LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Locating Camshaft Position Sensor Electrical Connector
    GM487648Courtesy of GENERAL MOTORS CORP.
  1. Remove the camshaft position (CMP) sensor electrical connector (1).
  2. Remove the CMP sensor retaining bolt.
scientia non olet · About LEMON Manuals