Removal & Installation

Includes: R&I Engine Assembly (where necessary).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Automatic DCT Trans, w/Dynamic Chassis Control		8.3		C
Automatic DCT Trans, w/o Dynamic Chassis Control		7.5		C
Combination Procedure: CONVERTER: Drain & Test:
		0.2		C
Combination Procedure: CONVERTER SEAL: Remove & Replace:
		0.2		B
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Replace:
Rear		0.8		B
Combination Procedure: FLYWHEEL: Remove & Replace:
		1.5		C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
		0.1		C
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
	Includes: Programming.	1.1		C