LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1997 >> SC2 Automatic, MP7 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Basic Fuel System Checks >> Fuel System Pressure Test >> Fuel Pressure Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Check

  1. Remove air induction tube. Relieve fuel pressure. See FUEL PRESSURE RELIEF. Install fuel pressure gauge and bleed off any fuel in system into a container. Close fuel pressure gauge shut-off valve.
  2. Turn ignition on with engine off. Record maximum fuel pressure. Cycle ignition on and off several times to establish an accurate reading. Allow pressure to stabilize for about 30 seconds. Fuel pressure reading should be 38-44 psi (2.7-3.1 kg/cm2 ).
  3. Bleed fuel pressure and repeat test for at least 2 more times. If during test fuel pressure drops 6-8 psi (.42-.56 kg/cm2 ), install Fuel Rail Return Plug (SA9410E).
  4. Turn ignition on with engine off. Record maximum fuel pressure. Cycle ignition on and off several times. Allow pressure to stabilize for about 30 seconds. If fuel pressure remains stable, replace fuel pressure regulator. If fuel pressure bleeds off 6-8 psi (.42-.56 kg/cm2 ), check fuel inlet line for leaks, check for leaking injector or check for faulty fuel pump.
FUEL PRESSURE

Application psi (kg/cm2 )
1.9L 38-44 (2.7-3.1)
scientia non olet · About LEMON Manuals