To remove

Remove the pedal bracket cover by undoing the 3 screws and the clip. Tilt the cover and carefully pull it out. Pay attention to the cables for the diagnostic tool data link connector and the lighting.

Fig 1: Illustration For Step 1
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Depress the clutch pedal.
Extract the red sleeve on the switch until it clicks.

Fig 2: Illustration For Steps 3 And 5
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Detach the switch by pressing in the catches with an electricians screwdriver or similar tool.
Unplug the connector once the switch is loose.