LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2004 >> 9-3 Linear, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Control Module >> Adjustment - Replacement >> Tire Pressure Monitoring Module (753) >> To fit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

To fit

  1. Fit the receiver to the holder.
    Fig 1: Illustration For Step 1
    G03719274Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the holder with receiver.
    Fig 2: Illustration For Steps 2-3
    G03719275Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION  .
  3. Plug in the connector.
    NOTE: Make sure that the switch locks properly.
  4. Fit the cover to the center console.
    Fig 3: Illustration For Step 4
    G03719276Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. When fitting a new control module:  Carry out procedures after fitting a control module. See PROCEDURE AFTER CHANGING CONTROL MODULE  .
scientia non olet · About LEMON Manuals