LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Arc >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 5.3L - Introduction >> Repair Instructions >> Throttle Actuator Control (TAC) Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    NOTE: Refer to Handling ESD Sensitive Parts Notice in Cautions and Notices.
    Fig 1: View Of I/P Harness Electrical Connector
    GM899718Courtesy of GENERAL MOTORS CORP.
  1. Remove the bulk connector from the bracket, insert a small flat-bladed tool to disengage the clip.
  2. Disconnect the instrument panel (I/P) harness electrical connector.
    3. Fig 2: View Of Engine Harness Electrical Connector
    GM899719Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the engine harness electrical connector.
    4. Fig 3: View Of TAC Module
    GM899720Courtesy of GENERAL MOTORS CORP.
  4. Release the retaining tab on the side of the throttle actuator control (TAC) module (3).
  5. Remove the TAC module (3) from the retaining bracket (1).
  6. If necessary, remove the TAC module bracket nuts (2) and bracket (1).
scientia non olet · About LEMON Manuals