LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1978 >> 99 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Deceleration Valve >> Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Deceleration Valve: Testing

NOTE: To avoid faulty reading caused by radiator fan cutting in while performing test, disconnect thermal switch wires while test is being performed.
  1. With engine at normal operating temperature, disconnect hose between carburetor and deceleration valve and check for vacuum passing through valve. If vacuum is present, the adjusting screw on the deceleration valve has to be screwed in further until the valve is closed. Reconnect hose between carburetor and deceleration valve.
  2. Connect a tachometer and adjust idle speed to 900 RPM. Open throttle to obtain 3000 RPM. Release throttle and measure time required for engine speed to drop from 3000 RPM to idle. If deceleration valve is correctly adjusted, time should be between 7-8 seconds. If not, valve must be adjusted.
scientia non olet · About LEMON Manuals