LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1994 >> SW2 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Engine Controls - System/Component Tests >> A/C Pressure Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Pressure Switch

  1. Connect A/C pressure gauges to system and start engine. Note high and low pressure readings. If pressures are normal, go to next step. If pressures are less than normal, check system for leaks. Evacuate and recharge as necessary. If pressures are high, check for system overcharge, overheating or mechanical failure in refrigerant delivery system.
  2. Disconnect high and low pressure switches. Install jumper across each switch harness connector to allow A/C system to function normally. Using an ohmmeter, check continuity between pressure switch terminals.
  3. Continuity should be present on both high and low switches (if equipped). If continuity is not present, replace A/C pressure switch. For wiring schematics, see mini-schematics under A/C CLUTCH(C-10) & ELECTRIC COOLING FAN (C-12) under MISCELLANEOUS CONTROLS  .
scientia non olet · About LEMON Manuals