conditioned Comfort Seat)
          • Removing And Installing Heating Element For Front Middle Backrest (Air-Conditioned Comfort Seat)
      • WM, 742919 - Removing And Installing Heating Element For Backrest (Sports Seat Plus)
        • Component Information
          • Installation Position
        • Removing And Installing Heating Element For Front Backrest (Sports Seat Plus)
          • Removing And Installing Heating Element For Front Middle Backrest (Sports Seat Plus)
          • Removing And Installing Heating Element For Front Backrest (Sports Seat Plus)
      • WM, 742919 - Removing And Installing Heater Element For Front Backrest
        • Component Information
          • Installation Position
        • Removing And Installing Heater Element For Front Backrest
  • Window Motors & Regulators
    • 64 Glazing, Window Operation -- 982 - BOXSTER/CAYMAN
      • WM, 641219 Removing And Installing Windscreen
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Windscreen
        • Preparing Window Aperture For Installation
        • Preparing Windscreen For Installation
          • Preparing windscreen for installation (re-installation only)
          • Preparing windscreen for installation (new windscreen)
        • Installing Windscreen
        • Subsequent Work
      • WM, 644015 Adjusting Front Door Window
        • Tools
        • Technical Values
        • Preliminary Work
        • Adjusting Front Door Window
        • Checking Preload Of Door Window
        • Adjusting Preload Of Door Window
        • Subsequent Work
      • WM, 644019 Removing And Installing Front Door Window
        • Tools
        • Preliminary Work
        • Removing Front Door Window
        • Installing Front Door Window
        • Subsequent Work
      • WM, 644049 Reworking (Coating) Front Door Window
        • General Warning Notes
          • Warning note for hydrophobic window
        • Preliminary Work
          • Checking window glass
          • Preparing components for processing
          • Cleaning window surfaces
      • WM, 644519 Removing And Installing Front Window Guide
        • Technical Values
        • Preliminary Work
        • Removing Front Window Guide
        • Installing Front Window Guide
        • Subsequent Work
      • WM, 644819 Removing And Installing Front Window Channel Seal
        • Removing Front Window Shaft Seal
        • Installing Front Window Channel Seal
      • WM, 645219 Removing And Installing Front Power Windows
        • Technical Values
        • Preliminary Work
        • Removing Front Power Windows
        • Installing Front Power Windows
        • Subsequent Work
      • WM, 645419 Removing And Installing Window Regulator Motor
        • Technical Values
        • Preliminary Work
        • Removing Window Regulator Motor
        • Installing Window Regulator Motor
        • Subsequent Work
      • WM, 645819 Removing And Installing Switch For Power Windows
        • Preliminary Work
        • Removing Switch For Power Windows
        • Installing Switch For Power Windows
        • Subsequent Work
      • WM, 648601 Checking Function Of Heated Rear Window
        • Tools
        • Checking Function Of Heated Rear Window
  • Wiper/Washer Systems
    • 92 Windscreen Wiper/Washer System -- 982 - BOXSTER/CAYMAN
      • WM, 921219 Removing And Installing Rain Sensor
        • Preliminary Work
        • Removing Rain Sensor
        • Pulling Off Electric Plug Connection
        • Installing Rain Sensor
        • Subsequent Work
      • WM, 921555 Replacing Wiper Motor
        • Replacing Wiper Motor
      • WM, 921919 Removing And Installing Wiper Linkage
        • Technical Values
        • Preliminary Work
        • Removing And Installing Wiper Linkage
        • Subsequent Work
      • WM, 922519 Removing And Installing Wiper Arm
        • Tools
        • Technical Values
        • Removing Wiper Arm
        • Installing Wiper Arm
      • WM, 923419 Removing And Installing Wiper Motor For Rear Window Washer
        • Component Information
          • Installation Position Of Wiper Motor For Rear Window Washer
        • Preliminary Work
        • Removing And Installing Wiper Motor For Rear Window Washer
        • Subsequent Work
      • WM, 924119 Removing And Installing Wiper Arm For Rear Window Washer
        • Component Information
          • Installation Position Of Wiper Arm For Rear Window Washer
          • Removing And Installing Wiper Arm For Rear Window Washer
      • WM, 924319 Removing And Installing Wiper Blade For Rear Window Washer
        • Removing And Installing Wiper Blade For Rear Window Washer
      • WM, 925619 Removing And Installing Windscreen-Washer Pump
        • Preliminary Work
        • Removing Pump For Windscreen Washer System
        • Subsequent Work
      • WM, 926019 Removing And Installing Windscreen-Washer Reservoir
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Windscreen-Washer Reservoir
        • Installing Windscreen-Washer Reservoir
        • Subsequent Work
      • WM, 926619 Removing And Installing Spray Nozzle For Windscreen Washer System
        • Tools
        • Component Information
        • Removing And Installing Spray Nozzle For Windscreen Washer System
          • Removing Spray Nozzle For Windscreen Washer System
          • Installing Spray Nozzle For Windscreen Washer System
      • WM, 926719 Removing And Installing Sender For Washer Fluid-Level Indicator
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Sender For Washer Fluid-Level Indicator
        • Installing Sender For Washer Fluid-Level Indicator
        • Subsequent Work
      • WM, 927219 Removing And Installing Spray Nozzle For Headlight Washer System
        • Preliminary Work
        • Removing And Installing Spray Nozzle For Headlight Washer System
        • Subsequent Work
      • WM, 927819 Removing And Installing Pump For Headlight Cleaning System
        • Preliminary Work
        • Component Information
          • Installation Position
        • Removing Pump For Headlight Cleaning System
        • Installing Pump For Headlight Cleaning System
        • Subsequent Work
  • Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.)
    • 97 Lines -- 982 - BOXSTER/CAYMAN
      • WM, 970909 Disconnecting And Fastening Main Wire Harness In Front Luggage Compartment
        • Preliminary Work
        • Disconnecting Main Wire Harness In Front Luggage Compartment
          • Disconnecting Main Wire Harness In Front Left Of Luggage Compartment
          • Disconnecting Main Wire Harness In Front Right Of Luggage Compartment
          • Loosening Main Wire Harness In Left Wheel Housing
          • Loosening Main Wire Harness In Right Wheel Housing
          • Disconnecting Main Wire Harness In Plenum Panel
          • Fastening Main Wire Harness In Front Luggage Compartment
        • Fastening Main Wire Harness In Front Luggage Compartment
          • Securing Main Wire Harness In Front Left Of Luggage Compartment
          • Securing Main Wire Harness In Front Right Of Luggage Compartment
        • Subsequent Work
          • Overview
          • Subsequent Work For Main Wire Harness In Left Wheel Housing
          • Subsequent Work For Main Wire Harness In Right Wheel Housing
          • Subsequent Work For Main Wire Harness In Plenum Panel
        • Component Information
          • Installation Position Of Main Wire Harness In Front Luggage Compartment
        • Preliminary Work For Main Wire Harness In Left Wheel Housing
        • Preliminary Work For Main Wire Harness In Right Wheel Housing
        • Preliminary Work For Main Wire Harness In Plenum Panel
      • WM, 970909 Loosening And Securing Main Wire Harness In Engine Compartment At The Left
        • Component Information
          • Installation Position Of Main Wire Harness In Engine Compartment (Left)
        • Preliminary Work
        • Loosening Main Wire Harness In Engine Compartment At The Left
        • Securing Main Wire Harness In Engine Compartment At The Left
        • Subsequent Work
      • WM, 970909 Loosening And Securing Main Wire Harness In Right A-Pillar Area
        • Component Information
          • Installation Position Of Main Wire Harness In Right A-Pillar Area
        • Preliminary Work
        • Loosening And Securing Main Wire Harness In Right A-Pillar Area
        • Subsequent Work
      • WM, 970909 Loosening And Securing Main Wire Harness In Engine Compartment At The Right
        • Component Information
          • Installation Position Of Main Wire Harness In Engine Compartment (Right)
        • Preliminary Work
        • Loosening Main Wire Harness In Engine Compartment At The Right
        • Securing Main Wire Harness In Engine Compartment At The Right
        • Subsequent Work
      • WM, 970909 Loosening And Securing Main Wire Harness In Passenger Compartment At The Right
        • Technical Values
        • Component Information
          • Installation Position Of Main Wire Harness In Passenger Compartment At The Right
        • Preliminary Work
        • Loosening Main Wire Harness In Passenger Compartment At The Right
        • Securing Main Wire Harness In Passenger Compartment At The Right
        • Subsequent Work
      • WM, 970909 Loosening And Securing Main Wire Harness In Left A-Pillar Area
        • Technical Values
        • Component Information
          • Installation Position Of Main Wire Harness In Left A-Pillar Area
        • Preliminary Work
        • Loosening Main Wire Harness In Left A-Pillar Area
        • Securing Main Wire Harness In Left A-Pillar Area
        • Subsequent Work
      • WM, 970909 Loosening And Securing Main Wire Harness In Passenger Compartment At The Left
        • Component Information
          • Installation Position Of Main Wire Harness In Passenger Compartment At The Left
        • Preliminary Work
        • Loosening Main Wire Harness In Passenger Compartment At The Left
        • Securing Main Wire Harness In Passenger Compartment At The Left
        • Subsequent Work
      • WM, 970909 Loosening And Securing Main Wire Harness In Luggage Compartment (Rear)
        • Component Information
          • Installation Position Of Main Wire Harness In Rear Luggage Compartment
          • Installation Position Of Main Wire Harness In Luggage Compartment (Rear)
        • Preliminary Work
        • Loosening And Securing Main Wire Harness In Luggage Compartment (Rear)
          • Loosening And Fastening Main Wire Harness In Luggage Compartment (Rear)
        • Subsequent Work
      • WM, 970909 Loosening And Securing Main Wire Harness In Convertible Top Compartment
        • Preliminary Work
        • Loosening And Securing Main Wire Harness In Convertible Top Compartment
        • Subsequent Work
      • WM, 970919 Removing And Installing Main Wire Harness
        • Component Information
          • Installation Position Of Main Wire Harness
        • Preliminary Work
        • Removing Main Wire Harness
        • Installing Main Wire Harness
        • Subsequent Work
      • WM, 971519 Removing And Installing Front Wire Harness
        • Component Information
          • Installation Position Of Front Wire Harness
        • Preliminary Work
        • Removing And Installing Front Wire Harness
        • Subsequent Work
      • WM, 972019 Removing And Installing Wire Harness For Centre Console
        • Component Information
          • Installation Position Of Wire Harness For Centre Console
        • Preliminary Work
        • Removing And Installing Wire Harness For Centre Console
        • Subsequent Work
      • WM, 972719 Removing And Installing Wire Harness In Rear Lid
        • Component Information
          • Installation Position Of Wire Harness In Rear Lid
        • Preliminary Work
        • Removing And Installing Wire Harness In Rear Lid
        • Subsequent Work
      • WM, 973219 Removing And Installing Wire Harness For Door
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Door Panel
          • Preliminary Work For Door Sub-Frame
        • Component Information
        • Removing Wire Harness For Door
          • Removing Wire Harness For Door In The Door Panel
          • Removing Wire Harness For Door In Door Sub-Frame
          • Installing Wire Harness For Door In Door Sub-Frame
          • Installing Wire Harness For Door In Door Panel
        • Subsequent Work
          • Subsequent Work For Door Sub-Frame
          • Subsequent Work For Door Panel
      • WM, 974519 Removing And Installing Wire Harness For Battery Wiring
        • Technical Values
        • Component Information
          • Installation Position Of Wire Harness For Battery Wiring
        • Preliminary Work
          • Preliminary Work For Removing B+ Line For Battery
          • Preliminary Work For Removing B+ Line From Power Distributor To Connection Point In Engine Compartment
          • Preliminary Work For Removing B+ Line From Connection Point In Engine Compartment To Generator
        • Removing And Installing Wire Harness For Battery Wiring
          • Removing And Installing B+ Line For Battery
          • Removing And Installing B+ Line From Power Distributor To Connection Point In Engine Compartment
          • Removing And Installing B+ Line From Connection Point In Engine Compartment To Generator
        • Subsequent Work
          • Subsequent Work For Installing B+ Line For Battery
          • Subsequent Work For Installing B+ Line From Power Distributor To Connection Point In Engine Compartment
          • Subsequent Work For Installing B+ Line From Connection Point In Engine Compartment To Generator
      • WM, 974619 Removing And Installing Cutoff Relay
        • Technical Values
        • Component Information
          • Installation Position Of Cutoff Relay
        • Preliminary Work
        • Removing And Installing Cutoff Relay
        • Subsequent Work
      • WM, 975219 Removing And Installing Wire Harness For Engine
        • Technical Values
        • Component Overview Of Engine Wire Harness
        • Preliminary Work
        • Removing Wire Harness For Engine
        • Installing Wire Harness For Engine
        • Subsequent Work
      • WM, 975319 Removing And Installing Wire Harness For Seat Heating
        • Information
          • Spare Parts Information
      • WM, 975519 Removing And Installing Wire Harness For Convertible Top
        • Preliminary Work
        • Removing And Installing Wire Harness For Convertible Top
          • Removing And Installing Wire Harness For Convertible Top At The Left
          • Removing And Installing Wire Harness For Convertible Top At The Right
        • Subsequent Work
      • WM, 975619 Removing And Installing Wire Harness For Backrest (Front Seat)
        • Technical Values
        • Preliminary Work
        • Removing And Installing Wire Harness For Backrest (Front Seat)
        • Subsequent Work
      • WM, 975719 Removing And Installing Wire Harness For Power Seats
        • Component Information
          • Installation Position Of Wire Harness For Power Seats
        • Preliminary Work
        • Removing Wire Harness For Power Seats
        • Installing Wire Harness For Power Seats
        • Subsequent Work
      • WM, 975919 Removing And Installing Wire Harness For Park Assist
        • Preliminary Work
        • Removing Wire Harness For Park Assist
        • Installing Wire Harness For Park Assist
        • Subsequent Work
      • WM, 976555 Replace Abs Wire Harness
        • Component Information
        • Preliminary Work
          • Preliminary Work For Front ABS Wire Harness
        • Preliminary Work For Rear Abs Wire Harness
        • Removing Wire Harness For Anti-Lock Brake System (Abs)
          • Removing Wire Harness For Front ABS
          • Removing Wire Harness For Rear ABS
        • Installing Wire Harness For Anti-Lock Brake System (Abs)
          • Installing Wire Harness For Front ABS
          • Installing Wire Harness For Rear ABS
        • Subsequent Work
          • Subsequent Work For Front ABS Wire Harness
          • Subsequent Work For Rear ABS Wire Harness
      • WM, 976623 Installing Wire Harness For Airbag
        • Tools
        • Component Information
          • Installation Position Of Airbag Wire Harness
        • Preliminary Work
          • Preliminary Work For Line From Front Sensor To Triggering Unit
          • Preliminary Work For Line From Sensor On Side Member To Triggering Unit
        • Disconnecting Wire Harness For Airbag
        • Installing Wire Harness For Airbag
          • Installing Line From Front Left Sensor To Triggering Unit
          • Installing Line From Front Right Sensor To Triggering Unit
          • Installing Line From Sensor On Left Side Member To Triggering Unit
          • Installing Line From Sensor On Right Side Member To Triggering Unit
        • Subsequent Work
          • Subsequent Work For Line From Front Sensor To Triggering Unit
          • Subsequent Work For Line From Sensor On Side Member To Triggering Unit
      • WM, 977223 Installing Optical WAVEGUIDE (Pcm To Loudspeaker Amplifier)
        • Component Information
          • Installation Position Of Optical Waveguide (PCM To Loudspeaker Booster)
        • Preliminary Work
        • Disconnecting Optical WAVEGUIDE (Pcm To Loudspeaker Booster)
        • Installing Optical WAVEGUIDE (Pcm To Loudspeaker Amplifier)
          • Notes
          • Subsequent Work
      • WM, 977223 Installing Optical WAVEGUIDE (Pcm To TV Tuner)
        • Component Information
          • Installation Position Of Optical Waveguide (PCM To TV Tuner)
        • Preliminary Work
        • Disconnecting Optical WAVEGUIDE (Pcm To TV Tuner)
        • Installing Optical WAVEGUIDE (Pcm To TV Tuner)
        • Subsequent Work
      • WM, 977223 Installing Optical WAVEGUIDE (Pcm To Loudspeaker Booster And TV Tuner)
        • Component Information
          • Installation Position Of Optical Waveguide (PCM To Loudspeaker Booster And TV Tuner)
          • Installing Optical Waveguide (PCM To Loudspeaker Booster And TV Tuner)
      • WM, 978309 Loosening And Securing Relay Carrier 1
        • Component Information
          • Installation Position
        • Preliminary Work
        • Loosening Relay Carrier 1
        • Securing Relay Carrier 1
        • Subsequent Work
      • WM, 978409 Loosening And Securing Fuse Box
        • Component Information
          • Installation Position
        • Preliminary Work
        • Loosening Fuse Box
        • Securing Fuse Box
        • Subsequent Work
      • WM, 978919 Removing And Installing Power Distributor
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Power Distributor
        • Installing Power Distributor
        • Subsequent Work
      • WM, 979009 Detaching And Securing Relay Carrier
        • Component Information
          • Preliminary Work
        • Loosening Relay Carrier In Luggage Compartment At The Right
        • Fastening Relay Carrier In Luggage Compartment At The Right
        • Subsequent Work
      • WM, 979255 Replacing Fuse Element On Vehicle Electrical System Battery
        • Technical Values
        • Component Information
          • Installation Positions Of Fuse Elements
        • Preliminary Work
        • Replacing Fuse Element On Vehicle Electrical System Battery
        • Subsequent Work
      • WM, 979255 Replacing Fuse Element In Passenger Compartment
        • Technical Values
        • Component Information
          • Installation Positions Of Fuse Elements
        • Preliminary Work
        • Replacing Fuse Element In Passenger Compartment
        • Subsequent Work
• Body & Frame
  • Door Locks
    • 57 Front Door Central Locking -- 982 - BOXSTER/CAYMAN
      • WM, 570837 Disassembling And Assembling Key
        • Disassembling And Assembling Key
      • WM, 570919 Removing And Installing Lock Cylinder
        • Preliminary Work
        • Removing Lock Cylinder
        • Installing Lock Cylinder
        • Subsequent Work
      • WM, 571119 Removing And Installing Outer Front Door Handle
        • Technical Values
        • Preliminary Work
        • Removing Outer Front Door Handle
        • Installing Outer Front Door Handle
        • Subsequent Work
      • WM, 571719 Removing And Installing Door Lock
        • Technical Values
        • Preliminary Work
        • Removing Door Lock
        • Installing Door Lock
        • Subsequent Work
      • WM, 572619 Removing And Installing Striker Pin
        • Tools
        • Technical Values
        • Removing Striker Pin
        • Installing Striker Pin
        • Adjusting Lock Peg (Striker Pin)
      • WM, 573019 Removing And Installing Door Sub-Frame
        • Technical Values
        • Preliminary Work
        • Removing Door Sub-Frame
          • Disconnecting Wire Harness For Door
        • Removing Front Door Sub-Frame
        • Installing Door Sub-Frame
        • Subsequent Work
      • WM, 573055 Replacing Door Sub-Frame
        • Preliminary Work
        • Subsequent Work
      • WM, 574519 Removing And Installing Door Opener
        • Technical Values
        • Preliminary Work
        • Removing Door Opener
        • Installing Door Opener
        • Subsequent Work
      • WM, 575115 Adjusting Front Door
        • Tools
        • Technical Values
        • Adjusting Front Door
      • WM, 575119 Removing And Installing Front Door
        • Technical Values
        • Preliminary Work
        • Removing Front Door
        • Installing Front Door
        • Subsequent Work
      • WM, 575137 Disassembling And Assembling Front Door
        • Parts
        • Technical Values
        • Disassembling Front Door
        • Assembling Front Door
      • WM, 575319 Removing And Installing Door Hinge
        • Technical Values
        • Preliminary Work
        • Removing Front Door Hinge
        • Installing Front Door Hinge
        • Subsequent Work
      • WM, 575355 Replacing Door Hinge (On Body Side)
        • Preliminary Work
        • Safety Instructions And Information On Quality
        • Removing Door Hinge (On Body Side)
        • Preparing Door Hinge (On Body Side) For Installation
        • Preparing Connection Areas Of The Body For Installing The Door Hinge (On Body Side)
        • Installing Door Hinge (On Body Side)
        • Subsequent Work
      • WM, 575919 Removing And Installing Door Arrester
        • Technical Values
        • Preliminary Work
        • Removing Door Arrester
          • Loosening Door Arrester On Body Side
        • Installing Door Arrester
          • Securing Door Arrester At The Door Side
          • Securing Door Arrester On Body Side
        • Subsequent Work
      • WM, 576319 Removing And Installing Rubber Seal For Front Door
        • Preliminary Work
        • Removing Rubber Seal For Front Door
        • Installing Rubber Seal For Front Door
        • Subsequent Work
      • WM, 576419 Removing And Installing B-Pillar Seal
        • Technical Values
        • Preliminary Work
        • Removing B-Pillar Seal
        • Installing B-Pillar Seal
        • Subsequent Work
      • WM, 576519 Removing And Installing Rubber Seal For Door (On Door Side)
        • Preliminary Work
        • Removing Outer Rubber Seal For Front Door
        • Installing Outer Rubber Seal For Front Door
        • Subsequent Work
      • WM, 577319 Removing And Installing Door Control Unit
        • Tools
        • Preliminary Work
        • Removing Door Control Unit
        • Installing Front Door Control Unit
        • Subsequent Work
      • WM, 578919 Removing And Installing Control Unit For Rear-End Electronics
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Control Unit For Rear-End Electronics
        • Subsequent Work
      • WM, 578955 Replacing Control Unit For Rear-End Electronics
        • Replacing Rear-End Electronics
    • 96 Lights, Lamps, Switches-Interior, Anti-Theft Protection -- 982 - BOXSTER/CAYMAN
      • WM, 961519 Removing And Installing FOOTWELL Light
        • Component Information
          • Installation Position Of Footwell Lights
          • Removing And Installing Footwell Light
      • WM, 962719 Removing And Installing Switch Console
        • Preliminary Work
        • Removing And Installing Switch Console
        • Subsequent Work
      • WM, 962755 Replacing Switch Console
        • Tools
        • Preliminary Work
        • Information
        • Enabling Sport/Sport Plus/Sport CHRONO Plus Function
        • Coding Keypad Assignment
        • Replacing Switch Console
      • WM, 963819 Removing And Installing Front Camera
        • Installation Position
        • Preliminary Work
        • Removing Front Camera
        • Installing Front Camera
        • Subsequent Work
      • WM, 963855 Replacing Front Camera
        • Tools
        • Information
          • When Does Front Camera Need To Be Calibrated?
        • Preliminary Work
        • Calibrating Front Camera
      • WM, 964019 Removing And Installing Rear Luggage Compartment Light
        • Installation Position
        • Removing And Installing Rear Luggage Compartment Light
          • Removing And Installing Rear Luggage Compartment Lamp
      • WM, 964019 Removing And Installing Luggage Compartment Light
        • Removing And Installing Luggage Compartment Light
      • WM, 966255 Replacing Remote Control (Hand-Held Transmitter)
        • Replacing Remote Control (Hand-Held Transmitter)
      • WM, 966319 Removing And Installing Inclination Sensor Control Unit
        • Information
      • WM, 966519 Removing And Installing Alarm Siren
        • Component Information
          • Installation Position Of Alarm Siren
        • Preliminary Work
        • Removing And Installing Alarm Siren
        • Subsequent Work
      • WM, 967819 Removing And Installing Control Unit For Garage Door Opener
        • Information
          • Spare Parts Information
        • Removing And Installing Control Unit For Garage Door Opener
      • WM, 967919 Removing And Installing Control Unit For Garage Door Opener
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Control Unit For Garage Door Opener
        • Subsequent Work
      • WM, 968519 Removing And Installing Interior Monitoring Sensor
        • Component Information
          • Installation Position Of Interior Surveillance Sensor
        • Preliminary Work
        • Removing And Installing Interior Monitoring Sensor
        • Subsequent Work
  • Exterior Body Panels
    • 50 - Body Front
      • WM, 501055 Replacing Front Closing Panel
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Front Closing Panel
        • Preparing Front Closing Panel For Installation
        • Preparing Connection Areas Of Body For Installing Closing Panel
        • Installing Front Closing Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 501455 Replacing Front Panel
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Front Panel
        • Preparing Connection Areas Of Body For Installing Front Panel
        • Preparing Front Panel For Installation
        • Installing Front Panel
          • Installing Front Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 502055 Replacing Floor Front Section
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Floor Front Section
        • Preparing Floor Front Section For Installation
        • Preparing Connection Areas Of Body For Installing Floor Front Section
          • Preparing Connection Areas Of Body For Installing Floor Front Section
        • Installing Floor Front Section
          • Installing Floor Front Section
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 502355 Replacing Luggage Compartment Bracket
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (Without Straightening System)
          • Safety Instructions And Information On Quality
        • Tools And Materials
          • Tools And Materials
        • Removing Luggage Compartment Bracket
        • Preparing Front Luggage Compartment Bracket For Installation
          • Preparing Luggage Compartment Bracket For Installation
        • Preparing Connection Areas Of Body For Installing Luggage Compartment Bracket
        • Installing Luggage Compartment Bracket
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 503955 Replacing Spring Strut Mount
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Spring Strut Mount
        • Preparing Spring Strut Mount For Installation
        • Preparing Connection Areas Of Body For Installing Spring Strut Mount
        • Installing Spring Strut Mount
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 504255 Replacing Radiator Support
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Radiator Support
        • Preparing Radiator Support For Installation
        • Preparing Connection Areas Of The Body For Installing Radiator Support
        • Installing Radiator Support
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 505355 Replacing Wing Joining Plate
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Wing Joining Plate
        • Preparing Front Wing Joining Plate For Installation
        • Preparing Connection Areas Of Body For Installing Wing Joining Plate
        • Installing Wing Joining Plate
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 505519 Removing And Installing Front Wing
        • Notes
        • Preliminary Work
        • Removing And Installing Front Wing
        • Subsequent Work
      • WM, 505619 Removing And Installing Front Wheel Housing Liner
        • Notes
        • Preliminary Work
        • Removing And Installing Front Wheel Housing Liner
          • Removing And Installing Front Wheel Housing Liner - Rear Part
        • Removing And Installing Front Wheel Housing Liner - Front Part
        • Subsequent Work
      • WM, 507255 Replacing Longitudinal Member For Wheel Housing Upper Section
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Information
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Longitudinal Member For Wheel Housing Upper Section
        • Preparing Longitudinal Member For Wheel Housing
        • Preparing Connection Areas Of Body For Installing Longitudinal Member For Wheel Housing
        • Installing Longitudinal Member For Wheel Housing
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 507455 Replacing Front Wheel Housing
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Front Wheel Housing
          • Notes
          • Preparing Front Wheel Housing For Installation
        • Preparing Connection Areas Of Body For Installing Front Wheel Housing
        • Installing Front Wheel Housing
        • Subsequent Work
          • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 507955 Replacing Front Side Member (Section)
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety Instructions And Information On Quality
        • Removing Front Side Member
        • Preparing Connection Areas Of Body For Installing Side Member
          • Replacing Rivet Nut
        • Preparing Front Side Member For Installation
        • Installing Front Side Member
        • Subsequent Work
        • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 508419 Removing And Installing Battery Console
        • Notes
        • Preliminary Work
        • Removing And Installing Battery Console
        • Subsequent Work
      • WM, 508719 Removing And Installing Cowl Panel Cover
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Cowl Panel Cover
        • Subsequent Work
      • WM, 509555 Replacing Body Front Section
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Body Front Section
        • Preparing Body Front Section For Installation
        • Preparing Connection Areas Of Body For Installing Body Front Section
        • Installing Body Front Section
        • Cavity Preservation
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Staightening System)
    • 50 Body, Front -- 982 - BOXSTER/CAYMAN
      • WM, 501055 Replacing Front Closing Panel
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Front Closing Panel
        • Preparing Front Closing Panel For Installation
        • Preparing Connection Areas Of Body For Installing Closing Panel
        • Installing Front Closing Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 501455 Replacing Front Panel
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Front Panel
        • Preparing Connection Areas Of Body For Installing Front Panel
        • Preparing Front Panel For Installation
        • Installing Front Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 502055 Replacing Floor Front Section
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Floor Front Section
        • Preparing Floor Front Section For Installation
        • Preparing Connection Areas Of Body For Installing Floor Front Section
        • Installing Floor Front Section
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 502355 Replacing Luggage Compartment Bracket
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Luggage Compartment Bracket
        • Preparing Front Luggage Compartment Bracket For Installation
          • Preparing Luggage Compartment Bracket For Installation
          • Preparing Connection Areas Of Body For Installing Luggage Compartment Bracket
          • Installing Luggage Compartment Bracket
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 503955 Replacing Spring Strut Mount
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Spring Strut Mount
        • Preparing Spring Strut Mount For Installation
        • Preparing Connection Areas Of Body For Installing Spring Strut Mount
        • Installing Spring Strut Mount
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 504255 Replacing Radiator Support
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Radiator Support
        • Preparing Radiator Support For Installation
        • Preparing Connection Areas Of The Body For Installing Radiator Support
        • Installing Radiator Support
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 505355 Replacing Wing Joining Plate
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Wing Joining Plate
        • Preparing Front Wing Joining Plate For Installation
        • Preparing Connection Areas Of Body For Installing Wing Joining Plate
        • Installing Wing Joining Plate
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 505519 Removing And Installing Front Wing
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Wing
        • Subsequent Work
      • WM, 505619 Removing And Installing Front Wheel Housing Liner
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Wheel Housing Liner
          • Removing And Installing Front Wheel Housing Liner - Rear Part
          • Removing And Installing Front Wheel Housing Liner - Front Part
        • Subsequent Work
      • WM, 507255 Replacing Longitudinal Member For Wheel Housing Upper Section
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Information
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Longitudinal Member For Wheel Housing Upper Section
        • Preparing Longitudinal Member For Wheel Housing
        • Preparing Connection Areas Of Body For Installing Longitudinal Member For Wheel Housing
        • Installing Longitudinal Member For Wheel Housing
        • Subsequent Work
          • Overview
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 507455 Replacing Front Wheel Housing
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Front Wheel Housing
        • Preparing Front Wheel Housing For Installation
        • Preparing Connection Areas Of Body For Installing Front Wheel Housing
        • Installing Front Wheel Housing
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 507955 Replacing Front Side Member (Section)
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (With Straightening System)
          • Safety Instructions And Information On Quality
        • Removing Front Side Member
        • Preparing Connection Areas Of Body For Installing Side Member
          • Replacing Rivet Nut
        • Preparing Front Side Member For Installation
        • Installing Front Side Member
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 508419 Removing And Installing Battery Console
        • Technical Values
        • Preliminary Work
        • Removing And Installing Battery Console
        • Subsequent Work
      • WM, 508719 Removing And Installing Cowl Panel Cover
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Cowl Panel Cover
        • Subsequent Work
      • WM, 509555 Replacing Body Front Section
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Body Front Section
        • Preparing Body Front Section For Installation
        • Preparing Connection Areas Of Body For Installing Body Front Section
        • Installing Body Front Section
        • Cavity Preservation
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • 5095IN Video
    • 51 - Body Center, Roof, Frame
      • WM, 510355 Replacing Roof
        • Notes
        • Preliminary Work
          • Safety and quality instructions
            • Safety instructions and information on quality
        • Tools And Materials
        • Removing Roof
      • WM, 510655 Replacing Upper Front Roof Frame
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
          • Preliminary work
        • Safety Instructions And Information On Quality
        • Tools And Materials
          • Removing upper front roof frame
          • Preparing upper front roof frame for installation
        • Preparing Body Connection Areas
          • Installing upper front roof frame
            • Subsequent work
              • Notes
              • Subsequent work for body repairs (without straightening system)
      • WM, 511355 Replacing A-Pillar Reinforcement
        • Notes
        • Preliminary Work
          • Notes
          • Safety instructions and information on quality
        • Tools And Materials
          • Removing A-pillar reinforcement
        • Preparing A-Pillar Reinforcement
          • Preparing connection areas of the body for A-pillar reinforcement
            • Installing A-pillar reinforcement
        • Subsequent Work
      • WM, 514555 Replacing Outer Side Member
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Outer Side Member
        • Preparing Outer Side Member For Installation
          • Preparing body connection areas
            • Preparing connection areas of the body
        • Installing Outer Side Member
          • Subsequent work
            • Notes
            • Subsequent work for body repairs (without straightening system)
      • WM, 51735561 Replacing FLOORPAN
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Tools and materials
        • Removing FLOORPAN
        • Preparing FLOORPAN For Installation
          • Preparing connection areas of the body for installation
          • Installing floorpan
        • Subsequent Work
      • WM, 514855 Replacing Centre Side Member (Section)
        • Notes
        • Preliminary Work
          • Safety and quality instructions
            • Safety instructions and information on quality
        • General Warning Notes
          • Safety instructions for body repairs
        • Tools And Materials
          • Removing centre side member
        • Preparing Centre Side Member For Installation
        • Preparing Connection Areas Of Body For Installing Centre Side Member
          • Installing centre side member
        • Subsequent Work
          • Subsequent work for body repairs (without straightening system)
      • WM, 518755 Replacing Seat Cross Member
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Tools and materials
            • Removing seat cross member
              • Preparing seat cross member
        • Preparing Connection Points On The Body
          • Preparing body connection points
          • Installing seat cross member
        • Subsequent Work
          • Subsequent work for body repairs (without straightening system)
      • WM, 519219 Removing And Installing Cover For Front Underbody
        • Notes
        • Preliminary Work
          • Notes
          • Removing and installing cover for front underbody
      • WM, 519319 Removing And Installing Cover For Centre Underbody
        • Notes
        • Component Information
          • Installation position of centre underbody cover (at the sides)
        • Preliminary Work
        • Removing And Installing Cover For Centre Underbody At The Sides
      • WM, 510555 Replacing Roof Pillar (Reinforcement)
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Roof Pillar (Reinforcement)
        • Preparing Roof Pillar (Reinforcement) For Installation
        • Preparing Body Connection Areas
          • Preparing connection areas of the body
        • Installing Roof Pillar (Reinforcement)
        • Subsequent Work
          • Subsequent work
          • Subsequent work for body repairs (without straightening system)
      • WM, 510555 Replacing Roof Pillar
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Roof Pillar
        • Preparing Roof Pillar For Installation
        • Preparing Connection Points On The Body
        • Installing Roof Pillar
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 510955 Replacing Rear Cross Member
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Information
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Cross Member
        • Preparing Rear Cross Member For Installation
        • Preparing Body Connection Areas
          • Preparing connection areas of the body
        • Installing Rear Cross Member
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 511255 Replacing A-Pillar
        • Notes
        • Preliminary Work
          • Notes
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing A-Pillar
        • Preparing A-Pillar
        • Preparing Connection Points On The Body
        • Installing A-Pillar
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 511955 Replacing Cowl Panel
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Cowl Panel
        • Preparing Cowl Panel
        • Preparing Body Connection Areas
          • Preparing connection areas of the body
        • Installing Cowl Panel
        • Subsequent Work
          • Subsequent work for body repairs (without straightening system)
      • WM, 514255 Replacing B-Pillar Reinforcement
        • Notes
        • Preliminary Work
          • Notes
          • Preliminary work for body repairs (without straightening system)
        • Safety Instructions And Information On Quality
        • General Warning Notes
          • Safety instructions for body repairs
        • Tools And Materials
        • Removing B-Pillar Reinforcement
        • Preparing B-Pillar Reinforcement For Installation
        • Preparing Connection Areas For Installing B-Pillar Reinforcement
        • Installing B-Pillar Reinforcement
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 514555 Replacing Outer Side Member (Front Section)
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Outer Side Member (Front Section)
        • Preparing Outer Side Member (Front Section) For Installation
        • Preparing Connection Areas Of The Body For Installation
        • Installing Outer Side Member (Front Section)
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 516555 Replacing Front Cross Panel (Front Crash Support)
        • Notes
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Removing Front Cross Panel (Front Crash Support)
        • Preparing Front Cross Panel (Front Crash Support) For Installation
        • Preparing Connection Areas Of The Body For Installing The Front Cross Panel (Front Crash Support)
        • Installing Front Cross Panel (Front Crash Support)
        • Subsequent Work
          • Subsequent work for body repairs (without straightening system)
      • WM, 516819 Removing And Installing Dashboard Bracket
        • Notes
        • Component Information
          • Installation position of dashboard bracket
        • Preliminary Work
        • Removing And Installing Dashboard Bracket
        • Replacing Holder For Dashboard Bracket
        • Subsequent Work
      • WM, 518941 Threaded Bushes
        • Notes
        • Information
          • Overview of repair areas
        • Installing Repair Threaded Bush
          • Repairing (luggage compartment) cross member thread
          • Repairing spring strut mount thread
          • Thread on engine mount
          • Thread on rear side member
          • Thread on rear side member (impact absorber mount)
          • Thread on threaded joint for roll-over bar
          • Thread on rear spring strut mount
      • WM, 519419 Removing And Installing Cover For Rear Underbody
        • Notes
        • Component Information
          • Installation position of rear underbody cover
        • Preliminary Work
        • Removing Cover For Rear Underbody
        • Installing Cover For Rear Underbody
        • Subsequent Work
      • WM, 511023 Installing (Front) Roll-Over Bar Reinforcement
        • Notes
        • Safety And Quality Instructions
        • Tools And Materials
        • Component Information
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Preparing Connection Areas Of Body For Installing (Front) Roll-Over Bar Reinforcement
        • Preparing (Front) Roll-Over Bar Reinforcement For Installation
        • Installing (Front) Roll-Over Bar Reinforcement
        • Installing (Front) Roll-Over Bar Reinforcement At The Bottom
        • Subsequent Work
          • Subsequent work for body repairs
      • WM, 511023 INSTALLING (REAR) ROLL-OVER BAR REINFORCEMENt
        • Notes
        • Safety And Quality Instructions
        • Tools And Materials
        • Component Information
          • Installation position
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Preparing Connection Areas Of Body For Installing (Rear) Roll-Over Bar Reinforcement
        • Preparing (Rear) Roll-Over Bar Reinforcement For Installation
        • Installing (Rear) Roll-Over Bar Reinforcement
        • Subsequent Work
          • Subsequent work for body repairs
      • WM, 519219 Removing And Installing Front Cover (Fin)
        • Notes
        • Removing Front Cover (Fin)
        • Installing Front Cover (Fin)
      • WM, 51922327 Installing Front Cover (Fin)
        • Notes
        • Installing Front Cover (Fin)
          • Installing fastening parts for front cover (fin)
    • 53 - Body Rear
      • WM, 530255 Replacing Rear End
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (with straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear End
          • Preparing rear end for installation
        • Preparing Connection Areas Of The Body For Installation
          • Installing rear end
        • Subsequent Work
          • Subsequent work for body repairs (with straightening system)
      • WM, 530555 Replacing Rear Closing Panel
        • Notes
        • Preliminary Work
          • Safety and quality instructions
            • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Closing Panel
        • Preparing Rear Closing Panel For Installation
          • Preparing connection areas of body for installing closing panel
        • Installing Rear Closing Panel
      • WM, 531355 Replacing Lower Corner Part
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety Instructions And Information On Quality
          • Tools and materials
        • Removing Lower Corner Plate
          • Preparing connection areas for installation
        • Preparing Lower Corner Plate For Installation
        • Installing Lower Corner Plate
      • WM, 534755 Replacing Closing Element For Longitudinal Member
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary work for body repairs (with straightening system)
        • Information
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Closing Element For Longitudinal Member
          • Preparing connection areas of body for installing closing element for longitudinal member
        • Preparing Closing Element For Longitudinal Member For Installation
          • Installing closing element for longitudinal member
        • Subsequent Work
          • Subsequent work for body repairs (with straightening system)
      • WM, 534855 Replacing Rear Side Member
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (with straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Side Member
        • Preparing Rear Side Member For Installation
          • Preparing connection areas of body for installing rear side member
        • Installing Rear Side Member
          • Subsequent work
            • Subsequent work
      • WM, 535555 Replacing Side Panel
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • General warning notes
            • Safety instructions for body repairs
        • Tools And Materials
        • Removing Side Panel
        • Preparing Side Panel For Installation
        • Preparing Connection Areas Of Body For Installing Rear Side Panel
      • WM, 536855 Replacing Rear Wheel Housing
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary work for body repairs (with straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Wheel Housing
        • Preparing Rear Wheel Housing For Installation
        • Preparing Connection Areas Of The Body For Installing The Rear Wheel Housing
        • Installing Rear Wheel Housing
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (with straightening system)
      • WM, 536919 Removing And Installing Rear Wheel Housing Liner
        • Component Information
          • Installation position of rear whet l housing liner
        • Preliminary Work
          • Notes
          • Removing and installing rear wheel housing liner
            • Subsequent work
      • WM, 532155 Replacing Rear FLOORPAN
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Boot Floor Plate
        • Preparing Rear Boot Floor Plate For Installation
          • Preparing rear trunk floor panel for installation
        • Preparing Connection Areas Of The Body For Installing Rear Trunk Floor Panel
          • Preparing connection areas of body for installing rear trunk floor panel
        • Installing Rear Boot Floor Plate
          • Installing rear trunk floor panel
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 536155 Replacing Inner Side Section
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Inner Side Section
        • Preparing Inner Side Section For Installation
        • Preparing Body Connection Areas
          • Preparing connection areas of the body
          • Installing inner side section
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
    • 55 - Lids, Flaps
      • WM, 551319 Removing And Installing Servo Motor For Lid Opener
        • Preliminary Work
        • Removing And Installing Servo Motor For Lid Opener
        • Subsequent Work
      • WM, 552215 Adjusting Front Lid
        • Notes
        • Checking Gap Dimensions Of Front Lid
        • Adjusting Front Lid
      • WM, 552219 Removing And Installing Front Lid
        • Preliminary Work
        • Removing And Installing Front Lid
          • Subsequent work
      • WM, 552237 Disassembling And Assembling Front Lid
        • Preliminary Work
          • Disassembling front lid
        • Assembling Front Lid
      • WM, 552319 Removing And Installing Proximity Sensor For Front Lid
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing Proximity Sensor For Front Lid
        • Installing Proximity Sensor For Front Lid
        • Subsequent Work
      • WM, 553119 Removing And Installing Front Pneumatic Spring
        • Removing And Installing Front Pneumatic Spring
          • Removing and installing front pneumatic spring on the lid
      • WM, 553319 Removing And Installing Front Lid Seal
        • Removing Front Lid Seal
      • WM, 553719 Removing And Installing Filler Flap
        • Preliminary Work
          • Removing filler flap
          • Installing filler flap
          • Subsequent work
      • WM, 553819 Removing And Installing Switching Element For Filler Flap
        • Preliminary Work
          • Removing switching element for filler flap
          • Installing switching element for filler flap
      • WM, 555719 Removing And Installing Rear Lid Release
        • Preliminary Work
          • Removing and installing rear lid release
            • Subsequent work
      • WM, 555919 Removing And Installing Rear Wall Cover
        • Preliminary Work
          • Notes
          • Component information
          • Removing and installing rear wall cover
          • Subsequent work
      • WM, 556119 Removing And Installing Servo Motor For Emergency Release
        • Preliminary Work
        • Removing And Installing Servo Motor For Emergency Release
        • Subsequent Work
      • WM, 557819 Removing And Installing Engine Compartment Lid
        • Preliminary Work
          • Removing and installing engine compartment lid
            • Subsequent work
      • WM, 558619 Removing And Installing Lower Part Of Rear Lid Lock
        • Notes
        • Preliminary Work
          • Removing and installing lower part of rear lid lock
          • Subsequent work
      • WM, 558719 Removing And Installing Upper Part Of Rear Lid Lock
        • Preliminary Work
      • WM, 559019 Removing And Installing Rear Lid
        • Preliminary Work
          • Removing and installing rear lid
            • Subsequent work
      • WM, 559037 Disassembling And Assembling Rear Lid
        • Preliminary Work
        • Disassembling And Assembling Rear Lid
          • Subsequent work
      • WM, 559119 Removing And Installing Rear Lid Hinge
        • Notes
        • Preliminary Work
          • Removing and installing rear lid hinge
          • Subsequent work
      • WM, 559219 Removing And Installing Proximity Sensor For Rear Lid
        • Preliminary Work
        • Removing Proximity Sensor For Rear Lid
        • Installing Proximity Sensor For Rear Lid
        • Subsequent Work
      • WM, 559319 Removing And Installing Rear Pneumatic Spring
        • Removing And Installing Rear Pneumatic Spring
        • Function Test
      • WM, 551019 Removing And Installing Release For Front Lid
        • Preliminary Work
          • Notes
          • Removing and installing release for front lid
          • Subsequent work
      • WM, 551719 Removing And Installing Lower Part Of Front Lid Lock
        • Notes
        • Component Information
          • Installation position of lower part of front lock
        • Preliminary Work
        • Removing Lower Part Of Front Lid Lock
        • Installing Lower Part Of Front Lid Lock
        • Subsequent Work
      • WM, 551819 Removing And Installing Upper Part Of Front Lid Lock
        • Notes
        • Removing And Installing Upper Part Of Front Lid Lock
        • Checking Upper Part Of Front Lid Lock
          • Checking position of upper part of front lid lock
          • Checking lid function
      • WM, 552519 Removing And Installing Front Lid Hinge
        • Notes
        • Preliminary Work
        • Removing And Installing Front Lid Hinge
        • Subsequent Work
      • WM, 556219 Removing And Installing Front Emergency Release
        • Removing And Installing Front Emergency Release
        • Disassembling Emergency Release
        • Checking Front Emergency Release
      • WM, 556319 Removing And Installing Rear Emergency Release
        • Removing And Installing Rear Emergency Release
        • Checking Rear Emergency Release
      • WM, 558319 Removing And Installing Rear Lid Release Cable
        • Preliminary Work
        • Removing And Installing Rear Lid Release Cable
        • Subsequent Work
      • WM, 559015 Adjusting Rear Lid
        • Notes
        • Checking Gap Dimensions Of Rear Lid
        • Preliminary Work
        • Adjusting Rear Lid
          • Adjusting rear lid in x and y direction
          • Adjusting lid in z direction
        • Subsequent Work
      • WM, 559419 Removing And Installing Rear Lid Seal
        • Removing Rear Lid Seal
        • Installing Rear Lid Seal
    • 55 - Lids, Flaps -- 982 - BOXSTER/CAYMAN
      • WM, 551019 Removing And Installing Release For Front Lid
        • Preliminary Work
        • Removing And Installing Release For Front Lid
        • Subsequent Work
      • WM, 551319 Removing And Installing Servo Motor For Lid Opener
        • Preliminary Work
        • Removing And Installing Servo Motor For Lid Opener
        • Subsequent Work
      • WM, 551719 Removing And Installing Lower Part Of Front Lid Lock
        • Technical Values
        • Component Information
          • Installation Position Of Lower Part Of Front Lock
        • Preliminary Work
        • Removing Lower Part Of Front Lid Lock
        • Installing Lower Part Of Front Lid Lock
        • Subsequent Work
      • WM, 551819 Removing And Installing Upper Part Of Front Lid Lock
        • Technical Values
        • Removing And Installing Upper Part Of Front Lid Lock
        • Checking Upper Part Of Front Lid Lock
          • Checking Position Of Upper Part Of Front Lid Lock
        • Checking Lid Function
      • WM, 552215 Adjusting Front Lid
        • Tools
        • Technical Values
        • Checking Gap Dimensions Of Front Lid
        • Adjusting Front Lid
      • WM, 552219 Removing And Installing Front Lid
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Lid
        • Subsequent Work
      • WM, 552237 Disassembling And Assembling Front Lid
        • Preliminary Work
        • Disassembling Front Lid
        • Assembling Front Lid
        • Subsequent Work
      • WM, 552319 Removing And Installing Proximity Sensor For Front Lid
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Proximity Sensor For Front Lid
        • Installing Proximity Sensor For Front Lid
        • Subsequent Work
      • WM, 552519 Removing And Installing Front Lid Hinge
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Lid Hinge
        • Subsequent Work
      • WM, 553119 Removing And Installing Front Pneumatic Spring
        • Removing And Installing Front Pneumatic Spring
          • Removing And Installing Front Pneumatic Spring On The Lid
          • Removing And Installing Front Pneumatic Spring On The Body
        • Function Test On Pneumatic Spring
      • WM, 553319 Removing And Installing Front Lid Seal
        • Removing Front Lid Seal
        • Installing Front Lid Seal
      • WM, 553719 Removing And Installing Filler Flap
        • Preliminary Work
        • Removing Filler Flap
        • Installing Filler Flap
        • Subsequent Work
      • WM, 553819 Removing And Installing Switching Element For Filler Flap
        • Preliminary Work
        • Removing Switching Element For Filler Flap
        • Installing Switching Element For Filler Flap
        • Subsequent Work
      • WM, 555719 Removing And Installing Rear Lid Release
        • Preliminary Work
        • Removing And Installing Rear Lid Release
        • Subsequent Work
      • WM, 555919 Removing And Installing Rear Wall Flap
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing And Installing Rear Wall Flap
        • Subsequent Work
      • WM, 556119 Removing And Installing Servo Motor For Emergency Release
        • Preliminary Work
        • Removing And Installing Servo Motor For Emergency Release
        • Subsequent Work
      • WM, 556219 Removing And Installing Front Emergency Release
        • Removing And Installing Front Emergency Release
        • Disassembling Emergency Release
        • Checking Front Emergency Release
      • WM, 556319 Removing And Installing Rear Emergency Release
        • Removing And Installing Rear Emergency Release
        • Checking Rear Emergency Release
      • WM, 557819 Removing And Installing Engine Compartment Lid
        • Technical Values
        • Preliminary Work
        • Removing And Installing Engine Compartment Lid
        • Subsequent Work
      • WM, 558619 Removing And Installing Lower Part Of Rear Lid Lock
        • Technical Values
        • Removing And Installing Lower Part Of Rear Lid Lock
        • Disconnecting Emergency Release
        • Subsequent Work
      • WM, 558719 Removing And Installing Upper Part Of Rear Lid Lock
        • Technical Values
        • Removing And Installing Upper Part Of Rear Lid Lock
        • Checking Upper Part Of Rear Lid Lock
          • Checking Position Of Upper Part Of Rear Lid Lock
      • WM, 559015 Adjusting Rear Lid
        • Tools
        • Technical Values
        • Checking Gap Dimensions Of Rear Lid
        • Adjusting Rear Lid
          • Adjusting Rear Lid In X And Y Direction
          • Adjusting Rear Lid In Z Direction
      • WM, 559019 Removing And Installing Rear Lid
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear Lid
        • Subsequent Work
      • WM, 559037 Disassembling And Assembling Rear Lid
        • Preliminary Work
        • Disassembling And Assembling Rear Lid
        • Subsequent Work
      • WM, 559119 Removing And Installing Rear Lid Hinge
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear Lid Hinge
        • Subsequent Work
      • WM, 559219 Removing And Installing Proximity Sensor For Rear Lid
        • Preliminary Work
        • Removing Proximity Sensor For Rear Lid
        • Installing Proximity Sensor For Rear Lid
        • Subsequent Work
      • WM, 559319 Removing And Installing Rear Pneumatic Spring
        • Removing And Installing Rear Pneumatic Spring
        • Function Test
      • WM, 559419 Removing And Installing Rear Lid Seal
        • Removing Rear Lid Seal
        • Installing Rear Lid Seal
    • 5X - Body General
      • WM, 5X00IN01 Safety Instructions
        • Safety Instructions For Raising Vehicles
          • Danger of injury when raising vehicles
          • Damage when raising vehicles
        • General Warning Notes
          • Danger of injury while welding
          • Safety instructions for dealing with flying sparks during grinding and welding work
          • Safety instructions for grinding work
          • Safety instructions for fuel tank
          • Safety instructions for air conditioning
        • Safety Instructions For Adhesive Bonding
          • Danger of poisoning and injury when using adhesive
          • Safety instructions for Teromix-6700 two-component adhesive
        • Safety Instructions For Assembly Work
          • Safety instructions for sharp-edged body and unit parts
          • Safety instructions for airbag system
        • Safety Instructions For Corrosion Protection
          • Safety instructions for stopper location plan (body)
      • WM, 5X00IN02 Protection For Electric Components During Body Repairs
        • Information On Electronic Control Units
          • Notes
          • Protection against overvoltage when performing welding work
          • Replacing control units
      • WM, 5X00IN03 Corrosion Protection Measures During Repair Work
        • Measures For Maintaining Long-Term Body Protection
        • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
          • Prerequisite for maintaining the long-life guarantee
            • Porsche long-life guarantee conditions
      • WM, 5X00IN04 Body Parts Of Various Sheet-Steel Strengths
        • List Of Materials
        • High-Strength Steel
        • Very-High-Strength Steel
        • Ultra-High-Strength Steel
        • Separation Points
        • Welding Work
      • WM, 5X00IN07 General Information And Notes On Quality
        • Notes
        • Battery Trickle Charge
          • Battery trickle charging
        • Information On Control Units
          • Information on removing and installing control units
          • Protection against overvoltage when performing welding work
          • Information for replacing control units
        • Information On Maintaining Long-Life Corrosion Protection Or The Long-Life Guarantee
          • Information on maintaining long-life corrosion protection
          • Information on maintaining the long-life guarantee
      • WM, 5X00IN08 Bonding Log
      • WM, 5X00IN10 Welding Aluminium
        • Notes
        • Welding Aluminium
      • WM, 5X00IN11 Stud Welding
        • Notes
        • Preparing For Stud Welding
        • Welding Parameters
        • Welding Studs
      • WM, 5X00IN20 Working With Body Structural Foam
        • Notes
        • General Information
          • Version
          • Safety data sheet
          • Shelf life
          • Disposal
          • Bonding log
        • Structural Foam In Body Building
        • Working With Body Structural Foam
          • General information
          • Preparing bonding surfaces
            • Initial cleaning
            • Cleaning
          • Processing conditions
            • Notes
            • Joining process
          • Hardening
          • Assembly strength
          • Endurance strength
          • Corrosion protection
          • Work sample
      • WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00
        • Notes
        • General Information
          • Version
          • Safety data sheet
          • Shelf life
          • Disposal
          • Bonding log
        • Information On Structural Bonding In Vehicle Manufacturing
          • General
          • Combined joining processes
          • Separating body components
          • Welding in body components
        • Working With Body Structural Adhesive Pah.071.781.00
          • General information
          • Preparing bonding surfaces
            • Initial cleaning
            • Cleaning
            • Sand/grind until bare
          • Processing conditions
          • Joining process
          • Hardening
          • Assembly strength
          • Endurance strength
          • Corrosion protection
          • Work sample
      • WM, 5X00IN22 Working With Body Foam Filler
        • Notes
        • General Information
          • Version
          • Safety data sheet
          • Shelf life
          • Disposal
          • Bonding log
        • Foam Filler In Body Building
        • Working With Body Foam Filler
          • General information
          • Preparing bonding surfaces
            • Initial cleaning
            • Cleaning
          • Processing conditions
          • Joining process
          • Hardening
          • Subsequent work
          • Assembly and endurance strength
      • WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints
        • Notes
        • General Information
        • Loosening Joint
          • Punch rivets
          • Pressing out punch rivets
          • Punch and bottom die pairs
          • Pulling punch rivets
          • Penetrated joints
          • Loosening penetrated joints
        • Making Joint
          • Setting blind rivets
          • Setting flow-form rivets
      • WM, 5X00IN24 Setting Self-Tapping Screws
        • Notes
        • General Information
        • Setting Self-Tapping Screws
      • WM, 5X00IN25 Making Ground Connections
        • Notes
        • Making Ground Connection Using A Through Bolt
        • Making Ground Connection Using A Rivet Nut
      • WM, 5X00IN26 Replacing Coarse Threaded Bolts
        • Notes
        • Replacing Coarse Threaded Bolts
        • Subsequent Work
      • WM, 5X00IN33 Thread Repairs For Threaded Bushes With Collar
        • Thread Repairs For Threaded Bushes With Collar
      • WM, 5X00IN34 Thread Repairs For Threaded Bushes Without Collar
        • Notes
        • Repair Procedure For Threaded Bush Without Collar
      • WM, 5X00IN61 Work Sequence For Accident Repairs
        • Work Sequence For Accident Repairs
          • Procedure for accident repairs
          • Repairs
          • Replacement
      • WM, 5X00IN62 Procedure For Damage Diagnosis
        • Notes
        • Procedure For Damage Diagnosis
        • Identifiable Deformations On The Body Structure
        • No Identifiable Deformations On The Body Structure
      • WM, 5X00IN83 Connecting Elements For Body Repairs
        • Notes
        • Connecting Elements For Body Repairs
          • Rivets
          • Special elements
          • Adhesive and filler
      • WM, 5X00IN Technical Values
        • Notes
        • Technical Values
          • Underbody panelling
          • Working on rear lid
          • Technical values for door arrester
          • B-pillar seal
          • Technical values - front wing
      • WM, 5X00IN Cavity Preservation
        • Add-On Parts
        • Unpainted BODYSHELL
          • Notes
          • Bottom Of Front Of Vehicle
      • WM, 5X00IN Data Plates
        • Diagram: Data Plates
          • Front and right side of vehicle
      • WM, 5X00IN Underbody Protection
        • Notes
        • Tools And Materials
          • Tools
        • Diagram: Underbody Protection
          • Overview diagram - lower side member and floor
          • Overview diagram - lower rear end
      • WM, 5X00IN Information On Aluminium Repairs
        • Notes
        • List Of Materials
        • Damage Diagnosis
          • Repairs
            • Removing dents on accessories
              • Notes
              • If the part cracks during dent removal, the part must be replaced!
              • Front of vehicle
              • Centre of vehicle
              • Rear of vehicle
              • Accessories
        • Occupational Safety
          • Corrosion protection measures
      • WM, 5X00IN Gap Dimension
        • Notes
        • Lighting
          • Gap dimensions of main headlights
        • Windows
          • Front
            • Gap dimensions of front wing
        • Gap Dimensions - Side
          • Gap dimensions of front door
        • Front
          • Rear
            • Gap dimensions of rear lid
          • Gap dimensions of rear spoiler
      • WM, 5X00IN Exterior Colours
        • Exterior Colours - Solid Paint System
        • Exterior Colours - Metallic Paint System
      • WM, 5X00IN Vehicle Identification Number
        • Notes
        • Re-Imprinting New Vehicle Identification Number
          • Information
          • Spacer for replacing the vehicle identification number
        • Encoding The Vehicle Ident. No
          • Encoding vehicle identification number
          • Model year allocation
          • Allocation of position 8 - Model type
          • Allocation of production month
          • Allocation of production year
      • WM, 5X00IN Diagram: Stopper Plan
        • Diagram: Stopper Plan
          • A-pillar - Cabriolet
          • A-pillar - Coupe
          • Side panel and door sill
          • Top of floor
          • Lower side member and bottom of floor
          • Lower rear end
          • Rear end
          • Upper body front section
          • Top side of body front section
          • Firewall on left-hand drive vehicle
          • Firewall on right-hand drive vehicle
          • Bottom of floor
          • Lower body front section
      • WM, 5X00IN Seam Seal
        • Notes
        • Add-On Parts
          • Instructions for sealing seams
          • Door
        • Rear Lid
        • Unpainted BODYSHELL
          • Upper body front section
          • Upper body front section, front
          • Upper body front section (plenum panel)
          • Body front section and inner A-pillar
          • Body front section and outer A-pillar
          • Side of body front section
          • Inner body front section and top of floor
          • Bulkhead and centre floor
          • Wheel housing and upper rear side section
          • Lower body front section
          • Lower side member and bottom of floor
          • Lower engine compartment bulkhead
          • Upper rear end
          • Lower rear end
          • Lower side of rear end
          • Upper side of rear end
      • WM, 5X00IN Body Parts Of Various Sheet-Steel Strengths
        • List Of Materials
        • High-Strength Steel
        • Very-High-Strength Steel
        • Ultra-High-Strength Steel
        • Separation Points
        • Welding Work
    • 63 - Bumpers
      • WM, 631019 Removing And Installing Front Bumper
        • Notes
        • Component Information
          • Installation position of front bumper
        • Preliminary Work
        • Removing And Installing Front Bumper
      • WM, 631519 Removing And Installing Front Apron
        • Notes
        • Preliminary Work
        • Removing And Installing Front Apron
        • Subsequent Work
      • WM, 635019 Removing And Installing Rear Bumper
        • PRELIMINARY work
          • Removing rear bumper
            • Installing rear bumper
              • Subsequent work
      • WM, 635519 Removing And Installing Rear Apron
        • Preliminary Work
        • Removing Rear Apron
        • Installing Rear Apron
          • Subsequent work
      • WM, 6355IN Instructions For Painting Rear Apron (Vehicles With Lane Change Assist)
        • Notes
        • Instructions For Painting Rear Apron (Vehicles With Lane Change Assist)
      • WM, 631555 Replacing Front Apron
        • Notes
        • Preliminary Work
        • Disassembling Front Apron
        • Assembly Instructions For Retainer Plate For Headlight-Washer Spray Nozzle
        • Assembling Front Apron
        • Subsequent Work
      • WM, 631719 Removing And Installing Retaining Strip For Front Apron
        • Notes
        • Preliminary Work
        • Removing And Installing Retaining Strip For Front Apron
          • Removing and installing front retaining strip for front apron
          • Removing and installing side retaining strip for front apron
        • Subsequent Work
      • WM, 635555 Replacing Rear Apron
        • Preliminary Work
        • Disassembling Rear Apron
        • Assembling Rear Apron
        • Subsequent Work
      • WM, 635619 Removing And Installing Rear Panel (Logo)
        • Notes
        • Preliminary Work
        • Removing Rear Panel (Logo)
        • Installing Rear Panel (Logo)
        • Subsequent Work
      • WM, 635719 Removing And Installing Rear Retaining Strip
        • Notes
        • Preliminary Work
        • Removing Rear Retaining Strip
        • Installing Rear Retaining Strip
        • Subsequent Work
      • WM, 636819 Removing And Installing Rear Skirt
        • Preliminary Work
        • Removing Rear Skirt
        • Installing Rear Skirt
        • Subsequent Work
    • 63 - Bumpers -- 982 - BOXSTER/CAYMAN
      • WM, 631019 Removing And Installing Front Bumper
        • Technical Values
        • Component Information
          • Installation position of front bumper
        • Preliminary Work
        • Removing And Installing Front Bumper
        • Subsequent Work
      • WM, 631519 Removing And Installing Front Apron
        • Tools
        • Preliminary Work
        • Removing And Installing Front Apron
        • Subsequent Work
      • WM, 631555 Replacing Front Apron
        • Technical Values
        • Preliminary Work
        • Disassembling Front Apron
        • Assembly Instructions For Retainer Plate For Headlight-Washer Spray Nozzle
        • Assembling Front Apron
        • Subsequent Work
      • WM, 631719 Removing And Installing Retaining Strip For Front Apron
        • Technical Values
        • Preliminary Work
        • Removing And Installing Retaining Strip For Front Apron
          • Removing and installing front retaining strip for front apron
          • Removing and installing side retaining strip for front apron
        • Subsequent Work
      • WM, 635019 Removing And Installing Rear Bumper
        • Technical Values
        • Preliminary Work
        • Removing Rear Bumper
        • Installing Rear Bumper
        • Subsequent Work
      • WM, 635519 Removing And Installing Rear Apron
        • Technical Values
        • Preliminary Work
        • Removing Rear Apron
        • Installing Rear Apron
        • Subsequent Work
      • WM, 635555 Replacing Rear Apron
        • Preliminary Work
        • Disassembling Rear Apron
        • Assembling Rear Apron
        • Subsequent Work
      • WM, 6355IN Instructions For Painting Rear Apron (Vehicles With Lane Change Assist)
        • Technical Values
        • Instructions For Painting Rear Apron (Vehicles With Lane Change Assist)
      • WM, 635619 Removing And Installing Rear Panel (Logo)
        • Technical Values
        • Preliminary Work
        • Removing Rear Panel (Logo)
        • Installing Rear Panel (Logo)
        • Subsequent Work
      • WM, 635719 Removing And Installing Rear Retaining Strip
        • Technical Values
        • Preliminary Work
        • Removing Rear Retaining Strip
        • Installing Rear Retaining Strip
        • Subsequent Work
      • WM, 636819 Removing And Installing Rear Skirt
        • Preliminary Work
        • Removing Rear Skirt
        • Installing Rear Skirt
        • Subsequent Work
    • 66 Exterior Equipment -- 982 - BOXSTER/CAYMAN
      • WM, 660319 Removing And Installing Front Spoiler
        • Component Information
          • Installation position of front spoiler
        • Preliminary Work
        • Removing And Installing Front Spoiler
        • Subsequent Work
      • WM, 660419 Removing And Installing Front Air Grille
        • Component Information
          • Preliminary work
        • Removing And Installing Front Air Grille
        • Subsequent Work
      • WM, 660519 Removing And Installing Radiator Grille
        • Preliminary Work
        • Removing And Installing Radiator Grille
        • Subsequent Work
      • WM, 660719 Removing And Installing Front Logo
        • Removing Front Logo
        • Installing Front Logo
      • WM, 661019 Removing And Installing Front Apron
        • Removing And Installing Front Apron
      • WM, 663119 Removing And Installing Door Entry Guard
        • Component Information
          • Installation position of sill cover
        • Preliminary Work
        • Removing And Installing Door Entry Guard
        • Subsequent Work
      • WM, 665055 Replacing Rear Logo
        • Tools
        • Technical Values
        • Removing Rear Logo
        • Installing Rear Logo
          • Installing logo rear
      • WM, 6650IN Using Logo Template With Interchangeable Insert
        • Positioning Logo With Logo Template
      • WM, 665619 Removing And Installing Side Air Intake Frame
        • Preliminary Work
        • Removing And Installing Side Air Intake Frame
        • Subsequent Work
      • WM, 665619 Removing And Installing Air Grille (Side Air Intake Cover)
        • Component Information
          • Installation position of air grille (side air intake cover)
        • Removing And Installing Air Grille (Side Air Intake Cover)
      • WM, 665819 Removing And Installing Rear Spoiler
        • Technical Values
        • Removing Rear Spoiler
        • Installing Rear Spoiler
      • WM, 667155 Replacing Rear Spoiler Motor
        • Preliminary Work
        • Removing Rear Spoiler Motor
        • Installing Rear Spoiler Motor
        • Subsequent Work
      • WM, 667219 Removing And Installing Spoiler Drive
        • Technical Values
        • Preliminary Work
        • Removing Spoiler Drive
        • Installing Spoiler Drive
        • Subsequent Work
      • WM, 667819 Removing And Installing Mirror Glass
        • Removing Mirror Glass
        • Installing Mirror Glass
      • WM, 667919 Removing And Installing Rear-View Mirror Housing
        • Technical Values
        • Preliminary Work
          • Preliminary work for removing and installing upper part of housing
          • Preliminary work for removing and installing lower part of housing and base housing
        • Removing Rear-View Mirror Housing
          • Removing upper part of rear-view mirror housing
          • Removing base housing
          • Removing lower part of rear-view mirror housing
        • Installing Rear-View Mirror Housing
          • Installing lower part of rear-view mirror housing
          • Installing base housing
        • Subsequent Work
          • Subsequent work for removing and installing lower part of housing and base housing
          • Subsequent work for removing and installing upper part of housing
      • WM, 668219 Removing And Installing Mirror Adjusting Motor
        • Preliminary Work
        • Removing Mirror Adjusting Motor
        • Installing Mirror Adjusting Motor
        • Subsequent Work
      • WM, 668319 Removing And Installing Number Plate Trim
        • Removing And Installing Number Plate Trim
          • Removing number plate cover
          • Installing number plate cover
          • Installing number plate trim (number plate)
      • WM, 668919 Removing And Installing Rear-View Mirror
        • Technical Values
        • Preliminary Work
        • Removing Rear-View Mirror
        • Installing Rear-View Mirror
        • Subsequent Work
  • Exterior/Interior Trim
    • 68 Interior Equipment -- 982 - BOXSTER/CAYMAN
      • WM, 680519 Removing And Installing Inner Door Sill Trim
        • Removing And Installing Inner Door Sill Trim
      • WM, 680719 Removing And Installing Cover Strip
        • Removing Cover Strip
        • Installing Cover Strip
      • WM, 681119 Removing And Installing Glove Compartment Lock
        • Removing And Installing Glove Compartment Lock
      • WM, 681219 Removing And Installing Glove Compartment Lid
        • Preliminary Work
        • Removing And Installing Glove Compartment Lid
        • Subsequent Work
      • WM, 681419 Removing And Installing Centre Console Trim
        • Removing And Installing Centre Console Trim
      • WM, 681519 Removing And Installing Glove Box
        • Technical Values
        • Preliminary Work
        • Removing And Installing Glove Box
        • Subsequent Work
      • WM, 681619 Removing And Installing Storage Compartment
        • Technical Values
        • Component Information
          • Information
        • Preliminary Work For Front Storage Compartment
        • Preliminary Work For Rear Storage Compartment
        • Removing Storage Compartment
          • Removing front storage compartment
          • Removing rear storage compartment
        • Installing Storage Compartment
          • Installing front storage compartment
          • Installing rear storage compartment
        • Subsequent Work
          • Subsequent work for front storage compartment
          • Subsequent work for rear storage compartment
      • WM, 681719 Removing And Installing Centre Console
        • Technical Values
        • Preliminary Work
        • Removing And Installing Centre Console
        • Subsequent Work
      • WM, 681719 Removing And Installing Upper Part Of Centre Console
        • Technical Values
        • Preliminary Work
          • Notes
          • Removing upper part of centre console
        • Installing Upper Part Of Centre Console
        • Subsequent Work
      • WM, 681737 Disassembling And Assembling Centre Console
        • Preliminary Work
        • Disassembling And Assembling Centre Console
        • Subsequent Work
      • WM, 681919 Removing And Installing Centre Console Cover
        • Preliminary Work
        • Removing And Installing Centre Console Cover
        • Removing And Installing Selector-Lever Cover
        • Subsequent Work
      • WM, 682019 Removing And Installing Front Ashtray
        • Component Information
          • Information
        • Preliminary Work
        • Removing And Installing Front Ashtray
        • Subsequent Work
      • WM, 682319 Removing And Installing Sun Visor
        • Technical Values
        • Removing And Installing Sun Visor
          • Removing and installing sun visors
      • WM, 682337 Disassembling And Assembling Sun Visor
        • Preliminary Work
        • Disassembling Sun Visor
        • Assembling Sun Visor
        • Subsequent Work
      • WM, 682719 Removing And Installing Interior Rear-View Mirror
        • Preliminary Work
        • Removing And Installing Interior Rear-View Mirror
        • Subsequent Work
      • WM, 683019 Removing And Installing CUPHOLDER
        • Component Information
          • Installation position of cupholder
        • Preliminary Work
        • Removing And Installing CUPHOLDER
        • Subsequent Work
      • WM, 684419 Removing And Installing Tunnel Support
        • Technical Values
        • Component Information
          • Installation position of tunnel support
        • Preliminary Work
          • Preliminary work for lower part of tunnel support
          • Preliminary work for upper part of tunnel support
        • Removing Tunnel Support
          • Removing lower part of tunnel support
          • Removing upper part of tunnel support
        • Installing Tunnel Support
          • Installing lower part of tunnel support
          • Installing upper part of tunnel support
        • Subsequent Work
          • Subsequent work for lower part of tunnel support
          • Subsequent work for upper part of tunnel support
      • WM, 684719 Removing And Installing Wind Deflector
        • Removing And Installing Wind Deflector
      • WM, 684819 Removing And Installing Cover For Tray
        • Preliminary Work
        • Removing And Installing Cover For Tray
          • Removing and installing upper part of lid for tray
          • Removing and installing lower part of lid for tray
        • Subsequent Work
      • WM, 689319 Removing And Installing Fire Extinguisher
        • Technical Values
        • Component Information
          • Installation position of fire extinguisher
        • Removing Fire Extinguisher
        • Removing Fire Extinguisher Tray
        • Installing Fire Extinguisher
    • 6X Body-Equipment Outside - General -- 982 - BOXSTER/CAYMAN
      • WM, 6X00IN22 Using PORSCHE 2-Component Window Adhesive
        • Tools
        • Technical Values
        • General Information
          • Version reference
          • Safety data sheet
          • Shelf life
          • Disposal
          • Bonding log
        • PORSCHE 2-Component Window Adhesive In Body Building
        • Working With PORSCHE 2-Component Window Adhesive
          • General information
          • Using adhesive set components
          • Application conditions
          • Preparing components
          • Preparing component - component with cut or pre-applied adhesive bead
          • Preparing component - new component without adhesive bead
          • Preparing vehicle flange - vehicle flange with cut adhesive bead
          • Preparing vehicle flange - vehicle flange with repair paint finish without adhesive bead
          • Joining process
          • Hardening
          • Assembly strength
          • Endurance strength
          • Work sample
      • WM, 6X00IN30 Working With Adhesive Tape And Adhesive Pads
        • Technical Values
        • General Information
          • Version
          • Shelf life
          • Disposal
          • Bonding log
        • Adhesive Tape And Adhesive Pads In Body Building
          • Adhesive tape and adhesive pads on the bodywork
        • Working With Adhesive Tape And Adhesive Pads
          • General information
          • Preparing bonding surfaces
            • Initial cleaning
            • Cleaning
          • Processing conditions
          • Joining process
          • Assembly and endurance strength
      • WM, 6X00IN Eliminating Symptoms On Body Exterior - Touching Up Paintwork (Swelling Of Clear Lacquer/SY4315)
        • Tools
        • Technical Values
        • General Information
          • Symptom
          • Cause, affected vehicles, remedial action
            • Cause
          • Tools and materials
          • Touching up paintwork
      • WM, 6X00IN Disposal Of Airbag And Seat-Belt PRETENSIONER Units
        • Tools
        • Disposal Of Airbag And Seat-Belt PRETENSIONER Units
        • Safety Procedures When Igniting Airbag Units
        • Tools And Materials
        • Connecting Ignition Tool
          • Driver's side
          • Passenger's side
          • Side airbag
          • Head airbag
          • Seat-belt pretensioners
          • Ignition module for front lid
          • Knee airbag
          • Pyrotechnical cutoff relay
      • WM, 6X00IN Handling And Replacing Airbag And Seat-Belt PRETENSIONER Units
        • Tools
        • Tools And Materials
          • Materials
        • General Warning Notes
          • General warnings for handling airbag and seat-belt pretensioner units
          • Warnings about assembly and straightening work
        • Information For Handling Airbag And Seat-Belt PRETENSIONER Units
          • Dangers for persons and the environment
          • Protective measures and rules of behaviour
          • Behaviour in cases of malfunction or danger
          • General information
      • WM, 6X00IN Technical Values
        • Technical Values
        • Technical Values - Occupant Protection
          • Passenger's airbag unit
          • Head airbag
          • Airbag sensor
          • Triggering unit for airbag
          • Knee airbag on passenger's side
          • Knee airbag on driver's side
          • Front side airbag
          • Interior equipment
          • Fire extinguisher
          • Roll-over bar
          • Side air intake frame
          • Air grille
          • Door entry guard
          • Bumper, front apron
          • Bumper on rear apron
          • Rear spoiler
          • Spoiler drive
          • Engine compartment cover
        • Technical Values For Glazing, Window Operation
          • Glazing, window control
          • Gap dimensions of door window
          • Gap dimensions of rear side window
          • Technical values for door arrester
          • Technical values for exterior mirrors
          • Rear-view mirror
          • Convertible top/accessories
          • Seal for cowl panel frame
          • Technical values for convertible top/roll-over bar
          • Technical values for tension bow
          • Technical values for roofliner
          • Technical values for convertible top covering
          • Technical values for convertible top linkage
          • Front seat belt
          • Six-point seat belt
          • Technical values for folding sports bucket seat
          • Technical values for supporting plate for headlights
          • Technical values - Rear side window
      • WM, 6X00IN General Information On Removing Car Windows
        • Technical Values
          • Notes
          • Cutting force for removing glass with cutting thread
        • Removing Glass
          • Removing glass with VAS 861 001 A
          • Removing glass with VAS 1474 B
    • 70 Linings, Insulation -- 982 - BOXSTER/CAYMAN
      • WM, 700219 - Removing And Installing Front Trim (Wing Flange)
        • Preliminary Work
        • Removing And Installing Front Trim (Wing Flange)
        • Subsequent Work
      • WM, 700519 - Removing And Installing Front Luggage Compartment Trim Panel
        • Preliminary Work
        • Removing And Installing Front Luggage Compartment Trim Panel
          • Removing And Installing Front Luggage Compartment
        • Subsequent Work
      • WM, 700619 - Removing And Installing Rear Luggage Compartment Trim Panel
        • Preliminary Work
        • Removing And Installing Rear Luggage Compartment Trim Panel
        • Subsequent Work
      • WM, 700819 - Removing And Installing Trim Panel For Convertible Top Compartment/Engine Compartment Lid
        • Preliminary Work
        • Removing And Installing Trim Panel For Convertible Top Compartment/Engine Compartment Trim Panel
        • Subsequent Work
      • WM, 701619 - Removing And Installing Dashboard Trim Panel
        • Component Information
          • Installation Position Of Dashboard Cover
        • Removing And Installing Dashboard Trim Panel
      • WM, 701819 - Removing And Installing Dashboard
        • Technical Values
        • Component Information
          • Installation Position Of Dashboard
        • Preliminary Work
        • Removing Dashboard
        • Installing Dashboard
        • Subsequent Work
      • WM, 701855 - Replacing Dashboard
        • Preliminary Work
        • Replacing Dashboard
        • Subsequent Work
      • WM, 701919 - Removing And Installing Trim Panel Under Dashboard
        • Component Information
          • Installation Position Of Trim Panel Under Dashboard
        • Preliminary Work
        • Removing And Installing Trim Panel Under Dashboard
        • Subsequent Work
      • WM, 702019 - Removing And Installing Cover For Dashboard (Defroster Trim)
        • Preliminary Work
        • Removing And Installing Cover For Dashboard (Defroster Trim)
          • Removing Cover For Dashboard (Defroster Trim)
          • Installing Cover For Dashboard (Defroster Trim)
        • Subsequent Work
      • WM, 702219 - Removing And Installing Cover (Cold Air Bulkhead)
        • Component Information
          • Installation Position Of Cover (Cold Air Bulkhead)
        • Removing And Installing Cover (Cold Air Bulkhead)
      • WM, 702419 - Removing And Installing Front Side-Section Trim Panel
        • Removing And Installing Front Side-Section Trim Panel
      • WM, 703119 - Removing And Installing Trim Panel For Rear Wall
        • Removing And Installing Trim Panel For Rear Wall
      • WM, 703519 - Removing And Installing Footrest
        • Removing And Installing Footrest
      • WM, 703919 - Removing And Installing Cover For Rear Lock Support
        • Removing And Installing Cover For Rear Lock Support
      • WM, 703919 - Removing And Installing Cover For Front Lock Support
        • Preliminary Work
        • Removing And Installing Cover For Front Lock Support
        • Subsequent Work
      • WM, 704119 - Removing And Installing Front Carpet
        • Installation Position
        • Preliminary Work
        • Removing And Installing Front Carpet
        • Subsequent Work
      • WM, 705719 - Removing And Installing A-Pillar Trim Panel
        • Preliminary Work
        • Removing A-Pillar Trim Panel
        • Installing A-Pillar Trim Panel
        • Subsequent Work
      • WM, 705819 - Removing And Installing Dashboard Molding
        • Removing And Installing Dashboard Molding
          • Removing And Installing Dashboard Molding On Driver's Side At The Left
          • Removing And Installing Dashboard Molding On Driver's Side At The Right
          • Removing And Installing Dashboard Molding On Passenger's Side
      • WM, 705919 - Removing And Installing Door Panel
        • Technical Values
        • Preliminary Work
        • Removing Front Door Panel
        • Installing Front Door Panel
        • Subsequent Work
      • WM, 706119 - Removing And Installing Trim For Door Panel
        • Removing Trim For Door Panel
        • Installing Trim For Door Panel
      • WM, 706319 - Removing And Installing Handle
        • Technical Values
        • Preliminary Work
        • Removing Handle
        • Installing Handle
        • Subsequent Work
      • WM, 707519 - Removing And Installing Side Trim Panel
        • Preliminary Work
        • Removing And Installing Side Trim Panel
        • Subsequent Work
      • WM, 708119 - Removing And Installing Trim Panel For Roll-Over Bar
        • Component Information
          • Installation Position Of Trim Panel For Roll-Over Bar
        • Preliminary Work
        • Removing And Installing Trim Panel For Roll-Over Bar
        • Subsequent Work
      • WM, 708319 - Removing And Installing Front Roof Trim Panel
        • Preliminary Work
        • Removing And Installing Front Roof Trim Panel
          • Removing And Installing Front Roof Trim Panel At The Centre
          • Removing And Installing Front Roof Trim Panel At The Sides
        • Subsequent Work
      • WM, 709019 - Removing And Installing Loudspeaker Trim Panel
        • Removing And Installing Loudspeaker Trim Panel
    • 7X Body-Equipment Inside - General -- 982 - BOXSTER/CAYMAN
      • WM, 7X00IN - Technical Values
        • Technical Values
        • 72 - Seat - Frames
          • Front Seat
  • Seats
    • 72 Seat Frames -- 982 - BOXSTER/CAYMAN
      • WM, 720119 - Removing And Installing Folding Sports Bucket Seat
        • Technical Values
        • Preliminary Work
        • Removing And Installing Folding Sports Bucket Seat
        • Subsequent Work
      • WM, 720119 - Removing And Installing Front Seat
        • Technical Values
        • Removing And Installing Front Seat
        • Subsequent Work
      • WM, 720619 - Removing And Installing Air Cushion Switch
        • Component Information
          • Installation Position
        • Removing And Installing Air Cushion Switch
      • WM, 720955 - Replacing Seat Frame
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Seats Without Air Cushions
          • Preliminary Work For Seats With Air Cushions
        • Replacing Seat Frame
          • Removing Pressure Sensor Mat For Occupant Detection
          • Removing Seat Frame
          • Installing Seat Frame
          • Installing Pressure Sensor Mat For Occupant Detection
        • Subsequent Work
          • Subsequent Work For Seats Without Air Cushions
          • Subsequent Work For Seats With Air Cushions
      • WM, 721419 - Removing And Installing Air Cushion For Seat
        • Component Information
          • Installation Position Of Air Cushion For Seat
        • Preliminary Work
        • Removing And Installing Air Cushion For Seat
        • Subsequent Work
      • WM, 721619 - Removing And Installing Trim Panel For Seat
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Trim Panel For Seat
        • Subsequent Work
      • WM, 721719 - Removing And Installing Air Cushion For Backrest (Sports Seat Plus)
        • Technical Values
        • Component Information
          • Installation Position Of Air Cushion For Backrest
        • Preliminary Work
        • Removing Air Cushion For Backrest
        • Installing Air Cushion For Backrest
        • Subsequent Work
      • WM, 721955 - Replacing Backrest Frame (Air-Conditioned Comfort Seat)
        • Technical Values
        • Preliminary Work
        • Disassembling Backrest Frame (Air-Conditioned Comfort Seat)
          • Removing Foam Part
          • Removing Inner Spring On Backrest Frame
          • Removing Backrest Frame
          • Disassembling Backrest Frame
          • Assembling Backrest Frame
        • Subsequent Work
      • WM, 721955 - Replacing Backrest Frame
        • Technical Values
        • Preliminary Work
        • Disassembling Backrest Frame
          • Removing Foam Part
          • Removing Inner Spring On Backrest Frame
          • Disconnecting Wire Harness On Backrest Frame
          • Removing Backrest Frame
          • Assembling Backrest Frame
        • Subsequent Work
      • WM, 722419 - Removing And Installing Cushion Carrier For Front Backrest
        • Component Information
          • Installation Position Of Cushion Carrier For Front Backrest
        • Preliminary Work
        • Removing And Installing Cushion Carrier For Front Backrest
        • Subsequent Work
      • WM, 722419 - Removing And Installing Cushion Carrier For Front Backrest (Sports Seat Plus)
        • Component Information
          • Installation Position Of Cushion Carrier For Front Backrest
        • Preliminary Work
        • Removing And Installing Cushion Carrier For Front Backrest (Sports Seat Plus)
        • Subsequent Work
      • WM, 722519 - Removing And Installing BOWDEN Cable For Backrest Release
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing BOWDEN Cable For Backrest Release
        • Installing BOWDEN Cable For Backrest Release
        • Subsequent Work
      • WM, 722655 - Replacing Backrest Cover
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Backrest Cover
          • Removing Outer Backrest Cover
          • Removing Inner Backrest Cover
        • Installing Backrest Cover
          • Installing Inner Backrest Cover
          • Installing Outer Backrest Cover
        • Subsequent Work
      • WM, 722955 - Replacing Retainer Plate For Seat-Adjustment Motor
        • Technical Values
        • Preliminary Work
        • Removing And Installing Retainer Plate For Seat-Adjustment Motor
        • Subsequent Work
      • WM, 723155 - Replacing Control Button For Backrest Adjustment
        • Replacing Control Button For Backrest Adjustment
      • WM, 723319 - Removing And Installing Control Valve For Lumbar Support Adjustment
        • Component Information
          • Installation Position Of Control Valve For Lumbar Support
        • Preliminary Work
        • Removing And Installing Control Valve For Lumbar Support Adjustment
        • Subsequent Work
      • WM, 723419 - Removing And Installing Lumbar Support
        • Component Information
          • Installation Position Of Lumbar Support
        • Preliminary Work
        • Removing And Installing Lumbar Support
        • Subsequent Work
      • WM, 723655 - Replacing Lumbar-Support Motor
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Lumbar-Support Motor
        • Installing Lumbar-Support Motor
        • Checking Function Of Lumbar-Support Motor
        • Subsequent Work
      • WM, 723819 - Removing And Installing Control Valve For Air Cushion
        • Component Information
          • Installation Position Of Control Valve For Air Cushion
        • Preliminary Work
        • Removing And Installing Control Valve For Air Cushion
        • Subsequent Work
      • WM, 723955 - Replacing Air Cushion Motor
        • Component Information
          • Information
      • WM, 728619 - Removing And Installing Seat Adjustment Switch
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Seat Adjustment Switch
        • Subsequent Work
      • WM, 728719 - Removing And Installing Motor For Seat Adjustment
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Motor For Seat Adjustment
        • Installing Motor For Seat Adjustment
        • Subsequent Work
      • WM, 728819 - Removing And Installing Motor For Front Vertical Adjustment
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Motor For Front Vertical Adjustment
        • Installing Motor For Front Vertical Adjustment
        • Subsequent Work
      • WM, 728919 - Removing And Installing Motor For Backrest Adjustment
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Motor For Backrest Adjustment
        • Subsequent Work
      • WM, 729319 - Removing And Installing Control Unit For Memory Seat Adjustment
        • Tools
        • Component Information
          • Installation Position Of Control Unit For Memory Seat Adjustment
        • Preliminary Work
        • Removing And Installing Control Unit For Memory Seat Adjustment
        • Subsequent Work
      • WM, 729419 - Removing And Installing Switch For Memory Seat Adjustment
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Switch For Memory Seat Adjustment
        • Subsequent Work
    • 74 Seat Cushions, Seat Covers -- 982 - BOXSTER/CAYMAN
      • WM, 740819 - Removing And Installing Front Seat Extension
        • Preliminary Work
        • Removing And Installing Front Seat Extension
        • Subsequent Work
      • WM, 740919 - Removing And Installing Suction Fan For Seat Surface
        • Component Information
          • Installation Position Of Suction Fan For Seat Surface
        • Preliminary Work
          • Preliminary Work For Suction Fan For Seat Surface On Passenger's Side
          • Preliminary Work For Suction Fan For Seat Surface On Driver's Side
          • Removing And Installing Suction Fan For Seat Surface
        • Subsequent Work
          • Subsequent Work For Suction Fan For Seat Surface On Passenger's Side
          • Subsequent Work For Suction Fan For Seat Surface On Driver's Side
      • WM, 741019 - Removing And Installing Padding For Front Seat (Air-Conditioned Comfort Seat)
        • Tools
        • Preliminary Work
        • Removing Padding For Front Seat (Air-Conditioned Comfort Seat)
        • Installing Padding For Front Seat (Air-Conditioned Comfort Seat)
        • Subsequent Work
          • Checking Seat Following Removal
      • WM, 741019 - Removing And Installing Padding For Front Seat
        • Preliminary Work
        • Removing Padding For Front Seat
        • Installing Padding For Front Seat
        • Subsequent Work
      • WM, 741319 - Removing And Installing Cover For Front Seat
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Front Seat Cover
        • Installing Front Seat Cover
        • Subsequent Work
      • WM, 741619 - Removing And Installing Suction Fan For Backrest Surface
        • Component Information
          • Installation Position Of Suction Fan For Backrest Surface
        • Preliminary Work
        • Removing And Installing Suction Fan For Backrest Surface
        • Subsequent Work
      • WM, 741719 - Removing And Installing Padding For Front Backrest (Sports Seat Plus)
        • Component Information
          • Installation Position Of Padding For Front Backrest (Sports Seat Plus)
        • Preliminary Work
        • Removing Padding For Front Backrest (Sports Seat Plus)
        • Installing Padding For Front Backrest (Sports Seat Plus)
        • Subsequent Work
      • WM, 741719 - Removing And Installing Padding For Front Backrest
        • Component Information
          • Installation Position Of Padding For Front Backrest
        • Preliminary Work
        • Removing Padding For Front Backrest
        • Installing Padding For Front Backrest
        • Subsequent Work
      • WM, 741819 - Removing And Installing Padding For Front Middle Backrest
        • Tools
        • Component Information
          • Installation Position Of Padding For Front Middle Backrest
        • Preliminary Work
        • Removing Padding For Front Middle Backrest
        • Installing Padding For Front Middle Backrest
        • Subsequent Work
      • WM, 741819 - Removing And Installing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Component Information
          • Installation Position Of Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Preliminary Work
        • Removing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Installing Padding For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Subsequent Work
      • WM, 741919 - Removing And Installing Front Backrest Cover
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Cover For Front Backrest
        • Installing Cover For Front Backrest
        • Subsequent Work
      • WM, 741919 - Removing And Installing Cover For Front Backrest (Sports Seat Plus)
        • Tools
        • Component Information
          • Installation Position Of Cover For Front Backrest (Sports Seat Plus)
        • Preliminary Work
        • Removing And Installing Cover For Front Backrest (Sports Seat Plus)
        • Subsequent Work
      • WM, 742019 - Removing And Installing Cover For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Cover For Front Middle Backrest (Air-Conditioned Comfort Seat)
        • Subsequent Work
      • WM, 742019 - Removing And Installing Cover For Front Middle Backrest
        • Component Information
          • Installation Position Of Cover For Front Middle Backrest
        • Removing And Installing Cover For Front Middle Backrest
      • WM, 742819 - Removing And Installing Heater Element For Front Seat
        • Component Information
          • Installation Position
        • Removing And Installing Heater Element For Front Seat
      • WM, 742819 - Removing And Installing Heating Element For Seat (Sports Seat Plus)
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Heating Element For Seat (Sports Seat Plus)
        • Removing And Installing Heating Element For Seat (Sports Seat Plus) With Active Seat Ventilation
          • Removing And Installing Heating Element For Seat Side Bolsters (Sports Seat Plus) With Active Seat Ventilation
          • Removing Heating Element For Seat (Sports Seat Plus) With Active Seat Ventilation
        • Installing Heating Element For Seat Surface (Sports Seat Plus) With Active Seat Ventilation
        • Subsequent Work
      • WM, 742819 - Removing And Installing Heating Element For Front Seat (Air-Conditioned Comfort Seat)
        • Component Information
          • Installation Position
        • Removing And Installing Heating Element For Front Seat (Air-Conditioned Comfort Seat)
      • WM, 742919 - Removing And Installing Heating Element For Front Backrest (Air-Conditioned Comfort Seat)
        • Component Information
          • Installation Position
        • Removing And Installing Heating Element For Front Backrest (Air-Conditioned Comfort Seat)
          • Removing And Installing Heating Element For Front Middle Backrest (Air-Conditioned Comfort Seat)
      • WM, 742919 - Removing And Installing Heating Element For Backrest (Sports Seat Plus)
        • Component Information
          • Installation Position
        • Removing And Installing Heating Element For Front Backrest (Sports Seat Plus)
          • Removing And Installing Heating Element For Front Middle Backrest (Sports Seat Plus)
          • Removing And Installing Heating Element For Front Backrest (Sports Seat Plus)
      • WM, 742919 - Removing And Installing Heater Element For Front Backrest
        • Component Information
          • Installation Position
        • Removing And Installing Heater Element For Front Backrest
  • Sun Roof/T-Top/Convertible Top
    • 60 - Sliding Roof, Tilting Roof -- 982 - BOXSTER/CAYMAN
      • WM, 6048IN00 Water Drain
        • Checking Water Drains At The Front
        • Checking Water Drains On Door Sill
        • Checking Water Drain On Filler Flap
    • 61 Convertible Top, Hardtop -- 982 - BOXSTER/CAYMAN
      • WM, 610119 Removing And Installing Convertible Top
        • Technical Values
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing And Installing Convertible Top
        • Subsequent Work
      • WM, 6101IN Convertible Top In Service Position
        • Convertible Top In Service Position
          • Moving convertible top to service position
          • Moving convertible top out of service position
      • WM, 610519 Removing And Installing Front Lock
        • Technical Values
        • Component Information
          • Installation position
        • Preliminary Work
          • Notes
          • Removing and installing front lock
        • Subsequent Work
      • WM, 610919 Removing And Installing ROOFLINER
        • Parts
        • Component Information
          • Installation position of roofliner
        • Preliminary Work
        • Removing ROOFLINER
        • Installing ROOFLINER
        • Subsequent Work
      • WM, 611319 Removing And Installing Front Roof Frame
        • Technical Values
        • Preliminary Work
        • Removing Front Roof Frame
        • Adjusting Front Roof Frame
        • Installing Front Roof Frame
        • Subsequent Work
      • WM, 611419 Removing And Installing Water Drip Pan
        • Component Information
          • Installation position of water drip pan
        • Preliminary Work
        • Removing And Installing Water Drip Pan
        • Subsequent Work
      • WM, 611919 Removing And Installing Convertible Top Lock
        • Technical Values
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing Convertible Top Lock
        • Installing Convertible Top Lock
        • Adjusting Convertible Top Lock
        • Subsequent Work
      • WM, 612219 Removing And Installing Seal For Cowl Panel Frame
        • Component Information
          • Installation position of seal for cowl panel frame
        • Preliminary Work
        • Removing And Installing Seal For Cowl Panel Frame
        • Subsequent Work
      • WM, 612319 Removing And Installing Rear Seal (Tension Bow)
        • Technical Values
        • Component Information
          • Installation position of rear seal (tension bow)
        • Preliminary Work
        • Removing Rear Seal (Tension Bow)
          • Detaching convertible top covering at the rear
        • Installing Rear Seal (Tension Bow)
        • Securing Convertible Top Covering At The Rear
        • Subsequent Work
      • WM, 612519 Removing And Installing Upper Lateral Seal
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing Upper Lateral Seal
        • Installing Upper Lateral Seal
        • Subsequent Work
      • WM, 612819 Removing And Installing Convertible Top Covering
        • Component Information
          • Installation position of convertible top covering
        • Preliminary Work
        • Removing And Installing Convertible Top Covering
          • Removing convertible top covering
          • Installing convertible top covering
        • Subsequent Work
      • WM, 612855 Replacing Convertible Top Covering
        • Technical Values
        • Preliminary Work
        • Removing Rear Tension Bow
        • Removing And Installing Holder
        • Installing Rear Tension Bow
        • Subsequent Work
      • WM, 6128IN Cleaning And Care Of The Convertible Top
        • Cleaning And Care Of The Convertible Top
          • General information
          • General information on cleaning the convertible top
          • Procedure for cleaning the convertible top
          • Preparing convertible top for hot-steam cleaning
          • Care of convertible-top seals
      • WM, 6128IN Cleaning And Care Instructions For Convertible Top
        • Cleaning And Care Instructions For Convertible Top
          • General information
          • General information on cleaning the convertible top
          • Procedure for cleaning the convertible top
          • Preparing convertible top for hot-steam cleaning
          • Care instructions for convertible-top seal
      • WM, 613037 Disassembling And Assembling Convertible Top Frame
        • Preliminary Work
        • Disassembling And Assembling Convertible Top Frame
        • Subsequent Work
      • WM, 613619 Removing And Installing Front Bow
        • Tools
        • Technical Values
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing Front Bow
          • Removing front roof strut
          • Installing front bow
        • Concluding Work
          • Subsequent work
      • WM, 613619 Removing And Installing Rear Roof Strut
        • Component Information
          • Installation position of rear roof strut
        • Preliminary Work
        • Removing And Installing Rear Roof Strut
        • Subsequent Work
      • WM, 614219 Removing And Installing Flap
        • Technical Values
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing Upper Part Of Flap
        • Removing Lower Part Of Flap
        • Installing Flap
        • Subsequent Work
      • WM, 614319 Removing And Installing Tension Rope
        • Parts
        • Technical Values
        • Component Information
          • Installation position of tension rope
        • Preliminary Work
        • Removing And Installing Tension Rope
        • Subsequent Work
      • WM, 614519 Removing And Installing Rubber Seal With Rail (Lower Lateral)
        • Technical Values
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing Rubber Seal With Rail (Lower Lateral)
        • Installing Rubber Seal With Rail (Lower Lateral)
        • Subsequent Work
      • WM, 614519 Removing And Installing Rubber Seal With Rail (Upper Lateral)
        • Technical Values
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing And Installing Rubber Seal With Rail (Upper Lateral)
        • Subsequent Work
      • WM, 616419 Removing And Installing Microswitch For Roof
        • Tools
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing Microswitch For Roof
        • Installing Microswitch For Roof
        • Subsequent Work
      • WM, 617019 Removing And Installing Motor For Drive Mechanism
        • Component Information
          • Installation position of motor for drive mechanism
        • Preliminary Work
          • Notes
          • Removing and installing motor for drive mechanism
        • Subsequent Work
      • WM, 619619 Removing And Installing Convertible Top Control Unit
        • Component Information
          • Installation position of convertible top control unit
        • Preliminary Work
        • Removing And Installing Convertible Top Control Unit
        • Subsequent Work
      • WM, 619655 Replacing Convertible Top Control Unit
        • Preliminary Work
        • Replacing Convertible Top Control Unit
  • Windows
    • 64 Glazing, Window Operation -- 982 - BOXSTER/CAYMAN
      • WM, 641219 Removing And Installing Windscreen
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Windscreen
        • Preparing Window Aperture For Installation
        • Preparing Windscreen For Installation
          • Preparing windscreen for installation (re-installation only)
          • Preparing windscreen for installation (new windscreen)
        • Installing Windscreen
        • Subsequent Work
      • WM, 644015 Adjusting Front Door Window
        • Tools
        • Technical Values
        • Preliminary Work
        • Adjusting Front Door Window
        • Checking Preload Of Door Window
        • Adjusting Preload Of Door Window
        • Subsequent Work
      • WM, 644019 Removing And Installing Front Door Window
        • Tools
        • Preliminary Work
        • Removing Front Door Window
        • Installing Front Door Window
        • Subsequent Work
      • WM, 644049 Reworking (Coating) Front Door Window
        • General Warning Notes
          • Warning note for hydrophobic window
        • Preliminary Work
          • Checking window glass
          • Preparing components for processing
          • Cleaning window surfaces
      • WM, 644519 Removing And Installing Front Window Guide
        • Technical Values
        • Preliminary Work
        • Removing Front Window Guide
        • Installing Front Window Guide
        • Subsequent Work
      • WM, 644819 Removing And Installing Front Window Channel Seal
        • Removing Front Window Shaft Seal
        • Installing Front Window Channel Seal
      • WM, 645219 Removing And Installing Front Power Windows
        • Technical Values
        • Preliminary Work
        • Removing Front Power Windows
        • Installing Front Power Windows
        • Subsequent Work
      • WM, 645419 Removing And Installing Window Regulator Motor
        • Technical Values
        • Preliminary Work
        • Removing Window Regulator Motor
        • Installing Window Regulator Motor
        • Subsequent Work
      • WM, 645819 Removing And Installing Switch For Power Windows
        • Preliminary Work
        • Removing Switch For Power Windows
        • Installing Switch For Power Windows
        • Subsequent Work
      • WM, 648601 Checking Function Of Heated Rear Window
        • Tools
        • Checking Function Of Heated Rear Window
• Brakes
  • Mechanical - Hydraulic
    • 46 Brakes - Brake Mechanism 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 4600TW Technical Data/Brake Wear Limit (PCCB)
        • Technical Values
        • Technical Data/Brake Wear Limit (PCCB)
          • Technical Data
          • Test Values/Wear Limits
      • WM, 4600TW Technical Data/Brake Wear Limit
        • Technical Values
        • Technical Data/Brake Wear Limit
          • Technical Data
          • Test Values/Wear Limits
      • WM, 460519 Removing And Installing Brake Pedal
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Brake Pedal
          • Removing Brake Pedal
          • Installing Brake Pedal
        • Subsequent Work
      • WM, 463456 Replacing Front PCCB Brake Pads
        • Replacing Front PCCB Brake Pads
      • WM, 463556 Replacing Rear PCCB Brake Pads
        • Replacing Rear PCCB Brake Pads
      • WM, 463602 Checking Thickness Of Front Brake Pads
        • General Warning Notes
        • Checking Thickness Of Front Brake Pads
          • Inspection During Intermediate Maintenance
          • Inspection During Maintenance
      • WM, 463656 Replacing Front Disc Brake Pads
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Front Disc Brake Pads
          • Notes
          • Installing Front Disc Brake Pads
        • Subsequent Work
        • Information
          • Bedding In The Brake Pads
      • WM, 463802 Checking Thickness Of Rear Brake Pads
        • General Warning Notes
        • Checking Thickness Of Rear Brake Pads
          • Inspection During Intermediate Maintenance
          • Inspection During Maintenance
      • WM, 463856 Replace Rear Disc Brake Pads
        • Tools
        • Preliminary Work
        • Replace Rear Disc Brake Pads
          • Notes
          • Installing Brake Pad Rear
        • Subsequent Work
        • Information
          • Bedding In The Brake Pads
      • WM, 465002 Checking Front Brake Discs - Wear Assessment
        • Checking Front Brake Discs
          • Information On Brake Disc Wear Assessment
          • Checking Grey Cast-Iron Brake Discs - Evaluating Cracks
          • Checking Grey Cast-Iron Brake Discs - Minimum Thickness
      • WM, 465004 Measuring Front Brake Discs
        • Tools
        • Technical Values
        • Preliminary Work
        • Measuring Front Brake Discs
        • Subsequent Work
      • WM, 465019 Removing And Installing Front Brake Disc
        • Technical Values
        • Preliminary Work
        • Removing Front Brake Disc
          • Notes
          • Installing Front Brake Disc
        • Subsequent Work
        • Information
          • Bedding In The Brake Pads
      • WM, 465102 Checking Front PCCB Brake Discs (Wear Assessment)
        • Information On PCCB Brake Discs
          • General Information On PCCP Brake Discs
          • General Information On Replacing Worn PCCB Brake Discs
          • Causes Of Build-Up On PCCB Brake Discs
        • Checking Front PCCB Brake Discs
          • Performing Visual Inspection Of Friction Surfaces
          • Evaluation Of Surface Roughness
        • Checking Brake Discs For Minimum Thickness
        • Checking Brake Disc For Edge Damage
      • WM, 465119 Removing And Installing Front PCCB Brake Disc
        • Removing And Installing Front PCCB Brake Disc
      • WM, 465302 Checking Rear Brake Discs - Wear Assessment
        • Checking Rear Brake Discs
      • WM, 465304 Measuring Rear Brake Discs
        • Measuring Rear Brake Discs
      • WM, 465319 Removing And Installing Rear Brake Disc
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Rear Brake Disc
        • Installing Rear Brake Disc
        • Subsequent Work
        • Information
          • Bedding In The Brake Pads
      • WM, 465402 Checking Rear PCCB Brake Discs (Wear Assessment)
        • Checking Rear PCCB Brake Discs
      • WM, 465419 Removing And Installing Rear PCCB Brake Disc
        • Removing And Installing Rear PCCB Brake Disc
      • WM, 466119 Removing And Installing Parking Brake Actuator
        • Component Information
          • Installation Position Of Parking Brake Actuator
        • Preliminary Work
        • Removing And Installing Parking Brake Actuator
        • Subsequent Work
      • WM, 466219 Removing And Installing Control Unit For Parking Brake
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Control Unit For Parking Brake
        • Subsequent Work
      • WM, 466255 Replacing Parking Brake Control Unit
        • Replacing Control Unit For Parking Brake
      • Parking Brake Adjustment/Calibration Difficult Or Not Possible
        • Vehicles Affected
        • Revision History
        • Customer Concern
        • Technical Background
        • Service Information
        • Production Information
        • Warranty
        • Search Items
      • WM, 468301 Checking Actuator Travel Of Parking-Brake Shoes
        • Tools
        • Technical Values
        • Checking Actuator Travel Of Parking-Brake Shoes
      • WM, 468316 Adjusting And Calibrating Parking-Brake Shoes
        • Tools
        • Technical Values
        • Preliminary Work
        • Adjusting And Calibrating Parking-Brake Shoes
      • WM, 468320 Removing And Installing Parking-Brake Shoes
        • Preliminary Work
        • Removing Parking-Brake Shoes
        • Installing Parking-Brake Shoes
        • Subsequent Work
      • WM, 468350 Grinding Down Parking-Brake Shoes
        • Grinding Down Parking-Brake Shoes
      • WM, 468519 Removing And Installing Spreader Device (Actuator)
        • Technical Values
        • Emergency Release For EPB
        • Preliminary Work
        • Removing Spreader Device (Actuator)
        • Installing Spreader Device (Actuator)
        • Subsequent Work
    • 47 Brakes- Brake Hydraulic System, Regulator, Booster 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 470107 Bleeding The Brake System
        • Tools
        • Technical Values
        • Preliminary Work
        • Bleeding The Brake System
        • Subsequent Work
      • WM, 470801 Checking Brake Fluid Level
        • Checking Brake Fluid Level
      • WM, 470855 Replacing Brake Fluid
        • Technical Values
        • Preliminary Work
        • Replacing Brake Fluid
        • Subsequent Work
      • WM, 471019 Removing And Installing Brake Fluid Reservoir
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Brake Fluid Reservoir
        • Installing Brake Fluid Reservoir
        • Subsequent Work
      • WM, 471519 Removing And Installing Brake Master Cylinder
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Brake Master Cylinder
        • Installing Brake Master Cylinder
        • Subsequent Work
      • WM, 473919 Removing And Installing Front Brake CALLIPER
        • Technical Values
        • Preliminary Work
        • Removing Front Brake CALLIPER
        • Installing Front Brake CALLIPER
        • Subsequent Work
      • WM, 473956 Replacing Brake CALLIPER Screws
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Brake CALLIPER Screws
        • Subsequent Work
      • WM, 474119 Removing And Installing Rear Brake CALLIPER
        • Technical Values
        • Preliminary Work
        • Removing Rear Brake CALLIPER
        • Installing Rear Brake CALLIPER
        • Subsequent Work
      • WM, 477019 Removing And Reinstalling Brake Booster
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Brake Booster
        • Installing Brake Booster
        • Subsequent Work
      • WM, 477619 Removing And Installing Vacuum Pump
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Vacuum Pump
          • Removing Vacuum Pump
          • Installing Vacuum Pump
        • Subsequent Work
• Collision
  • Body Panels
    • 50 - Body Front
      • WM, 501055 Replacing Front Closing Panel
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Front Closing Panel
        • Preparing Front Closing Panel For Installation
        • Preparing Connection Areas Of Body For Installing Closing Panel
        • Installing Front Closing Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 501455 Replacing Front Panel
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Front Panel
        • Preparing Connection Areas Of Body For Installing Front Panel
        • Preparing Front Panel For Installation
        • Installing Front Panel
          • Installing Front Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 502055 Replacing Floor Front Section
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Floor Front Section
        • Preparing Floor Front Section For Installation
        • Preparing Connection Areas Of Body For Installing Floor Front Section
          • Preparing Connection Areas Of Body For Installing Floor Front Section
        • Installing Floor Front Section
          • Installing Floor Front Section
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 502355 Replacing Luggage Compartment Bracket
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (Without Straightening System)
          • Safety Instructions And Information On Quality
        • Tools And Materials
          • Tools And Materials
        • Removing Luggage Compartment Bracket
        • Preparing Front Luggage Compartment Bracket For Installation
          • Preparing Luggage Compartment Bracket For Installation
        • Preparing Connection Areas Of Body For Installing Luggage Compartment Bracket
        • Installing Luggage Compartment Bracket
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 503955 Replacing Spring Strut Mount
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Spring Strut Mount
        • Preparing Spring Strut Mount For Installation
        • Preparing Connection Areas Of Body For Installing Spring Strut Mount
        • Installing Spring Strut Mount
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 504255 Replacing Radiator Support
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Radiator Support
        • Preparing Radiator Support For Installation
        • Preparing Connection Areas Of The Body For Installing Radiator Support
        • Installing Radiator Support
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 505355 Replacing Wing Joining Plate
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Wing Joining Plate
        • Preparing Front Wing Joining Plate For Installation
        • Preparing Connection Areas Of Body For Installing Wing Joining Plate
        • Installing Wing Joining Plate
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 505519 Removing And Installing Front Wing
        • Notes
        • Preliminary Work
        • Removing And Installing Front Wing
        • Subsequent Work
      • WM, 505619 Removing And Installing Front Wheel Housing Liner
        • Notes
        • Preliminary Work
        • Removing And Installing Front Wheel Housing Liner
          • Removing And Installing Front Wheel Housing Liner - Rear Part
        • Removing And Installing Front Wheel Housing Liner - Front Part
        • Subsequent Work
      • WM, 507255 Replacing Longitudinal Member For Wheel Housing Upper Section
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Information
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Longitudinal Member For Wheel Housing Upper Section
        • Preparing Longitudinal Member For Wheel Housing
        • Preparing Connection Areas Of Body For Installing Longitudinal Member For Wheel Housing
        • Installing Longitudinal Member For Wheel Housing
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 507455 Replacing Front Wheel Housing
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Front Wheel Housing
          • Notes
          • Preparing Front Wheel Housing For Installation
        • Preparing Connection Areas Of Body For Installing Front Wheel Housing
        • Installing Front Wheel Housing
        • Subsequent Work
          • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 507955 Replacing Front Side Member (Section)
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety Instructions And Information On Quality
        • Removing Front Side Member
        • Preparing Connection Areas Of Body For Installing Side Member
          • Replacing Rivet Nut
        • Preparing Front Side Member For Installation
        • Installing Front Side Member
        • Subsequent Work
        • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 508419 Removing And Installing Battery Console
        • Notes
        • Preliminary Work
        • Removing And Installing Battery Console
        • Subsequent Work
      • WM, 508719 Removing And Installing Cowl Panel Cover
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Cowl Panel Cover
        • Subsequent Work
      • WM, 509555 Replacing Body Front Section
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Body Front Section
        • Preparing Body Front Section For Installation
        • Preparing Connection Areas Of Body For Installing Body Front Section
        • Installing Body Front Section
        • Cavity Preservation
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Staightening System)
    • 50 Body, Front -- 982 - BOXSTER/CAYMAN
      • WM, 501055 Replacing Front Closing Panel
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Front Closing Panel
        • Preparing Front Closing Panel For Installation
        • Preparing Connection Areas Of Body For Installing Closing Panel
        • Installing Front Closing Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 501455 Replacing Front Panel
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Front Panel
        • Preparing Connection Areas Of Body For Installing Front Panel
        • Preparing Front Panel For Installation
        • Installing Front Panel
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 502055 Replacing Floor Front Section
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Floor Front Section
        • Preparing Floor Front Section For Installation
        • Preparing Connection Areas Of Body For Installing Floor Front Section
        • Installing Floor Front Section
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 502355 Replacing Luggage Compartment Bracket
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Luggage Compartment Bracket
        • Preparing Front Luggage Compartment Bracket For Installation
          • Preparing Luggage Compartment Bracket For Installation
          • Preparing Connection Areas Of Body For Installing Luggage Compartment Bracket
          • Installing Luggage Compartment Bracket
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 503955 Replacing Spring Strut Mount
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Spring Strut Mount
        • Preparing Spring Strut Mount For Installation
        • Preparing Connection Areas Of Body For Installing Spring Strut Mount
        • Installing Spring Strut Mount
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 504255 Replacing Radiator Support
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Radiator Support
        • Preparing Radiator Support For Installation
        • Preparing Connection Areas Of The Body For Installing Radiator Support
        • Installing Radiator Support
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 505355 Replacing Wing Joining Plate
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Removing Wing Joining Plate
        • Preparing Front Wing Joining Plate For Installation
        • Preparing Connection Areas Of Body For Installing Wing Joining Plate
        • Installing Wing Joining Plate
        • Subsequent Work
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 505519 Removing And Installing Front Wing
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Wing
        • Subsequent Work
      • WM, 505619 Removing And Installing Front Wheel Housing Liner
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Wheel Housing Liner
          • Removing And Installing Front Wheel Housing Liner - Rear Part
          • Removing And Installing Front Wheel Housing Liner - Front Part
        • Subsequent Work
      • WM, 507255 Replacing Longitudinal Member For Wheel Housing Upper Section
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Information
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Longitudinal Member For Wheel Housing Upper Section
        • Preparing Longitudinal Member For Wheel Housing
        • Preparing Connection Areas Of Body For Installing Longitudinal Member For Wheel Housing
        • Installing Longitudinal Member For Wheel Housing
        • Subsequent Work
          • Overview
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 507455 Replacing Front Wheel Housing
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Front Wheel Housing
        • Preparing Front Wheel Housing For Installation
        • Preparing Connection Areas Of Body For Installing Front Wheel Housing
        • Installing Front Wheel Housing
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (Without Straightening System)
      • WM, 507955 Replacing Front Side Member (Section)
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Overview
          • Preliminary Work For Body Repairs (With Straightening System)
          • Safety Instructions And Information On Quality
        • Removing Front Side Member
        • Preparing Connection Areas Of Body For Installing Side Member
          • Replacing Rivet Nut
        • Preparing Front Side Member For Installation
        • Installing Front Side Member
        • Subsequent Work
          • Notes
          • Subsequent Work For Body Repairs (With Straightening System)
      • WM, 508419 Removing And Installing Battery Console
        • Technical Values
        • Preliminary Work
        • Removing And Installing Battery Console
        • Subsequent Work
      • WM, 508719 Removing And Installing Cowl Panel Cover
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Cowl Panel Cover
        • Subsequent Work
      • WM, 509555 Replacing Body Front Section
        • Parts
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Body Repairs (With Straightening System)
        • Safety And Quality Instructions
          • Safety Instructions And Information On Quality
        • Tools And Materials
        • Removing Body Front Section
        • Preparing Body Front Section For Installation
        • Preparing Connection Areas Of Body For Installing Body Front Section
        • Installing Body Front Section
        • Cavity Preservation
        • Subsequent Work
          • Subsequent Work For Body Repairs (With Straightening System)
      • 5095IN Video
    • 51 - Body Center, Roof, Frame
      • WM, 510355 Replacing Roof
        • Notes
        • Preliminary Work
          • Safety and quality instructions
            • Safety instructions and information on quality
        • Tools And Materials
        • Removing Roof
      • WM, 510655 Replacing Upper Front Roof Frame
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
          • Preliminary work
        • Safety Instructions And Information On Quality
        • Tools And Materials
          • Removing upper front roof frame
          • Preparing upper front roof frame for installation
        • Preparing Body Connection Areas
          • Installing upper front roof frame
            • Subsequent work
              • Notes
              • Subsequent work for body repairs (without straightening system)
      • WM, 511355 Replacing A-Pillar Reinforcement
        • Notes
        • Preliminary Work
          • Notes
          • Safety instructions and information on quality
        • Tools And Materials
          • Removing A-pillar reinforcement
        • Preparing A-Pillar Reinforcement
          • Preparing connection areas of the body for A-pillar reinforcement
            • Installing A-pillar reinforcement
        • Subsequent Work
      • WM, 514555 Replacing Outer Side Member
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Outer Side Member
        • Preparing Outer Side Member For Installation
          • Preparing body connection areas
            • Preparing connection areas of the body
        • Installing Outer Side Member
          • Subsequent work
            • Notes
            • Subsequent work for body repairs (without straightening system)
      • WM, 51735561 Replacing FLOORPAN
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Tools and materials
        • Removing FLOORPAN
        • Preparing FLOORPAN For Installation
          • Preparing connection areas of the body for installation
          • Installing floorpan
        • Subsequent Work
      • WM, 514855 Replacing Centre Side Member (Section)
        • Notes
        • Preliminary Work
          • Safety and quality instructions
            • Safety instructions and information on quality
        • General Warning Notes
          • Safety instructions for body repairs
        • Tools And Materials
          • Removing centre side member
        • Preparing Centre Side Member For Installation
        • Preparing Connection Areas Of Body For Installing Centre Side Member
          • Installing centre side member
        • Subsequent Work
          • Subsequent work for body repairs (without straightening system)
      • WM, 518755 Replacing Seat Cross Member
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Tools and materials
            • Removing seat cross member
              • Preparing seat cross member
        • Preparing Connection Points On The Body
          • Preparing body connection points
          • Installing seat cross member
        • Subsequent Work
          • Subsequent work for body repairs (without straightening system)
      • WM, 519219 Removing And Installing Cover For Front Underbody
        • Notes
        • Preliminary Work
          • Notes
          • Removing and installing cover for front underbody
      • WM, 519319 Removing And Installing Cover For Centre Underbody
        • Notes
        • Component Information
          • Installation position of centre underbody cover (at the sides)
        • Preliminary Work
        • Removing And Installing Cover For Centre Underbody At The Sides
      • WM, 510555 Replacing Roof Pillar (Reinforcement)
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Roof Pillar (Reinforcement)
        • Preparing Roof Pillar (Reinforcement) For Installation
        • Preparing Body Connection Areas
          • Preparing connection areas of the body
        • Installing Roof Pillar (Reinforcement)
        • Subsequent Work
          • Subsequent work
          • Subsequent work for body repairs (without straightening system)
      • WM, 510555 Replacing Roof Pillar
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Roof Pillar
        • Preparing Roof Pillar For Installation
        • Preparing Connection Points On The Body
        • Installing Roof Pillar
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 510955 Replacing Rear Cross Member
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Information
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Cross Member
        • Preparing Rear Cross Member For Installation
        • Preparing Body Connection Areas
          • Preparing connection areas of the body
        • Installing Rear Cross Member
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 511255 Replacing A-Pillar
        • Notes
        • Preliminary Work
          • Notes
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing A-Pillar
        • Preparing A-Pillar
        • Preparing Connection Points On The Body
        • Installing A-Pillar
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 511955 Replacing Cowl Panel
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Cowl Panel
        • Preparing Cowl Panel
        • Preparing Body Connection Areas
          • Preparing connection areas of the body
        • Installing Cowl Panel
        • Subsequent Work
          • Subsequent work for body repairs (without straightening system)
      • WM, 514255 Replacing B-Pillar Reinforcement
        • Notes
        • Preliminary Work
          • Notes
          • Preliminary work for body repairs (without straightening system)
        • Safety Instructions And Information On Quality
        • General Warning Notes
          • Safety instructions for body repairs
        • Tools And Materials
        • Removing B-Pillar Reinforcement
        • Preparing B-Pillar Reinforcement For Installation
        • Preparing Connection Areas For Installing B-Pillar Reinforcement
        • Installing B-Pillar Reinforcement
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 514555 Replacing Outer Side Member (Front Section)
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Outer Side Member (Front Section)
        • Preparing Outer Side Member (Front Section) For Installation
        • Preparing Connection Areas Of The Body For Installation
        • Installing Outer Side Member (Front Section)
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 516555 Replacing Front Cross Panel (Front Crash Support)
        • Notes
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Removing Front Cross Panel (Front Crash Support)
        • Preparing Front Cross Panel (Front Crash Support) For Installation
        • Preparing Connection Areas Of The Body For Installing The Front Cross Panel (Front Crash Support)
        • Installing Front Cross Panel (Front Crash Support)
        • Subsequent Work
          • Subsequent work for body repairs (without straightening system)
      • WM, 516819 Removing And Installing Dashboard Bracket
        • Notes
        • Component Information
          • Installation position of dashboard bracket
        • Preliminary Work
        • Removing And Installing Dashboard Bracket
        • Replacing Holder For Dashboard Bracket
        • Subsequent Work
      • WM, 518941 Threaded Bushes
        • Notes
        • Information
          • Overview of repair areas
        • Installing Repair Threaded Bush
          • Repairing (luggage compartment) cross member thread
          • Repairing spring strut mount thread
          • Thread on engine mount
          • Thread on rear side member
          • Thread on rear side member (impact absorber mount)
          • Thread on threaded joint for roll-over bar
          • Thread on rear spring strut mount
      • WM, 519419 Removing And Installing Cover For Rear Underbody
        • Notes
        • Component Information
          • Installation position of rear underbody cover
        • Preliminary Work
        • Removing Cover For Rear Underbody
        • Installing Cover For Rear Underbody
        • Subsequent Work
      • WM, 511023 Installing (Front) Roll-Over Bar Reinforcement
        • Notes
        • Safety And Quality Instructions
        • Tools And Materials
        • Component Information
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Preparing Connection Areas Of Body For Installing (Front) Roll-Over Bar Reinforcement
        • Preparing (Front) Roll-Over Bar Reinforcement For Installation
        • Installing (Front) Roll-Over Bar Reinforcement
        • Installing (Front) Roll-Over Bar Reinforcement At The Bottom
        • Subsequent Work
          • Subsequent work for body repairs
      • WM, 511023 INSTALLING (REAR) ROLL-OVER BAR REINFORCEMENt
        • Notes
        • Safety And Quality Instructions
        • Tools And Materials
        • Component Information
          • Installation position
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Preparing Connection Areas Of Body For Installing (Rear) Roll-Over Bar Reinforcement
        • Preparing (Rear) Roll-Over Bar Reinforcement For Installation
        • Installing (Rear) Roll-Over Bar Reinforcement
        • Subsequent Work
          • Subsequent work for body repairs
      • WM, 519219 Removing And Installing Front Cover (Fin)
        • Notes
        • Removing Front Cover (Fin)
        • Installing Front Cover (Fin)
      • WM, 51922327 Installing Front Cover (Fin)
        • Notes
        • Installing Front Cover (Fin)
          • Installing fastening parts for front cover (fin)
    • 53 - Body Rear
      • WM, 530255 Replacing Rear End
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (with straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear End
          • Preparing rear end for installation
        • Preparing Connection Areas Of The Body For Installation
          • Installing rear end
        • Subsequent Work
          • Subsequent work for body repairs (with straightening system)
      • WM, 530555 Replacing Rear Closing Panel
        • Notes
        • Preliminary Work
          • Safety and quality instructions
            • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Closing Panel
        • Preparing Rear Closing Panel For Installation
          • Preparing connection areas of body for installing closing panel
        • Installing Rear Closing Panel
      • WM, 531355 Replacing Lower Corner Part
        • Notes
        • Preliminary Work
          • Preliminary Work For Body Repairs (Without Straightening System)
        • Safety Instructions And Information On Quality
          • Tools and materials
        • Removing Lower Corner Plate
          • Preparing connection areas for installation
        • Preparing Lower Corner Plate For Installation
        • Installing Lower Corner Plate
      • WM, 534755 Replacing Closing Element For Longitudinal Member
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary work for body repairs (with straightening system)
        • Information
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Closing Element For Longitudinal Member
          • Preparing connection areas of body for installing closing element for longitudinal member
        • Preparing Closing Element For Longitudinal Member For Installation
          • Installing closing element for longitudinal member
        • Subsequent Work
          • Subsequent work for body repairs (with straightening system)
      • WM, 534855 Replacing Rear Side Member
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (with straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Side Member
        • Preparing Rear Side Member For Installation
          • Preparing connection areas of body for installing rear side member
        • Installing Rear Side Member
          • Subsequent work
            • Subsequent work
      • WM, 535555 Replacing Side Panel
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • General warning notes
            • Safety instructions for body repairs
        • Tools And Materials
        • Removing Side Panel
        • Preparing Side Panel For Installation
        • Preparing Connection Areas Of Body For Installing Rear Side Panel
      • WM, 536855 Replacing Rear Wheel Housing
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary work for body repairs (with straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Wheel Housing
        • Preparing Rear Wheel Housing For Installation
        • Preparing Connection Areas Of The Body For Installing The Rear Wheel Housing
        • Installing Rear Wheel Housing
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (with straightening system)
      • WM, 536919 Removing And Installing Rear Wheel Housing Liner
        • Component Information
          • Installation position of rear whet l housing liner
        • Preliminary Work
          • Notes
          • Removing and installing rear wheel housing liner
            • Subsequent work
      • WM, 532155 Replacing Rear FLOORPAN
        • Notes
        • Preliminary Work
          • Overview
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Rear Boot Floor Plate
        • Preparing Rear Boot Floor Plate For Installation
          • Preparing rear trunk floor panel for installation
        • Preparing Connection Areas Of The Body For Installing Rear Trunk Floor Panel
          • Preparing connection areas of body for installing rear trunk floor panel
        • Installing Rear Boot Floor Plate
          • Installing rear trunk floor panel
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
      • WM, 536155 Replacing Inner Side Section
        • Notes
        • Preliminary Work
          • Preliminary work for body repairs (without straightening system)
        • Safety And Quality Instructions
          • Safety instructions and information on quality
        • Tools And Materials
        • Removing Inner Side Section
        • Preparing Inner Side Section For Installation
        • Preparing Body Connection Areas
          • Preparing connection areas of the body
          • Installing inner side section
        • Subsequent Work
          • Notes
          • Subsequent work for body repairs (without straightening system)
    • 55 - Lids, Flaps
      • WM, 551319 Removing And Installing Servo Motor For Lid Opener
        • Preliminary Work
        • Removing And Installing Servo Motor For Lid Opener
        • Subsequent Work
      • WM, 552215 Adjusting Front Lid
        • Notes
        • Checking Gap Dimensions Of Front Lid
        • Adjusting Front Lid
      • WM, 552219 Removing And Installing Front Lid
        • Preliminary Work
        • Removing And Installing Front Lid
          • Subsequent work
      • WM, 552237 Disassembling And Assembling Front Lid
        • Preliminary Work
          • Disassembling front lid
        • Assembling Front Lid
      • WM, 552319 Removing And Installing Proximity Sensor For Front Lid
        • Component Information
          • Installation position
        • Preliminary Work
        • Removing Proximity Sensor For Front Lid
        • Installing Proximity Sensor For Front Lid
        • Subsequent Work
      • WM, 553119 Removing And Installing Front Pneumatic Spring
        • Removing And Installing Front Pneumatic Spring
          • Removing and installing front pneumatic spring on the lid
      • WM, 553319 Removing And Installing Front Lid Seal
        • Removing Front Lid Seal
      • WM, 553719 Removing And Installing Filler Flap
        • Preliminary Work
          • Removing filler flap
          • Installing filler flap
          • Subsequent work
      • WM, 553819 Removing And Installing Switching Element For Filler Flap
        • Preliminary Work
          • Removing switching element for filler flap
          • Installing switching element for filler flap
      • WM, 555719 Removing And Installing Rear Lid Release
        • Preliminary Work
          • Removing and installing rear lid release
            • Subsequent work
      • WM, 555919 Removing And Installing Rear Wall Cover
        • Preliminary Work
          • Notes
          • Component information
          • Removing and installing rear wall cover
          • Subsequent work
      • WM, 556119 Removing And Installing Servo Motor For Emergency Release
        • Preliminary Work
        • Removing And Installing Servo Motor For Emergency Release
        • Subsequent Work
      • WM, 557819 Removing And Installing Engine Compartment Lid
        • Preliminary Work
          • Removing and installing engine compartment lid
            • Subsequent work
      • WM, 558619 Removing And Installing Lower Part Of Rear Lid Lock
        • Notes
        • Preliminary Work
          • Removing and installing lower part of rear lid lock
          • Subsequent work
      • WM, 558719 Removing And Installing Upper Part Of Rear Lid Lock
        • Preliminary Work
      • WM, 559019 Removing And Installing Rear Lid
        • Preliminary Work
          • Removing and installing rear lid
            • Subsequent work
      • WM, 559037 Disassembling And Assembling Rear Lid
        • Preliminary Work
        • Disassembling And Assembling Rear Lid
          • Subsequent work
      • WM, 559119 Removing And Installing Rear Lid Hinge
        • Notes
        • Preliminary Work
          • Removing and installing rear lid hinge
          • Subsequent work
      • WM, 559219 Removing And Installing Proximity Sensor For Rear Lid
        • Preliminary Work
        • Removing Proximity Sensor For Rear Lid
        • Installing Proximity Sensor For Rear Lid
        • Subsequent Work
      • WM, 559319 Removing And Installing Rear Pneumatic Spring
        • Removing And Installing Rear Pneumatic Spring
        • Function Test
      • WM, 551019 Removing And Installing Release For Front Lid
        • Preliminary Work
          • Notes
          • Removing and installing release for front lid
          • Subsequent work
      • WM, 551719 Removing And Installing Lower Part Of Front Lid Lock
        • Notes
        • Component Information
          • Installation position of lower part of front lock
        • Preliminary Work
        • Removing Lower Part Of Front Lid Lock
        • Installing Lower Part Of Front Lid Lock
        • Subsequent Work
      • WM, 551819 Removing And Installing Upper Part Of Front Lid Lock
        • Notes
        • Removing And Installing Upper Part Of Front Lid Lock
        • Checking Upper Part Of Front Lid Lock
          • Checking position of upper part of front lid lock
          • Checking lid function
      • WM, 552519 Removing And Installing Front Lid Hinge
        • Notes
        • Preliminary Work
        • Removing And Installing Front Lid Hinge
        • Subsequent Work
      • WM, 556219 Removing And Installing Front Emergency Release
        • Removing And Installing Front Emergency Release
        • Disassembling Emergency Release
        • Checking Front Emergency Release
      • WM, 556319 Removing And Installing Rear Emergency Release
        • Removing And Installing Rear Emergency Release
        • Checking Rear Emergency Release
      • WM, 558319 Removing And Installing Rear Lid Release Cable
        • Preliminary Work
        • Removing And Installing Rear Lid Release Cable
        • Subsequent Work
      • WM, 559015 Adjusting Rear Lid
        • Notes
        • Checking Gap Dimensions Of Rear Lid
        • Preliminary Work
        • Adjusting Rear Lid
          • Adjusting rear lid in x and y direction
          • Adjusting lid in z direction
        • Subsequent Work
      • WM, 559419 Removing And Installing Rear Lid Seal
        • Removing Rear Lid Seal
        • Installing Rear Lid Seal
    • 55 - Lids, Flaps -- 982 - BOXSTER/CAYMAN
      • WM, 551019 Removing And Installing Release For Front Lid
        • Preliminary Work
        • Removing And Installing Release For Front Lid
        • Subsequent Work
      • WM, 551319 Removing And Installing Servo Motor For Lid Opener
        • Preliminary Work
        • Removing And Installing Servo Motor For Lid Opener
        • Subsequent Work
      • WM, 551719 Removing And Installing Lower Part Of Front Lid Lock
        • Technical Values
        • Component Information
          • Installation Position Of Lower Part Of Front Lock
        • Preliminary Work
        • Removing Lower Part Of Front Lid Lock
        • Installing Lower Part Of Front Lid Lock
        • Subsequent Work
      • WM, 551819 Removing And Installing Upper Part Of Front Lid Lock
        • Technical Values
        • Removing And Installing Upper Part Of Front Lid Lock
        • Checking Upper Part Of Front Lid Lock
          • Checking Position Of Upper Part Of Front Lid Lock
        • Checking Lid Function
      • WM, 552215 Adjusting Front Lid
        • Tools
        • Technical Values
        • Checking Gap Dimensions Of Front Lid
        • Adjusting Front Lid
      • WM, 552219 Removing And Installing Front Lid
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Lid
        • Subsequent Work
      • WM, 552237 Disassembling And Assembling Front Lid
        • Preliminary Work
        • Disassembling Front Lid
        • Assembling Front Lid
        • Subsequent Work
      • WM, 552319 Removing And Installing Proximity Sensor For Front Lid
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Proximity Sensor For Front Lid
        • Installing Proximity Sensor For Front Lid
        • Subsequent Work
      • WM, 552519 Removing And Installing Front Lid Hinge
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Lid Hinge
        • Subsequent Work
      • WM, 553119 Removing And Installing Front Pneumatic Spring
        • Removing And Installing Front Pneumatic Spring
          • Removing And Installing Front Pneumatic Spring On The Lid
          • Removing And Installing Front Pneumatic Spring On The Body
        • Function Test On Pneumatic Spring
      • WM, 553319 Removing And Installing Front Lid Seal
        • Removing Front Lid Seal
        • Installing Front Lid Seal
      • WM, 553719 Removing And Installing Filler Flap
        • Preliminary Work
        • Removing Filler Flap
        • Installing Filler Flap
        • Subsequent Work
      • WM, 553819 Removing And Installing Switching Element For Filler Flap
        • Preliminary Work
        • Removing Switching Element For Filler Flap
        • Installing Switching Element For Filler Flap
        • Subsequent Work
      • WM, 555719 Removing And Installing Rear Lid Release
        • Preliminary Work
        • Removing And Installing Rear Lid Release
        • Subsequent Work
      • WM, 555919 Removing And Installing Rear Wall Flap
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing And Installing Rear Wall Flap
        • Subsequent Work
      • WM, 556119 Removing And Installing Servo Motor For Emergency Release
        • Preliminary Work
        • Removing And Installing Servo Motor For Emergency Release
        • Subsequent Work
      • WM, 556219 Removing And Installing Front Emergency Release
        • Removing And Installing Front Emergency Release
        • Disassembling Emergency Release
        • Checking Front Emergency Release
      • WM, 556319 Removing And Installing Rear Emergency Release
        • Removing And Installing Rear Emergency Release
        • Checking Rear Emergency Release
      • WM, 557819 Removing And Installing Engine Compartment Lid
        • Technical Values
        • Preliminary Work
        • Removing And Installing Engine Compartment Lid
        • Subsequent Work
      • WM, 558619 Removing And Installing Lower Part Of Rear Lid Lock
        • Technical Values
        • Removing And Installing Lower Part Of Rear Lid Lock
        • Disconnecting Emergency Release
        • Subsequent Work
      • WM, 558719 Removing And Installing Upper Part Of Rear Lid Lock
        • Technical Values
        • Removing And Installing Upper Part Of Rear Lid Lock
        • Checking Upper Part Of Rear Lid Lock
          • Checking Position Of Upper Part Of Rear Lid Lock
      • WM, 559015 Adjusting Rear Lid
        • Tools
        • Technical Values
        • Checking Gap Dimensions Of Rear Lid
        • Adjusting Rear Lid
          • Adjusting Rear Lid In X And Y Direction
          • Adjusting Rear Lid In Z Direction
      • WM, 559019 Removing And Installing Rear Lid
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear Lid
        • Subsequent Work
      • WM, 559037 Disassembling And Assembling Rear Lid
        • Preliminary Work
        • Disassembling And Assembling Rear Lid
        • Subsequent Work
      • WM, 559119 Removing And Installing Rear Lid Hinge
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear Lid Hinge
        • Subsequent Work
      • WM, 559219 Removing And Installing Proximity Sensor For Rear Lid
        • Preliminary Work
        • Removing Proximity Sensor For Rear Lid
        • Installing Proximity Sensor For Rear Lid
        • Subsequent Work
      • WM, 559319 Removing And Installing Rear Pneumatic Spring
        • Removing And Installing Rear Pneumatic Spring
        • Function Test
      • WM, 559419 Removing And Installing Rear Lid Seal
        • Removing Rear Lid Seal
        • Installing Rear Lid Seal
  • General Collision Information
    • 5X - Body General
      • WM, 5X00IN01 Safety Instructions
        • Safety Instructions For Raising Vehicles
          • Danger of injury when raising vehicles
          • Damage when raising vehicles
        • General Warning Notes
          • Danger of injury while welding
          • Safety instructions for dealing with flying sparks during grinding and welding work
          • Safety instructions for grinding work
          • Safety instructions for fuel tank
          • Safety instructions for air conditioning
        • Safety Instructions For Adhesive Bonding
          • Danger of poisoning and injury when using adhesive
          • Safety instructions for Teromix-6700 two-component adhesive
        • Safety Instructions For Assembly Work
          • Safety instructions for sharp-edged body and unit parts
          • Safety instructions for airbag system
        • Safety Instructions For Corrosion Protection
          • Safety instructions for stopper location plan (body)
      • WM, 5X00IN02 Protection For Electric Components During Body Repairs
        • Information On Electronic Control Units
          • Notes
          • Protection against overvoltage when performing welding work
          • Replacing control units
      • WM, 5X00IN03 Corrosion Protection Measures During Repair Work
        • Measures For Maintaining Long-Term Body Protection
        • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
          • Prerequisite for maintaining the long-life guarantee
            • Porsche long-life guarantee conditions
      • WM, 5X00IN04 Body Parts Of Various Sheet-Steel Strengths
        • List Of Materials
        • High-Strength Steel
        • Very-High-Strength Steel
        • Ultra-High-Strength Steel
        • Separation Points
        • Welding Work
      • WM, 5X00IN07 General Information And Notes On Quality
        • Notes
        • Battery Trickle Charge
          • Battery trickle charging
        • Information On Control Units
          • Information on removing and installing control units
          • Protection against overvoltage when performing welding work
          • Information for replacing control units
        • Information On Maintaining Long-Life Corrosion Protection Or The Long-Life Guarantee
          • Information on maintaining long-life corrosion protection
          • Information on maintaining the long-life guarantee
      • WM, 5X00IN08 Bonding Log
      • WM, 5X00IN10 Welding Aluminium
        • Notes
        • Welding Aluminium
      • WM, 5X00IN11 Stud Welding
        • Notes
        • Preparing For Stud Welding
        • Welding Parameters
        • Welding Studs
      • WM, 5X00IN20 Working With Body Structural Foam
        • Notes
        • General Information
          • Version
          • Safety data sheet
          • Shelf life
          • Disposal
          • Bonding log
        • Structural Foam In Body Building
        • Working With Body Structural Foam
          • General information
          • Preparing bonding surfaces
            • Initial cleaning
            • Cleaning
          • Processing conditions
            • Notes
            • Joining process
          • Hardening
          • Assembly strength
          • Endurance strength
          • Corrosion protection
          • Work sample
      • WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00
        • Notes
        • General Information
          • Version
          • Safety data sheet
          • Shelf life
          • Disposal
          • Bonding log
        • Information On Structural Bonding In Vehicle Manufacturing
          • General
          • Combined joining processes
          • Separating body components
          • Welding in body components
        • Working With Body Structural Adhesive Pah.071.781.00
          • General information
          • Preparing bonding surfaces
            • Initial cleaning
            • Cleaning
            • Sand/grind until bare
          • Processing conditions
          • Joining process
          • Hardening
          • Assembly strength
          • Endurance strength
          • Corrosion protection
          • Work sample
      • WM, 5X00IN22 Working With Body Foam Filler
        • Notes
        • General Information
          • Version
          • Safety data sheet
          • Shelf life
          • Disposal
          • Bonding log
        • Foam Filler In Body Building
        • Working With Body Foam Filler
          • General information
          • Preparing bonding surfaces
            • Initial cleaning
            • Cleaning
          • Processing conditions
          • Joining process
          • Hardening
          • Subsequent work
          • Assembly and endurance strength
      • WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints
        • Notes
        • General Information
        • Loosening Joint
          • Punch rivets
          • Pressing out punch rivets
          • Punch and bottom die pairs
          • Pulling punch rivets
          • Penetrated joints
          • Loosening penetrated joints
        • Making Joint
          • Setting blind rivets
          • Setting flow-form rivets
      • WM, 5X00IN24 Setting Self-Tapping Screws
        • Notes
        • General Information
        • Setting Self-Tapping Screws
      • WM, 5X00IN25 Making Ground Connections
        • Notes
        • Making Ground Connection Using A Through Bolt
        • Making Ground Connection Using A Rivet Nut
      • WM, 5X00IN26 Replacing Coarse Threaded Bolts
        • Notes
        • Replacing Coarse Threaded Bolts
        • Subsequent Work
      • WM, 5X00IN33 Thread Repairs For Threaded Bushes With Collar
        • Thread Repairs For Threaded Bushes With Collar
      • WM, 5X00IN34 Thread Repairs For Threaded Bushes Without Collar
        • Notes
        • Repair Procedure For Threaded Bush Without Collar
      • WM, 5X00IN61 Work Sequence For Accident Repairs
        • Work Sequence For Accident Repairs
          • Procedure for accident repairs
          • Repairs
          • Replacement
      • WM, 5X00IN62 Procedure For Damage Diagnosis
        • Notes
        • Procedure For Damage Diagnosis
        • Identifiable Deformations On The Body Structure
        • No Identifiable Deformations On The Body Structure
      • WM, 5X00IN83 Connecting Elements For Body Repairs
        • Notes
        • Connecting Elements For Body Repairs
          • Rivets
          • Special elements
          • Adhesive and filler
      • WM, 5X00IN Technical Values
        • Notes
        • Technical Values
          • Underbody panelling
          • Working on rear lid
          • Technical values for door arrester
          • B-pillar seal
          • Technical values - front wing
      • WM, 5X00IN Cavity Preservation
        • Add-On Parts
        • Unpainted BODYSHELL
          • Notes
          • Bottom Of Front Of Vehicle
      • WM, 5X00IN Data Plates
        • Diagram: Data Plates
          • Front and right side of vehicle
      • WM, 5X00IN Underbody Protection
        • Notes
        • Tools And Materials
          • Tools
        • Diagram: Underbody Protection
          • Overview diagram - lower side member and floor
          • Overview diagram - lower rear end
      • WM, 5X00IN Information On Aluminium Repairs
        • Notes
        • List Of Materials
        • Damage Diagnosis
          • Repairs
            • Removing dents on accessories
              • Notes
              • If the part cracks during dent removal, the part must be replaced!
              • Front of vehicle
              • Centre of vehicle
              • Rear of vehicle
              • Accessories
        • Occupational Safety
          • Corrosion protection measures
      • WM, 5X00IN Gap Dimension
        • Notes
        • Lighting
          • Gap dimensions of main headlights
        • Windows
          • Front
            • Gap dimensions of front wing
        • Gap Dimensions - Side
          • Gap dimensions of front door
        • Front
          • Rear
            • Gap dimensions of rear lid
          • Gap dimensions of rear spoiler
      • WM, 5X00IN Exterior Colours
        • Exterior Colours - Solid Paint System
        • Exterior Colours - Metallic Paint System
      • WM, 5X00IN Vehicle Identification Number
        • Notes
        • Re-Imprinting New Vehicle Identification Number
          • Information
          • Spacer for replacing the vehicle identification number
        • Encoding The Vehicle Ident. No
          • Encoding vehicle identification number
          • Model year allocation
          • Allocation of position 8 - Model type
          • Allocation of production month
          • Allocation of production year
      • WM, 5X00IN Diagram: Stopper Plan
        • Diagram: Stopper Plan
          • A-pillar - Cabriolet
          • A-pillar - Coupe
          • Side panel and door sill
          • Top of floor
          • Lower side member and bottom of floor
          • Lower rear end
          • Rear end
          • Upper body front section
          • Top side of body front section
          • Firewall on left-hand drive vehicle
          • Firewall on right-hand drive vehicle
          • Bottom of floor
          • Lower body front section
      • WM, 5X00IN Seam Seal
        • Notes
        • Add-On Parts
          • Instructions for sealing seams
          • Door
        • Rear Lid
        • Unpainted BODYSHELL
          • Upper body front section
          • Upper body front section, front
          • Upper body front section (plenum panel)
          • Body front section and inner A-pillar
          • Body front section and outer A-pillar
          • Side of body front section
          • Inner body front section and top of floor
          • Bulkhead and centre floor
          • Wheel housing and upper rear side section
          • Lower body front section
          • Lower side member and bottom of floor
          • Lower engine compartment bulkhead
          • Upper rear end
          • Lower rear end
          • Lower side of rear end
          • Upper side of rear end
      • WM, 5X00IN Body Parts Of Various Sheet-Steel Strengths
        • List Of Materials
        • High-Strength Steel
        • Very-High-Strength Steel
        • Ultra-High-Strength Steel
        • Separation Points
        • Welding Work
• Drivelines & Axles
  • Axle Shafts
    • 40 Wheel Suspension Front Drive Shaft 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 4005IN Assessment Of Wheel Suspension After Accident Damage
        • General Information
          • Validity
          • Purpose
          • Assessment Of The Wheel Suspension Of A Vehicle Involved In An Accident
        • Exceptional Regulation/Order Handling
      • WM, 400819 Removing And Installing Front-Axle Support
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front-Axle Support
          • Removing Front-Axle Support
          • Installing Front-Axle Support
        • Subsequent Work
      • WM, 400919 Removing And Installing Front-Axle Cross Member
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front-Axle Cross Member
          • Removing Front-Axle Cross Member
        • Subsequent Work
      • WM, 401719 Removing And Reinstalling Lower Trailing Arm
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Reinstalling Lower Trailing Arm
          • Removing Lower Trailing Arm
          • Installing Lower Trailing Arm
        • Subsequent Work
      • WM, 401819 Removing And Installing Diagonal Arm
        • Technical Values
        • Preliminary Work
        • Removing And Installing Diagonal Arm
          • Removing Diagonal Arm
          • Installing Diagonal Arm
        • Subsequent Work
      • WM, 405019 Removing And Installing Front Wheel Bearing Housing
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Wheel Bearing Housing
          • Removing Front Wheel Bearing Housing
          • Installing Front Wheel Bearing Housing
        • Subsequent Work
      • WM, 405041 Repairing Wheel Bearing Housing
        • Tools
        • Preliminary Work
        • Repairing Wheel Bearing Housing
        • Subsequent Work
      • WM, 405719 Removing And Installing Front Wheel Bearing
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Wheel Bearing
          • Removing Front Wheel Bearing
          • Install The Front Wheel Bearing
        • Subsequent Work
      • WM, 407719 Removing And Installing Front Anti-Roll Bar
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Anti-Roll Bar
          • Removing Front Anti-Roll Bar
          • Installing Front Anti-Roll Bar
        • Subsequent Work
      • WM, 407819 Removing And Installing Connecting Link For Anti-Roll Bar
        • Technical Values
        • Preliminary Work
        • Removing And Installing Connecting Link For Anti-Roll Bar
          • Removing Connecting Link For Anti-Roll Bar
          • Installing Connecting Link For Anti-Roll Bar
        • Subsequent Work
      • WM, 408519 Removing And Installing Front Spring Strut
        • Removing And Installing Front Spring Strut
      • WM, 408537 Disassembling And Assembling Front Spring Strut
        • Tools
        • Information
          • Component And Assembly Overview
        • Preliminary Work
        • Disassembling And Assembling Front Spring Strut
          • Disassembling Front Spring Strut
        • Subsequent Work
      • SY, 408850 Eliminating Noise Symptoms - Reworking Front Spring-Strut Mount (Noises From Around The Dashboard/SY3015)
        • Parts
        • General Information
          • Symptom
          • Cause And Remedial Action
        • Tools And Materials
        • Reworking Spring-Strut Mount
          • Preliminary Work
        • Subsequent Work
        • Invoicing
  • Differentials & Drive Axles
    • 39 Final Drive Differential, Differential Lock 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 391555 - Replacing Double Sealing Ring (PDK)
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Double Sealing Ring
          • Removing Double Sealing Ring
          • Installing Double Sealing Ring
        • Subsequent Work
      • WM, 392255 - Replacing Sealing Ring On Right HALFSHAFT Flange (PDK)
        • Tools
        • Preliminary Work
        • Replacing Sealing Ring On Right HALFSHAFT Flange
          • Removing Sealing Ring On Right Halfshaft Flange
          • Installing Sealing Ring On Right Halfshaft Flange
        • Subsequent Work
      • WM, 392255 - Replacing Sealing Ring On Right HALFSHAFT Flange (Manual Transmission)
        • Tools
        • Preliminary Work
        • Replacing Sealing Ring On Right HALFSHAFT Flange
          • Removing Sealing Ring On Right Halfshaft Flange
          • Installing Sealing Ring On Right Halfshaft Flange
        • Subsequent Work
      • WM, 392255 - Replacing Sealing Ring On Left HALFSHAFT Flange (PDK)
        • Replacing Sealing Ring On Left HALFSHAFT Flange
      • WM, 392255 - Replacing Sealing Ring On Left HALFSHAFT Flange (Manual Transmission)
        • Tools
        • Preliminary Work
        • Replacing Sealing Ring On Left HALFSHAFT Flange
          • Removing Sealing Ring On Left Halfshaft Flange
          • Installing Sealing Ring On Left Halfshaft Flange
        • Subsequent Work
      • WM, 392419 - Removing And Installing Housing Neck For Left HALFSHAFT Flange (PDK)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Housing Neck For Left HALFSHAFT Flange
        • Installing Housing Neck For Left HALFSHAFT Flange
        • Subsequent Work
      • WM, 392519 - Removing And Installing Left HALFSHAFT Flange (Manual Transmission)
        • Removing And Installing Left HALFSHAFT Flange
      • WM, 392519 - Removing And Installing Left HALFSHAFT Flange (Double Clutch Transmission)
        • Removing And Installing Left HALFSHAFT Flange
      • WM, 392519 - Removing And Installing Right HALFSHAFT Flange (Double Clutch Transmission)
        • Removing And Installing Right HALFSHAFT Flange
      • WM, 392519 - Removing And Installing Right HALFSHAFT Flange (Manual Transmission)
        • Removing And Installing Right HALFSHAFT Flange
      • WM, 399035 - Checking And Topping Up Oil For Final Drive (Transmission Oil)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking And Topping Up Oil For Final Drive
        • Subsequent Work
      • WM, 399055 - Changing Oil For Final Drive (Transmission Oil)
        • Tools
        • Technical Values
        • Preliminary Work
        • Changing Oil For Final Drive
          • Draining Oil For Final Drive
          • Filling Oil For Final Drive
        • Subsequent Work
  • Driveshaft & Universal Joints
    • 42 Rear Wheel Suspension Drive Shaft 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 4203IN Assessment Of Wheel Suspension After Accident Damage
        • General Information
          • Validity
          • Purpose
          • Assessment Of The Wheel Suspension Of A Vehicle Involved In An Accident
          • Exceptional Regulation/Order Handling
      • WM, 420619 Removing And Installing Rear-Axle Cross Member
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear-Axle Cross Member
          • Removing Rear-Axle Cross Member
          • Installing Rear-Axle Cross Member
        • Subsequent Work
      • WM, 420919 Removing And Installing Tie Rod
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Tie Rod
          • Removing Rear Tie Rod
          • Installing Rear Tie Rod
        • Subsequent Work
      • WM, 421119 Removing And Installing Lower Trailing Arm
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Lower Trailing Arm
          • Removing Lower Trailing Arm
          • Installing Lower Trailing Arm
        • Subsequent Work
      • WM, 421320 Removing And Installing Struts
        • Technical Values
        • Preliminary Work
        • Removing And Installing Struts
          • Removing Struts
          • Installing Struts
        • Concluding Work
          • Subsequent Work
      • WM, 421419 Removing And Installing Support Plate
        • Technical Values
        • Preliminary Work
        • Removing And Installing Support Plate
          • Removing Support Plate
          • Installing Support Plate
        • Subsequent Work
      • WM, 422119 Removing And Installing Drive Shaft
        • Tools
        • Technical Values
        • Removing And Installing Drive Shaft
          • Removing Drive Shaft
          • Installing Drive Shaft
        • Subsequent Work
      • WM, 422855 Replacing Drive Shaft Bellows
        • Tools
        • Preliminary Work
        • Subsequent Work
      • WM, 423619 Removing And Installing Diagonal Arm
        • Technical Values
        • Preliminary Work
        • Removing And Installing Diagonal Arm
          • Removing Diagonal Arm
          • Replacing Diagonal Arm
          • Installing Diagonal Arm
        • Subsequent Work
      • WM, 423819 Removing And Installing Rear-Axle Carrier Side Section
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear-Axle Carrier Side Section
          • Removing Rear-Axle Carrier Side Section
          • Installing Rear-Axle Carrier Side Section
        • Subsequent Work
      • WM, 425219 Removing And Installing Rear Wheel Bearing Housing
        • Tools
        • Technical Values
        • Removing And Installing Rear Wheel Bearing Housing
      • WM, 425819 Removing And Installing Rear Wheel Bearing
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear Wheel Bearing
          • Removing Rear Wheel Bearing
          • Installing Rear Wheel Bearing
        • Subsequent Work
      • WM, 427119 Removing And Installing Rear Spring Strut
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear Spring Strut
          • Removing Rear Spring Strut
          • Installing Rear Spring Strut
        • Subsequent Work
      • WM, 427137 Disassembling And Assembling Rear Spring Strut
        • Tools
        • Technical Values
        • Information
          • Assembly And Component Overview
        • Preliminary Work
        • Disassembling And Assembling Rear Spring Strut
          • Disassembling Rear Spring Strut
          • Assembling Rear Spring Strut
        • Subsequent Work
      • WM, 429019 Removing And Installing Rear Anti-Roll Bar
        • Technical Values
        • Preliminary Work
        • Removing And Installing Rear Anti-Roll Bar
          • Removing Rear Anti-Roll Bar
          • Installing Rear Anti-Roll Bar
      • WM, 429119 Removing And Installing Connecting Link For Anti-Roll Bar
        • Technical Values
        • Preliminary Work
        • Removing And Installing Connecting Link For Anti-Roll Bar
          • Removing Connecting Link For Anti-Roll Bar
          • Installing Connecting Link For Anti-Roll Bar
        • Subsequent Work
• Electrical
  • Body Electrical
    • 9X - Electrical System - General -- 982 - BOXSTER/CAYMAN
      • WM, 9X00IN Basic Instructions And Procedure For Control Unit Programming Using The PIWIS Tester
        • Tools
        • Basic Information And Instructions For Control Unit Programming
          • Basic Information On Control Unit Programming
          • Basic Instructions For Control Unit Programming
        • General Preliminary Work
        • Basic Procedure For Control Unit Programming Using The PIWIS Tester
          • Information On The Procedure For Control Unit Programming
          • Control Unit Programming Using The "Programming" Menu
        • Control Unit Programming Using The "Campaign" Function In The Additional Menu On The PIWIS Tester
      • WM, 9X00IN Measurement Of Closed-Circuit Current
        • Tools
        • Tool
        • Preparatory Work On The Vehicle
        • Connecting The Measuring Device
        • Measurement
      • WM, 9X00IN Technical Values
        • Technical Values
          • Overview
          • 90 - Instruments
          • 91 - Radio, On-Board Computer, Park assist
          • 92 - Windscreen Wiper And Washer System
          • 94 - Lights, Lamps, Switches - Exterior
          • Additional Brake Light
          • Additional Brake Light - Spyder
          • 96 - Lights, Lamps, Switches - Interior, Anti-Theft Protection
          • 97 - Lines
          • 97 - Lines For Engine
          • DME Control Unit
          • PASM Control Unit
          • Parking Brake Control Unit
          • Relay Carrier In Right Luggage Compartment
  • Charging Systems
    • 27 Starter, Power Supply, Cruise Control 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 270419 - Removing And Installing Voltage Converter For Start/Stop
        • Component Information
          • Installation Position Of Voltage Converter For Start/Stop
        • Preliminary Work
        • Removing And Installing Voltage Converter For Start/Stop
        • Subsequent Work
      • WM, 270519 - Removing And Installing Battery Sensor
        • Technical Values
        • Preliminary Work
        • Removing And Installing Battery Sensor
        • Subsequent Work
      • WM, 270555 - Replacing Battery Sensor
        • Replacing Battery Sensor
      • WM, 270601 - Checking The Battery
        • Technical Values
        • Battery And Handling Instructions
          • Notes
          • Visual Inspection Of Battery
          • Open-Circuit Voltage Measurement
          • Battery Load Test
          • Charging The Battery
      • WM, 270619 - Removing And Reinstalling Battery
        • Technical Values
        • Preliminary Work
        • Removing Battery
        • Installing Battery
        • Subsequent Work
      • WM, 270655 - Replacing Battery
        • Preliminary Work
        • Replacing Battery
        • Subsequent Work
      • WM, 2706IN - External Power Connection, Jump-Lead Starting
        • Information
          • External Power Connection, Jump-Lead Starting
      • WM, 272219 - Removing And Installing Generator
        • Technical Values
        • Preliminary Work
        • Removing The Generator
        • Installing Generator
        • Subsequent Work
      • WM, 276019 - Removing And Installing Starter
        • Technical Values
        • Preliminary Work
        • Removing The Starter
        • Installing The Starter
        • Subsequent Work
      • WM, 278515 - Adjusting Distance Measuring Sensor Control Unit
        • Tools
        • Preliminary Work
          • Distance Measuring Sensor Control Unit Needs To Be Adjusted
          • Requirements For Testing And Adjustment
          • Setting Up The Measuring System
          • Preparation For Adjusting Distance Measuring Sensor
        • Adjusting Distance Measuring Sensor Control Unit
          • Adjusting Control Unit For Distance Measuring Sensor
        • Subsequent Work
      • WM, 278519 - Removing And Installing Distance Measuring Sensor Control Unit
        • Technical Values
        • Distance Measuring Sensor Control Unit
          • Removing Control Unit For Distance Measuring Sensor
        • Installing Distance Measuring Sensor Control Unit
          • Installing Control Unit For Distance Measuring Sensor
        • Subsequent Work
      • WM, 278555 - Replacing Distance Measuring Sensor Control Unit
        • Tools
        • Preliminary Work
        • Programming Distance Measuring Sensor Control Unit
          • Programming Control Unit For Distance Measuring Sensor
        • Automatically Coding Distance Measuring Sensor Control Unit
          • Coding Control Unit For Distance Measuring Sensor Automatically
  • Component Locations
    • COMPONENT LOCATIONS - 718 BOXSTER,718 CAYMAN (1 Of 2)
      • 10 Engine - Crankcase, Suspension 2.0L - 982 - BOXSTER/CAYMAN
      • 10 Engine - Crankcase, Suspension 2.5L - 982 - BOXSTER/CAYMAN
      • 19 Engine - Cooling 2.0L - 982 - BOXSTER/CAYMAN
      • 19 Engine - Cooling 2.5L - 982 - BOXSTER/CAYMAN
      • 1X Engine - General 2.0L - 982 - BOXSTER/CAYMAN
      • 1X Engine - General 2.5L - 982 - BOXSTER/CAYMAN
      • 20 Fuel Supply, Actuator 2.0L - 982 - BOXSTER/CAYMAN
      • 20 Fuel Supply, Actuator 2.5L - 982 - BOXSTER/CAYMAN
      • 21 Exhaust Gas Turbocharging 2.0L - 982 - BOXSTER/CAYMAN
      • 21 Exhaust Gas Turbocharging 2.5L - 982 - BOXSTER/CAYMAN
      • 24 Fuel System - Electronic Injection 2.0L - 982 - BOXSTER/CAYMAN
      • 24 Fuel System - Electronic Injection 2.5L - 982 - BOXSTER/CAYMAN
      • 26 Exhaust System 2.0L - 982 - BOXSTER/CAYMAN
      • 26 Exhaust System 2.5L - 982 - BOXSTER/CAYMAN
      • 27 Starter, Power Supply, Cruise Control 2.0L - 982 - BOXSTER/CAYMAN
      • 27 Starter, Power Supply, Cruise Control 2.5L - 982 - BOXSTER/CAYMAN
      • 28 Ignition System, PREGLOW System 2.0L - 982 - BOXSTER/CAYMAN
      • 28 Ignition System, PREGLOW System 2.5L - 982 - BOXSTER/CAYMAN
      • 2X Petrol, Exhaust, Engine-Electric - General 2.0L - 982 - BOXSTER/CAYMAN
      • 2X Petrol, Exhaust, Engine-Electric - General 2.5L - 982 - BOXSTER/CAYMAN
      • 30 Clutch, Actuation 2.0L - 982 - BOXSTER/CAYMAN
      • 30 Clutch, Actuation 2.5L - 982 - BOXSTER/CAYMAN
      • 37 Automatic Transmission - Actuator, Housing 2.0L - 982 - BOXSTER/CAYMAN
      • 37 Automatic Transmission - Actuator, Housing 2.5L - 982 - BOXSTER/CAYMAN
      • 40 Wheel Suspension Front Drive Shaft 2.0L - 982 - BOXSTER/CAYMAN
      • 40 Wheel Suspension Front Drive Shaft 2.5L - 982 - BOXSTER/CAYMAN
      • 42 Rear Wheel Suspension Drive Shaft 2.0L - 982 - BOXSTER/CAYMAN
      • 42 Rear Wheel Suspension Drive Shaft 2.5L - 982 - BOXSTER/CAYMAN
      • 43 Leveling System, Air Suspension, Damper Control 2.0L - 982 - BOXSTER/CAYMAN
      • 43 Leveling System, Air Suspension, Damper Control 2.5L - 982 - BOXSTER/CAYMAN
      • 44 Wheels, Tyres, Suspension Alignment 2.0L - 982 - BOXSTER/CAYMAN
      • 44 Wheels, Tyres, Suspension Alignment 2.5L - 982 - BOXSTER/CAYMAN
      • 45 Control System 2.0L - 982 - BOXSTER/CAYMAN
      • 45 Control System 2.5L - 982 - BOXSTER/CAYMAN
      • 46 Brakes - Brake Mechanism 2.0L - 982 - BOXSTER/CAYMAN
      • 46 Brakes - Brake Mechanism 2.5L - 982 - BOXSTER/CAYMAN
      • 48 Steering 2.0L - 982 - BOXSTER/CAYMAN
      • 48 Steering 2.5L - 982 - BOXSTER/CAYMAN
      • 55 - Lids, Flaps - 982 - BOXSTER/CAYMAN
      • 57 Front Door Central Locking - 982 - BOXSTER/CAYMAN
      • 70 Linings, Insulation - 982 - BOXSTER/CAYMAN
      • 72 Seat Frames - 982 - BOXSTER/CAYMAN
      • 74 Seat Cushions, Seat Covers - 982 - BOXSTER/CAYMAN
    • COMPONENT LOCATIONS -- 718 BOXSTER,718 CAYMAN (2 Of 2)
      • 74 Seat Cushions, Seat Covers - 982 - BOXSTER/CAYMAN
      • 80 Heater - 982 - BOXSTER/CAYMAN
      • 85 Ventilation - 982 - BOXSTER/CAYMAN
      • 87 Air Conditioning - 982 - BOXSTER/CAYMAN
      • 90 Instruments - 982 - BOXSTER/CAYMAN
      • 91 Radio, On-Board Computer Park Assist - 982 - BOXSTER/CAYMAN
      • 92 Windscreen Wiper/Washer System - 982 - BOXSTER/CAYMAN
      • 94 Lights, Lamps, Switches, Exterior - 982 - BOXSTER/CAYMAN
      • 96 Lights, Lamps, Switches-Interior, Anti-Theft Protection - 982 - BOXSTER/CAYMAN
      • 97 Lines - 982 - BOXSTER/CAYMAN
  • Fuses & Circuit Breakers
    • Fuses And Relays
      • Fuses and Relays
        • Main Fuse Box
        • Front Left Fuse box (2017-8)
        • Front Left Fuse box (2019-20)
        • Front Right Fuse Box
        • Relay Support 2
        • Relay Support (2017-9)
        • Relay Support (2020)
        • Fuse Assignment
  • Gauges
    • 90 Instruments -- 982 - BOXSTER/CAYMAN
      • WM, 900319 Removing And Installing Dashboard Insert
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Dashboard Insert
        • Subsequent Work
      • WM, 902219 Removing And Installing Stopwatch
        • Preliminary Work
        • Removing And Installing Stopwatch
        • Subsequent Work
      • WM, 902519 Removing And Installing Instrument Cluster
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Instrument Cluster
        • Subsequent Work
      • WM, 902555 Replacing Instrument Cluster
        • Replacing Instrument Cluster
      • WM, 903519 Removing And Installing Gateway Control Unit
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Gateway Control Unit
        • Subsequent Work
      • WM, 903555 Replacing Gateway Control Unit
        • Programming Gateway Control Unit
      • WM, 905019 Removing And Installing Horn
        • Component Information
          • Installation Position
        • Removing And Installing Horn
      • WM, 905819 Removing And Installing Plug Socket
        • Component Information
          • Information
          • Preliminary Work
            • Preliminary Work For Plug Socket In Right Footwell
          • Preliminary Work For Plug Socket In Centre Console
        • Removing And Installing Plug Socket
        • Subsequent Work
          • Subsequent Work For Plug Socket In Right Footwell
          • Subsequent Work For Plug Socket In Centre Console
      • WM, 906219 Removing And Installing Cigarette Lighter
        • Component Information
          • Installation Position Of Cigarette Lighter
        • Preliminary Work
        • Removing And Installing Cigarette Lighter
        • Subsequent Work
      • WM, 906419 Removing And Installing PCC/PVTS Control Unit
        • Preliminary Work
        • Removing Control Unit For Auxiliary Alarm System
        • Installing Control Unit For Auxiliary Alarm System
          • Installing Control Unit For Auxiliary Alarm System
        • Subsequent Work
      • WM, 906455 Replacing PCC/PVTS Control Unit
        • Replacing PCC/PVTS Control Unit
  • Motors, Switches, Relays
    • 9X - Electrical System - General -- 982 - BOXSTER/CAYMAN
      • WM, 9X00IN Basic Instructions And Procedure For Control Unit Programming Using The PIWIS Tester
        • Tools
        • Basic Information And Instructions For Control Unit Programming
          • Basic Information On Control Unit Programming
          • Basic Instructions For Control Unit Programming
        • General Preliminary Work
        • Basic Procedure For Control Unit Programming Using The PIWIS Tester
          • Information On The Procedure For Control Unit Programming
          • Control Unit Programming Using The "Programming" Menu
        • Control Unit Programming Using The "Campaign" Function In The Additional Menu On The PIWIS Tester
      • WM, 9X00IN Measurement Of Closed-Circuit Current
        • Tools
        • Tool
        • Preparatory Work On The Vehicle
        • Connecting The Measuring Device
        • Measurement
      • WM, 9X00IN Technical Values
        • Technical Values
          • Overview
          • 90 - Instruments
          • 91 - Radio, On-Board Computer, Park assist
          • 92 - Windscreen Wiper And Washer System
          • 94 - Lights, Lamps, Switches - Exterior
          • Additional Brake Light
          • Additional Brake Light - Spyder
          • 96 - Lights, Lamps, Switches - Interior, Anti-Theft Protection
          • 97 - Lines
          • 97 - Lines For Engine
          • DME Control Unit
          • PASM Control Unit
          • Parking Brake Control Unit
          • Relay Carrier In Right Luggage Compartment
  • 27 Starter, Power Supply, Cruise Control 2.0L -- 982 - BOXSTER/CAYMAN
    • WM, 270419 - Removing And Installing Voltage Converter For Start/Stop
      • Component Information
        • Installation Position Of Voltage Converter For Start/Stop
      • Preliminary Work
      • Removing And Installing Voltage Converter For Start/Stop
      • Subsequent Work
    • WM, 270519 - Removing And Installing Battery Sensor
      • Technical Values
      • Preliminary Work
      • Removing And Installing Battery Sensor
      • Subsequent Work
    • WM, 270555 - Replacing Battery Sensor
      • Replacing Battery Sensor
    • WM, 270601 - Checking The Battery
      • Technical Values
      • Battery And Handling Instructions
        • Notes
        • Visual Inspection Of Battery
        • Open-Circuit Voltage Measurement
        • Battery Load Test
        • Charging The Battery
    • WM, 270619 - Removing And Reinstalling Battery
      • Technical Values
      • Preliminary Work
      • Removing Battery
      • Installing Battery
      • Subsequent Work
    • WM, 270655 - Replacing Battery
      • Preliminary Work
      • Replacing Battery
      • Subsequent Work
    • WM, 2706IN - External Power Connection, Jump-Lead Starting
      • Information
        • External Power Connection, Jump-Lead Starting
    • WM, 272219 - Removing And Installing Generator
      • Technical Values
      • Preliminary Work
      • Removing The Generator
      • Installing Generator
      • Subsequent Work
    • WM, 276019 - Removing And Installing Starter
      • Technical Values
      • Preliminary Work
      • Removing The Starter
      • Installing The Starter
      • Subsequent Work
    • WM, 278515 - Adjusting Distance Measuring Sensor Control Unit
      • Tools
      • Preliminary Work
        • Distance Measuring Sensor Control Unit Needs To Be Adjusted
        • Requirements For Testing And Adjustment
        • Setting Up The Measuring System
        • Preparation For Adjusting Distance Measuring Sensor
      • Adjusting Distance Measuring Sensor Control Unit
        • Adjusting Control Unit For Distance Measuring Sensor
      • Subsequent Work
    • WM, 278519 - Removing And Installing Distance Measuring Sensor Control Unit
      • Technical Values
      • Distance Measuring Sensor Control Unit
        • Removing Control Unit For Distance Measuring Sensor
      • Installing Distance Measuring Sensor Control Unit
        • Installing Control Unit For Distance Measuring Sensor
      • Subsequent Work
    • WM, 278555 - Replacing Distance Measuring Sensor Control Unit
      • Tools
      • Preliminary Work
      • Programming Distance Measuring Sensor Control Unit
        • Programming Control Unit For Distance Measuring Sensor
      • Automatically Coding Distance Measuring Sensor Control Unit
        • Coding Control Unit For Distance Measuring Sensor Automatically
  • Wiring Diagrams
    • System Wiring Diagrams
      • Using lemon2025'S Wiring Diagrams
      • Active BODYWORKS
      • Air Conditioning
      • Anti-Lock Brakes
      • Anti-Theft
      • Body Control Modules
      • Computer Data Lines
      • Cooling Fan
      • Cruise Control
      • Defoggers
      • Electronic Power Steering
      • Electronic Suspension
      • Engine Performance
        • 2.0L Turbo
        • 2.5L Turbo
        • 4.0L
      • Exterior Lights
      • Ground Distribution
      • Headlights
      • Horn
      • Instrument Cluster
      • Interior Lights
      • Memory Systems
      • Navigation
      • Power Distribution
      • Power Door Locks
      • Power Mirrors
      • Power Seats
      • Power Top/Sunroof
      • Power Windows
      • Radio
      • Shift Interlock
      • Starting/Charging
      • Supplemental Restraints
      • Transmission
      • Trunk, Tailgate, Fuel Door
      • Warning Systems
      • Wiper/Washer
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
• Engine Mechanical
  • Blowers, Superchargers & Turbochargers
    • 21 Exhaust Gas Turbocharging 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 212419 - Removing And Installing Intake Manifold
        • Technical Values
        • Preliminary Work
        • Removing Intake Manifold
        • Installing Intake Manifold
        • Subsequent Work
      • WM, 213019 - Remove And Install Turbocharger
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Turbocharger
        • Installing Turbocharger
        • Subsequent Work
      • WM, 213519 - Removing And Installing Coolant Line
        • Technical Values
        • Preliminary Work
        • Removing Coolant Line
        • Installing Coolant Line
        • Subsequent Work
      • WM, 213919 - Removing And Installing Moulded Hose
        • Technical Values
        • Preliminary Work
        • Information
          • Component Overview
        • Removing Moulded Hose
        • Installing Moulded Hose
        • Subsequent Work
      • WM, 214119 - Removing And Installing Pressure Pipe
        • Preliminary Work
        • Removing Pressure Pipe
        • Installing Pressure Pipe
        • Subsequent Work
      • WM, 214219 - Removing And Installing Holder For Charge Air Cooler
        • Technical Values
        • Preliminary Work
        • Remove Holder For Charge Air Cooler
        • Install Holder For Charge Air Cooler
        • Subsequent Work
      • WM, 214309 - Service Position Of Charge Air Cooler
        • Preliminary Work
        • Detaching And Securing Charge Air Cooler (Service Position)
        • Subsequent Work
      • WM, 214319 - Removing And Installing Charge Air Cooler
        • Technical Values
        • Preliminary Work
        • Installing Charge Air Cooler
        • Subsequent Work
      • WM, 217119 - Removing And Installing Oil Feed Line (Pressure Line) For Turbocharger
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil Feed Line For Turbocharger
        • Installing Oil Feed Line For Turbocharger
        • Subsequent Work
      • WM, 217319 - Removing And Installing Turbocharger Vent Line
        • Technical Values
        • Preliminary Work
        • Removing Turbocharger Vent Line
        • Installing Turbocharger Vent Line
        • Subsequent Work
      • WM, 217519 - Removing And Installing Oil Tank
        • Technical Values
        • Preliminary Work
        • Remove Oil Tank
        • Installing Oil Tank
        • Subsequent Work
      • WM, 217819 - Removing And Installing Oil Return Line For Turbocharger
        • Technical Values
        • Preliminary Work
        • Removing Oil Return Line For Turbocharger
        • Subsequent Work
  • Cooling System (Mechanical)
    • 19 Engine - Cooling 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 190101 - Checking Cooling System
        • Tools
        • Checking Cooling System
          • Checking Engine Coolant Level And Antifreeze Content
          • Checking The Cooling System For Leaks
          • Checking Function Of Reservoir Cap
          • Cleaning Cooling Air Intakes
      • WM, 190107 - Bleeding The Cooling System
        • Preliminary Work
        • Bleeding The Cooling System
        • Subsequent Work
      • WM, 190129 - Cleaning The Cooling System
        • Preliminary Work
        • Cleaning The Cooling System
        • Subsequent Work
      • WM, 190819 - Removing And Installing Electric Fan
        • Technical Values
        • Preliminary Work
        • Removing And Installing Electric Fan
        • Subsequent Work
      • WM, 190819 - Removing And Installing Electric Fan In Engine Compartment
        • Technical Values
        • Component Information
          • Installation Position Of Electric Fan In Engine Compartment
        • Preliminary Work
        • Removing And Installing Electric Fan In Engine Compartment
        • Subsequent Work
      • WM, 192419 - Removing And Installing Air Guide
        • Preliminary Work
        • Removing And Installing Air Guide
          • Removing And Installing Air Guide For Middle Radiator
          • Removing And Installing Air Guide For Side Radiator
        • Subsequent Work
      • WM, 193817 - Draining And Filling Coolant
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Draining Coolant At The Radiator
        • Draining Coolant
          • Draining Coolant At The Radiator
          • Draining Coolant At The Coolant Regulator
        • Filling Coolant
        • Subsequent Work
          • Subsequent Work For Draining Coolant At The Radiator
      • WM, 194019 - Removing And Installing Coolant Reservoir
        • Technical Values
        • Preliminary Work
        • Removing Coolant Reservoir
        • Installing Coolant Reservoir
        • Subsequent Work
      • WM, 194519 - Removing And Installing Additional Coolant Pump
        • Technical Values
        • Preliminary Work
        • Removing And Installing Additional Coolant Pump
        • Subsequent Work
      • WM, 195019 - Removing And Installing Coolant Pump (With Housing)
        • Technical Values
        • Preliminary Work
        • Removing Coolant Pump
        • Installing Coolant Pump
        • Subsequent Work
      • WM, 195019 - Removing And Installing Coolant Pump
        • Technical Values
        • Preliminary Work
        • Removing Coolant Pump
        • Installing Coolant Pump
        • Subsequent Work
      • WM, 195319 - Removing And Installing Pulley
        • Technical Values
        • Preliminary Work
        • Removing Pulley
        • Installing Pulley
        • Subsequent Work
      • WM, 195519 - Removing And Installing Coolant Regulator Housing
        • Technical Values
        • Preliminary Work
        • Removing Coolant Regulator Housing
        • Installing Coolant Regulator Housing
        • Subsequent Work
      • WM, 195819 - Removing And Installing Coolant Regulator
        • Technical Values
        • Preliminary Work
        • Removing Coolant Regulator
        • Installing Coolant Regulator
        • Subsequent Work
      • WM, 195855 - Replacing Coolant Regulator Sealing Ring
        • Tools
        • Preliminary Work
        • Replacing Coolant Regulator Sealing Ring
        • Subsequent Work
      • WM, 195919 - Removing And Installing Coolant Distributor Housing
        • Technical Values
        • Preliminary Work
        • Removing Coolant Distributor Housing
        • Installing Coolant Distributor Housing
        • Subsequent Work
      • WM, 195955 - Replacing Coolant Distributor Housing
        • Technical Values
        • Preliminary Work
        • Replacing Coolant Distributor Housing
        • Subsequent Work
      • WM, 196419 - Removing And Installing Coolant Pipe
        • Technical Values
        • Preliminary Work
        • Removing Coolant Pipe
        • Installing Coolant Pipe
        • Subsequent Work
      • WM, 196419 - Removing And Installing Front Coolant Pipe At The Centre
        • Technical Values
        • Preliminary Work
        • Removing Front Coolant Pipe At The Centre
          • Removing Lower Front Coolant Pipe At The Centre
          • Removing Upper Front Coolant Pipe At The Centre
        • Installing Front Coolant Pipe At The Centre
          • Installing Lower Front Coolant Pipe At The Centre
        • Subsequent Work
      • WM, 196419 - Removing And Installing Front Left Coolant Pipe
        • Technical Values
        • Preliminary Work
        • Removing Front Left Coolant Pipe
        • Installing Front Left Coolant Pipe
        • Subsequent Work
      • WM, 196419 - Removing And Installing Front Right Coolant Pipe
        • Technical Values
        • Preliminary Work
        • Removing Front Right Coolant Pipe
        • Installing Front Right Coolant Pipe
        • Subsequent Work
      • WM, 196419 - Removing And Installing Centre Coolant Pipe At The Right
        • Technical Values
        • Preliminary Work
        • Removing Centre Coolant Pipe At The Right
        • Installing Centre Coolant Pipe At The Right
        • Subsequent Work
      • WM, 196419 - Removing And Installing Centre Coolant Pipe At The Left
        • Technical Values
        • Preliminary Work
        • Removing Centre Coolant Pipe At The Left
        • Installing Centre Coolant Pipe At The Left
        • Subsequent Work
      • WM, 196819 - Removing And Installing Directional-Control Valve For Thermal Management
        • Technical Values
        • Preliminary Work
        • Removing Directional-Control Valve For Thermal Management
        • Installing Directional-Control Valve For Thermal Management
        • Subsequent Work
      • WM, 197019 - Removing And Installing Radiator
        • Technical Values
        • Component Information
          • Installation Position Of Radiator Module
        • Preliminary Work
        • Removing And Installing Radiator
        • Subsequent Work
      • WM, 197019 - Removing And Installing Low-Temperature Cooler In Engine Compartment
        • Component Information
          • Installation Position Of Low-Temperature Cooler In Engine Compartment
        • Preliminary Work
        • Subsequent Work
      • WM, 197119 - Removing And Installing Change-Over Valve
        • Preliminary Work
        • Removing And Installing Change-Over Valve
        • Subsequent Work
      • WM, 197819 - Removing And Installing Coolant Temperature Sensor
        • Technical Values
        • Preliminary Work
        • Removing Coolant Temperature Sensor
        • Installing Coolant Temperature Sensor
        • Subsequent Work
      • WM, 197819 - Removing And Installing (Engine) Coolant Temperature Sensor
        • Technical Values
        • Preliminary Work
        • Removing Coolant Temperature Sensor
        • Installing Coolant Temperature Sensor
      • WM, 198019 - Removing And Installing Middle Radiator
        • Tools
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Middle Radiator
        • Subsequent Work
  • 26 Exhaust System 2.0L -- 982 - BOXSTER/CAYMAN
    • WM, 260119 - Removing And Installing Exhaust System
      • Technical Values
      • Preliminary Work
      • Removing Exhaust System
      • Installing Exhaust System
      • Subsequent Work
    • WM, 260219 - Removing And Installing Acoustic Simulator
      • Technical Values
        • Overview
        • Exhaust System
      • Preliminary Work
      • Removing Acoustic Simulator
      • Installing Acoustic Simulator
      • Subsequent Work
    • WM, 260619 - Removing And Installing Pulse Sender For Interior Acoustics
      • Technical Values
      • Preliminary Work
      • Removing Pulse Sender For Interior Acoustics
      • Installing Pulse Sender For Interior Acoustics
      • Subsequent Work
    • WM, 261019 - Removing And Installing Exhaust Manifold
      • Technical Values
      • Preliminary Work
      • Removing Exhaust Manifold
      • Installing Exhaust Manifold
      • Subsequent Work
    • WM, 26121953 - Removing And Installing Heat Shield (On Turbocharger)
      • Technical Values
      • Preliminary Work
      • Removing Heat Shield (On Turbocharger)
      • Installing Heat Shield (On Turbocharger)
      • Subsequent Work
    • WM, 261219 - Removing And Installing Heat Shield (On Catalytic Converter/Particle Filter)
      • Technical Values
      • Preliminary Work
        • Preliminary Work For Heat Shield On Catalytic Converter
        • Preliminary Work For Heat Shield On Particle Filter (With Catalytic Converter)
      • Removing Heat Shield (On Catalytic Converter)
      • Removing Heat Shield On Particle Filter (With Catalytic Converter)
      • Installing Heat Shield (On Catalytic Converter)
      • Installing Heat Shield On Particle Filter (With Catalytic Converter)
      • Subsequent Work
        • Subsequent Work For Heat Shield On Catalytic Converter
        • Subsequent Work For Heat Shield On Particle Filter (With Catalytic Converter)
    • WM, 261519 - Removing And Installing Heat Shield
      • Technical Values
      • Preliminary Work
      • Removing Heat Shield
      • Installing Heat Shield
      • Subsequent Work
    • WM, 261819 - Removing And Installing Differential Pressure Sensor For Particle Filter
      • Tools
      • Preliminary Work
      • Removing Differential Pressure Sensor For Particle Filter
      • Installing Differential Pressure Sensor For Particle Filter
      • Subsequent Work
    • WM, 263319 - Removing And Installing Rear Muffler
      • Technical Values
      • Preliminary Work
        • Preliminary Work For Rear Silencer, Cylinders 3 And 4
      • Removing Rear Muffler
        • Removing Both Rear Silencers
        • Removing One Rear Silencer
      • Installing Rear Muffler
        • Repair Solution: Replacing Threaded Bolts On Two-Hole Flange
        • Installing Both Rear Silencers
        • Installing One Rear Silencer
      • Subsequent Work
        • Subsequent Work For Rear Silencer, Cylinders 3 And 4
    • WM, 263519 - Removing And Installing Tailpipe Cover
      • Technical Values
      • Preliminary Work
      • Removing Tailpipe Cover
      • Installing Tailpipe Cover
      • Subsequent Work
        • Adjusting Tailpipe Cover
    • WM, 265119 - Removing And Installing Actuator For Exhaust Flap
      • Technical Values
      • Technical Values - Exhaust System
        • Assembly Overview - Exhaust Manifold
        • Assembly Overview - Catalytic Converter/Exhaust Manifold Holder
        • Exhaust System
        • Heat Shields On Exhaust System, Heat Protection
        • Heat Shield On Catalytic Converter With Particle Filter
        • Catalytic Converter With Particle Filter
      • Removing Exhaust Flap Actuator
        • Remove Control Box
      • Installing Exhaust Flap Actuator
        • Install Control Box
    • WM, 267319 - Removing And Installing Catalytic Converter
      • Technical Values
      • Preliminary Work
      • Removing Catalytic Converter
      • Installing Catalytic Converter
      • Subsequent Work
  • Fuel System
    • 20 Fuel Supply, Actuator 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 200101 - Checking Fuel System (High-Pressure Side) For Leaks
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
        • Checking Fuel System For Leaks
          • Component Overview
          • Leak Test
          • Approved Test Media
        • Subsequent Work
      • WM, 200107 - Bleeding Fuel System On High-Pressure Side - First Start Function
        • Information
          • Explanation Of First Start Function
        • Bleeding High-Pressure System
          • Performing First Start Function
      • WM, 200201 - Checking Fuel Pressure (Low-Pressure System)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Fuel Pressure
        • Subsequent Work
      • WM, 200301 - Checking Fuel Quality - Petrol
        • Tools
        • Tools And Materials
        • Checking Fuel Quality
      • WM, 200317 - Draining And Filling Fuel
        • Tools
        • Tools And Materials
          • Notes
          • Additional Information On Recommended Fuel Transfer Units
        • Draining Fuel
          • Draining The Fuel Tank Using PIWIS Tester 3
          • Draining The Fuel Tank Using Fuel Transfer Unit
        • Filling Fuel
          • Filling Fuel After Draining Using PIWIS Tester 3
          • Filling Fuel Using Fuel Transfer Unit
      • WM, 200419 - Removing And Installing Low-Pressure Sensor
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Low-Pressure Sensor
        • Installing Low-Pressure Sensor
        • Subsequent Work
      • WM, 200719 - Removing And Installing Filler Neck
        • Technical Values
        • Preliminary Work
        • Removing Filler Neck
        • Installing Filler Neck
        • Subsequent Work
      • WM, 201001 - Leak Test On Fuel Tank
        • Leak Test
          • Leak Test On Fuel Tank
      • WM, 201019 - Removing And Installing Fuel Tank
        • Technical Values
        • Information
          • Component Overview - Fuel Tank
        • Preliminary Work
        • Removing And Installing Fuel Tank
          • Remove Fuel Tank
          • Installing Fuel Tank
        • Subsequent Work
      • WM, 201515 - Calibrating Fuel Level Sender
        • Calibrating Fuel Level Sender
      • WM, 201519 - Removing And Installing Fuel-Level Sensor
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Fuel-Level Sensor
        • Installing Fuel-Level Sensor
        • Subsequent Work
      • WM, 201719 - Removing And Installing Purge-Air Line
        • Technical Values
        • Preliminary Work
        • Removing Purge-Air Line
        • Installing Purge-Air Line
        • Subsequent Work
      • WM, 202319 - Removing And Installing Tank Vent
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Tank Vent
          • Removing Tank Vent Valve
        • Installing Tank Vent
        • Subsequent Work
      • WM, 20251900 - Removing And Installing Carbon Canister Without Leakage Diagnosis Unit
        • Technical Values
        • Preliminary Work
        • Removing Carbon Canister
        • Installing Carbon Canister
        • Subsequent Work
      • WM, 20251903 - Removing And Installing Carbon Canister With Leakage Diagnosis Unit
        • Technical Values
        • Preliminary Work
        • Removing Carbon Canister
        • Installing Carbon Canister
        • Subsequent Work
      • WM, 203819 - Removing And Installing Supply Line (Underbody)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Supply Line (Underbody)
        • Installing Supply Line (Underbody)
        • Subsequent Work
      • WM, 203819 - Removing And Installing Supply Line (Engine)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Supply Line (Engine)
        • Installing Supply Line (Engine)
        • Subsequent Work
      • WM, 204819 - Removing And Installing Leakage Diagnosis Unit
        • Technical Values
        • Preliminary Work
        • Removing Leakage Diagnosis Unit
        • Installing Leakage Diagnosis Unit
        • Subsequent Work
      • WM, 206519 - Removing And Installing Fuel Pump Relay
        • Tools
        • Preliminary Work
        • Removing And Installing Fuel Pump Relay
        • Subsequent Work
      • WM, 206601 - Checking Fuel Pump Delivery Rate
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Fuel Pump Delivery Rate
        • Subsequent Work
      • WM, 206619 - Removing And Installing Fuel Pump
        • Preliminary Work
          • Notes
          • Removing Fuel Pump
        • Installing Fuel Pump
        • Subsequent Work
      • WM, 207019 - Removing And Installing Control Unit For Fuel Pump
        • Technical Values
        • Preliminary Work
        • Removing And Installing Control Unit For Fuel Pump
        • Subsequent Work
      • WM, 208019 - Removing And Installing Accelerator Pedal
        • Technical Values
        • Removing And Installing Accelerator Pedal
          • Removing Accelerator Pedal
          • Installing Accelerator Pedal
    • 24 Fuel System - Electronic Injection 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 240919 - Removing And Installing High-Pressure Sensor
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing High-Pressure Sensor
        • Installing High-Pressure Sensor
        • Subsequent Work
      • WM, 242419 - Removing And Installing Air-Cleaner Element
        • Preliminary Work
        • Removing Air-Cleaner Element
        • Installing Air-Cleaner Element
        • Subsequent Work
      • WM, 242519 - Removing And Installing Air Cleaner Housing
        • Preliminary Work
        • Removing Air Cleaner Housing
        • Installing Air Cleaner Housing
        • Subsequent Work
      • WM, 243020 - Removing And Installing Fuel Collection Pipe
        • Tools
        • Technical Values
        • Information
          • Component Information
        • Preliminary Work
        • Removing Fuel Collection Pipe
        • Installing Fuel Collection Pipe
        • Subsequent Work
      • WM, 244019 - Removing And Installing Fuel Injector
        • Tools
        • Preliminary Work
        • Removing Fuel Injector
        • Installing Fuel Injector
        • Subsequent Work
      • WM, 244219 - Removing And Installing Throttle Housing
        • Technical Values
        • Preliminary Work
        • Removing Throttle Housing
        • Installing Throttle Housing
        • Subsequent Work
      • WM, 244229 - Cleaning Throttle Housing (China)
        • Preliminary Work
        • Cleaning Throttle Housing
        • Subsequent Work
      • WM, 244601 - Checking Intake-Air Distributor For Leaks
        • Tools
        • Preliminary Work
        • Checking Intake-Air Distributor For Leaks
        • Subsequent Work
      • WM, 244619 - Removing And Installing Centre Intake-Air Distributor
        • Preliminary Work
        • Removing Centre Intake-Air Distributor
        • Installing Centre Intake-Air Distributor
        • Subsequent Work
      • WM, 244619 - Removing And Installing Intake-Air Distributor
        • Technical Values
        • Preliminary Work
        • Removing Intake-Air Distributor
        • Installing Intake-Air Distributor
        • Subsequent Work
      • WM, 246319 - Removing And Installing High-Pressure Pump
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing High-Pressure Pump
        • Installing High-Pressure Pump
        • Subsequent Work
      • WM, 246919 - Removing And Installing Oxygen Sensor Upstream Of Catalytic Converter
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oxygen Sensor Upstream Of Catalytic Converter
          • Removing Oxygen Sensor Upstream Of Catalytic Converter For Cylinders 3-4 (Left)
          • Removing Oxygen Sensor Upstream Of Catalytic Converter For Cylinders 1-2 (Right)
        • Installing Oxygen Sensor Downstream Of Catalytic Converter
        • Subsequent Work
      • WM, 247019 - Removing And Installing Digital Engine Electronics (DME) Control Unit
        • Tools
        • Component Information
          • Installation Position Of DME Control Unit
        • Preliminary Work
        • Removing And Installing DME Control Unit
      • WM, 247055 - Replacing DME Control Unit
        • Tools
        • Replacing DME Control Unit
          • Replacing DME Control Unit (Not For GT4)
        • Subsequent Work
      • WM, 247319 - Removing And Installing Oxygen Sensor Downstream Of Catalytic Converter
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oxygen Sensor Downstream Of Catalytic Converter
        • Installing Oxygen Sensor Downstream Of Catalytic Converter
        • Subsequent Work
      • WM, 248019 - Removing And Installing Intake Pipe Pressure Sensor
        • Preliminary Work
        • Removing Intake Pipe Pressure Sensor
        • Installing Intake Pipe Pressure Sensor
        • Subsequent Work
      • WM, 249019 - Removing And Installing Fuel Line
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Fuel Line
        • Installing Fuel Line
        • Subsequent Work
  • Lubrication System
    • 17 Engine - Lubrication 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 170101 - Checking Engine-Oil Level
        • Checking Engine-Oil Level
        • Checking Engine-Oil Level Using The PIWIS Tester
      • WM, 170117 - Draining And Filling In Engine Oil
        • Technical Values
        • Preliminary Work
        • Drain Engine Oil
        • Filling In Engine Oil
        • Subsequent Work
      • WM, 170301 - Checking Engine Oil Pressure
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Engine Oil Pressure
        • Subsequent Work
      • WM, 170419 - Removing And Installing Oil-Pressure Sender
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil-Pressure Sender
        • Installing Oil-Pressure Sender
        • Subsequent Work
      • WM, 170919 - Removing And Installing Oil-Level Sender
        • Technical Values
        • Preliminary Work
        • Removing Oil-Level Sender
        • Installing Oil-Level Sender
        • Subsequent Work
      • WM, 171519 - Removing And Installing Oil Filler Neck
        • Technical Values
        • Preliminary Work
          • Preliminary Work On Luggage Compartment Side
          • Preliminary Work On Engine Compartment Side
        • Removing Oil Filler Neck
          • Removing Oil Filler Neck On Luggage Compartment Side
          • Removing Oil Filler Neck On Engine Compartment Side
        • Installing Oil Filler Neck
        • Subsequent Work
          • Subsequent Work On Luggage Compartment Side
          • Subsequent Work On Engine Compartment Side
      • WM, 172019 - Removing And Reinstalling Oil Pump
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil Pump
        • Installing Oil Pump
        • Subsequent Work
      • WM, 172619 - Removing And Installing Oil Pressure Control Valve
        • Technical Values
        • Preliminary Work
        • Removing Oil Pressure Control Valve
        • Installing Oil Pressure Control Valve
        • Subsequent Work
      • WM, 173055 - Changing Oil Filter
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil Filter
        • Installing Oil Filter
        • Subsequent Work
      • WM, 174019 - Removing And Installing Oil/Water Heat EXCHANGER
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil/Water Heat EXCHANGER
        • Installing Oil/Water Heat EXCHANGER
        • Subsequent Work
      • WM, 175019 - Removing And Installing Oil Pan (Upper Part)
        • Technical Values
        • Preliminary Work
        • Removing Oil Pan (Upper Part)
        • Installing Oil Pan (Upper Part)
        • Subsequent Work
      • WM, 175019 - Removing And Installing Oil Pan (Lower Part)
        • Technical Values
        • Preliminary Work
        • Removing Oil Pan
        • Installing Oil Pan
        • Subsequent Work
  • Mechanical
    • 10 Engine - Crankcase, Suspension 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 100119 - Removing And Installing Engine
        • Tools
        • Technical Values
        • Preliminary Work
        • Remove Engine
        • Installing Motor
        • Subsequent Work
      • WM, 1001IN - Position And Marking Of Engine Number
        • Tools
        • Information
          • Position Of Engine Number
          • Marking Engine Number
      • WM, 1001IN - Lowering The Engine To Complete Other Work
        • Tools
        • Technical Values
        • Lowering And Securing The Engine
      • WM, 1001IN - Tools For Removing/Installing Units And Working On Assembly Support
        • Tools
        • Information
          • Tools And Setup For Removing Units
          • Removing Transmission From Engine And Mounting Transmission On Engine
          • Transporting The Engine In The Workshop
          • Supporting Transmission On Assembly Support
      • WM, 1001Z1 - Disassembling Engine
        • Tools
        • Technical Values
        • Information
          • Component Overviews - Engine
        • Preliminary Work
        • Disassembling Engine
          • New Tools
      • WM, 1001Z2 - Assembling Engine
        • Tools
        • Assembling Engine
        • Subsequent Work
      • WM, 101802 - Checking Pressure Loss Of Cylinders
        • Tools
        • Technical Values
        • Information
          • Information And Tools
        • Preliminary Work
        • Checking Pressure Loss Of Cylinders
        • Subsequent Work
      • WM, 103019 - Removing And Installing Engine Carrier (Bracket)
        • Technical Values
        • Preliminary Work
        • Removing Engine Carrier (Bracket)
        • Installing Engine Carrier (Bracket)
        • Subsequent Work
      • WM, 103519 - Removing And Installing Engine Mount
        • Technical Values
        • Preliminary Work
        • Removing Engine Mounting
        • Installing Engine Mounting
        • Subsequent Work
      • WM, 105219 - Removing And Installing Positive Crankcase Ventilation Line
        • Preliminary Work
          • Preliminary Work For Long Section
          • Preliminary Work For Short Section
        • Removing Positive Crankcase Ventilation Line
          • Removing Positive Crankcase Ventilation Line (Long Section)
          • Removing Positive Crankcase Ventilation Line (Short Section)
        • Installing Positive Crankcase Ventilation Line
        • Subsequent Work
          • Subsequent Work For Long Section
      • WM, 105519 - Removing And Installing Oil Separator
        • Technical Values
        • Preliminary Work
        • Removing Oil Separator
        • Installing Oil Separator
        • Subsequent Work
    • 13 Engine - Crank Drive, Pistons 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 131020 - Removing And Installing Pistons
        • Tools
        • Technical Values
        • Removing Pistons
          • Removing Pistons - Cylinders 1-2
          • Removing Pistons - Cylinders 3-4
          • Pre-Assembly Of Pistons And Connecting Rods
        • Installing Pistons
          • Installing Pistons - Cylinders 3-4
          • Installing Pistons For Cylinders 1-2
      • WM, 134837 - Disassembling And Assembling Crankshaft
        • Tools
        • Technical Values
        • Disassembling Crankshaft
        • Assembling Crankshaft
        • Subsequent Work
      • WM, 135955 - Replacing Crankshaft Sealing Ring - Flywheel Side
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Crankshaft Sealing Ring
        • Installing Crankshaft Sealing Ring
        • Subsequent Work
      • WM, 136019 - Removing And Installing Flywheel For Double Clutch Transmission
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Flywheel
        • Installing Flywheel
        • Subsequent Work
          • Notes
          • Subsequent Work For Diagnostic Scopes
      • WM, 136019 - Removing And Installing Flywheel
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Flywheel
        • Installing Flywheel
        • Subsequent Work
          • Notes
          • Subsequent Work For Diagnostic Scopes
      • WM, 137319 - Removing And Installing Belt TENSIONER
        • Technical Values
        • Preliminary Work
        • Removing Belt TENSIONER
        • Replacing TENSIONER
        • Installing Belt TENSIONER
        • Subsequent Work
      • WM, 137455 - Replacing Crankshaft Sealing Ring - Belt Side
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Crankshaft Sealing Ring
        • Installing Crankshaft Sealing Ring
        • Subsequent Work
      • WM, 137519 - Removing And Installing Vibration Damper (2.0 L)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Vibration Damper
        • Installing Vibration Damper
        • Subsequent Work
      • WM, 137719 - Removing And Installing Deflection Roller
        • Technical Values
        • Preliminary Work
        • Removing Deflection Roller
        • Installing Deflection Roller
        • Subsequent Work
      • WM, 137801 - Checking Drive Belt
        • Preliminary Work
        • Checking Drive Belt
        • Subsequent Work
      • WM, 137819 - Removing And Installing Drive Belt
        • Preliminary Work
        • Removing Drive Belt
        • Installing Drive Belt
        • Subsequent Work
      • WM, 138219 - Removing And Installing TENSIONING Roller
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing TENSIONING Roller
        • Installing TENSIONING Roller
        • Subsequent Work
    • 15 Engine - Cylinder Head, Valve Drive 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 150520 - Removing And Installing Camshafts (Includes Setting Timing)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Camshafts
        • Installing Camshafts
          • Component Markings And Distinguishing Features
          • Installing Camshafts And Setting Timing
        • Subsequent Work
      • WM, 153619 - Removing And Installing Chain TENSIONER
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Cylinder Bank 3 And 4
        • Removing Chain TENSIONER
          • Removing Chain Tensioner For Cylinder Bank 3 And 4
          • Removing Chain Tensioner For Cylinder Bank 1 And 2
        • Installing Chain TENSIONER
        • Subsequent Work
          • Subsequent Work For Cylinder Bank 3 And 4
        • Subsequent Work For Cylinder Bank 1 And 2
      • WM, 153919 - Removing And Installing Actuator For Camshaft Control
        • Technical Values
        • Preliminary Work
        • Removing Actuator For Camshaft Control
        • Installing Actuator For Camshaft Control
        • Subsequent Work
      • WM, 155519 - Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment
        • Technical Values
        • Removing Solenoid Hydraulic Valve For Valve Lift Adjustment
        • Installing Solenoid Hydraulic Valve For Valve Lift Adjustment
      • WM, 157019 - Removing And Installing Cylinder Heads
        • Technical Values
        • Preliminary Work
        • Removing Cylinder Head
        • Installing Cylinder Head
        • Subsequent Work
      • WM, 157037 - Disassembling And Assembling Cylinder Head
        • Tools
        • Preliminary Work
        • Disassembling Cylinder Head
          • Notes
          • Removing Valve-Stem Seal
          • Installing Valve-Stem Seals
        • Assembling Cylinder Head
        • Subsequent Work
      • WM, 158219 - Remove And Install The Cylinder Head Cover
        • Tools
        • Technical Values
        • Preliminary Work
        • Remove The Cylinder Head Cover
          • Removing Cylinder Head Cover (Bank 1-2)
        • Install The Cylinder Head Cover
          • Installing Cylinder Head Cover (Bank 1-2)
          • Installing Cylinder Head Cover (Bank 3-4)
        • Subsequent Work
    • 1X Engine - General 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 1X00IN - Technical Values - Engine
        • Technical Values
        • Technical Values - Engine - Crankcase, Suspension
          • Notes
          • Positive Crankcase Ventilation Lines
        • Technical Values - Engine - Crank Drive, Pistons
          • Assembly Overview - Pistons
          • Crankshaft, Belt Drive, Belt Tensioner, Flywheel
        • Technical Values - Engine - Cylinder Head, Valve Drive
          • Cylinder Head
          • Assembly Overview - Camshafts
          • Assembly Overview - Cylinder Head Cover
          • Hydraulic Valves, Actuators - Overview
          • Engine Mount - Overview
        • Technical Values - Engine - Lubrication
          • Assembly Overview - Oil Pump
          • Assembly Overview - Oil Pan
          • Assembly Overview - Oil Separator, Oil-Filter Console, Heat Exchanger
          • Oil Filling
        • Technical Values - Engine - Cooling System
          • Engine - Cooling System
          • Assembly Overview - Coolant Regulator Housing
          • Regulated Coolant Pump With Coolant Pipe (Thermal Management)
          • Assembly Overview - Cooler, Coolant Pipes, Reservoir, Additional Coolant Pump, Cooling-Air Flaps
          • Low-Temperature System For Charge-Air Cooling
  • 27 Starter, Power Supply, Cruise Control 2.0L -- 982 - BOXSTER/CAYMAN
    • WM, 270419 - Removing And Installing Voltage Converter For Start/Stop
      • Component Information
        • Installation Position Of Voltage Converter For Start/Stop
      • Preliminary Work
      • Removing And Installing Voltage Converter For Start/Stop
      • Subsequent Work
    • WM, 270519 - Removing And Installing Battery Sensor
      • Technical Values
      • Preliminary Work
      • Removing And Installing Battery Sensor
      • Subsequent Work
    • WM, 270555 - Replacing Battery Sensor
      • Replacing Battery Sensor
    • WM, 270601 - Checking The Battery
      • Technical Values
      • Battery And Handling Instructions
        • Notes
        • Visual Inspection Of Battery
        • Open-Circuit Voltage Measurement
        • Battery Load Test
        • Charging The Battery
    • WM, 270619 - Removing And Reinstalling Battery
      • Technical Values
      • Preliminary Work
      • Removing Battery
      • Installing Battery
      • Subsequent Work
    • WM, 270655 - Replacing Battery
      • Preliminary Work
      • Replacing Battery
      • Subsequent Work
    • WM, 2706IN - External Power Connection, Jump-Lead Starting
      • Information
        • External Power Connection, Jump-Lead Starting
    • WM, 272219 - Removing And Installing Generator
      • Technical Values
      • Preliminary Work
      • Removing The Generator
      • Installing Generator
      • Subsequent Work
    • WM, 276019 - Removing And Installing Starter
      • Technical Values
      • Preliminary Work
      • Removing The Starter
      • Installing The Starter
      • Subsequent Work
    • WM, 278515 - Adjusting Distance Measuring Sensor Control Unit
      • Tools
      • Preliminary Work
        • Distance Measuring Sensor Control Unit Needs To Be Adjusted
        • Requirements For Testing And Adjustment
        • Setting Up The Measuring System
        • Preparation For Adjusting Distance Measuring Sensor
      • Adjusting Distance Measuring Sensor Control Unit
        • Adjusting Control Unit For Distance Measuring Sensor
      • Subsequent Work
    • WM, 278519 - Removing And Installing Distance Measuring Sensor Control Unit
      • Technical Values
      • Distance Measuring Sensor Control Unit
        • Removing Control Unit For Distance Measuring Sensor
      • Installing Distance Measuring Sensor Control Unit
        • Installing Control Unit For Distance Measuring Sensor
      • Subsequent Work
    • WM, 278555 - Replacing Distance Measuring Sensor Control Unit
      • Tools
      • Preliminary Work
      • Programming Distance Measuring Sensor Control Unit
        • Programming Control Unit For Distance Measuring Sensor
      • Automatically Coding Distance Measuring Sensor Control Unit
        • Coding Control Unit For Distance Measuring Sensor Automatically
• Engine Performance
  • Emissions
    • Emission Applications
      • Emission Applications
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • State Emission Standards - Diesel
      • ARIZONA
      • Colorado
      • CONNECTICUT
      • IDAHO
      • KENTUCKY
      • MASSACHUSETTS
      • New YORK
      • OHIO
      • RHODE Island
      • UTAH
      • WASHINGTON
    • State Emission Standards - Gas
      • ALASKA
      • ARIZONA
      • CALIFORNIA
        • California Emission Standards ASM Tests
        • Legend
        • Pass/Fail Emission Standards = A+B / VTW
      • Colorado
      • CONNECTICUT
      • DELAWARE
      • District Of COLUMBIA
      • GEORGIA
      • IDAHO
      • ILLINOIS
      • INDIANA
      • KENTUCKY
      • MARYLAND
      • MASSACHUSETTS
      • MISSOURI
      • NEVADA
      • New Jersey
      • New MEXICO
      • New YORK
      • North CAROLINA
      • OHIO
      • OREGON
      • PENNSYLVANIA
      • RHODE Island
      • TENNESSEE
      • TEXAS
      • UTAH
      • VIRGINIA
      • WASHINGTON
      • WISCONSIN
      • U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
      • U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
      • U.S. EPA Im240 Emission Standards
        • Start-Up Standards
        • Final Standards
  • Fuel Delivery
    • 20 Fuel Supply, Actuator 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 200101 - Checking Fuel System (High-Pressure Side) For Leaks
        • Tools
        • Technical Values
        • Preliminary Work
        • Information
        • Checking Fuel System For Leaks
          • Component Overview
          • Leak Test
          • Approved Test Media
        • Subsequent Work
      • WM, 200107 - Bleeding Fuel System On High-Pressure Side - First Start Function
        • Information
          • Explanation Of First Start Function
        • Bleeding High-Pressure System
          • Performing First Start Function
      • WM, 200201 - Checking Fuel Pressure (Low-Pressure System)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Fuel Pressure
        • Subsequent Work
      • WM, 200301 - Checking Fuel Quality - Petrol
        • Tools
        • Tools And Materials
        • Checking Fuel Quality
      • WM, 200317 - Draining And Filling Fuel
        • Tools
        • Tools And Materials
          • Notes
          • Additional Information On Recommended Fuel Transfer Units
        • Draining Fuel
          • Draining The Fuel Tank Using PIWIS Tester 3
          • Draining The Fuel Tank Using Fuel Transfer Unit
        • Filling Fuel
          • Filling Fuel After Draining Using PIWIS Tester 3
          • Filling Fuel Using Fuel Transfer Unit
      • WM, 200419 - Removing And Installing Low-Pressure Sensor
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Low-Pressure Sensor
        • Installing Low-Pressure Sensor
        • Subsequent Work
      • WM, 200719 - Removing And Installing Filler Neck
        • Technical Values
        • Preliminary Work
        • Removing Filler Neck
        • Installing Filler Neck
        • Subsequent Work
      • WM, 201001 - Leak Test On Fuel Tank
        • Leak Test
          • Leak Test On Fuel Tank
      • WM, 201019 - Removing And Installing Fuel Tank
        • Technical Values
        • Information
          • Component Overview - Fuel Tank
        • Preliminary Work
        • Removing And Installing Fuel Tank
          • Remove Fuel Tank
          • Installing Fuel Tank
        • Subsequent Work
      • WM, 201515 - Calibrating Fuel Level Sender
        • Calibrating Fuel Level Sender
      • WM, 201519 - Removing And Installing Fuel-Level Sensor
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Fuel-Level Sensor
        • Installing Fuel-Level Sensor
        • Subsequent Work
      • WM, 201719 - Removing And Installing Purge-Air Line
        • Technical Values
        • Preliminary Work
        • Removing Purge-Air Line
        • Installing Purge-Air Line
        • Subsequent Work
      • WM, 202319 - Removing And Installing Tank Vent
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Tank Vent
          • Removing Tank Vent Valve
        • Installing Tank Vent
        • Subsequent Work
      • WM, 20251900 - Removing And Installing Carbon Canister Without Leakage Diagnosis Unit
        • Technical Values
        • Preliminary Work
        • Removing Carbon Canister
        • Installing Carbon Canister
        • Subsequent Work
      • WM, 20251903 - Removing And Installing Carbon Canister With Leakage Diagnosis Unit
        • Technical Values
        • Preliminary Work
        • Removing Carbon Canister
        • Installing Carbon Canister
        • Subsequent Work
      • WM, 203819 - Removing And Installing Supply Line (Underbody)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Supply Line (Underbody)
        • Installing Supply Line (Underbody)
        • Subsequent Work
      • WM, 203819 - Removing And Installing Supply Line (Engine)
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Supply Line (Engine)
        • Installing Supply Line (Engine)
        • Subsequent Work
      • WM, 204819 - Removing And Installing Leakage Diagnosis Unit
        • Technical Values
        • Preliminary Work
        • Removing Leakage Diagnosis Unit
        • Installing Leakage Diagnosis Unit
        • Subsequent Work
      • WM, 206519 - Removing And Installing Fuel Pump Relay
        • Tools
        • Preliminary Work
        • Removing And Installing Fuel Pump Relay
        • Subsequent Work
      • WM, 206601 - Checking Fuel Pump Delivery Rate
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking Fuel Pump Delivery Rate
        • Subsequent Work
      • WM, 206619 - Removing And Installing Fuel Pump
        • Preliminary Work
          • Notes
          • Removing Fuel Pump
        • Installing Fuel Pump
        • Subsequent Work
      • WM, 207019 - Removing And Installing Control Unit For Fuel Pump
        • Technical Values
        • Preliminary Work
        • Removing And Installing Control Unit For Fuel Pump
        • Subsequent Work
      • WM, 208019 - Removing And Installing Accelerator Pedal
        • Technical Values
        • Removing And Installing Accelerator Pedal
          • Removing Accelerator Pedal
          • Installing Accelerator Pedal
    • 24 Fuel System - Electronic Injection 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 240919 - Removing And Installing High-Pressure Sensor
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing High-Pressure Sensor
        • Installing High-Pressure Sensor
        • Subsequent Work
      • WM, 242419 - Removing And Installing Air-Cleaner Element
        • Preliminary Work
        • Removing Air-Cleaner Element
        • Installing Air-Cleaner Element
        • Subsequent Work
      • WM, 242519 - Removing And Installing Air Cleaner Housing
        • Preliminary Work
        • Removing Air Cleaner Housing
        • Installing Air Cleaner Housing
        • Subsequent Work
      • WM, 243020 - Removing And Installing Fuel Collection Pipe
        • Tools
        • Technical Values
        • Information
          • Component Information
        • Preliminary Work
        • Removing Fuel Collection Pipe
        • Installing Fuel Collection Pipe
        • Subsequent Work
      • WM, 244019 - Removing And Installing Fuel Injector
        • Tools
        • Preliminary Work
        • Removing Fuel Injector
        • Installing Fuel Injector
        • Subsequent Work
      • WM, 244219 - Removing And Installing Throttle Housing
        • Technical Values
        • Preliminary Work
        • Removing Throttle Housing
        • Installing Throttle Housing
        • Subsequent Work
      • WM, 244229 - Cleaning Throttle Housing (China)
        • Preliminary Work
        • Cleaning Throttle Housing
        • Subsequent Work
      • WM, 244601 - Checking Intake-Air Distributor For Leaks
        • Tools
        • Preliminary Work
        • Checking Intake-Air Distributor For Leaks
        • Subsequent Work
      • WM, 244619 - Removing And Installing Centre Intake-Air Distributor
        • Preliminary Work
        • Removing Centre Intake-Air Distributor
        • Installing Centre Intake-Air Distributor
        • Subsequent Work
      • WM, 244619 - Removing And Installing Intake-Air Distributor
        • Technical Values
        • Preliminary Work
        • Removing Intake-Air Distributor
        • Installing Intake-Air Distributor
        • Subsequent Work
      • WM, 246319 - Removing And Installing High-Pressure Pump
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing High-Pressure Pump
        • Installing High-Pressure Pump
        • Subsequent Work
      • WM, 246919 - Removing And Installing Oxygen Sensor Upstream Of Catalytic Converter
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oxygen Sensor Upstream Of Catalytic Converter
          • Removing Oxygen Sensor Upstream Of Catalytic Converter For Cylinders 3-4 (Left)
          • Removing Oxygen Sensor Upstream Of Catalytic Converter For Cylinders 1-2 (Right)
        • Installing Oxygen Sensor Downstream Of Catalytic Converter
        • Subsequent Work
      • WM, 247019 - Removing And Installing Digital Engine Electronics (DME) Control Unit
        • Tools
        • Component Information
          • Installation Position Of DME Control Unit
        • Preliminary Work
        • Removing And Installing DME Control Unit
      • WM, 247055 - Replacing DME Control Unit
        • Tools
        • Replacing DME Control Unit
          • Replacing DME Control Unit (Not For GT4)
        • Subsequent Work
      • WM, 247319 - Removing And Installing Oxygen Sensor Downstream Of Catalytic Converter
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oxygen Sensor Downstream Of Catalytic Converter
        • Installing Oxygen Sensor Downstream Of Catalytic Converter
        • Subsequent Work
      • WM, 248019 - Removing And Installing Intake Pipe Pressure Sensor
        • Preliminary Work
        • Removing Intake Pipe Pressure Sensor
        • Installing Intake Pipe Pressure Sensor
        • Subsequent Work
      • WM, 249019 - Removing And Installing Fuel Line
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Fuel Line
        • Installing Fuel Line
        • Subsequent Work
  • 28 Ignition System, PREGLOW System 2.0L -- 982 - BOXSTER/CAYMAN
    • WM, 280419 - Removing And Installing Ignition Starter Switch
      • Tools
      • Technical Values
      • Component Information
        • Installation Position Of Ignition Starter Switch
      • Preliminary Work
      • Removing And Installing Ignition Starter Switch
      • Subsequent Work
    • WM, 282020 - Removing And Installing Ignition Coils
      • Technical Values
      • Preliminary Work
      • Removing Ignition Coils
      • Installing Ignition Coils
      • Subsequent Work
    • WM, 2820IN - Applying Lubricant On Ignition Coils
      • Information
    • WM, 283919 - Removing And Installing Camshaft Sensor
      • Technical Values
      • Preliminary Work
      • Removing Camshaft Sensor
      • Installing Camshaft Sensor
      • Concluding Work
    • WM, 287020 - Removing And Installing Spark Plugs
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Spark Plugs
      • Installing Spark Plugs
      • Subsequent Work
    • WM, 287219 - Removing And Installing Knock Sensor
      • Technical Values
      • Preliminary Work
      • Removing Knock Sensor
      • Installing Knock Sensor
      • Subsequent Work
    • WM, 287319 - Removing And Installing Pulse Sender
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Pulse Sender
      • Installing Pulse Sender
      • Subsequent Work
        • Notes
        • Subsequent Work For Diagnostic Scopes
    • WM, 287419 - Removing And Installing Engine Compartment Temperature Sensor
      • Preliminary Work
      • Removing Engine Compartment Temperature Sensor
      • Installing Engine Compartment Temperature Sensor
      • Subsequent Work
  • Specifications
    • Firing Order & Cylinder Identification
      • Firing Order & Cylinder Identification
        • Notes
        • H4 Engine
        • Inline 4-CYL Engine
        • H6 Engine
        • V6 Engine
        • Diesel (NAR) V6 Engine
        • 2015 SPYDER V8 Engine
        • V8 Engine
        • V10 Engine
  • Tune-Up
    • 28 Ignition System, PREGLOW System 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 280419 - Removing And Installing Ignition Starter Switch
        • Tools
        • Technical Values
        • Component Information
          • Installation Position Of Ignition Starter Switch
        • Preliminary Work
        • Removing And Installing Ignition Starter Switch
        • Subsequent Work
      • WM, 282020 - Removing And Installing Ignition Coils
        • Technical Values
        • Preliminary Work
        • Removing Ignition Coils
        • Installing Ignition Coils
        • Subsequent Work
      • WM, 2820IN - Applying Lubricant On Ignition Coils
        • Information
      • WM, 283919 - Removing And Installing Camshaft Sensor
        • Technical Values
        • Preliminary Work
        • Removing Camshaft Sensor
        • Installing Camshaft Sensor
        • Concluding Work
      • WM, 287020 - Removing And Installing Spark Plugs
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Spark Plugs
        • Installing Spark Plugs
        • Subsequent Work
      • WM, 287219 - Removing And Installing Knock Sensor
        • Technical Values
        • Preliminary Work
        • Removing Knock Sensor
        • Installing Knock Sensor
        • Subsequent Work
      • WM, 287319 - Removing And Installing Pulse Sender
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Pulse Sender
        • Installing Pulse Sender
        • Subsequent Work
          • Notes
          • Subsequent Work For Diagnostic Scopes
      • WM, 287419 - Removing And Installing Engine Compartment Temperature Sensor
        • Preliminary Work
        • Removing Engine Compartment Temperature Sensor
        • Installing Engine Compartment Temperature Sensor
        • Subsequent Work
• General Information
  • Abbreviations
    • Commonly Used Abbreviations - General Information
      • * Please Read This First *
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "J"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "Q"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
  • Basic Trouble Shooting
    • Basic Trouble Shooting - General Information
      • * Please Read This First *
      • Accessories & Electrical
        • Charging System Trouble Shooting
        • Ignition System Trouble Shooting
        • Starter Trouble Shooting
      • Air Conditioning & Heat
        • Air Conditioning Trouble Shooting
        • Heater System Trouble Shooting
      • Brakes
        • Brake System Trouble Shooting
      • Engine Mechanical
        • Cooling System Trouble Shooting
        • Gasoline Engine - Mechanical Trouble Shooting
      • Engine Performance
        • Carburetor Trouble Shooting:
        • Diesel Engine Trouble Shooting
        • Fuel Injection Trouble Shooting
        • Ignition System Trouble Shooting
        • Starter Trouble Shooting
        • Tune-Up Trouble Shooting - Gas Engine Vehicles
        • Vacuum Pump - Diesel Trouble Shooting
      • Manual Transmission
        • Manual Transmission Trouble Shooting
      • Powertrain
        • Clutch Trouble Shooting
        • Drive Axle - Noise Diagnosis
          • Unrelated Noises
          • Non-Drive Axle Noises
          • Gear Noise
          • Chuckle
          • Knock
          • Clunk
          • Bearing Whine
          • Bearing Rumble
          • Chatter On Turns
          • Axle Shaft Noise
          • Vibration
        • Drive Axle - RWD Trouble Shooting
        • Fwd Axle Shafts & CV Joints Trouble Shooting
      • Steering & Suspension
        • Manual Steering Gear Trouble Shooting
        • Power Steering Trouble Shooting
        • Steering Column Trouble Shooting
        • Suspension Trouble Shooting
        • Wheel Alignment Trouble Shooting
    • Commonly Used Abbreviations - General Information
      • * Please Read This First *
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "J"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "Q"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Engine Performance - Trouble Shooting - General Information
      • * Please Read This First *
      • Engine Performance
  • Brakes
    • 4X Chassis - General 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 4X001N Tightening Torques For Steering
        • Technical Values
        • Tightening Torques For Steering
          • Steering Gear, Tie Rod
          • Steering Column, Steering Wheel
      • WM, 4X001N Removing Transport Lock (Spring Strut Locking Devices]
        • Spring Strut Locking Device Information
        • Removing Spring Strut Locking Devices
      • WM, 4X00IN Lifting The Vehicle
        • Lifting The Vehicle
      • WM, 4X001N General Information On Tyre Pressure Monitoring (TPM)
        • Tools
        • General Information On Tyre Pressure Monitoring (TPM)
          • Design And Operating Principle
          • Transmission Modes
        • Teaching Tyre Pressure Monitoring (TPM)
          • General Information
          • Teaching While Driving
          • Teaching While Stationary
      • WM, 4X001N Tightening Torques For Brake Mechanism/Brake Hydraulic System
        • Technical Values
        • Tightening Torques For Brake Mechanism
          • Electric Parking Brake
          • Brake Disc, Brake Cover Plate
          • Pedals, Brake Pedal, Mounting Saddle
        • Tightening Torques For Brake Hydraulics
          • Brake Lines
          • Brake Calliper
          • Brake Master Cylinder, Brake Booster, Vacuum Pump
          • Hydraulic Unit
          • Rotation-Rate Sensor
      • WM, 4X001N Tightening Torques For Front Axle
        • Technical Values
        • Tightening Torques For Front Axle
          • Front-Axle Carrier
          • Front-Axle Support
          • Wheel Bearing Housing
          • Trailing Arm
          • Damper Strut
          • Sensor For Body (PASM)
          • Anti-Roll Bar, Connecting Link
          • Wheel Mounting
      • WM, 4X001N Tightening Torques For Rear Axle
        • Technical Values
        • Tightening Torques For Rear Axle
          • Rear Axle Cross Member, Rear Axle Carrier Side Part, Support Plate, V-Strut
          • Trailing Arm
          • Wheel Bearing Housing
          • Spring Strut
          • Sensor For Body (PASM)
          • Anti-Roll Bar, Connecting Links
          • Drive Shaft
          • Wheel Mounting
      • WM, 4X001N Safety Instructions And Information For Carrying Out Repairs On The Chassis
        • General Warning Notes
          • Fitting Chassis Components
          • Spring Struts/Coil Springs
          • Wheels And Tyres
          • Working On Vehicles With PSM
          • Brake System
          • Handling Airbag Systems
      • WM, 4X001N Brake Disc Measurement Sheet
        • Information
          • Brake Disc Measurement Sheet
      • WM, 4X001N Braking Performance Test - Data For Compulsory Vehicle Testing As Per 29 STVZO (German Road Traffic Regulations) As Of Model Year C (2012)
        • Braking Performance Test - Data For Compulsory Vehicle Testing As Per 29 STVZO (German Road Traffic Regulations]
    • Anti-Lock Brake Safety Precautions - General Information
      • * Please Read This First *
      • Anti-Lock Brake Safety Precautions
    • Map - Brake Systems
      • Brake Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Accelerometers
        • Accumulators
        • Anchor Pins
        • Anti-Lock Brake Control Assembly(Module)
        • Anti-Lock Brake Controller
        • Anti-Lock Brake Systems
        • Axle Seal
        • Backing Plates
        • Bleeder Screw
        • Brake Abs Active Light (Blue)
        • Brake Fluid
        • Brake Friction Material
        • Brake On - Off Switch
        • Brake Pads
        • Brake Pedals
        • Brake Shoe Hardware
        • Brake Shoes
        • Brake Stoplight Switches
        • Brake Warning Light (Amber)
        • Brake Warning Light (Red)
        • Bulb Sockets
        • Bulbs And LEDS
        • Caliper Hardware
        • Caliper Mounting Pin
        • Caliper Piston
        • Caliper Shim
        • Caliper Slider Pin (Bolt) Dust Boot
        • Caliper Slider Pin (Bolt)
        • Calipers
        • Combination Valve
        • Controllers
        • Digital Ratio Axle Controllers And Buffers (Drab And Dram)
        • Disable Switches
        • Drums
        • Electrical Brake Pumps
        • Electrical Park Motor
        • Electrical Pumps And Motors
        • Electro-Magnetic Interference
        • Electronic Brake Control Modulator
        • Electronic Brake Distribution
        • Electronic Brake Traction Control Module
        • Electronic Controllers
        • Electronic Traction Control
        • External Brake Cable
        • Flow Control Valve
        • Fluid Level Sensor Switches
        • Fluid
        • Four Wheel Drive Switches
        • Friction Material
        • G Sensors
        • Gaskets
        • Gravitational Switches
        • Grease Seal
        • Height Sensing Proportioning Valve
        • High Pressure Accumulator
        • Hoses
        • Hub
        • Hydraulic Control Unit
        • Hydraulic Modulators
        • Hydro-Boosters
        • Hydro-Electric Boosters (POWERMASTER)
        • Ignition Disable Switches
        • Lamp Driver Relay
        • Lateral Acceleration Switches
        • LEDS
        • Lenses
        • Low Pressure Accumulator
        • Lug Nut
        • Master Cylinder Cover Gasket
        • Master Cylinders
        • Modulators
        • Motor Pack
        • Motors
        • Pads
        • Parking Brake Cable
        • Parking Brake Mechanism
        • Parking Brake Shoes
        • Parking Brake Switches
        • Parking Brake Systems
        • Pedal Travel Switches
        • Pedals
        • Power Distribution Center
        • POWERMASTER
        • Pressure Differential Switches
        • Pressure Switches
        • Pressure Transducers
        • Proportioning Valve
        • Pumps
        • Relays
        • RELUCTOR (Speed) Ring
        • Rotors
        • Self-Adjusting Systems
        • Shoe Hardware
        • Shoes
        • Sockets
        • Speed Sensor (RELUCTOR) Ring
        • Speed Sensors (Electronic Wheel And Vehicle)
        • Star Wheel
        • Steel Brake Lines
        • Stoplight Switches
        • Stroke Sensor
        • Switches
        • Tires
        • Tone Ring
        • Toothed Rings (Tone Wheel)
        • Traction Control System (TCS)
        • Transfer Tubes
        • Vacuum Boosters
        • Vacuum Hoses
        • Valves
        • Wear Indicator
        • Wheel Attachment Hardware
        • Wheel Bearings, Races And Seals
        • Wheel Cylinders
        • Wiring Harnesses
        • Yaw Rate Sensor
      • Brake System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Map - Routine Inspection Reference Guide
      • Routine Inspection Reference Guide
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Maintenance Overview
          • Antifreeze/Coolant
          • Visual Inspection
          • Radiator Cap Test
          • Engine Fan
          • Cooling System Power Flush And Refill
          • Belts (Except Timing Belts)
          • Belt TENSIONER
          • Automatic Transmission Fluid
          • Automatic Transmission Fluid Exchange & Filter Replacement
          • Engine Oil
          • Air Filters
          • Cabin Air Filter
          • Brake Fluid
          • Battery
          • Battery Cables
          • Power Steering
          • Power Steering Fluid
          • Wiper Blades
        • Routine Inspection CHECKSHEET
        • Routine Inspection - UICS
          • Brake Systems
            • Notes
            • Brake Fluid
            • Bulbs And LEDS
            • Hoses
            • Lenses
            • Lug Nut
            • Master Cylinder Cover Gasket
            • Parking Brake Cable
            • Vacuum Hoses
            • Wheel Attachment Hardware
            • Wheel Bearings, Races And Seals
          • Drivetrain And Transmission
            • Notes
            • Automatic Transmission Fluid
            • Clutch Master Cylinders
            • Cooler Lines
            • Coolers
            • Differential Fluid
            • Drain Plugs And Gaskets
            • Filters And Screens
            • Fluids And Lubricants
            • Hoses, Lines, And Tubes
            • Hydraulic Fluid
            • Lubricants
            • Manual Transmission Fluid
            • Mounts (Engine, Transaxle And Transmission)
            • Transfer Case Fluid
            • Vacuum Hoses
          • Electrical Systems
            • Batteries
            • Battery Cables
            • Battery Trays And Hold Down Hardware
            • Bulbs, Sealed Beams And LEDS
            • Fuses, Fusible Links And Circuit Breakers
            • Ground Cables And Straps
            • Ground Straps
            • Lenses
            • Sealed Beams
            • Washer Pumps
            • Wiper Arms And Blades
            • Wiper Hoses And Nozzles
            • Wiper Pump Reservoirs
          • Engine Performance And Maintenance
            • Notes
            • Accessory Belts
            • Air Filter Elements
            • Air Filter Gaskets
            • Air Filter Housings And Gaskets
            • Air Pump Belts
            • Batteries
            • Battery Connectors
            • Belt Idler Assemblies (Accessory And Cam Belts)
            • Belt TENSIONERS (Accessory And Cam Belt)
            • Chemical Engine DECARBONIZATION
            • Combustion Chamber Cleaning
            • Coolant Recovery Tanks
            • Coolant
            • Distributor Caps
            • Distributor Rotors
            • Engine Cooling Systems
            • Engine DECARBONIZATION
            • Engine Oil Drain Plugs And Gaskets
            • Engine Oil Filters And Canisters
            • Engine Oil
            • Fuel Filters
            • Fuel Injector Cleaning
            • Fuel Injectors
            • Fuel System Cleaning Service
            • Hose Clamps
            • Hose Connectors
            • Hose Couplers
            • Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
            • Ignition Wires (Secondary)
            • Intake Cleaning
            • O2 Sensors
            • PCV Breather Elements
            • PCV Valves
            • Radiator Caps And Pressurized Expansion Tank Caps
            • Spark Plugs
            • Thermostats And Housings
            • Throttle Body Cleaning
            • Timing Belts
            • Vacuum Hoses, Tubes And Connections (Non-Metallic)
          • Exhaust Systems
            • Notes
            • Exhaust And Tail Pipes
          • Heating, Ventilation And Air Conditioning Systems
            • Notes
            • Belts
            • Cabin Air Filters
            • Coolant
            • Evaporator Drain Tubes
            • Evaporator Filters
            • In-Line Filters
            • Vacuum Hoses And Tubes
          • Steering And Suspension, Wheel Alignment, Wheels And Tires
            • Notes
            • Hydraulic Hoses
            • Power Steering Belts
            • Power Steering Fluid
            • Power Steering Hoses
            • Shock Absorbers, Strut Cartridges And Strut Assemblies
            • Strut Rods
            • Tire Pressure Monitoring System
            • Tire Pressure Sensors
            • Tires
            • Valve Stems
            • Wheel Attachment Hardware
            • Wheel Bearings, Races And Seals
      • Wheel & Tire Supplement
        • Notes
        • Tires
        • Mounting Tires
        • Vehicle Tire Placard
        • Tire Rotation
        • Wheel Lug Nut Torque & Clamping Force
        • Popular Tire Rotation Patterns
        • Wheels And Rims
        • Tire Pressure Monitoring Systems
        • Wheels & Tires CHECKSHEET
        • Wheel & Tire - UICS
          • Tire Pressure Monitoring System
          • Tire Pressure Sensors
          • Tires
          • Wheel Alignment
          • Wheel Attachment Hardware
          • Wheels (Rims)
      • Reason Code Explanation
      • Automotive Terminology & Definitions
  • Check Lists
    • Symptom Check List Worksheet - General Information
      • * Please Read This First *
      • Purpose
        • Notes
        • Why Use the Symptom Check List Worksheets?
        • Making the Worksheets a Part of Your Normal Routine
      • Symptom Check List Worksheets
        • Condensed Version - All On One Page
        • Full Version - All On Four Pages
        • Individual System-Based Check Lists
  • Driveline/Axles
    • Drive Axle Noise Diagnosis - General Information
      • * Please Read This First *
      • Unrelated Noises
      • Non-Drive Axle Noises
      • Gear Noise
      • Chuckle
      • Knock
      • Clunk
      • Bearing Whine
      • Bearing Rumble
      • Chatter On Turns
      • Axle Shaft Noise
      • Vibration
    • Gear Tooth Contact Patterns - General Information
      • * Please Read This First *
      • Inspection
        • Notes
        • Gear Tooth Contact Pattern
      • Adjustments
        • Notes
        • Gear Backlash & Pinion Shim Changes
    • Map - Drive Train & Transmission
      • Drive Train & Transmission Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Drivetrain And Transmission
        • Notes
        • Actuators (Electrical)
        • Actuators (Vacuum)
        • Automatic Transmission / Transaxle Assemblies/CVTS
        • Automatic Transmission Fluid
        • Axles
        • Bearings And Races
        • Bell Cranks
        • Bell Housings
        • Bushings (External)
        • Cables (Speedometer)
        • Cables (TV, Detent And Shift)
        • Carrier Bearings
        • Clutch Cables And Cable Housings
        • Clutch Discs (Manual Transmissions)
        • Clutch Forks
        • Clutch Linkages (Mechanical)
        • Clutch Master Cylinders
        • Clutch Pedals
        • Clutch Pivots
        • Clutch Pressure Plates
        • Clutch Release Bearings
        • Clutch Slave Cylinders (Concentric)
        • Clutch Slave Cylinders (Conventional Or External)
        • Companion Flanges
        • Connectors
        • Cooler Bypass Valves
        • Cooler Lines
        • Coolers
        • CV Joints
        • Differential And Final Drive Assemblies
        • Differential Fluid
        • Dip Stick Tubes
        • Dip Sticks (Fluid Level Indicators)
        • Dowel Pins, Guides And Pilot Holes
        • Drain Plugs And Gaskets
        • Drive Shaft Flanges
        • Drive Shafts And Half Shafts
        • Dust Boots
        • Engine Mounts
        • Exciter Rings
        • Filler Tubes
        • Filters And Screens
        • Flanges
        • Flex Plates
        • Fluid Level Indicators
        • Fluids And Lubricants
        • Flywheels
        • Force Motors
        • Gaskets
        • Guides
        • Half Shafts
        • Hoses, Lines, And Tubes
        • Housings (Bell, Case, Tail(Extension) And Auxiliary)
        • Hydraulic Fluid
        • Intermediate Shaft Support Bearings
        • Key Interlock Systems
        • Limited Slips
        • Lines
        • Linkages (External)
        • Locking Hub Assemblies
        • Locking Hub Control Knobs
        • Lubricants
        • Manual Transmission Fluid
        • Manual Transmission/Transaxle Assemblies
        • Metal Clad Seals
        • METALASTIC Joints
        • Modulator Pins
        • Modulators
        • Mounts (Engine, Transaxle And Transmission)
        • Odometer Drives (Mechanical)
        • Odometer Heads (Mechanical)
        • Oil Pans
        • Pans
        • Pilot Holes
        • Pressure Plates
        • Pressure Switches
        • Races
        • Rubber Joints (METALASTIC)
        • Screens
        • Seals (Metal Clad)
        • Seals
        • Selector Interlock Systems
        • Sensors
        • Servos
        • Shift Interlock Systems (Selector And Key Interlock Systems)
        • Side Covers
        • Slip Yokes
        • Solenoids
        • Speed Sensors (Electronic Wheel And Vehicle)
        • Speedometer- Driven Gear Housing
        • Speedometer/Odometer Drives (Mechanical)
        • Speedometer/Odometer Heads (Mechanical)
        • Speedometers/Odometers (Electronic)
        • Switches
        • Tone Wheels
        • Toothed Rings (Tone Wheel)
        • Torque Converters
        • Transaxle Mounts
        • Transducers (Transmission)
        • Transfer Case Assemblies
        • Transfer Case Fluid
        • Transmission Coolers
        • Transmission Mounts
        • Transmission Pans
        • Transmission Range Indicators (PRNDL)
        • Tubes
        • Universal Joints (CARDAN Or Cross Type)
        • Vacuum Controls
        • Vacuum Hoses
        • Vacuum Motors
        • Vacuum-Operated Switches
        • Vehicle Speed Sensors
        • Vents
        • Vibration Dampers
        • Wheel Attachment Hardware
        • Wheel Speed Sensors
        • Wiring Harnesses And Connectors
        • Yokes And Slip Yokes
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Trouble Shooting - Clutches - General Information
      • * Please Read This First *
      • All Models
  • Electrical
    • 2X Petrol, Exhaust, Engine-Electric - General 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 2X00 - 3D PDF Engine Transmission
      • WM, 2X00IN - Electrical Emergency Release, Front Lid
        • Electrical Emergency Release, Front Lid
      • WM, 2X00IN - Precautionary Measures When Handling Oxygen Sensors
        • Information
          • Specifications When Handling Oxygen Sensors
      • WM, 2X00IN - Battery Trickle Charge
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Checking Charge State With Battery Tester
        • Battery Trickle Charging
        • Subsequent Work
      • WM, 2X00IN - Work Instructions After Disconnecting The Battery
        • Technical Values
        • Disconnecting And Connecting Battery
        • Effect Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And The Precautions To Be Taken
        • Test Drive After Disconnecting Battery
        • Effects Of OVERVOLTAGE On Electrical And Electronic Systems During Welding Work And The Precautions To Be Taken
      • WM, 2X00IN - Rules Relating To Cleanliness And Instructions For Working On The Fuel System
        • Information
          • Rules Relating To Cleanliness And Instructions For Working On The Fuel System
      • WM, 2X00IN - Basic Safety Instructions For Working With The Fuel System
        • Safety Instructions
          • Safety Instructions When Working On The Fuel System
      • WM, 2X00IN - Technical Values - Group 2
        • Tools
        • Technical Values
        • Technical Values - Group 20 - Fuel Supply, Actuator
          • Fuel Supply
        • Technical Values - Group 21 - Exhaust Gas - Turbocharging
          • Turbocharger, Charge Air Guide
          • Assembly Overview - Turbocharger
          • Assembly Overview - Turbocharger Coolant Lines
          • Assembly Overview - Oil Lines For Turbocharger
          • Assembly Overview - Charge Air Cooling System
        • Technical Values - Group 24 - Fuel System, Electronic Injection
          • Assembly Overview - Intake-Air Distributor
          • High-Pressure Pump
          • Oxygen Sensors
        • Technical Values - Group 26 - Exhaust System
          • Assembly Overview - Exhaust Manifold
          • Assembly Overview - Catalytic Converter/Exhaust Manifold Holder
          • Exhaust System
          • Heat Shields On Exhaust System, Heat Protection
          • Heat Shield On Catalytic Converter With Particle Filter
          • Catalytic Converter With Particle Filter
        • Technical Values - Group 27 - Starter, Power Supply, Cruise Control
          • Starter, Generator
          • Adaptive Cruise Control
          • Battery
        • Technical Values - Group 28 - Overview Of Ignition System, Engine Sensors
          • Ignition, Engine Sensors
    • Map - Electrical Systems
      • Electrical Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Actuator Motors (Electric)
        • Actuator Motors (Vacuum)
        • Air Bags
        • Alternators And Generators
        • Amplifiers
        • Antennas
        • Batteries
        • Battery Cables, Wires And Connectors
        • Battery Cables
        • Battery Trays And Hold Down Hardware
        • Battery Wires
        • Belts
        • Bulb Sockets
        • Bulbs, Sealed Beams And LEDS
        • Cd Players
        • Cigarette Lighter Assemblies
        • Circuit Breakers
        • Clutch Switches
        • Connectors
        • Control Modules
        • Cruise Control Brake Switches
        • Cruise Control Cables
        • Cruise Control Clutch Switches
        • Cruise Control Linkages And Cables
        • Cruise Control Reservoirs
        • Cruise Control Tubes
        • Cruise Control Vacuum Dump Release Valves
        • Cruise Control Vacuum Hoses, Tubes And
        • Cruise Control Vehicle Speed Sensors
        • Defoggers
        • Defrosters
        • Delays
        • Dimmers
        • Electric Heaters
        • Equalizers
        • Fuse Blocks
        • Fuse Boxes And Blocks
        • Fuses, Fusible Links And Circuit Breakers
        • Fusible Links
        • Gauges
        • Generators
        • Ground Cables And Straps
        • Ground Straps
        • Headlight Adjusters
        • Heating Elements (Defrosters, Defoggers, Electric Heaters And Seats)
        • Horns And Sirens
        • Ignition Switches
        • Indicator Lights
        • Keyless Entry Keypads And Transmitters
        • Keyless Entry Transmitters
        • LEDS
        • Lenses
        • Microphones
        • Mirrors (ELECTROCHROMATIC And Heated)
        • Motors
        • Neutral Safety Switches
        • Odometers, Speedometers And Tachometers (Cable Driven)
        • Odometers
        • Power Distribution Center
        • Pulleys
        • Receivers, Amplifiers, Equalizers And Sub-Woofer Volume Controls
        • Relay Boxes
        • Relays
        • Sealed Beams
        • Seat Heaters
        • Security Alarm Sensors
        • Sirens
        • Solenoids
        • Speakers And Microphones
        • Speedometer And Tachometer Linkages And Cables
        • Speedometer Cables
        • Speedometers
        • Starters
        • Sub-Woofer Volume Control
        • Switches
        • Tachometer Cables
        • Tachometers
        • Tape Players And Cd Players
        • TENSIONERS
        • Timers
        • Transceivers
        • Transducers
        • Vacuum Accumulators (Reservoirs)
        • Voltage Regulators
        • Washer Fluid Level Senders
        • Washer Pumps
        • Wiper Arms And Blades
        • Wiper Blades
        • Wiper Hoses And Nozzles
        • Wiper Linkages
        • Wiper Nozzles
        • Wiper Pump Reservoirs
        • Wiring Harnesses And Connectors
      • Battery, Starting & Charging System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
  • Engine
    • Engine Overhaul Procedures - General Information
      • * Please Read This First *
      • Description
      • Engine Identification
      • Inspection Procedures
        • * Please Read This First *
        • General
        • Magnetic Particle Inspection
          • Notes
          • Magnaflux & Magnaglo
        • Penetrant Inspection
          • Notes
          • Zyglo
          • Dye Check
        • Ultrasonic Inspection
        • X-Ray Inspection
        • Pressure Testing
      • Cleaning Procedures
        • * Please Read This First *
        • General
        • Bead Blasting
        • Chemical Cleaning
      • Component Cleaning
        • * Please Read This First *
        • Sheet Metal Parts
        • Intake & Exhaust Manifolds
      • Cylinder Head Replacement
        • * Please Read This First *
        • Removal
        • Installation
        • Valve Adjustment
      • Cylinder Head Overhaul
        • * Please Read This First *
        • Cylinder Head Disassembly
        • Cylinder Head Cleaning & Inspection
        • Valve Springs
        • Valve Guide
          • Notes
          • Measuring Valve Guide Clearance
          • Reaming Valve Guide
          • Replacing Valve Guide
        • Valves & Valve Seats
          • Notes
          • Valve Grinding
          • Valve Lapping
          • Valve Seat Grinding
          • Valve Seat Replacement
          • Valve Seat Concentricity
        • Cylinder Head Reassembly
          • Notes
          • Valve Stem Installed Height
        • Valve Stem Oil Seals
          • Notes
          • Replacement (On-Vehicle)
        • Valve Spring Installed Height
        • Rocker Arms & Assemblies
          • Notes
          • Rocker Studs
          • Rocker Arms & Shafts
        • Push Rods
        • Lifters
          • Notes
          • Hydraulic Lifters
          • Mechanical Lifters
      • Pistons, Connecting Rods & Bearings
        • * Please Read This First *
        • Ridge Removal
        • Piston & Connecting Rod Removal
        • Piston & Connecting Rod
          • Notes
          • Disassembly
          • Cleaning
          • Inspection
        • Piston & Cylinder Bore Fit
        • Assembling Piston & Connecting Rod
        • Checking Piston Ring Clearances
        • Piston & Connecting Rod Installation
        • Connecting Rod Side Clearance
        • Main & Connecting Rod Bearing Clearance
          • Notes
          • Plastigage Method
          • Micrometer & Telescopic Gauge Method
      • Crankshaft & Main Bearings
        • * Please Read This First *
        • Removal
        • Cleaning & Inspection
        • Installation
        • Crankshaft End Play
          • Notes
          • Dial Indicator Method
          • Feeler Gauge Method
        • Cylinder Block
          • Notes
          • Block Cleaning
          • Block Inspection
          • Cylinder Bore Inspection
          • Cylinder Honing
          • Deck Warpage
          • Deck Height
          • Main Bearing Bore & Alignment
          • Expansion Plug Removal
          • Expansion Plug Installation
          • Oil Gallery Plug Removal
          • Oil Gallery Plug Installation
      • Camshaft
        • * Please Read This First *
        • Cleaning & Inspection
        • Camshaft Bearings
          • Notes
          • Removal & Installation
        • Camshaft Installation
        • Camshaft End Play
      • Timing Chains & Belts
        • * Please Read This First *
        • Timing Chains
        • Timing Belts
        • Tension Adjustment
      • Timing Gears
        • * Please Read This First *
        • Timing Gear Backlash & RUNOUT
        • Rear Main Oil Seal Installation
          • Notes
          • One-Piece Type Seal
          • Rope Type Seal
          • Split-Rubber Type Seal
      • Oil Pump
        • * Please Read This First *
        • Rotor Type
        • Gear Type
      • Break-In Procedure
        • * Please Read This First *
        • Engine Pre-Oiling
        • Initial Start-Up
        • Camshaft
        • Piston Rings
        • Final Adjustments
    • General Cooling System Service - General Information
      • * Please Read This First *
      • Description
      • Maintenance
        • Draining
        • Flushing
          • Notes
          • Radiator
          • Engine Block
        • Refilling
      • Testing
        • Thermostat
        • Pressure Testing
          • Notes
          • Radiator Cap
          • Cooling System
  • Engine Performance
    • Electrostatic Discharge Warning - General Information
      • * Please Read This First *
      • Introduction
      • Handling Static-Sensitive Circuits/Devices
      • Checking Static-Sensitive Circuits/Devices
    • Engine Performance Diagnostic Routine Outline - General Information
      • * Please Read This First *
      • Where Does DRIVEABILITY Diagnosis Start?
        • Perform Basic Inspection
        • Check For Trouble Codes
        • Diagnose Symptom
        • Test System
    • Engine Performance Safety Precautions
      • Engine Performance Safety Precautions
    • Map - Engine Performance & Maintenance
      • Engine Performance And Maintenance (Including Exhaust Systems)
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Engine Performance & Maintenance CHECKSHEET
      • Engine Performance And Maintenance
        • Notes
        • Accelerator Pedal Position Sensor
        • Accessory Belts
        • Accessory Pulleys
        • Air Conditioning Cycling Switches
        • Air Conditioning Pressure Sensors
        • Air Ducts And Tubes
        • Air Filter Elements
        • Air Filter Gaskets
        • Air Filter Housings And Gaskets
        • Air Fuel Ratio Sensors
        • Air Injection Control Solenoids
        • Air Plenums
        • Air Pump Belts
        • Air Pumps (Electric Driven)
        • Air Tubes
        • Aspirator, Check And DECEL Valves
        • Baffles
        • Ballast Primary Supply Resistor Wires
        • Ballast Resistors And Primary Supply Resistors
        • Barometric Pressure Sensors
        • Batteries
        • Battery Cables, Wires And Connectors
        • Battery Connectors
        • Battery Trays And Hold Down Hardware
        • Battery Wires
        • Belt Idler Assemblies (Accessory And Cam Belts)
        • Belt TENSIONERS (Accessory And Cam Belt)
        • Belt-Driven Air Pumps
        • Boost Control Mechanism
        • Camshaft Position Sensors
        • Carburetors And Chokes
        • Casting Core Plugs And Expansion Plugs
        • Charge Air Coolers ""INTERCOOLERS"" (CAC)
        • Check Valves
        • Chemical Engine DECARBONIZATION
        • Chokes
        • Clutch Pedal Position Switches
        • Cold Start Injectors
        • Combustion Chamber Cleaning
        • Connectors
        • Coolant Recovery Tanks
        • Coolant
        • Cooling Fan Motor Modules
        • Cooling Fan Motor Relays And Modules
        • Cooling Fan Motor Resistors
        • Cooling Fan Motor Sensors And Switches
        • Cooling Fan Motor Switches
        • Cooling Fan Motors
        • Crankshaft Position Sensors
        • Cylinder Deactivation Solenoid
        • Cylinder Head Assemblies
        • DECEL Valves
        • Deflectors
        • Dip Stick Tubes
        • Dip Sticks And Tubes
        • Distributor Advances And Retarders (Mechanical And Vacuum)
        • Distributor Boots And Shields
        • Distributor Caps
        • Distributor Retarders (Mechanical And Vacuum)
        • Distributor Rotors
        • Distributor Shields
        • Distributors
        • Early Fuel Evaporation Valves (Heat Riser Assemblies)
        • EGR Coolers
        • EGR Exhaust Manifold Passages
        • EGR Intake And Exhaust Manifold Passages
        • EGR Plates And Coolers
        • Electronic Spark Control Modules
        • Electronic Transmission Control Devices
        • Electronic Transmission Feedback Devices
        • Engine Coolant Temperature Sensors
        • Engine Cooling Systems
        • Engine Covers (Oil Pan, Valve Cover, Timing Cover)
        • Engine DECARBONIZATION
        • Engine Oil Canisters
        • Engine Oil Coolers (External)
        • Engine Oil Drain Plugs And Gaskets
        • Engine Oil Filters And Canisters
        • Engine Oil Gaskets
        • Engine Oil Pressure Gauges (Mechanical)
        • Engine Oil
        • Evaporative Emissions (EVAP) Canister Filters
        • Evaporative Emissions (EVAP) Canister Purge Devices
        • Evaporative Emissions (EVAP) Canisters
        • Evaporative Emissions (EVAP) Feedback Devices
        • Exhaust Gas RECIRCULATION Devices
        • Exhaust Gas RECIRCULATION Feedback Devices
        • Expansion Plugs
        • Fan Control Sensor
        • Fuel Accumulators And Dampers
        • Fuel And Cold Start Injectors
        • Fuel Caps
        • Fuel Dampers
        • Fuel Delivery Check Valves
        • Fuel Distributors (BOSCH Cis)
        • Fuel Filler Necks And RESTRICTORS
        • Fuel Filters
        • Fuel Injector Cleaning
        • Fuel Injectors
        • Fuel Level Senders
        • Fuel Pressure Regulators
        • Fuel Pumps (In-Tank, External, Electrical Or Mechanical)
        • Fuel Rails
        • Fuel RESTRICTORS
        • Fuel System Cleaning Service
        • Fuel Tanks
        • Fuel
        • Gaskets
        • Grommets (Valve Cover)
        • Harmonic Dampers
        • Heater Control Valves
        • Heater Cores
        • Hose Clamps
        • Hose Connectors
        • Hose Couplers
        • Hoses And Tube Couplers, Connectors And Clamps
        • Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
        • Housings
        • Idle Air Controls
        • Idle Speed Control Actuators
        • Ignition Boots
        • Ignition Coil Towers
        • Ignition Coils
        • Ignition Control Modules (ICM)
        • Ignition Switches
        • Ignition Terminals
        • Ignition Wires (Secondary)
        • Inertia Fuel Shut-Off Switches
        • Intake Air Temperature Sensors
        • Intake Cleaning
        • Intake Manifolds
        • In-Tank Fuel Strainers
        • INTERCOOLERS
        • Knock Sensors
        • Liquid Vapor Separators
        • Long Block Assemblies
        • Manifold Absolute Pressure (Map) Sensors
        • Mass Air Flow (MAF) Sensors
        • Metal Air Manifolds And Pipes
        • Metal Air Pipes
        • Mix Control Solenoids
        • Motor Mounts
        • O2 Sensors
        • Oil Pans
        • Oil Pressure Sending Units
        • Oil Pump Pick-Up Screens
        • Oil Pumps
        • O-Rings, Gaskets, Seals And Spring Locks
        • Park Neutral Position Switches
        • PCV Breather Elements
        • PCV Orifices
        • PCV Valves
        • Pick-Up Assemblies (Includes Magnetic, Hall Effect And Optical)
        • Power Steering Pressure Sensors
        • Powertrain Control Modules (Pcm) And Prom
        • Powertrain Control Prom
        • Pressurized Expansion Tank Caps
        • Radiator / Cooling Fan Blades
        • Radiator / Cooling Fan Clutches
        • Radiator Caps And Pressurized Expansion Tank Caps
        • Radiators
        • Roll Over Valves
        • Sealing Compounds
        • Seals
        • Secondary Air Injection System Management Devices
        • Sensors
        • Short Block Assemblies
        • Shrouds, Baffles And Deflectors
        • Spark Plugs
        • Spring Locks
        • Super Chargers
        • Switches
        • Thermal Vacuum Valves
        • Thermostatic Air Door Assemblies
        • Thermostats And Housings
        • Throttle Bodies
        • Throttle Body Cleaning
        • Throttle Cables
        • Throttle Linkages And Cables
        • Throttle Position Sensors
        • Throttle Position Switches
        • Timing Belt Sprockets
        • Timing Belts
        • Timing Covers
        • Torque Struts
        • Transmission Range Switches
        • Tube Clamps
        • Tube Connectors
        • Tube Couplers
        • Tubes
        • Turbo Chargers
        • Vacuum Connections
        • Vacuum Hoses, Tubes And Connections (Non-Metallic)
        • Vacuum Regulator Solenoids
        • Vacuum Tubes
        • Valve Covers
        • Vehicle Speed Senors
        • Volume Air Flow Sensors
        • Waste Gate And Boost Control Mechanisms
        • Waste Gate Control Solenoids
        • Water Pumps (Electric)
        • Water Pumps (Non-Electric)
        • Wiring Harnesses And Connectors
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Parasitic Load Explanation & Test Procedures - General Information
      • * Please Read This First *
      • General Information
      • Testing For Parasitic Load
        • Notes
        • CHRYSLER Ignition Off Draw (IOD) Test
        • Test Procedure Using Test Switch
        • Intermittent Parasitic Load Problems
        • Diode Check & Solenoid Test
        • Quad Driver Test
    • State Emission Standards - Diesel
      • ARIZONA
      • Colorado
      • CONNECTICUT
      • IDAHO
      • KENTUCKY
      • MASSACHUSETTS
      • New YORK
      • OHIO
      • RHODE Island
      • UTAH
      • WASHINGTON
    • State Emission Standards - Gas
      • ALASKA
      • ARIZONA
      • CALIFORNIA
        • California Emission Standards ASM Tests
        • Legend
        • Pass/Fail Emission Standards = A+B / VTW
      • Colorado
      • CONNECTICUT
      • DELAWARE
      • District Of COLUMBIA
      • GEORGIA
      • IDAHO
      • ILLINOIS
      • INDIANA
      • KENTUCKY
      • MARYLAND
      • MASSACHUSETTS
      • MISSOURI
      • NEVADA
      • New Jersey
      • New MEXICO
      • New YORK
      • North CAROLINA
      • OHIO
      • OREGON
      • PENNSYLVANIA
      • RHODE Island
      • TENNESSEE
      • TEXAS
      • UTAH
      • VIRGINIA
      • WASHINGTON
      • WISCONSIN
      • U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
      • U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
      • U.S. EPA Im240 Emission Standards
        • Start-Up Standards
        • Final Standards
    • Waveforms - Injector Pattern Tutorial - General Information
      • * Please Read This First *
      • Purpose Of This Article
        • Notes
        • Scope Of This Article
      • Is A Lab Scope Necessary?
        • Introduction
        • Overview Of NOID Light
          • Notes
          • Use the Right Noid Light
        • Overview Of DVOM
          • Notes
          • Checking Injector Resistance
          • Checking Available Voltage At the Injector
          • Checking Injector On-Time With Built-In Function
          • Checking Injector On-Time With Dwell Or Duty
          • How A Duty Cycle Meter and Dwell Meter Work
          • Strengths of Dwell/Duty Meter
          • Weaknesses of Dwell/Duty Meter
      • The Two Types Of Injector Drivers
        • Notes
        • Overview
        • Voltage Controlled Circuit ("Saturated Switch")
        • Current Controlled Circuit ("Peak & Hold")
      • The Two Ways Injector Circuits Are Wired
      • Interpreting Injector Waveforms
        • Notes
        • Interpreting A Voltage Controlled Pattern
        • Interpreting A Current Controlled Pattern
      • Current Waveform Samples
        • Notes
        • Example #1 - Voltage Controlled Driver
        • Example #2 - Voltage Controlled Driver
        • Example #3 - Voltage Controlled Driver
        • Example #4 - Current Controlled Driver
        • Example #5 - Current Controlled Driver
        • Example #6 - Current Controlled Driver
        • Example #7 - Current Controlled Driver
        • Example #8 - Current Controlled Driver
      • Voltage Waveform Samples
        • Notes
        • Example #1 - Voltage Controlled Driver
        • Example #2 - Voltage Controlled Driver
        • Example #3 - Voltage Controlled Driver
        • Example #4 - Current Controlled Driver
        • Example #5 - Current Controlled Driver
        • Example #6 - Current Controlled Driver
        • Example #7 - Current Controlled Driver
        • Example #8 - Current Controlled Driver
  • Exhaust
    • 2X Petrol, Exhaust, Engine-Electric - General 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 2X00 - 3D PDF Engine Transmission
      • WM, 2X00IN - Electrical Emergency Release, Front Lid
        • Electrical Emergency Release, Front Lid
      • WM, 2X00IN - Precautionary Measures When Handling Oxygen Sensors
        • Information
          • Specifications When Handling Oxygen Sensors
      • WM, 2X00IN - Battery Trickle Charge
        • Preliminary Work
        • General Warning Notes
        • Tools And Materials
        • Checking Charge State With Battery Tester
        • Battery Trickle Charging
        • Subsequent Work
      • WM, 2X00IN - Work Instructions After Disconnecting The Battery
        • Technical Values
        • Disconnecting And Connecting Battery
        • Effect Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And The Precautions To Be Taken
        • Test Drive After Disconnecting Battery
        • Effects Of OVERVOLTAGE On Electrical And Electronic Systems During Welding Work And The Precautions To Be Taken
      • WM, 2X00IN - Rules Relating To Cleanliness And Instructions For Working On The Fuel System
        • Information
          • Rules Relating To Cleanliness And Instructions For Working On The Fuel System
      • WM, 2X00IN - Basic Safety Instructions For Working With The Fuel System
        • Safety Instructions
          • Safety Instructions When Working On The Fuel System
      • WM, 2X00IN - Technical Values - Group 2
        • Tools
        • Technical Values
        • Technical Values - Group 20 - Fuel Supply, Actuator
          • Fuel Supply
        • Technical Values - Group 21 - Exhaust Gas - Turbocharging
          • Turbocharger, Charge Air Guide
          • Assembly Overview - Turbocharger
          • Assembly Overview - Turbocharger Coolant Lines
          • Assembly Overview - Oil Lines For Turbocharger
          • Assembly Overview - Charge Air Cooling System
        • Technical Values - Group 24 - Fuel System, Electronic Injection
          • Assembly Overview - Intake-Air Distributor
          • High-Pressure Pump
          • Oxygen Sensors
        • Technical Values - Group 26 - Exhaust System
          • Assembly Overview - Exhaust Manifold
          • Assembly Overview - Catalytic Converter/Exhaust Manifold Holder
          • Exhaust System
          • Heat Shields On Exhaust System, Heat Protection
          • Heat Shield On Catalytic Converter With Particle Filter
          • Catalytic Converter With Particle Filter
        • Technical Values - Group 27 - Starter, Power Supply, Cruise Control
          • Starter, Generator
          • Adaptive Cruise Control
          • Battery
        • Technical Values - Group 28 - Overview Of Ignition System, Engine Sensors
          • Ignition, Engine Sensors
    • Map - Exhaust Systems
      • Exhaust Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Catalytic Converters
        • Exhaust And Tail Pipes
        • Exhaust Connections
        • Hangers
        • Heat Risers (Mechanical EFE Devices)
        • Heat Shields
        • Manifolds (Cast And Tube Type)
        • Mechanical EFE Devices
        • Muffler Valve
        • Mufflers And Resonators
      • Reason Code Explanation
  • Heating, Ventilation & A/C (HVAC)
    • Map - Heating, Ventilation, & Air Conditioning
      • Heating, Ventilation & Air Conditioning Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Accumulators
        • Actuators (Electrical)
        • Actuators (Vacuum)
        • Air Conditioning Fittings
        • Air Conditioning Hoses
        • Air Conditioning Metal Lines
        • Air Control Doors
        • Air Dams (External)
        • Air Distribution System
        • Belts
        • Blend Doors
        • Blower Fans (Blower Wheel Or Squirrel Cage)
        • Blower Motors
        • Blower Resistors
        • Blower Switches
        • Cabin Air Filters
        • Circuit Breakers
        • Compressor Clutch Assemblies
        • Compressors
        • Condenser Air Seals
        • Condenser Fan Motors
        • Condensers
        • Connectors
        • Control Cables
        • Control Heads (Function Selectors)
        • Control Linkages
        • Control Modules
        • Coolant
        • Cooling Fan Blades
        • Cooling Fan Clutches
        • Cooling Fan Motors
        • Evaporator Drain Tubes
        • Evaporator Filters
        • Evaporator Pressure Regulators (EPRS)
        • Evaporators
        • Expansion Valves
        • Function Selectors
        • Fuses, Fusible Links And Circuit Breakers
        • Fusible Links
        • Gaskets
        • Heater Cases
        • Heater Control Valves
        • Heater Cores
        • Heater Hoses
        • High Pressure Relief Valves (HPRV)
        • Idlers
        • In-Line Filters
        • Metal Fittings
        • Metal Lines
        • Mix And Air Control Doors (Blend Doors)
        • ORIFACE Tubes
        • O-Rings
        • Pilot-Operated Absolutes (POAS)
        • Plenums
        • Pressure Control Valves
        • Pressure Sensors
        • Pulleys
        • Radiators
        • Receiver-DRIERS
        • Refrigerant Oil
        • Refrigerant
        • Relays
        • Seals
        • Service Ports
        • Spring Lock Couplings
        • Suction Throttling Valves (STVS)
        • Switches (Electrical)
        • TENSIONERS
        • Thermistors And Pressure Sensors
        • Thermostats And Housings
        • Vacuum Hoses And Tubes
        • Vacuum Reservoirs
        • Vacuum Tubes
        • Valves In Receiver (VIRS)
        • Water Pumps (Electric Auxiliary)
        • Wiring Harnesses And Connectors
      • Heating, Ventilation & Air Conditioning System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
  • Identification
    • CANADIAN Model Cross-Reference
      • * Please Read This First *
      • ACURA
      • ASUNA
      • AUDI
      • BMW
      • CHRYSLER Corp.
        • CHRYSLER
        • Dodge
        • Eagle
        • PLYMOUTH
      • General Motors
        • BUICK
        • CHEVROLET
        • GMC
        • OLDSMOBILE
        • Optima
        • PONTIAC
      • HYUNDAI
      • Jaguar
      • KIA
      • MAZDA
      • MERCEDES-BENZ
      • Mercury
      • MERKUR
      • MITSUBISHI
      • NISSAN
      • RENAULT
      • SATURN
      • Smart
      • SUBARU
      • SUZUKI
      • TOYOTA
      • VOLKSWAGEN
      • VOLVO
      • All Others
  • Metric Conversions
    • Engine Displacement Conversion Table - ECAT
      • Conversion Table
    • Metric Conversions
      • Metric Conversions
        • Notes
        • Length
        • Volume
        • Torque
        • Pressure
      • Conversion Factors
  • OEM General Information
    • 01 - Sales Check -- 982 - BOXSTER/CAYMAN
      • WM, 010100 - Sales Check
      • WM, 0101IN - Removing Transport Protection
        • Removing External Transport Protection
        • Removing Internal Transport Protection
      • WM, 0101IN - Checking Exterior Equipment And Paintwork
        • Checking Exterior Equipment And Paintwork
          • Notes
          • Checking Exterior Equipment
      • WM, 0101IN - Checking Vehicle Identification Number (VIN)
        • Checking Vehicle Ident. No. For Conformity
      • WM, 0101IN - Checking Glazing
        • Check Glazing
      • WM, 0101IN - Mobile Roofs: Check Function
        • Technical Values
        • Check Convertible Top
      • WM, 0101IN - Interior Equipment - Visual Inspection For Damage And Soiling
        • Checking Interior Equipment
        • Checking Seat Belts
          • Function Test
          • Condition Inspection
      • WM, 0101IN - Alarm System: Checking Operation Of Monitoring Devices
        • Tools
        • Alarm System: Checking Operation Of Monitoring Devices
      • WM, 0101IN - Checking Vehicle Equipment For Completeness
        • Checking Vehicle Equipment For Completeness
        • Tools And Materials
          • Tools
          • Vehicle Key
    • 0X - Complete Vehicle - General -- 982 - BOXSTER/CAYMAN
      • WM, 0X00 - 3D PDF Control Units
      • WM, 0X00IN - Overview Of A, B And C Markets
        • Up To Model Year 2018
          • Overview Of A, B And C Markets
        • Model Year 2019
          • Overview Of A, B And C Markets
        • From Model Year 2020
          • Overview Of A, B And C Markets
      • WM, 0X00IN - Test Drive - Maintenance
      • WM, 0X00IN - Test Drive - Sales Check
      • WM, 0X00IN - Vehicle Coordinate System
        • Vehicle Coordinate System
      • SY, 0X00IN - Eliminating Noise Symptoms: Overview Of Materials For Eliminating Disturbing Noises
        • Parts
        • General Information
          • Symptoms
          • Causes And Remedial Action
        • Tools And Materials
      • WM, 0X01IN - Checking The Function Of The Vehicle's Lights
        • Technical Values
        • Checking Lights
        • Adjusting Main Headlights
      • WM, 0X01IN - Checking Doors And Lids
        • Function Test On Front Lid Lock
        • Checking Lid Lock, Front And Rear
        • Checking Safety Hook, Front Lid
      • WM, 0X01IN - Checking Operation Of Electrical Equipment As Well As Warning And Indicator Lights
        • Checking Electrical Equipment
      • WM, 0X01IN - Diagnostic System: Reading Out Fault Memory And Activating Systems
        • Tools
        • Performing Vehicle Handover
      • WM, 0X03IN - Checking Windscreen Wiper And Washer System
        • Windscreen Washer/Headlight Cleaning System
          • Windscreen Wiper/Headlight Cleaning System
          • Mixture Ratio Of Fluids For The Windscreen Washer System
          • Checking Wiper Blades
    • 5X Body - General -- 982 - BOXSTER/CAYMAN
      • WM, 5X00IN01 Safety Instructions
        • Safety Instructions For Raising Vehicles
          • Danger Of Injury When Raising Vehicles Warning DANGER
          • Damage When Raising Vehicles Warning DANGER
        • General Warning Notes
          • Danger Of Injury While Welding
          • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
        • Safety Instructions For Grinding Work
          • Notes
          • Safety Instructions For Fuel Tank
          • Safety Instructions For Air Conditioning
        • Safety Instructions For Adhesive Bonding
          • Danger Of Poisoning And Injury When Using Adhesive
          • Safety Instructions For Teromix-6700 Two-Component Adhesive
        • Safety Instructions For Assembly Work
          • Safety Instructions For Sharp-Edged Body And Unit Parts
          • Safety Instructions For Airbag System
        • Safety Instructions For Corrosion Protection
          • Safety Instructions For Stopper Location Plan (Body)
      • WM, 5X00IN02 Protection For Electric Components During Body Repairs
        • Information On Electronic Control Units
        • Protection Against OVERVOLTAGE When Performing Welding Work
        • Replacing Control Units
      • WM, 5X00IN03 Corrosion Protection Measures During Repair Work
        • Measures For Maintaining Long-Term Body Protection
        • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
          • Prerequisite For Maintaining The Long-Life Guarantee
      • WM, 5X00IN07 General Information And Notes On Quality
        • Tools
        • Battery Trickle Charge
          • Battery Trickle Charging
        • Information On Control Units
          • Information On Removing And Installing Control Units
          • Protection Against Overvoltage When Performing Welding Work
          • Information For Replacing Control Units
        • Information On Maintaining Long-Life Corrosion Protection Or The Long-Life Guarantee
          • Information On Maintaining Long-Life Corrosion Protection
          • Information On Maintaining The Long-Life Guarantee
      • WM, 5X00IN10 Welding Aluminium
        • Tools
        • Technical Values
        • Welding Aluminium
      • WM, 5X00IN11 Stud Welding
        • Tools
        • Technical Values
        • Preparing For Stud Welding
        • Welding Parameters
        • Welding Studs
      • WM, 5X00IN20 Working With Body Structural Foam
        • Tools
        • Technical Values
        • General Information
          • Version
          • Safety Data Sheet
          • Shelf Life
          • Disposal
          • Bonding Log
          • Structural Foam In Body Building
        • Working With Body Structural Foam
          • General Information
          • Preparing Bonding Surfaces
            • Initial Cleaning
            • Cleaning
          • Processing Conditions
          • Joining Process
          • Hardening
          • Assembly Strength
          • Endurance Strength
          • Corrosion Protection
          • Work Sample
      • WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00
        • Tools
        • Technical Values
        • General Information
          • Version
          • Safety Data Sheet
          • Shelf Life
          • Disposal
          • Bonding Log
        • Information On Structural Bonding In Vehicle Manufacturing
          • General
          • Combined Joining Processes
          • Separating Body Components
          • Welding In Body Components
        • Working With Body Structural Adhesive Pah.071.781.00
          • General Information
          • Preparing Bonding Surfaces
            • Initial Cleaning
            • Cleaning
            • Sand/Grind Until Bare
          • Processing Conditions
          • Joining Process
          • Hardening
          • Assembly Strength
          • Endurance Strength
          • Corrosion Protection
          • Work Sample
      • WM, 5X00IN22 Working With Body Foam Filler
        • Technical Values
        • General Information
          • Version
          • Safety Data Sheet
          • Shelf Life
          • Disposal
          • Bonding Log
          • Foam Filler In Body Building
        • Working With Body Foam Filler
          • General Information
          • Preparing Bonding Surfaces
            • Initial Cleaning
            • Cleaning
          • Processing Conditions
          • Joining Process
          • Hardening
          • Subsequent Work
          • Assembly And Endurance Strength
      • WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints
        • Parts
        • Tools
        • General Information
        • Releasing Joint Connections
          • Punch Rivets
          • Pressing Out Punch Rivets
          • Punch And Bottom Die Pairs
          • Pulling Punch Rivets
          • Welding Parameters For Pulling Punch Rivets
          • Penetrated Joints
          • Loosening Penetrated Joints
        • Making Joint Connection
          • Setting Blind Rivets
          • Setting Flow-Form Rivets
      • WM, 5X00IN24 Setting Self-Tapping Screws
        • Parts
        • Tools
        • Technical Values
        • General Information
        • Setting Self-Tapping Screws
      • WM, 5X00IN25 Making Ground Connections
        • Parts
        • Tools
        • Technical Values
        • Making Ground Connection Using A Through Bolt
        • Making Ground Connection Using A Rivet Nut
      • WM, 5X00IN26 Replacing Coarse Threaded Bolts
        • Parts
        • Tools
        • Technical Values
        • Replacing Coarse Threaded Bolts
        • Subsequent Work
      • WM, 5X00IN33 Thread Repairs For Threaded Bushes With Collar
        • Thread Repairs For Threaded Bushes With Collar
      • WM, 5X00IN34 Thread Repairs For Threaded Bushes Without Collar
        • Tools
        • Repair Procedure For Threaded Bush Without Collar
      • WM, 5X00IN61 Work Sequence For Accident Repairs
        • Work Sequence For Accident Repairs
          • Procedure For Accident Repairs
          • Repairs
          • Replacement
      • WM, 5X00IN62 Procedure For Damage Diagnosis
        • Tools
        • Notes
        • Procedure For Damage Diagnosis
        • Identifiable Deformations On The Body Structure
        • No Identifiable Deformations On The Body Structure
      • WM, 5X00IN83 Connecting Elements For Body Repairs
        • Parts
        • Connecting Elements For Body Repairs
          • Rivets
          • Special Elements
          • Adhesive And Filler
      • WM, 5X00IN Diagram: Stopper Plan
        • Diagram: Stopper Plan
          • A-Pillar - Cabriolet
          • A-Pillar - Coupe
          • Side Panel And Door Sill
          • Top Of Floor
          • Lower Side Member And Bottom Of Floor
          • Lower Rear End
          • Rear End
          • Upper Body Front Section
          • Top Side Of Body Front Section
          • Firewall On Left-Hand Drive Vehicle
          • Firewall On Right-Hand Drive Vehicle
          • Bottom Of Floor
          • Lower Body Front Section
      • WM, 5X00IN Vehicle Identification Number
        • Tools
        • Technical Values
        • Re-Imprinting New Vehicle Identification Number
          • Information
        • Spacer For Replacing The Vehicle Identification Number
        • Encoding The Vehicle Ident. No.
          • Encoding Vehicle Identification Number
          • Model Year Allocation
          • Allocation Of Position 8 - Model Type
          • Allocation Of Production Month
          • Allocation Of Production Year
      • WM, 5X00IN Seam Seal
        • Parts
        • Add-On Parts
          • Instructions For Sealing Seams
          • Door
          • Rear Lid
        • Unpainted BODYSHELL
          • Upper Body Front Section
          • Upper Body Front Section, Front
          • Upper Body Front Section (Plenum Panel)
          • Body Front Section And Inner A-Pillar
          • Body Front Section And Outer A-Pillar
          • Side Of Body Front Section
          • Inner Body Front Section And Top Of Floor
          • Bulkhead And Centre Floor
          • Wheel Housing And Upper Rear Side Section
          • Lower Body Front Section
          • Lower Side Member And Bottom Of Floor
          • Lower Engine Compartment Bulkhead
          • Upper Rear End
          • Lower Rear End
          • Lower Side Of Rear End
          • Upper Side Of Rear End
      • WM, 5X00IN Exterior Colors
        • Exterior Colors - Solid Paint System
        • Exterior Colors - Metallic Paint System
      • WM, 5X00IN Cavity Preservation
        • Add-On Parts
        • Door
        • Unpainted BODYSHELL
        • Upper Body Front Section
        • Bottom Of Front Of Vehicle
        • Side Member
        • Bottom Of Rear End
        • Top Of Rear End
      • WM, 5X00IN Data Plates
        • Diagram: Data Plates
          • Rear And Left Side Of Vehicle
          • Front And Right Side Of Vehicle
      • WM, 5X00IN Information On Aluminium Repairs
        • Tools
        • Technical Values
        • List Of Materials
        • Damage Diagnosis
          • Damage Diagnosis On Aluminium Components
        • Repairs
          • Reshaping
          • Removing Dents On Accessories
        • Occupational Safety
          • Working On Surfaces
          • Corrosion Protection Measures
      • WM, 5X00IN Gap Dimension
        • Technical Values
        • Lighting
          • Gap Dimensions Of Main Headlights
          • Gap Dimensions Of Tail Lights
        • Windows
          • Gap Dimensions For Windscreen
        • Front
          • Gap Dimensions Of Front Lid
          • Gap Dimensions Of Front Wing
          • Rear
            • Gap Dimensions Of Rear Lid
            • Gap Dimensions For Rear Apron
            • Gap Dimensions Of Rear Spoiler
        • Gap Dimensions - Side
          • Gap Dimensions Of Front Door
      • WM, 5X00IN Underbody Protection
        • Tools
        • Tools And Materials
          • Tools
          • Materials
        • Diagram: Underbody Protection
          • Overview Diagram - Underbody Protection
          • Overview Diagram - Lower Side Member And Floor
          • Overview Diagram - Lower Rear End
      • WM, 5X00IN Body Parts Of Various Sheet-Steel Strengths
        • List Of Materials
        • High-Strength Steel
        • Very-High-Strength Steel
        • Ultra-High-Strength Steel
        • Separation Points
        • Welding Work
      • WM, 5X00IN Technical Values
        • Technical Values
          • Overview
          • Wheel Housing Liner, Front
          • Underbody Panelling
          • Lid Lock
          • Front Lid
          • Working On Rear Lid
          • Front Door
          • Technical Values For Door Arrester
          • Engine Compartment Lid
          • Technical Values
          • B-Pillar Seal
          • Technical Values - Front Wing
    • PORSCHE Dynamic Repair -- 982 - BOXSTER/CAYMAN
      • WM, 0720IN - Glass Repairs
        • Tools
        • Information On Glass Repairs
        • Glass Repairs
        • Technical Values
        • Conditions For Repairs
        • Preparatory Work
        • Repair Procedure
      • WM, 0730IN - Dent Repairs
        • Tools
        • General Information
        • Procedure
      • WM, 0740IN - Interior Cosmetic Repairs
        • Tools
        • Technical Values
        • General Information
        • Creating Pattern Imprint
        • Vinyl Repairs
        • Leather Repairs
        • Painting And Dyeing
      • WM, 0750IN - Paint Repairs
        • General Information And Repair Areas
      • WM, 0760IN - Alloy Wheel Reconditioning
        • Repair Restrictions And Conditions
      • WM, 0770IN - Plastic Repairs
        • Tools
        • Information On Plastic Repairs
        • Plastic Repairs
  • Maintenance Reminder Light (Reset Procedures)
    • Emissions Maintenance Reminder
      • Notes
      • Emissions Maintenance Reminder Reset Procedure
    • Maintenance Service Reminder
      • Notes
      • Maintenance Service Reminder Reset - Procedure 01
        • Notes
        • PIWIS Tester 9718
        • PIWIS Tester II 9818
        • PIWIS Tester 3 9900
      • Maintenance Service Reminder Reset - Procedure 02
      • Maintenance Service Reminder Reset - Procedure 03
    • Timing Belt Tension Reminder
      • Notes
      • Timing Belt Tension Reminder Reset Procedure
    • Tire Pressure Monitor System Reminder
      • Notes
      • TPMS Wheel Electronics Identification
      • TPMS Reminder Reset - Procedure 01
      • TPMS Reminder Reset - Procedure 02
        • Notes
        • Tire Pressure Monitor System Reset
        • "Selection After Warning" Reset
          • Notes
          • Adding Air
          • Wheel Change
          • Sealing Set
      • TPMS Reminder Reset - Procedure 03
  • Steering
    • Map - Steering, Suspension, Wheel Alignment, Wheels & Tires
      • Steering & Suspension Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Wheel And Tire
        • Notes
        • Tires
        • Mounting Tires
        • Vehicle Tire Placard
        • Tire Rotation
        • Wheel Lug Nut Torque & Clamping Force
        • Popular Tire Rotation Patterns
        • Wheels And Rims
        • Tire Pressure Monitoring Systems
      • Steering & Suspension CHECKSHEET
      • Wheels & Tires CHECKSHEET
      • Steering And Suspension, Wheel Alignment, Wheels And Tires
        • Notes
        • Active Handling
        • Active Suspension Control Modules
        • Active Variable Ratio Steering
        • Active Yaw Control
        • Adaptive Cruise Control
        • Advance TRAC
        • Air Bags
        • Air Ride Control Modules
        • Air Ride Suspension Torsion Springs (Counter Balancing)
        • Air Ride Suspension
        • Air Ride Tubes
        • Air Shocks And Air Struts
        • Air Spring Valves
        • Air Springs
        • Air Suspension Control Valves
        • Air Suspension DRIERS
        • Axle Acceleration Sensor
        • Ball Joints
        • Body Acceleration Sensor
        • Bushings
        • Center Links
        • Compressors
        • Continuous Damping Control
        • Control Arm Shafts
        • Control Arms
        • Control Modules
        • Distance Regulation Control Module
        • Distance Regulation Sensor
        • Drag Links
        • Dynamic Stability Control
        • Dynamic Stability Traction Control
        • Electronic Ride Control Shocks And Struts
        • Electronic Stability Control
        • Electronic Suspension System
        • Flex Couplers
        • Gaskets
        • Height Sensors
        • Hydraulic Hoses
        • Hydraulic Power Steering Pumps
        • Hydraulic Suspension Hoses
        • Hydraulic Suspension Pumps
        • Idler Arms
        • Intermediate Shaft U-Joints
        • King Pins
        • Modules
        • Pitman Arms
        • Power Steering Belts
        • Power Steering Coolers
        • Power Steering Fluid
        • Power Steering Hoses
        • Power Steering Lines (Steel)
        • Power Steering Pumps - Electric
        • Power Steering Pumps
        • Radar Sensor
        • Radius Arms
        • Relay Rods
        • Relays
        • Sensors
        • Shock Absorbers, Strut Cartridges And Strut Assemblies
        • Spindles
        • Springs, Coil, Leaf And Torsion Bars
        • STABILITRAC
        • Stability Management System
        • Steering Angle Sensor
        • Steering Arms
        • Steering Couplers
        • Steering Dampers
        • Steering Gears (Except Rack And Pinion)
        • Steering Gears, Rack And Pinion
        • Steering Knuckles
        • Strike Out Bumpers
        • Strut Bearing Plate Assemblies
        • Strut Rods
        • Suspension Pumps (Hydraulic)
        • Sway Bar Links
        • Sway Bar Mounting Bushings
        • Sway Bars
        • Switches
        • Tie Rod Ends (Inner And Outer)
        • Tire Pressure Monitoring System
        • Tire Pressure Sensors
        • Tires
        • Torque Sensor
        • Torsion Springs
        • Track Bar Bushings
        • Track Bars
        • Trailing Arm Bushings
        • Trailing Arms
        • Valve Stems
        • Vehicle Dynamics Control
        • Vehicle Speed Sensor
        • Vehicle Stability Assist
        • Vehicle Stability/Skid Control
        • Warning Lamps
        • Wheel Alignment
        • Wheel Attachment Hardware
        • Wheel Bearings, Races And Seals
        • Wheels (Rims)
        • Wiring Harnesses And Connectors
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Wheel Alignment Theory & Operation - General Information
      • * Please Read This First *
      • Pre-Alignment Instructions
        • Notes
        • General Alignment Checks
      • Adjustments
        • Notes
        • Camber
        • Caster
        • Toe-In Adjustment
        • Toe-Out On Turns
        • Steering Axis Inclination
  • Suspension
    • 4X Chassis - General 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 4X001N Tightening Torques For Steering
        • Technical Values
        • Tightening Torques For Steering
          • Steering Gear, Tie Rod
          • Steering Column, Steering Wheel
      • WM, 4X001N Removing Transport Lock (Spring Strut Locking Devices]
        • Spring Strut Locking Device Information
        • Removing Spring Strut Locking Devices
      • WM, 4X00IN Lifting The Vehicle
        • Lifting The Vehicle
      • WM, 4X001N General Information On Tyre Pressure Monitoring (TPM)
        • Tools
        • General Information On Tyre Pressure Monitoring (TPM)
          • Design And Operating Principle
          • Transmission Modes
        • Teaching Tyre Pressure Monitoring (TPM)
          • General Information
          • Teaching While Driving
          • Teaching While Stationary
      • WM, 4X001N Tightening Torques For Brake Mechanism/Brake Hydraulic System
        • Technical Values
        • Tightening Torques For Brake Mechanism
          • Electric Parking Brake
          • Brake Disc, Brake Cover Plate
          • Pedals, Brake Pedal, Mounting Saddle
        • Tightening Torques For Brake Hydraulics
          • Brake Lines
          • Brake Calliper
          • Brake Master Cylinder, Brake Booster, Vacuum Pump
          • Hydraulic Unit
          • Rotation-Rate Sensor
      • WM, 4X001N Tightening Torques For Front Axle
        • Technical Values
        • Tightening Torques For Front Axle
          • Front-Axle Carrier
          • Front-Axle Support
          • Wheel Bearing Housing
          • Trailing Arm
          • Damper Strut
          • Sensor For Body (PASM)
          • Anti-Roll Bar, Connecting Link
          • Wheel Mounting
      • WM, 4X001N Tightening Torques For Rear Axle
        • Technical Values
        • Tightening Torques For Rear Axle
          • Rear Axle Cross Member, Rear Axle Carrier Side Part, Support Plate, V-Strut
          • Trailing Arm
          • Wheel Bearing Housing
          • Spring Strut
          • Sensor For Body (PASM)
          • Anti-Roll Bar, Connecting Links
          • Drive Shaft
          • Wheel Mounting
      • WM, 4X001N Safety Instructions And Information For Carrying Out Repairs On The Chassis
        • General Warning Notes
          • Fitting Chassis Components
          • Spring Struts/Coil Springs
          • Wheels And Tyres
          • Working On Vehicles With PSM
          • Brake System
          • Handling Airbag Systems
      • WM, 4X001N Brake Disc Measurement Sheet
        • Information
          • Brake Disc Measurement Sheet
      • WM, 4X001N Braking Performance Test - Data For Compulsory Vehicle Testing As Per 29 STVZO (German Road Traffic Regulations) As Of Model Year C (2012)
        • Braking Performance Test - Data For Compulsory Vehicle Testing As Per 29 STVZO (German Road Traffic Regulations]
  • Traction Control Disable Procedures
    • Traction Control Disable
  • Trouble Shooting - Manual Transmission - General Information
    • * Please Read This First *
    • Introduction
• Heating, Ventilation & A/C (HVAC)
  • General Servicing
    • 8X - Air Conditioning - General -- 982 - BOXSTER/CAYMAN
      • WM, 8X00IN Technical Values - Air Conditioning
        • Technical Values
        • Technical Values - Heating
          • Valve Holder To Body
        • Technical Values - Ventilation
          • Air Inlet
          • Heating/Fresh-Air Unit
          • Vacuum Unit
        • Technical Values - Air Conditioning
          • Air-Conditioning Compressor
          • Condenser
          • Desiccator
          • Expansion Valve
          • Pressure Switch
          • Compressor/Condenser Line (Section From Engine Compartment To Rear Underbody Connection Point)
          • Compressor/Evaporator Line (Section From Engine Compartment To Rear Underbody Connection Point)
          • Compressor/Condenser Line (Underbody Section)
          • Compressor/Evaporator Line (Underbody Section)
          • Compressor/Condenser Line (Section From Front Underbody Connection Point To Condenser)
          • Compressor/Evaporator Line (Section From Front Underbody To Evaporator)
          • Condenser/Desiccator Line (Wheel Housing Connection Point)
      • WM, 8X00IN Instructions For Repairing Air-Conditioning Systems And Storing Spare Parts
        • Instructions For Repairing Air-Conditioning Systems And Storing Spare Parts
      • WM, 8X00IN Instructions For Carrying Out General Repairs On Vehicles With Auxiliary Heating
        • Information
          • Instructions For Carrying Out General Repairs On Vehicles With Auxiliary Heating
      • WM, 8X00IN Safety Regulations For Extraction And Filling Systems
        • Safety Regulations For Extraction And Filling Systems
      • WM, 8X00IN Safety Measures When Working On Vehicles With Auxiliary Heating
        • Information
          • Safety Measures When Working On Vehicles With Auxiliary Heating
      • WM, 8X00IN Nominal Values For Pressures And Temperatures
        • Tools
      • WM, 8X00IN Information On Refrigerant R1234YF
        • Information
          • Information On Refrigerant R1234Yf
      • WM, 8X00IN Safety Regulations For Working On Air-Conditioned Vehicles And Handling Refrigerant
        • General Safety Regulations For Refrigerants
        • Emptying The Refrigerant Circuit
        • Working On The Refrigerant Circuit
        • Painting Work On Vehicles With Air Conditioning
        • Note On General Repairs
      • WM, 8X00IN Overview Of Adapters For Cleaning The Refrigerant Circuit
        • Tools
        • Overview Of Adapters
          • Overview Of Adapters - Boxster/Cayman
      • WM, 8X00IN Safety Regulations For Handling Air Conditioning Servicing Equipment, Extraction And Filling Systems
        • Safety Regulations For Extraction And Filling Systems
      • WM, 8X00IN Technical Data For Air-Conditioning System With R1234YF And R134A
        • Technical Data For Air-Conditioning System With R1234YF And Refrigerant Oil SP-A2
        • Technical Data For Air-Conditioning System With Refrigerant R134A And Refrigerant Oil SP-A2
      • WM, 8X00IN Rules Relating To Cleanliness For Working On The Auxiliary Heating System And Fuel System
        • Information
          • Rules Relating To Cleanliness For Working On The Auxiliary Heating System And Fuel System
  • HVAC Control Systems
    • 80 Heater -- 982 - BOXSTER/CAYMAN
      • WM, 805519 Removing And Installing Front FOOTWELL Outlet Vent
        • Component Information
          • Installation Position Of Front Footwell Outlet Vents
        • Preliminary Work
          • Preliminary Work On Driver's Side
          • Preliminary Work On Passenger's Side
        • Removing And Installing Front FOOTWELL Outlet Vent
          • Removing And Installing Front Footwell Outlet Vent On Driver's Side
          • Removing And Installing Front Footwell Outlet Vent On Passenger's Side
        • Subsequent Work
          • Subsequent Work On Driver's Side
          • Subsequent Work On Passenger's Side
      • WM, 807019 Removing And Installing Solenoid Valve
        • Tools
        • Technical Values
        • Information
          • Installation Position Of Solenoid Valve
        • Preliminary Work
          • Preliminary Work For Solenoid Valve
        • Removing Solenoid Valve
        • Installing Solenoid Valve
        • Subsequent Work
          • Subsequent Work For Solenoid Valve
      • WM, 807219 Removing And Installing Vacuum Unit
        • Tools
        • Technical Values
        • Information
          • Installation Position Of Vacuum Unit
        • Preliminary Work
          • Preliminary Work For Vacuum Unit
        • Removing Vacuum Unit
        • Installing Vacuum Unit
        • Subsequent Work
          • Subsequent Work For Vacuum Unit
    • 85 Ventilation -- 982 - BOXSTER/CAYMAN
      • WM, 850819 Removing And Installing Air Intake Pre-Filter
        • Information
          • Installation Position Of Air Intake Pre-Filter
        • Preliminary Work
        • Removing And Installing Air Intake Pre-Filter
        • Subsequent Work
      • WM, 851419 Removing And Installing Air Inlet
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Air Inlet
        • Installing Air Inlet
        • Subsequent Work
      • WM, 851519 Removing And Installing Heating/Fresh Air Unit
        • Tools
        • Technical Values
        • Component Information
          • Installation Position Of Heating/Fresh-Air Unit
        • Preliminary Work
        • Removing Heating/Fresh Air Unit
        • Installing Heating/Fresh Air Unit
        • Subsequent Work
      • WM, 851819 Removing And Installing Particle Filter
        • Component Information
          • Installation Position Of Particle Filter
        • Preliminary Work
        • Removing And Installing Particle Filter
        • Subsequent Work
      • WM, 852219 Removing And Installing Technical Equipment Space Cover
        • Information
          • Installation Position
        • Removing Technical Equipment Space Cover
        • Installing Technical Equipment Space Cover
      • WM, 853019 Removing And Installing Heater/Fresh-Air Blower Motor
        • Component Information
          • Installation Position Of Heating/Fresh-Air Fan Motor
        • Preliminary Work
        • Removing And Installing Heater/Fresh-Air Blower Motor
        • Subsequent Work
      • WM, 855319 Removing And Installing Centre Air Vent
        • Tools
        • Removing And Installing Centre Air Vent
      • WM, 855919 Removing And Installing Air Vent For Door Window
        • Tools
        • Removing And Installing Air Vent For Door Window
      • WM, 856519 Removing And Installing Ventilation Cover
        • Preliminary Work
        • Removing Ventilation Cover
        • Installing Ventilation Cover
        • Subsequent Work
      • WM, 857819 Removing And Installing Servo Motor For Fresh Air/Recirculated Air
        • Tools
        • Component Information
          • Installation Position Of Servo Motor For Fresh Air/Recirculated Air
        • Preliminary Work
        • Removing And Installing Servo Motor For Fresh Air/Recirculated Air
        • Teaching Servo Motors
        • Subsequent Work
      • WM, 857819 Removing And Installing Servo Motor For Ram Air
        • Tools
        • Component Information
          • Installation Position Of Servo Motor For Ram Air
        • Preliminary Work
        • Removing And Installing Servo Motor For Ram Air
        • Teaching Servo Motors
        • Subsequent Work
    • 87 Air Conditioning -- 982 - BOXSTER/CAYMAN
      • WM, 870101 Checking Air Conditioning
        • Tools
        • Troubleshooting The Air-Conditioning System Following Complaints About Cooling Output
        • Troubleshooting The Air Conditioning System Following Complaints About Noises
      • WM, 870129 Cleaning Refrigerant Circuit
        • Tools
          • Overview
          • Air Conditioning Servicing Equipment
          • Adapters For Cleaning The Refrigerant Circuit
        • Preliminary Work
          • Preliminary Work For Cleaning Refrigerant Circuit
        • Cleaning Refrigerant Circuit
          • Warning Notes For Handling Refrigerant
          • Converting Expansion Valve For The Adapter
          • General Installation Sequence
        • Subsequent Work
          • Subsequent Work For Cleaning Refrigerant Circuit
      • WM, 870219 Removing And Installing Air-Conditioning System Control
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Air-Conditioning System Control
        • Subsequent Work
      • WM, 870255 Replacing Air Conditioning Control
        • Tools
        • Preliminary Work
          • Preliminary Work For Air Conditioning Control
          • Replacing Air Conditioning Control
          • Enabling Sport Chrono Function
      • WM, 870317 Draining And Filling Refrigerant R134A
        • General Warning Notes
          • Warning Notes For Handling Refrigerant
        • Technical Values
          • Air Conditioning Servicing Equipment
        • Draining And Filling In Refrigerant
          • Assembly Work Involving The Refrigerant System
        • General Installation Sequence
      • WM, 870317 Draining And Filling Refrigerant R1234YF
        • Tools
        • General Warning Notices
          • Warning Notes For Handling Refrigerant
        • Technical Values
          • Air Conditioning Servicing Equipment
        • Draining And Filling Refrigerant
          • Assembly Work Involving The Refrigerant System
          • General Installation Sequence
        • Filling Contaminated Refrigerant Into A Recycling Bottle For Analysis, Treatment (Or Disposal)
          • Information And Tools
          • Transferring Refrigerant Using A Supercooled Recycling Bottle
          • Subsequent Work After Extracting/Disposing Of Contaminated Refrigerant In The Refrigerant Circuit
      • WM, 871319 Removing And Installing Temperature Sensor For Evaporator
        • Component Information
          • Installation Position Of Temperature Sensor For Evaporator
          • Removing And Installing Temperature Sensor For Evaporator
      • WM, 871419 Removing And Installing Sun Sensor
        • Component Information
          • Installation Position Of Sun Sensor
          • Removing And Installing Sun Sensor
      • WM, 872019 Removing And Installing Servo Motor For FOOTWELL Ventilation
        • Tools
        • Component Information
          • Installation Position Of Servo Motor For Footwell Ventilation
        • Preliminary Work
        • Removing And Installing Servo Motor For FOOTWELL Ventilation
        • Teaching Servo Motors
        • Subsequent Work
      • WM, 872019 Removing And Installing Servo Motor For Bypass Ventilation
        • Tools
        • Component Information
          • Installation Position Of Servo Motor For Bypass Ventilation
        • Preliminary Work
        • Removing And Installing Servo Motor For Bypass Ventilation
        • Teaching Servo Motors
        • Subsequent Work
      • WM, 872019 Removing And Installing Servo Motor For Temperature Valves On Driver's Side
        • Tools
        • Component Information
          • Installation Position Of Servo Motor For Temperature Valves On Driver's Side
        • Preliminary Work
        • Removing And Installing Servo Motor For Temperature Valves On Driver's Side
        • Teaching Servo Motors
        • Subsequent Work
      • WM, 872019 Removing And Installing Servo Motor For Centre And Side Air Vents
        • Tools
        • Component Information
          • Installation Position Of Servo Motor For Centre And Side Air Vents
        • Preliminary Work
        • Removing And Installing Servo Motor For Centre And Side Air Vents
        • Teaching Servo Motor For Centre And Side Air Vents
        • Subsequent Work
      • WM, 872019 Removing And Installing Servo Motor For Temperature Valves On Passenger's Side
        • Tools
        • Component Information
          • Installation Position Of Servo Motor For Temperature Valves On Passenger's Side
        • Preliminary Work
        • Removing And Installing Servo Motor For Temperature Valves On Passenger's Side
        • Teaching Servo Motors
        • Subsequent Work
      • WM, 872019 Removing And Installing Servo Motor For Defroster
        • Tools
        • Component Information
          • Installation Position Of Servo Motor For Defroster
        • Preliminary Work
        • Removing And Installing Servo Motor For Defroster
        • Teaching Servo Motors
        • Subsequent Work
      • WM, 872219 Removing And Installing Air Quality Sensor
        • Component Information
          • Installation Position Of Air Quality Sensor
        • Preliminary Work
        • Removing And Installing Air Quality Sensor
        • Subsequent Work
      • WM, 873419 Removing And Installing Air-Conditioning Compressor
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work On Air-Conditioning Compressor
        • Removing Air-Conditioning Compressor
        • Installing Air-Conditioning Compressor
        • Replacing Air-Conditioning Compressor
          • Notes
          • Determining Oil Quantity On The "Old" Air-Conditioning Compressor
        • Determining Oil Quantity On The "New" Air-Conditioning Compressor
        • Work Steps For Blocked Or Seized Up Air-Conditioning Compressor
        • Subsequent Work
          • Subsequent Work For Air-Conditioning Compressor
        • Compressor Run-In After Installing A New Air-Conditioning Compressor
      • WM, 874219 Removing And Installing Condenser/Condenser Line
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Condenser/Condenser Line
        • Removing Condenser/Condenser Line
        • Installing Condenser/Condenser Line
        • Subsequent Work
          • Subsequent Work For Condenser/Condenser Line
      • WM, 874319 Removing And Installing Compressor/Condenser Line (Section From Front Underbody Connection Point To Condenser Connection Point)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Compressor/Condenser Line (Section From Front Underbody Connection Point To Wheel Housing Connection Point)
        • General Warning Notes For Working On The Air-Conditioning System
          • Notes
          • Installing Compressor/Condenser Line (Section From Front Underbody Connection Point To Wheel Housing Connection Point)
        • Subsequent Work
          • Compressor/Condenser Line (Section From Front Underbody Connection Point To Wheel Housing Connection Point)
      • WM, 874319 Removing And Installing Compressor/Condenser Line (Underbody Section)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Compressor/Condenser Line (Underbody Section)
        • Removing Compressor/Condenser Line (Underbody Section)
          • General Warning Notes For Working On The Air-Conditioning System
        • Installing Compressor/Condenser Line (Underbody Section)
        • Subsequent Work
          • Subsequent Work For Compressor/Condenser Line (Underbody Section)
      • WM, 874319 Removing And Installing Compressor/Condenser Line (Section From Engine Compartment To Rear Underbody Connection Point)
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
          • Preliminary Work For Compressor/Condenser Line (Section From Engine Compartment To Rear Underbody Connection Point)
        • Removing Compressor/Condenser Line (Section From Engine Compartment To Rear Underbody Connection Point)
        • Installing Compressor/Condenser Line (Section From Engine Compartment To Rear Underbody Connection Point)
        • Subsequent Work
          • Subsequent Work For Compressor/Condenser Line (Section From Engine Compartment To Rear Underbody Connection Point)
      • WM, 874519 Removing And Installing Compressor/Evaporator Line (Section From Front Underbody Connection Point To Evaporator)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Compressor/Evaporator Line (Section From Front Underbody Connection Point To Evaporator)
        • Removing Compressor/Evaporator Line (Section From Front Underbody Connection Point To Evaporator)
        • Installing Compressor/Evaporator Line (Section From Front Underbody Connection Point To Evaporator)
        • Subsequent Work
          • Subsequent Work For Compressor/Evaporator Line (Section From Front Underbody Connection Point To Evaporator)
      • WM, 874519 Removing And Installing Compressor/Evaporator Line (Underbody Section)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Compressor/Evaporator Line (Underbody Section)
        • Removing Compressor/Evaporator Line (Underbody Section)
          • General Warning Notes For Working On The Air-Conditioning System
        • Installing Compressor/Evaporator Line (Underbody Section)
        • Subsequent Work
          • Subsequent Work For Compressor/Evaporator Line (Underbody Section)
      • WM, 874519 Removing And Installing Compressor/Evaporator Line Section From Engine Compartment To Underbody Connection Point
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
          • Compressor/Evaporator Refrigerant Line Section From Engine Compartment Connection Point To Rear Underbody Connection Point
        • Removing Compressor/Evaporator Line From Engine Compartment Connection Point To Rear Underbody Connection Point
        • Installing Compressor/Evaporator Line Section From Engine Compartment To Underbody Connection Point
          • Removing Compressor/Evaporator Line Section From Engine Compartment To Underbody Connection Point
        • Subsequent Work
          • Subsequent Work For Compressor/Evaporator Refrigerant Line Section From Engine Compartment To Underbody Connection Point
      • WM, 874619 Removing And Installing Condenser/Desiccator Line (Section From Condenser To Wheel Housing Connection Point)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Condenser/Desiccator Line (Section From Condenser To Connection Point In Wheel Housing)
        • Removing Condenser/Desiccator Refrigerant Line (Section From Condenser To Wheel Housing Connection Point)
          • General Warning Notes For Working On The Air-Conditioning System
        • Removing Condenser/Desiccator Refrigerant Line (Section From Condenser To Connection Point In Wheel Housing)
        • Installing Condenser/Desiccator Refrigerant Line (Section From Condenser To Wheel Housing Connection Point)
          • Installing Condenser/Desiccator Refrigerant Line (Section From Condenser To Connection Point In Wheel Housing)
        • Subsequent Work
          • Subsequent Work For Condenser/Desiccator Refrigerant Line (Section From Condenser To Connection Point In Wheel Housing)
      • WM, 874619 Removing And Installing Condenser/Desiccator Line (Section From Wheel Housing Connection Point To Desiccator)
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Line (Section From Wheel Housing Connection Point To Desiccator)
        • Removing Condenser/Desiccator Line (Section From Wheel Housing Connection Point To Desiccator)
        • Installing Condenser/Desiccator Line (Section From Wheel Housing Connection Point To Desiccator)
        • Subsequent Work
          • Subsequent Work For Condenser/Desiccator Line (Section From Wheel Housing Connection Point To Desiccator)
      • WM, 874719 Removing And Installing Evaporator/Desiccator Line
        • Tools
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Evaporator/Desiccator Line
        • Removing Evaporator/Desiccator Line
          • General Warning Notes For Working On The Air-Conditioning System
        • Installing Evaporator/Desiccator Line
        • Subsequent Work
          • Subsequent Work For Evaporator/Desiccator Line
      • WM, 875019 Removing And Installing Condenser
        • Technical Values
        • Preliminary Work
          • Preliminary Work For Condenser
        • Removing Condenser
        • Installing Condenser
        • Subsequent Work
          • Subsequent Work For Condenser
      • WM, 875519 Removing And Installing Dryer
        • Technical Values
        • Information
          • Installation Position Of Desiccator
        • Preliminary Work
          • Preliminary Work For Desiccator
        • Removing Dryer
        • Installing Dryer
          • Installing Desiccator
        • Subsequent Work
          • Subsequent Work For Desiccator
      • WM, 875919 Removing And Installing Outside Temperature Sensor
        • Component Information
          • Installation Position Of Outside Temperature Sensor
        • Preliminary Work
        • Removing And Installing Outside Temperature Sensor
        • Subsequent Work
      • WM, 877019 Removing And Installing Expansion Valve
        • Technical Values
        • Information
          • Installation Position Of Expansion Valve
        • Preliminary Work
          • Preliminary Work For Expansion Valve
        • Removing Expansion Valve
          • General Warning Notes For Working On The Air-Conditioning System
        • Installing Expansion Valve
          • General Warning Notes For Working On The Air-Conditioning System
        • Subsequent Work
          • Subsequent Work For Expansion Valve
      • WM, 877819 Removing And Installing Blower Regulator
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Blower Regulator
        • Subsequent Work
      • WM, 878319 Removing And Installing Pressure Switch
        • Technical Values
        • Information
          • Installation Position Of Pressure Switch
        • Preliminary Work
          • Removing Pressure Switch
        • Removing Pressure Switch
          • General Warning Notes For Working On The Air-Conditioning System
        • Installing Pressure Switch
          • General Warning Notes For Working On The Air-Conditioning System
        • Subsequent Work
          • Subsequent Work For Pressure Switch
• Maintenance
  • Procedures
    • Maintenance - Diagnostics -- 982 - BOXSTER/CAYMAN
      • WM, 0300IN - Running Gear Maintenance: Axle Joints/Drive Shafts
        • Information
          • Axle Joints: Checking Play And Dust Bellows
          • Drive Shafts: Visual Inspection Of Boots
      • WM, 0300IN - Running Gear Maintenance: Steering Gear - Visual Inspection Of Bellows And Tie Rod Joints
        • Testing
          • Checking Bellows
          • Tie Rod Joints: Checking Play And Dust Bellows
      • WM, 0300IN - Ancillary Unit Mounts And Chassis: Visual Inspection Of All Rubber Mountings And Boots For Damage
        • Tools
        • Checking Ancillary Unit Mounts
          • Checking Engine Mounts
          • Checking Transmission Mount
        • Chassis: Visual Inspection Of Rubber Mountings, Joints And Boots
          • Chassis: Visual Inspection Of Rubber-Metal Mounts, Joints And Boots
      • WM, 0300IN - Visual Inspection: Brake Lines/Brake Pads/Brake Discs
        • Information
          • Brake Hoses And Lines
          • Brake System: Visual Inspection Of Brake Pads And Brake Discs For Wear
      • WM, 030300 - Oil Service
        • Oil Service
      • WM, 031800 - Inspection
        • Inspection
        • Maintenance Tasks - Electrical System
        • Maintenance Tasks - Inside The Vehicle
        • Maintenance Tasks - Luggage Compartment
        • Maintenance Tasks - Outside The Vehicle
        • Maintenance Tasks - Under The Vehicle
        • Maintenance Tasks - Engine Compartment
        • Maintenance Tasks - Above The Vehicle
          • Maintenance Tasks - Upper Vehicle
          • Maintenance Tasks - Test Drive
      • WM, 033500 - On-Board Diagnosis Fault Memory
        • Tools
        • Reading Out And Erasing Fault Memory
          • On-Board Diagnosis (OBD)
      • WM, 034201 - Additional Work For Checking Water Drains
        • General Information
        • Checking Water Drains On Sliding Roof
        • Checking Water Drains At The Front
        • Water Drains On Rear Spoiler (PANAMERA Only)
        • Checking Water Drains - Cabriolet
        • Checking Water Drains On Door Sill
        • Checking Water Drain At Charging Socket
        • Checking Water Drain On Filler Flap
    • Maintenance Reminder Light (Reset Procedures)
      • Emissions Maintenance Reminder
        • Notes
        • Emissions Maintenance Reminder Reset Procedure
      • Maintenance Service Reminder
        • Notes
        • Maintenance Service Reminder Reset - Procedure 01
          • Notes
          • PIWIS Tester 9718
          • PIWIS Tester II 9818
          • PIWIS Tester 3 9900
        • Maintenance Service Reminder Reset - Procedure 02
        • Maintenance Service Reminder Reset - Procedure 03
      • Timing Belt Tension Reminder
        • Notes
        • Timing Belt Tension Reminder Reset Procedure
      • Tire Pressure Monitor System Reminder
        • Notes
        • TPMS Wheel Electronics Identification
        • TPMS Reminder Reset - Procedure 01
        • TPMS Reminder Reset - Procedure 02
          • Notes
          • Tire Pressure Monitor System Reset
          • "Selection After Warning" Reset
            • Notes
            • Adding Air
            • Wheel Change
            • Sealing Set
        • TPMS Reminder Reset - Procedure 03
• Restraints
  • Restraints Control Systems
    • 69 Occupant Protection/Personal Protection -- 982 - BOXSTER/CAYMAN
      • WM, 691119 Removing And Installing Front Three-Point Belt
        • Tools
        • Technical Values
        • General Information
        • Preliminary Work
        • General Warning Notices
          • Safety instructions for seat-belt pretensioners
        • Removing Front Three-Point Belt
        • Installing Front Three-Point Belt
        • Subsequent Work
      • WM, 691301 Checking Seat Belts
        • General Warning Notes
        • Checking Seat Belts
          • Checking belt strap
          • Checking locking effect of automatic belt device
          • Checking seat-belt buckle
          • Checking sash guides
          • Checking mounting parts and fastening points
      • WM, 692419 Removing And Installing Front Belt Lock (Folding Sports Bucket Seat)
        • Technical Values
        • General Information
        • Removing And Installing Front Belt Lock (Folding Sports Bucket Seat)
      • WM, 692419 Removing And Installing Front Belt Lock
        • Technical Values
        • General Information
        • Preliminary Work
        • Remove Front Belt Lock
          • Removing front seat-belt buckle warning DANGER
        • Install Front Belt Lock
          • Installing front belt lock
        • Subsequent Work
      • WM, 692619 Removing And Installing Belt Strap Guide (Folding Sports Bucket Seat)
        • Component Information
          • Installation position of belt strap guide (folding sports bucket seat)
        • Preliminary Work For Removing Lower Belt Strap Guide (Inner)
        • Preliminary Work For Removing Lower Belt Strap Guide (Outer)
        • Removing And Installing Lower Belt Strap Guide (Folding Sports Bucket Seat)
        • Removing And Installing Upper Belt Strap Guide (Folding Sports Bucket Seat)
        • Subsequent Work
          • Subsequent work for installing lower belt strap guide (inner)
          • Subsequent work for installing lower belt strap guide (outer)
      • WM, 695119 Removing And Installing Airbag Sensor
        • Technical Values
        • Component Information
          • Installation position
        • General Information
        • Preliminary Work
          • Preliminary work for front airbag sensor
          • Preliminary work for side airbag sensor
        • Removing And Installing Airbag Sensor
          • Removing and installing front airbag sensor
          • Removing and installing side airbag sensor
        • Subsequent Work
          • Subsequent work for front airbag sensor
          • Subsequent work for side airbag sensor
      • WM, 695319 Removing And Installing Airbag Triggering Unit
        • Technical Values
        • Component Information
          • Installation position of airbag triggering unit
        • General Information
        • Preliminary Work
        • Removing And Installing Airbag Triggering Unit
        • Subsequent Work
      • WM, 695355 Replacing Triggering Unit For Airbag
        • Replacing Triggering Unit For Airbag
      • WM, 695419 Removing And Installing Contact Unit
        • Component Information
      • WM, 695819 Removing And Installing Driver's Airbag Unit
        • Component Information
          • Installation position of driver's airbag unit
        • General Information
        • Preliminary Work
        • Remove Driver's Airbag Unit
        • Install Driver's Airbag Unit
        • Subsequent Work
      • WM, 695919 Removing And Installing Passenger's Airbag Unit
        • Technical Values
        • Component Information
          • Installation position of passenger's airbag unit
        • General Information
        • Preliminary Work
        • Removing And Installing Passenger's Airbag Unit
        • Subsequent Work
      • WM, 696119 Removing And Installing Front Pressure Sensor
        • Component Information
          • Installation position
        • General Information
        • Preliminary Work
        • Removing And Installing Front Pressure Sensor
        • Subsequent Work
      • WM, 696319 Removing And Installing Front Side Airbag
        • Technical Values
        • Component Information
          • Installation position of front side airbag
        • General Information
        • Preliminary Work
        • Removing And Installing Front Side Airbag
        • Subsequent Work
      • WM, 696619 Removing And Installing Head Airbag Unit
        • Technical Values
        • General Information
        • Preliminary Work
        • Remove Head Airbag
          • Removing head airbag
        • Install Head Airbag
          • Installing head airbag
        • Subsequent Work
      • WM, 696619 Removing And Installing Head Airbag (Only C02 And C36)
        • Technical Values
        • General Information
        • Preliminary Work
        • Removing Head Airbag (Only C02 And C36)
        • Installing Head Airbag (Only C02 And C36)
        • Subsequent Work
      • WM, 696819 Removing And Installing Occupant Detection Control Unit
        • Component Information
          • Installation position
        • General Information
        • Preliminary Work
        • Remove Occupant Detection Control Unit
          • Removing occupant detection control unit
        • Install Occupant Detection Control Unit
          • Installing occupant detection control unit
        • Subsequent Work
      • WM, 696855 Replacing Occupant Detection Control Unit
        • Information
        • Preliminary Work
        • Replacing Occupant Detection Control Unit
      • WM, 697019 Removing And Installing Pedestrian Protection
        • Technical Values
        • Preliminary Work
        • Removing And Installing Pedestrian Protection
        • Subsequent Work
      • WM, 697219 Removing And Installing Roll-Over Bar
        • Technical Values
        • General Information
        • Preliminary Work
        • Removing And Installing Roll-Over Bar
        • Subsequent Work
      • WM, 697255 Replacing Roll-Over Bar
        • Preliminary Work
        • Replacing Roll-Over Bar
        • Subsequent Work
      • WM, 697819 Removing And Installing Knee Airbag On Driver's Side
        • Technical Values
        • Component Information
          • Installation position of knee airbag on driver's side
        • General Information
        • Preliminary Work
        • Removing Knee Airbag On Driver's Side
        • Installing Knee Airbag On Driver's Side
        • Subsequent Work
      • WM, 697919 Removing And Installing Knee Airbag On Passenger's Side
        • Technical Values
        • Information
          • Component information
        • General Information
        • Preliminary Work
        • Removing Knee Airbag On Passenger's Side
        • Installing Knee Airbag On Passenger's Side
        • Subsequent Work
  • Seat Belts
    • 69 Occupant Protection/Personal Protection -- 982 - BOXSTER/CAYMAN
      • WM, 691119 Removing And Installing Front Three-Point Belt
        • Tools
        • Technical Values
        • General Information
        • Preliminary Work
        • General Warning Notices
          • Safety instructions for seat-belt pretensioners
        • Removing Front Three-Point Belt
        • Installing Front Three-Point Belt
        • Subsequent Work
      • WM, 691301 Checking Seat Belts
        • General Warning Notes
        • Checking Seat Belts
          • Checking belt strap
          • Checking locking effect of automatic belt device
          • Checking seat-belt buckle
          • Checking sash guides
          • Checking mounting parts and fastening points
      • WM, 692419 Removing And Installing Front Belt Lock (Folding Sports Bucket Seat)
        • Technical Values
        • General Information
        • Removing And Installing Front Belt Lock (Folding Sports Bucket Seat)
      • WM, 692419 Removing And Installing Front Belt Lock
        • Technical Values
        • General Information
        • Preliminary Work
        • Remove Front Belt Lock
          • Removing front seat-belt buckle warning DANGER
        • Install Front Belt Lock
          • Installing front belt lock
        • Subsequent Work
      • WM, 692619 Removing And Installing Belt Strap Guide (Folding Sports Bucket Seat)
        • Component Information
          • Installation position of belt strap guide (folding sports bucket seat)
        • Preliminary Work For Removing Lower Belt Strap Guide (Inner)
        • Preliminary Work For Removing Lower Belt Strap Guide (Outer)
        • Removing And Installing Lower Belt Strap Guide (Folding Sports Bucket Seat)
        • Removing And Installing Upper Belt Strap Guide (Folding Sports Bucket Seat)
        • Subsequent Work
          • Subsequent work for installing lower belt strap guide (inner)
          • Subsequent work for installing lower belt strap guide (outer)
      • WM, 695119 Removing And Installing Airbag Sensor
        • Technical Values
        • Component Information
          • Installation position
        • General Information
        • Preliminary Work
          • Preliminary work for front airbag sensor
          • Preliminary work for side airbag sensor
        • Removing And Installing Airbag Sensor
          • Removing and installing front airbag sensor
          • Removing and installing side airbag sensor
        • Subsequent Work
          • Subsequent work for front airbag sensor
          • Subsequent work for side airbag sensor
      • WM, 695319 Removing And Installing Airbag Triggering Unit
        • Technical Values
        • Component Information
          • Installation position of airbag triggering unit
        • General Information
        • Preliminary Work
        • Removing And Installing Airbag Triggering Unit
        • Subsequent Work
      • WM, 695355 Replacing Triggering Unit For Airbag
        • Replacing Triggering Unit For Airbag
      • WM, 695419 Removing And Installing Contact Unit
        • Component Information
      • WM, 695819 Removing And Installing Driver's Airbag Unit
        • Component Information
          • Installation position of driver's airbag unit
        • General Information
        • Preliminary Work
        • Remove Driver's Airbag Unit
        • Install Driver's Airbag Unit
        • Subsequent Work
      • WM, 695919 Removing And Installing Passenger's Airbag Unit
        • Technical Values
        • Component Information
          • Installation position of passenger's airbag unit
        • General Information
        • Preliminary Work
        • Removing And Installing Passenger's Airbag Unit
        • Subsequent Work
      • WM, 696119 Removing And Installing Front Pressure Sensor
        • Component Information
          • Installation position
        • General Information
        • Preliminary Work
        • Removing And Installing Front Pressure Sensor
        • Subsequent Work
      • WM, 696319 Removing And Installing Front Side Airbag
        • Technical Values
        • Component Information
          • Installation position of front side airbag
        • General Information
        • Preliminary Work
        • Removing And Installing Front Side Airbag
        • Subsequent Work
      • WM, 696619 Removing And Installing Head Airbag Unit
        • Technical Values
        • General Information
        • Preliminary Work
        • Remove Head Airbag
          • Removing head airbag
        • Install Head Airbag
          • Installing head airbag
        • Subsequent Work
      • WM, 696619 Removing And Installing Head Airbag (Only C02 And C36)
        • Technical Values
        • General Information
        • Preliminary Work
        • Removing Head Airbag (Only C02 And C36)
        • Installing Head Airbag (Only C02 And C36)
        • Subsequent Work
      • WM, 696819 Removing And Installing Occupant Detection Control Unit
        • Component Information
          • Installation position
        • General Information
        • Preliminary Work
        • Remove Occupant Detection Control Unit
          • Removing occupant detection control unit
        • Install Occupant Detection Control Unit
          • Installing occupant detection control unit
        • Subsequent Work
      • WM, 696855 Replacing Occupant Detection Control Unit
        • Information
        • Preliminary Work
        • Replacing Occupant Detection Control Unit
      • WM, 697019 Removing And Installing Pedestrian Protection
        • Technical Values
        • Preliminary Work
        • Removing And Installing Pedestrian Protection
        • Subsequent Work
      • WM, 697219 Removing And Installing Roll-Over Bar
        • Technical Values
        • General Information
        • Preliminary Work
        • Removing And Installing Roll-Over Bar
        • Subsequent Work
      • WM, 697255 Replacing Roll-Over Bar
        • Preliminary Work
        • Replacing Roll-Over Bar
        • Subsequent Work
      • WM, 697819 Removing And Installing Knee Airbag On Driver's Side
        • Technical Values
        • Component Information
          • Installation position of knee airbag on driver's side
        • General Information
        • Preliminary Work
        • Removing Knee Airbag On Driver's Side
        • Installing Knee Airbag On Driver's Side
        • Subsequent Work
      • WM, 697919 Removing And Installing Knee Airbag On Passenger's Side
        • Technical Values
        • Information
          • Component information
        • General Information
        • Preliminary Work
        • Removing Knee Airbag On Passenger's Side
        • Installing Knee Airbag On Passenger's Side
        • Subsequent Work
• Steering
  • Manual Steering
    • 48 Steering 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 480819 Removing And Installing Steering Lock
        • Technical Values
        • Preliminary Work
        • Removing And Installing Steering Lock
          • Removing Steering Lock
          • Installing Steering Lock
        • Subsequent Work
      • WM, 480855 Replacing ELV (Steering Lock) Control Unit
        • Tools
        • Technical Values
        • Replacing ELV Control Unit
      • WM, 481019 Removing And Installing Steering Wheel
        • Technical Values
        • Preliminary Work
        • Removing Steering Wheel
        • Installing Steering Wheel
        • Subsequent Work
      • WM, 481037 Disassembling And Assembling Steering Wheel
        • Technical Values
        • Preliminary Work
        • Disassembling And Assembling Steering Wheel
          • Disassembling Steering Wheel
          • Assembling Steering Wheel
        • Subsequent Work
      • WM, 481319 Removing And Installing Trim Panel On Steering-Column Switch
        • Component Information
          • Installation Position
          • Removing And Installing Trim Panel On Steering-Column Switch
      • WM, 481519 Removing And Installing Steering Column Centre
        • Tools
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Steering Column (Centre]
        • Installing Steering Column (Centre]
        • Subsequent Work
      • WM, 481555 Replacing Steering Column Centre
        • Technical Values
        • Preliminary Work
        • Replacing Steering Column Centre
        • Subsequent Work
      • WM, 4815IN Assessment Of Steering Column After Accident Damage
        • Information
          • Fundamentals
          • Assessment Of The Steering Column Of A Vehicle Involved In An Accident
      • WM, 482855 Replacing Bottom Joint
        • Technical Values
        • Preliminary Work
        • Replacing Bottom Joint
          • Removing Bottom Joint
          • Installing Bottom Joint
        • Subsequent Work
      • WM, 482919 Removing And Installing Height Adjustment Switch
        • Removing And Installing Height Adjustment Switch
      • WM, 483019 Removing And Installing Control Unit For Steering Column Adjustment
        • Technical Values
        • Preliminary Work
        • Removing And Installing Control Unit For Steering Column Adjustment
        • Subsequent Work
      • WM, 485319 Removing And Installing Bellows For Steering-Gear Housing
        • Tools
        • Information
        • Preliminary Work
        • Removing And Installing Bellows For Steering-Gear Housing
          • Removing Bellows For Steering-Gear Housing
          • Installing Bellows For Steering-Gear Housing
        • Subsequent Work
      • WM, 487919 Removing And Installing Tie Rod
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing And Installing Tie Rod
          • Removing Tie Rod
          • Installing Tie Rod
        • Subsequent Work
      • WM, 488119 Removing And Installing Tie-Rod Ball
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Tie-Rod Ball
          • Removing Tie-Rod Ball
          • Installing Tie-Rod Ball
        • Subsequent Work
      • WM, 489025 Power-Steering Gear: Teaching Steering Lock Settings
        • Tools
        • Power-Steering Gear: Teaching Steering Lock Settings
      • WM, 489055 Replacing Power-Steering Gear
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Power-Steering Gear
          • Removing Power-Steering Gear
          • Installing Power-Steering Gear
        • Subsequent Work
      • WM, 4890IN Assessment Of Steering Gear After Accident Damage
        • Information
          • Fundamentals
          • Assessment Of The Steering Of A Vehicle Involved In An Accident
          • Exceptional Regulation/Order Handling
  • Power Steering
    • 48 Steering 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 480819 Removing And Installing Steering Lock
        • Technical Values
        • Preliminary Work
        • Removing And Installing Steering Lock
          • Removing Steering Lock
          • Installing Steering Lock
        • Subsequent Work
      • WM, 480855 Replacing ELV (Steering Lock) Control Unit
        • Tools
        • Technical Values
        • Replacing ELV Control Unit
      • WM, 481019 Removing And Installing Steering Wheel
        • Technical Values
        • Preliminary Work
        • Removing Steering Wheel
        • Installing Steering Wheel
        • Subsequent Work
      • WM, 481037 Disassembling And Assembling Steering Wheel
        • Technical Values
        • Preliminary Work
        • Disassembling And Assembling Steering Wheel
          • Disassembling Steering Wheel
          • Assembling Steering Wheel
        • Subsequent Work
      • WM, 481319 Removing And Installing Trim Panel On Steering-Column Switch
        • Component Information
          • Installation Position
          • Removing And Installing Trim Panel On Steering-Column Switch
      • WM, 481519 Removing And Installing Steering Column Centre
        • Tools
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing Steering Column (Centre]
        • Installing Steering Column (Centre]
        • Subsequent Work
      • WM, 481555 Replacing Steering Column Centre
        • Technical Values
        • Preliminary Work
        • Replacing Steering Column Centre
        • Subsequent Work
      • WM, 4815IN Assessment Of Steering Column After Accident Damage
        • Information
          • Fundamentals
          • Assessment Of The Steering Column Of A Vehicle Involved In An Accident
      • WM, 482855 Replacing Bottom Joint
        • Technical Values
        • Preliminary Work
        • Replacing Bottom Joint
          • Removing Bottom Joint
          • Installing Bottom Joint
        • Subsequent Work
      • WM, 482919 Removing And Installing Height Adjustment Switch
        • Removing And Installing Height Adjustment Switch
      • WM, 483019 Removing And Installing Control Unit For Steering Column Adjustment
        • Technical Values
        • Preliminary Work
        • Removing And Installing Control Unit For Steering Column Adjustment
        • Subsequent Work
      • WM, 485319 Removing And Installing Bellows For Steering-Gear Housing
        • Tools
        • Information
        • Preliminary Work
        • Removing And Installing Bellows For Steering-Gear Housing
          • Removing Bellows For Steering-Gear Housing
          • Installing Bellows For Steering-Gear Housing
        • Subsequent Work
      • WM, 487919 Removing And Installing Tie Rod
        • Tools
        • Technical Values
        • Information
        • Preliminary Work
        • Removing And Installing Tie Rod
          • Removing Tie Rod
          • Installing Tie Rod
        • Subsequent Work
      • WM, 488119 Removing And Installing Tie-Rod Ball
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Tie-Rod Ball
          • Removing Tie-Rod Ball
          • Installing Tie-Rod Ball
        • Subsequent Work
      • WM, 489025 Power-Steering Gear: Teaching Steering Lock Settings
        • Tools
        • Power-Steering Gear: Teaching Steering Lock Settings
      • WM, 489055 Replacing Power-Steering Gear
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Power-Steering Gear
          • Removing Power-Steering Gear
          • Installing Power-Steering Gear
        • Subsequent Work
      • WM, 4890IN Assessment Of Steering Gear After Accident Damage
        • Information
          • Fundamentals
          • Assessment Of The Steering Of A Vehicle Involved In An Accident
          • Exceptional Regulation/Order Handling
• Suspension
  • Electronic Suspension
    • 43 Leveling System, Air Suspension, Damper Control 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 431619 Removing And Installing PASM Control Unit
        • Component Information
          • Installation Position Of PASM Control Unit
        • Preliminary Work
        • Removing And Installing PASM Control Unit
        • Subsequent Work
      • WM, 431655 Replacing PASM Control Unit
        • Preliminary Work
          • Notes
          • Replacing PASM Control Unit
      • WM, 433419 Removing And Installing Sensor For Body
        • Technical Values
        • Removing And Installing Sensor For Front Body
          • Removing Front Sensor For Body
          • Installing Front Sensor For Body
        • Removing And Installing Sensor For Rear Body
          • Removing Rear Sensor For Body (Boxster)
          • Removing Rear Sensor For Body (Cayman)
          • Installing Rear Sensor For Body
        • Subsequent Work
  • Suspension Control Systems
    • 45 Control System 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 450401 Checking PSM
        • Information
          • Bleeding The Hydraulic Unit
        • Tests
          • Hydraulic Swap Test
          • Checking Speed Sensor
      • WM, 451119 Removing And Installing Front Speed Sensor
        • Technical Values
        • Preliminary Work
        • Removing And Installing Front Speed Sensor
          • Removing Front Speed Sensor
          • Installing Front Speed Sensor
        • Subsequent Work
      • WM, 451519 Removing And Installing Rear Speed Sensor
        • Technical Values
        • Preliminary Work
        • Removing And Installing Speed Sensor
          • Removing Speed Sensor
          • Installing Rear Speed Sensor
        • Subsequent Work
      • WM, 453019 Removing And Installing Hydraulic Unit
        • Tools
        • Technical Values
        • Preliminary Work
        • Component Information
        • Removing Hydraulic Unit
        • Installing Hydraulic Unit
        • Subsequent Work
      • WM, 455919 Removing And Installing Rotation-Rate Sensor For PSM
        • Tools
        • Technical Values
        • Component Information
          • Installation Position
        • Preliminary Work
        • Removing And Installing Rotation-Rate Sensor For PSM
        • Subsequent Work
      • WM, 456005 Initializing And Calibrating PSM Steering-Angle Sensor
        • Tools
        • Initializing And Calibrating Steering-Angle Sensor
      • WM, 456019 Removing And Installing Steering-Angle Sensor
        • Information On Removing And Installing Steering-Angle Sensor
  • Wheel Alignment
    • 44 Wheels, Tyres, Suspension Alignment 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 440519 Removing And Installing Wheel
        • Technical Values
        • Information
        • Removing Wheel
        • Installing Wheel
        • Subsequent Work
      • WM, 440594 Balancing/Optimizing Wheels
        • Tools
          • Notes
          • Information
        • Explanation Of Terms
        • Balancing/Optimizing Wheels
          • Notes
          • Further To 1: Fitting The Tire On The Rim
          • Measuring Radial Force Variations
          • Further To 2B: Stationary Balancing With Rolling Smoothness Optimization
          • Further To 3: Fitting The Wheel On The Vehicle
          • Balancing Weights
          • Attaching Balance Stick-On Weights
      • WM, 4405IN WHEELS AND TIRES/Tire PRESSURE
        • INFORMATION ON WHEELS AND TIRES/Tire PRESSURE
          • Tire Pressure Of Cold Tires (20°C)
          • Overview Of Tires And Wheels (Standard)
      • WM, 441202 Checking Disc Wheels
        • Tools
        • Checking Disc Wheels
      • WM, 443219 Removing And Reinstalling Wheel Electronics
        • Technical Values
        • Information
          • General Information On Wheel Electronics
        • Preliminary Work
        • Removing And Reinstalling Wheel Electronics
          • Removing Wheel Electronics
          • Installing Wheel Electronics
        • Subsequent Work
      • WM, 443419 REMOVING AND INSTALLING CONTROL UNIT FOR Tire PRESSURE MONITORING (TPM)
        • Tools
        • Component Information
          • Installation Position Of RDK Control Unit
        • Preliminary Work
        • REMOVING AND INSTALLING CONTROL UNIT FOR Tire PRESSURE MONITORING (TPM)
        • Subsequent Work
      • WM, 443455 Replacing TPM Control Unit
        • Replacing TPM Control Unit
      • WM, 444019 Mounting Tires (Removing And Installing Tires)
        • Tools
        • Tools And Materials
          • Tools
          • Requirements/Information On Removing/Mounting Tires
          • Special Notes For Tire Pressure Monitoring (TPM)
        • Removing/Mounting Tires (Removing And Installing Tires)
          • Removing Tires
          • Mounting Tires
      • WM, 4440IN Information On Tires/Mounting Tires
        • Information
          • Tires
      • WM, 449503 Suspension Alignment, Complete
        • Tools
        • Technical Values
        • Information
          • General Procedure For Suspension Alignment
        • Height Check
          • Measuring Height Of Front And Rear Axle
        • Rear-Axle And Front-Axle Wheel Alignment
          • Preliminary Work
          • Adjusting Rear-Axle Camber
          • Adjusting Rear-Axle Toe
          • Adjusting Front-Axle Camber
          • Adjusting Front-Axle Toe
        • Subsequent Work
      • WM, 4495TW Setting Values For Suspension Alignment
        • Vehicle Height
        • Wheel Alignment Values
      • WM, 4495TW Conversion Table For Wheel Alignment Values
        • Minutes To Decimal Degrees
          • Notes
          • Conversion From Minutes To Decimal Degrees (Examples)
        • Conversion From Decimal Degrees To Minutes (Examples)
    • PORSCHE Wheel Alignment Specifications - 718 BOXSTER
      • Wheel Alignment Specifications
        • 718 BOXSTER [982] PASM - 10 mm (I-Nr. 475, GTS SERIES) 18" Wheels
        • 718 BOXSTER [982] PASM - 10 mm (I-Nr. 475, GTS SERIES) 19" Wheels
        • 718 BOXSTER [982] PASM - 10 mm (I-Nr. 475, GTS Series) 20" Wheels
        • 718 BOXSTER [982] PASM -20 mm (X73) 18" Wheels
        • 718 BOXSTER [982] PASM -20 mm (X73) 19" Wheels
        • 718 BOXSTER [982] PASM -20 mm (X73) 20" Wheels
        • 718 BOXSTER [982] PASM ± 0 mm (l-Nr. 477) 18" Wheels
        • 718 BOXSTER [982] PASM ± 0 mm (l-Nr. 477) 19" Wheels
        • 718 BOXSTER [982] PASM ± 0 mm (l-Nr. 477) 20" Wheels
        • 718 BOXSTER [982] S SERIES 18" Wheels
        • 718 BOXSTER [982] S SERIES 19" Wheels
        • 718 BOXSTER [982] S Series 20" Wheels
        • 718 BOXSTER GT4 [982] 20" Wheels
  • Wheels & Tire System
    • 44 Wheels, Tyres, Suspension Alignment 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 440519 Removing And Installing Wheel
        • Technical Values
        • Information
        • Removing Wheel
        • Installing Wheel
        • Subsequent Work
      • WM, 440594 Balancing/Optimizing Wheels
        • Tools
          • Notes
          • Information
        • Explanation Of Terms
        • Balancing/Optimizing Wheels
          • Notes
          • Further To 1: Fitting The Tire On The Rim
          • Measuring Radial Force Variations
          • Further To 2B: Stationary Balancing With Rolling Smoothness Optimization
          • Further To 3: Fitting The Wheel On The Vehicle
          • Balancing Weights
          • Attaching Balance Stick-On Weights
      • WM, 4405IN WHEELS AND TIRES/Tire PRESSURE
        • INFORMATION ON WHEELS AND TIRES/Tire PRESSURE
          • Tire Pressure Of Cold Tires (20°C)
          • Overview Of Tires And Wheels (Standard)
      • WM, 441202 Checking Disc Wheels
        • Tools
        • Checking Disc Wheels
      • WM, 443219 Removing And Reinstalling Wheel Electronics
        • Technical Values
        • Information
          • General Information On Wheel Electronics
        • Preliminary Work
        • Removing And Reinstalling Wheel Electronics
          • Removing Wheel Electronics
          • Installing Wheel Electronics
        • Subsequent Work
      • WM, 443419 REMOVING AND INSTALLING CONTROL UNIT FOR Tire PRESSURE MONITORING (TPM)
        • Tools
        • Component Information
          • Installation Position Of RDK Control Unit
        • Preliminary Work
        • REMOVING AND INSTALLING CONTROL UNIT FOR Tire PRESSURE MONITORING (TPM)
        • Subsequent Work
      • WM, 443455 Replacing TPM Control Unit
        • Replacing TPM Control Unit
      • WM, 444019 Mounting Tires (Removing And Installing Tires)
        • Tools
        • Tools And Materials
          • Tools
          • Requirements/Information On Removing/Mounting Tires
          • Special Notes For Tire Pressure Monitoring (TPM)
        • Removing/Mounting Tires (Removing And Installing Tires)
          • Removing Tires
          • Mounting Tires
      • WM, 4440IN Information On Tires/Mounting Tires
        • Information
          • Tires
      • WM, 449503 Suspension Alignment, Complete
        • Tools
        • Technical Values
        • Information
          • General Procedure For Suspension Alignment
        • Height Check
          • Measuring Height Of Front And Rear Axle
        • Rear-Axle And Front-Axle Wheel Alignment
          • Preliminary Work
          • Adjusting Rear-Axle Camber
          • Adjusting Rear-Axle Toe
          • Adjusting Front-Axle Camber
          • Adjusting Front-Axle Toe
        • Subsequent Work
      • WM, 4495TW Setting Values For Suspension Alignment
        • Vehicle Height
        • Wheel Alignment Values
      • WM, 4495TW Conversion Table For Wheel Alignment Values
        • Minutes To Decimal Degrees
          • Notes
          • Conversion From Minutes To Decimal Degrees (Examples)
        • Conversion From Decimal Degrees To Minutes (Examples)
• Transmission
  • Automatic Trans
    • 37 Automatic Transmission - Actuator, Housing 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 370235 - Checking And Topping Up ATF (Clutch Fluid)
        • Tools
        • Technical Values
        • Preliminary Work
        • Checking And Topping Up ATF (Clutch Fluid)
        • Subsequent Work
      • WM, 370255 - Changing ATF (Clutch Fluid)
        • Tools
        • Technical Values
        • Preliminary Work
        • Changing ATF (Clutch Fluid)
          • Draining ATF (Clutch Fluid)
          • Filling ATF (Clutch Fluid)
        • Subsequent Work
      • WM, 370419 - Removing And Installing Selector Knob
        • Removing And Installing Selector Knob
      • WM, 370819 - Removing And Installing Selector Support
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Selector Support
        • Subsequent Work
      • WM, 371319 - Removing And Installing Parking Lock Cable
        • Tools
        • Preliminary Work
        • Removing Parking Lock Cable
        • Installing Parking Lock Cable
        • Subsequent Work
      • WM, 373019 - Removing And Installing Transmission Control Unit (PDK)
        • Component Information
          • Installation Position Of Transmission Control Unit (PDK)
        • Preliminary Work
        • Removing And Installing Transmission Control Unit (PDK)
        • Subsequent Work
      • WM, 373055 - Replacing PDK Transmission Control Unit
        • Replacing PDK Transmission Control Unit
      • WM, 373355 - Replacing Sealing Ring For Parking Lock Shaft
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Sealing Ring For Parking Lock Shaft
          • Removing Sealing Ring For Parking Lock Shaft
          • Installing Sealing Ring For Parking Lock Shaft
      • WM, 373419 - Removing And Installing Double-Clutch Transmission
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Double Clutch Transmission
          • Removing Porsche Doppelkupplung (PDK)
        • Installing Double-Clutch Transmission
          • Installing Porsche Doppelkupplung (PDK)
        • Subsequent Work
      • WM, 373427 - Removing And Mounting Double Clutch Transmission
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Double Clutch Transmission
        • Mounting Double Clutch Transmission
        • Subsequent Work
      • WM, 373455 - Replacing PORSCHE DOPPELKUPPLUNG (PDK)
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing PORSCHE DOPPELKUPPLUNG (PDK)
          • Replacing Double Clutch Transmission
        • Subsequent Work
      • SY, 3734N0 - Eliminating Transmission Symptoms - Reworking PDK Transmission (Repair Measures In The Event Of Various Symptoms/SY0213)
        • General Information
          • Symptom
          • Remedial Action
        • Leaks On The PDK Transmission
          • Reworking PDK Transmission
          • Locating Leaks
        • Complaints Relating To Comfort On The PDK Transmission (Gearshift And Drive-Off Quality)
          • Reworking PDK Transmission
        • Complaints Relating To Noises On The PDK Transmission
          • Reworking PDK Transmission
        • Fault Memory Entries In The PDK Transmission Control Unit
          • Reworking PDK Transmission
          • FES5/SA4 In The Event Of Fault Memory Entries
          • Invoicing
      • WM, 374019 - Removing And Installing Transmission Mount
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Transmission Mount
        • Installing Transmission Mount
        • Subsequent Work
      • WM, 374055 - Replacing Transmission Mount
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Transmission Mount
        • Subsequent Work
      • WM, 375519 - Removing And Installing ATF Pan
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing ATF Pan
        • Installing ATF Pan
        • Subsequent Work
      • WM, 375855 - Changing ATF Filter
        • Changing ATF Filter
      • WM, 377219 - Removing And Installing Oil Cooler
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Oil Cooler
        • Installing Oil Cooler
        • Subsequent Work
      • WM, 377419 - Removing And Installing Transmission Temperature Sensor
        • Tools
        • Technical Values
        • Removing Transmission Temperature Sensor
        • Installing Transmission Temperature Sensor
        • Subsequent Work
    • 38 Automatic Transmission Gears Control 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 381841 - Repairing Wire Harness In Transmission
        • Tools
        • Preliminary Work
        • Repairing Wire Harness In Transmission
          • Replacing Electric Plug Connections For Transmission Wiring Harness
        • Subsequent Work
      • WM, 386019 - Removing And Installing ATF Cooler
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing ATF Cooler
        • Installing ATF Cooler
        • Subsequent Work
      • WM, 386219 - Removing And Installing Line For ATF Cooling
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Line For ATF Cooling
        • Installing Line For ATF Cooling
        • Subsequent Work
      • WM, 386319 - Removing And Installing Port Plate For ATF Cooler
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Port Plate For ATF Cooler
        • Installing Port Plate For ATF Cooler
        • Subsequent Work
      • WM, 386955 - Replacing Radial Shaft Seal On PORSCHE DOPPELKUPPLUNG (PDK)
        • Tools
        • Preliminary Work
        • Removing Radial Shaft Seal On PORSCHE DOPPELKUPPLUNG (PDK)
        • Installing Radial Shaft Seal On PORSCHE DOPPELKUPPLUNG (PDK)
        • Subsequent Work
      • WM, 387719 - Removing And Installing Hydraulic Control Unit
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Hydraulic Control Unit
        • Installing Hydraulic Control Unit
        • Subsequent Work
    • 3X Power Transmission - General 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 3X00 - 3D PDF Engine Transmission
      • WM, 3X00IN - Technical Values
        • Tools
        • Technical Values
        • Transmission Ratios
        • Technical Values - Group 30
          • Clutch, Actuation
        • Technical Values - Group 34
          • Manual Transmission - Actuator, Housing
        • Technical Values - Group 37
          • Automatic Transmission - Actuator, Housing
        • Technical Values - Group 38
          • Automatic Transmission - Wheels, Control
        • Technical Values - Group 39
          • Final Drive - Differential Gear, Differential Lock
  • 30 Clutch, Actuation 2.0L -- 982 - BOXSTER/CAYMAN
    • WM, 300107 - Bleeding The Clutch System
      • Technical Values
      • Bleeding The Clutch System
        • General Information On The Work Procedure
        • Filling/Bleeding The Clutch System
    • WM, 300519 - Removing And Installing Clutch Pedal
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing And Installing Clutch Pedal
        • Removing Clutch Pedal
        • Installing Clutch Pedal
      • Subsequent Work
    • WM, 302019 - Removing And Installing Clutch Master Cylinder
      • Tools
      • Installation Position
      • Preliminary Work
      • Removing Clutch Master Cylinder
      • Installing Clutch Master Cylinder
      • Subsequent Work
    • WM, 303019 - Removing And Installing Clutch Slave Cylinder
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Clutch Slave Cylinder
      • Installing Clutch Slave Cylinder
      • Subsequent Work
    • WM, 304519 - Removing And Installing Release Bearing
      • Technical Values
      • Preliminary Work
      • Removing Release Bearing
      • Installing Release Bearing
      • Subsequent Work
    • WM, 304719 - Removing And Installing Guide Sleeve
      • Technical Values
      • Preliminary Work
      • Removing Guide Sleeve
      • Installing Guide Sleeve
      • Subsequent Work
    • WM, 305019 - Removing And Installing Clutch
      • Tools
      • Technical Values
      • Preliminary Work
      • Removing Clutch
      • Installing Clutch
      • Subsequent Work
  • Manual Trans
    • 34 Mechanical Transmission Actuator Housing 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 340135 - Checking And Topping Up Transmission Oil
        • Tools
        • Technical Values
        • Checking And Topping Up Transmission Oil
          • Preliminary Work
        • Checking Transmission Oil
        • Subsequent Work
      • WM, 340155 - Changing Transmission Oil
        • Tools
        • Technical Values
        • Preliminary Work
        • Draining Transmission Oil
        • Topping Up Transmission Oil
        • Subsequent Work
      • WM, 340419 - Removing And Installing Shift-Lever Knob
        • Removing And Installing Shift-Lever Knob
      • WM, 340619 - Removing And Installing Shift Lever Bellows
        • Removing And Installing Shift Lever Bellows
      • WM, 340819 - Removing And Installing Shift Console
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing And Installing Shift Console
          • Removing And Installing Gearshift Bracket
        • Subsequent Work
      • WM, 341215 - Adjusting The Shift And Selector Cables
        • Tools
        • Preliminary Work
        • Adjusting The Shift And Selector Cables
        • Subsequent Work
      • WM, 341219 - Removing And Installing Shift And Selector Cables
        • Tools
        • Preliminary Work
        • Removing Shift And Selector Cables
        • Installing Shift And Selector Cables
        • Subsequent Work
      • WM, 343019 - Removing And Installing Neutral Position Sensor, Mt
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Neutral Position Sensor, Mt
        • Installing Neutral Position Sensor, Mt
        • Subsequent Work
      • WM, 343419 - Removing And Installing Inductive Speed Sensor
        • Tools
        • Technical Values
        • Removing Inductive Speed Sensor
        • Installing Inductive Speed Sensor
      • WM, 343519 - Removing And Installing Transmission
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Transmission
        • Installing Transmission
        • Subsequent Work
      • WM, 343527 - Removing And Mounting Transmission
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Transmission
        • Mounting Transmission
        • Subsequent Work
      • WM, 344019 - Removing And Installing Transmission Mount
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Transmission Mount
        • Installing Transmission Mount
        • Subsequent Work
      • WM, 344055 - Replacing Transmission Mount
        • Tools
        • Technical Values
        • Preliminary Work
        • Replacing Transmission Mount
        • Subsequent Work
      • WM, 347219 - Removing And Installing Transmission-Oil Pump
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Transmission-Oil Pump
        • Installing Transmission-Oil Pump
        • Subsequent Work
      • WM, 347419 - Removing And Installing Transmission Oil Cooler
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Transmission Oil Cooler
        • Installing Transmission Oil Cooler
        • Subsequent Work
      • WM, 347819 - Removing And Installing Temperature Sensor
        • Tools
        • Technical Values
        • Preliminary Work
        • Removing Temperature Sensor
        • Installing Temperature Sensor
        • Subsequent Work
    • 35 Manual Transmission Gears Shafts Internal Actuator 2.0L -- 982 - BOXSTER/CAYMAN
      • WM, 355055 - Replacing Sealing Ring For Drive Shaft
        • Tools
        • Preliminary Work
        • Replacing Sealing Ring For Drive Shaft
          • Removing Sealing Ring For Drive Shaft
          • Installing Sealing Ring For Drive Shaft
        • Subsequent Work
• External Pages