LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the radiator support diagonal brace if applicable. Refer to Brace Replacement - Radiator Support Diagonal in Body Front End.
    2. Fig 1: View Of Secondary Air Injection Reaction Pump Inlet Hose At Air Cleaner Air Outlet Duct
    GM1297836Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the secondary air injection (AIR) reaction pump inlet hose from the air cleaner air outlet duct.
    3. Fig 2: Locating Air Cleaner Components
    GM1361132Courtesy of GENERAL MOTORS CORP.
  3. Loosen the 3 air cleaner housing retaining screws (1).
  4. Remove the air cleaner housing (2).
  5. Lift the air cleaner element (6) and air outlet duct (3) from the lower air cleaner housing/washer solvent tank assembly (4).
  6. Remove the air cleaner element (6) from the air outlet duct (3) with a twisting and pulling motion.
  7. Inspect the entire assembly for dust, debris, or water. Clean or replace as necessary.
scientia non olet · About LEMON Manuals