LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1992 >> SC Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Miscellaneous Controls >> Transmission (C-8) >> Converter Clutch Actuator
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Converter Clutch Actuator

  1. Disconnect transaxle harness connector. Measure resistance across actuator terminals "E" and "K". Resistance should be 3-4 ohms. See Figure . If resistance is not as specified, go to next step.
  2. Remove actuator connector plate. Check resistance across actuator terminals. Resistance should be 3-4 ohms. If resistance is not as specified, replace actuator. If resistance was okay, replace actuator connector plate.
NOTE: Some solenoids have an internal pressure switch in series with the solenoid winding and will not show continuity until that pressure switch is applied by transmission hydraulic pressure. See Figure .
scientia non olet · About LEMON Manuals