General Data
LUBRICATING SYSTEM GENERAL DATA
| Oil volume, incl. filter | without oil cooler | litres | 5.0 |
| with oil cooler | litres | 5.4 | |
| when servicing | litres | 4.0 | |
| Difference in volume, max-min | litres | 1.0 | |
| Grade of oil | Saab Turbo engine oil or engine oil complying with API SH/SJ and ACEA A3/B3 | ||
| Viscosity | SAE 10W-30 or 10W-40. At constant temperatures of -20°C (-4°F) or below, use 5W-30 or 5W-40. These must be fully synthetic or synthetic based oils. At constant temperatures of +15 °C (+59°F) or above, use 15W-50 or 20W-50. 5W-grade oils must be fully synthetic or synthetic based if used. 5W mineral oil can be used on markets where only this type is available provided they comply with the quality requirements specified above. |
IMPORTANT:
The recommended grades of oil contain all necessary additives and the use of additional additives should therefore be avoided.