Steering Wheel: Removal
- Set front wheels in straight-ahead position. Turn ignition switch to LOCK position. Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS .
- Remove air bag module. See AIR BAG (INFLATOR) MODULE . Disconnect horn switch connector and cruise control switch connector (if equipped).
- Remove steering wheel nut. Using Steering Wheel Puller (J-1859-03), remove steering wheel. DO NOT install puller bolts too deeply into center hub, as SIR coil assembly will be damaged. See Figure.
- After steering wheel is removed, prevent coil assembly from rotating by inserting Yellow tab (if available) into coil assembly, or tape coil assembly in place.