Main task: Notes

The main tasks of the DDM are:

• Read the status of the window lift buttons.
• Control and supply power for the driver's door window lift (with optional pinch protection function)
• Send the status for other window lift buttons on the bus.
• Read the bootlid button status and send the value on the bus.
• Read the status of the door mirror buttons.
• Control and supply power for the driver door mirror motors (optional memory function and electrically-operated retraction) and control the corresponding function for the front passenger door via the bus.
• Supply power to driver's door mirror heating.
• Read the central lock button status and send the value on the bus.
• Supply power to central locking system in driver's door with or without TSL, read the central locking system and TSL status and send the value on the bus.
• The control module also reads the door switch status with an individual lead but does not use the value. The connection is intended for future development.
• Supply power to door button lighting.
• Supply power to the courtesy lighting lamp mounted in the lower edge of the door.