Removal & Installation
WARNING: This page is about the 911 Carrera, 2D Convertible, which is a different variant/trim than selected.
Includes: R&I Engine Assembly (where necessary).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Automatic DCT Trans, w/Dynamic Chassis Control | 8.3 | C | ||
| Automatic DCT Trans, w/o Dynamic Chassis Control | 7.5 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CONVERTER SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Replace: | ||||
| Rear | 0.8 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 1.5 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Includes: Programming. | 1.1 | C | ||