LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2004 >> 9-3 Linear, Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> Control Module >> Adjustment - Replacement >> Control module, door >> To fit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

To fit

  1. Fit the door module pressing it obliquely upward so that the clip engages.
    Fig 1: Illustration For Steps 1-2
    G03719242Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. When changing the driver door module:  Fit the door trim screw.
  3. When changing the driver door module:  Affix the cell block with double-sided tape. The use of 16-30 20 807 is recommended.
  4. Make sure the door trim clips are in place and intact. Replace the clips if necessary.
  5. Fit the door trim.
  6. Cars with pinch protection:  Perform Programming of the pinch protection. See ELECTRIC MOTOR FOR SUNROOF (WITH PINCH PROTECTION)  .
  7. If the control module has been changed  , perform Measures after changing the control module. See PROCEDURE AFTER CHANGING CONTROL MODULE  .
scientia non olet · About LEMON Manuals