LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Heated Oxygen Sensor Replacement - Position 1 >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

NOTE: Refer to Heated Oxygen Sensor (HO2S) Resistance Learn Reset Notice in Cautions and Notices.
NOTE: Refer to Heated Oxygen and Oxygen Sensor Notice in Cautions and Notices.
    Fig 1: Locating Heated Oxygen Sensor Components
    GM730852Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the heated oxygen sensor (HO2S) electrical connector (1).
    2. NOTE: Refer to Excessive Force and Oxygen Sensor Notice in Cautions and Notices.
  2. Remove the HO2S (2) using a J 39194-B  . See Special Tools .
scientia non olet · About LEMON Manuals