LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Secondary Air Injection (AIR) Pipe Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: View Of Secondary AIR Pipes & Pump
    GM1297763Courtesy of GENERAL MOTORS CORP.
  2. Disconnect both the air inlet and air outlet pipe from the secondary air injection reaction (AIR) pump.
  3. Lower the vehicle.
    4. Fig 2: Locating Bolt & Fir-Tree Fasteners Securing AIR Pipe To Cylinder Head
    GM1297756Courtesy of GENERAL MOTORS CORP.
  4. Remove the cylinder head. Refer to Cylinder Head Replacement in Engine Mechanical - 4.2L.
  5. Remove the bolt and fir-tree fasteners securing the AIR pipe to the cylinder head.
scientia non olet · About LEMON Manuals