LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1996 >> SW2 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> A/C On (A/C Request) Switch Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C On (A/C Request) Switch Test

  1. Start engine and allow to idle. If a scan tool is available, scan A/C request parameter.Move A/C mode selector back and forth between ON and OFF positions. Scan status should change.
  2. If scan tool is not available or scan status does not change, measure voltage between ground and PCM A/C request terminal. For wiring schematics, see appropriate WIRING DIAGRAMS article.
  3. With A/C mode selector in the ON position, battery voltage should be present. If battery voltage is not present, check for open between A/C mode select switch and PCM A/C request terminal, low A/C refrigerant level causing low pressure switch to open, bad A/C fuse or bad A/C mode select switch.
scientia non olet · About LEMON Manuals