5X - Body General

WM, 5X00IN01 Safety Instructions
- Safety Instructions For Raising Vehicles
  - Danger of injury when raising vehicles
  - Damage when raising vehicles
- General Warning Notes
- Safety Instructions For Adhesive Bonding
  - Danger of poisoning and injury when using adhesive
  - Safety instructions for Teromix-6700 two-component adhesive
- Safety Instructions For Assembly Work
  - Safety instructions for sharp-edged body and unit parts
  - Safety instructions for airbag system
- Safety Instructions For Corrosion Protection
  - Safety instructions for stopper location plan (body)
WM, 5X00IN02 Protection For Electric Components During Body Repairs
- Information On Electronic Control Units
WM, 5X00IN03 Corrosion Protection Measures During Repair Work
- Measures For Maintaining Long-Term Body Protection
- Prerequisite For Ensuring Validity Of The Long-Life Guarantee
  - Prerequisite for maintaining the long-life guarantee
    - Porsche long-life guarantee conditions
WM, 5X00IN04 Body Parts Of Various Sheet-Steel Strengths
- List Of Materials
- High-Strength Steel
- Very-High-Strength Steel
- Ultra-High-Strength Steel
- Separation Points
- Welding Work
WM, 5X00IN07 General Information And Notes On Quality
- Notes
- Battery Trickle Charge
  - Battery trickle charging
- Information On Control Units
- Information On Maintaining Long-Life Corrosion Protection Or The Long-Life Guarantee
  - Information on maintaining long-life corrosion protection
  - Information on maintaining the long-life guarantee
WM, 5X00IN08 Bonding Log
WM, 5X00IN10 Welding Aluminium
- Notes
- Welding Aluminium
WM, 5X00IN11 Stud Welding
- Notes
- Preparing For Stud Welding
- Welding Parameters
- Welding Studs
WM, 5X00IN20 Working With Body Structural Foam
- Notes
- General Information
- Structural Foam In Body Building
- Working With Body Structural Foam
WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00
- Notes
- General Information
- Information On Structural Bonding In Vehicle Manufacturing
- Working With Body Structural Adhesive Pah.071.781.00
WM, 5X00IN22 Working With Body Foam Filler
- Notes
- General Information
- Foam Filler In Body Building
- Working With Body Foam Filler
WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints
- Notes
- General Information
- Loosening Joint
- Making Joint
  - Setting blind rivets
  - Setting flow-form rivets
WM, 5X00IN24 Setting Self-Tapping Screws
- Notes
- General Information
- Setting Self-Tapping Screws
WM, 5X00IN25 Making Ground Connections
- Notes
- Making Ground Connection Using A Through Bolt
- Making Ground Connection Using A Rivet Nut
WM, 5X00IN26 Replacing Coarse Threaded Bolts
- Notes
- Replacing Coarse Threaded Bolts
- Subsequent Work
WM, 5X00IN33 Thread Repairs For Threaded Bushes With Collar
- Thread Repairs For Threaded Bushes With Collar
WM, 5X00IN34 Thread Repairs For Threaded Bushes Without Collar
- Notes
- Repair Procedure For Threaded Bush Without Collar
WM, 5X00IN61 Work Sequence For Accident Repairs
- Work Sequence For Accident Repairs
WM, 5X00IN62 Procedure For Damage Diagnosis
- Notes
- Procedure For Damage Diagnosis
- Identifiable Deformations On The Body Structure
- No Identifiable Deformations On The Body Structure
WM, 5X00IN83 Connecting Elements For Body Repairs
- Notes
- Connecting Elements For Body Repairs
WM, 5X00IN Technical Values
- Notes
- Technical Values
WM, 5X00IN Cavity Preservation
- Add-On Parts
- Unpainted BODYSHELL
  - Notes
  - Bottom Of Front Of Vehicle
WM, 5X00IN Data Plates
- Diagram: Data Plates
  - Front and right side of vehicle
WM, 5X00IN Underbody Protection
- Notes
- Tools And Materials
  - Tools
- Diagram: Underbody Protection
  - Overview diagram - lower side member and floor
  - Overview diagram - lower rear end
WM, 5X00IN Information On Aluminium Repairs
- Notes
- List Of Materials
- Damage Diagnosis
  - Repairs
    - Removing dents on accessories
- Occupational Safety
  - Corrosion protection measures
WM, 5X00IN Gap Dimension
- Notes
- Lighting
  - Gap dimensions of main headlights
- Windows
  - Front
    - Gap dimensions of front wing
- Gap Dimensions - Side
  - Gap dimensions of front door
- Front
  - Rear
    - Gap dimensions of rear lid
  - Gap dimensions of rear spoiler
WM, 5X00IN Exterior Colours
- Exterior Colours - Solid Paint System
- Exterior Colours - Metallic Paint System
WM, 5X00IN Vehicle Identification Number
- Notes
- Re-Imprinting New Vehicle Identification Number
  - Information
  - Spacer for replacing the vehicle identification number
- Encoding The Vehicle Ident. No
WM, 5X00IN Diagram: Stopper Plan
- Diagram: Stopper Plan
WM, 5X00IN Seam Seal
- Notes
- Add-On Parts
  - Instructions for sealing seams
  - Door
- Rear Lid
- Unpainted BODYSHELL
WM, 5X00IN Body Parts Of Various Sheet-Steel Strengths
- List Of Materials
- High-Strength Steel
- Very-High-Strength Steel
- Ultra-High-Strength Steel
- Separation Points
- Welding Work