LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1995 >> SW2 Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pressure Relief
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Relief

WARNING: Always relieve fuel pressure before disconnecting any fuel injection-related component. DO NOT  allow fuel to contact engine or electrical components.
  1. Fuel system is under pressure. Relieve pressure before servicing fuel system. Fuel pressure may be relieved using one of 2 different methods.
  2. One method is to disconnect fuel pump connector. Start engine and allow to run until it stops. Operate starter for 3 seconds to remove remaining fuel from fuel lines. Reconnect fuel pump once repair is complete.
  3. The other method is to install Fuel Pressure Gauge (SA9127E) on fuel pressure test port. When installing fuel pressure gauge, wrap shop towel around pressure connection to absorb fuel leakage. Place gauge bleed hose in container. Open bleed valve to bleed fuel pressure.
scientia non olet · About LEMON Manuals