Switch positions

NOTE: For safety reasons (brake system functions), the brakes must be applied once while the engine is running before the system can be activated.

The following message is shown on SID: Tap brakes lightly before using cruise control

The system has the following functions:

ON : Engage
OFF : Disengage
SET/+ : Set speed and increase set speed
SET/- : Set speed and reduce set speed
RESUME : Resume set speed

The CRUISE indicator in the main instrument unit comes on when the slide control has been moved to ON. If the engine is turned off with the system in position ON, it will also be ON the next time the engine is started.