LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1994 >> 900 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> Electronic Control Module (ECM) (9000 Series) >> Ground Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ground Circuit

  1. Turn ignition off. Locate ECM in engine compartment, between front and rear firewall partitions, on left side. Connect negative lead of ohmmeter to ground. Backprobe ECM terminalsNo. 24 (Black/White wire), No. 25 (Black/White wire), No. 46 (Black wire), and No. 47 (Black wire). Resistance should be zero ohms for each wire. If not, repair open to ground.
  2. Connect negative lead of DVOM to a good ground. Backprobe each terminal specified in step 1). With vehicle running, DVOM should indicate less than one volt. If voltage is not as specified, inspect for open, corrosion, or loose connection on appropriate ground lead.
scientia non olet · About LEMON Manuals