System Specifications

FRONT BRAKE ROTOR/DISC

Rotor Discard Thickness * 27.5 mm (1.08 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Lateral Runout 0.051 mm (0.002 in)

REAR BRAKE ROTOR/DISC

Rotor Discard Thickness * 18.60 mm (0.728 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Lateral Runout 0.051 mm (0.002 in)

* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.