Trionic 8, Mode 06
NOTE:
For vehicles produced prior to December 2004, the handling of MIDs 01, A2, A3, A4 and A5 is incorrect and function as follows.
MID01, TID07 & 08: The test and limit values are fixed and do not reset at code clear, nor do they ever change values.
MID A2, A3, A4, A5: Min and max limits do not reset to 0 at code clear.
MID01, TID07 & 08: The test and limit values are fixed and do not reset at code clear, nor do they ever change values.
MID A2, A3, A4, A5: Min and max limits do not reset to 0 at code clear.
TRIONIC 8, MODE CHART
| MID | TIME | Unit/scale | Fault Code supported | Data | Range (For information only) | Resolution (For information only) |
|---|---|---|---|---|---|---|
| O2 sensor, B1S1 | ||||||
| $01 | $01 | 0B | Rich to lean threshold voltage | 0 to 65.535 V | 0.001 V/bit | |
| $02 | 0B | Lean to rich threshold voltage | 0 to 65.535 V | 0.001 V/bit | ||
| $07 | 0B | Minimum sensor voltage | 0 to 65.535 V | 0.001 V/bit | ||
| $08 | 0B | Maximum sensor voltage | 0 to 65.535 V | 0.001 V/bit | ||
| $80 | 24 | P0133 | Response test, combustion counts | 0 to 65535 (raw data) | 1/bit | |
| $81 | 24 | P0133 | Response test, switch counts | 0 to 65535 (raw data) | 1/bit | |
| $82 | 24 | P1132 | Switch point diagnostic, rich limit | 0 to 65535 (raw data) | 1/bit | |
| $83 | 24 | P1131 | Switch point diagnostic, lean limit | 0 to 65535 (raw data) | 1/bit | |
| O2 sensor, B1S2 | ||||||
| $02 | $07 | 0B | Minimum sensor voltage | 0 to 65.535 V | 0.001 V/bit | |
| $07 | 0B | Maximum sensor voltage | 0 to 65.535 V | 0.001 V/bit | ||
| Catalyst monitor | ||||||
| $21 | $80 | 10 | P0420 | Catalyst monitor, evaluated value | 0 to 65535 ms | 1 ms/bit |
| EVAP monitor, large leak | ||||||
| $3A | $81 | 01 | P0455 | EVAP monitor leak factor. | 0 to 65535 counts | 1 count/bit |
| EVAP monitor, 0.040" | ||||||
| $3B | $82 | 01 | P0442 | EVAP monitor leak factor. | 0 to 65535 counts | 1 count/bit |
| EVAP monitor, 0.020" | ||||||
| $3C | $83 | 01 | P0456 | EVAP monitor leak factor. | 0 to 65535 counts | 1 count/bit |
| The same value is reported in MID:s 3A, 3B, and 3C. When a large leak is present, all CID:s will show "Fail". | ||||||
| AIR monitor | ||||||
| $71 | $81 | 01 | Main AIR test, evaluated value | 0 to 65535 counts | 1 count/bit | |
| Misfire Monitor | ||||||
| $A2 | $0B | 24 | P0300/P0301 | EWMA misfire counts, cylinder 1 | ||
| $0C | 24 | P0300/P0301 | DCY misfire counts, cylinder 1 | |||
| $A3 | $0B | 24 | P0300/P0302 | EWMA misfire counts, cylinder 2 | ||
| $0C | 24 | P0300/P0302 | DCY misfire counts, cylinder 2 | |||
| $A4 | $0B | 24 | P0300/P0303 | EWMA misfire counts, cylinder 3 | ||
| $0C | 24 | P0300/P0303 | DCY misfire counts, cylinder 3 | |||
| $A5 | $0B | 24 | P0300/P0304 | EWMA misfire counts, cylinder 4 | ||
| $0C | 24 | P0300/P0304 | DCY misfire counts, cylinder 4 | |||