Grind Complete

Includes: Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats and clean Valve Guides. Adjust Valves (where applicable).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
w/Fuel Injection		8.5		A
w/o Fuel Injection		7.3		A
Combination Procedure: CYLINDER HEAD STUD: Install:
Oversize,Each		0.2		B
Combination Procedure: ROCKER ARM &/OR SHAFT: Disassemble & Assemble:
		0.5		B
Combination Procedure: VALVE GUIDE: Remove & Replace:
Each Additional		0.2		A
One		0.3		A