LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Fuel Sender Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Fuel Sender Assembly
    GM734516Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. NOTE: Do Not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage the joints.
  2. Use the J 44402  to remove the fuel sender assembly retaining ring. See Special Tools .
  3. Remove the fuel sender assembly and the seal. Discard the seal.
    CAUTION: Drain the fuel from the fuel sender assembly into an approved container in order to reduce the risk of fire and personal injury. Never store the fuel in an open container.
  4. Clean the fuel sender sealing surfaces.
scientia non olet · About LEMON Manuals