Engine mountings: Background

The power unit is suspended from two points; one on the left-hand side at the top of the gearbox and the body, and the other on the top right of the engine and the body.

The left-hand one is rubber, while the right-hand one is a combined rubber/hydraulic design. Using a hydraulic mounting on the right-hand side reduces the vibration that arises in the drive unit due to poor road surfaces. The vibration inherent in the engine is absorbed by the rubber part of the mounting, while the hydraulic part is active when the amplitude (vibration) in the drive unit is greater. Two torque arms complete the engine suspension. These arms, one fastened to the oil pan and helper frame, and the other to the mating surface between the engine and gearbox and the helper frame, absorb the torque that is exerted on the drive unit during acceleration and retardation.