LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1998 >> SC1 Automatic >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> Computer Relearn Procedures >> "Y" Body >> Password Learn Procedure For Anti-Theft System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Password Learn Procedure For Anti-Theft System

  1. Password learn procedure must be performed if Powertrain Control Module (PCM) is replaced. A password is communicated between Body Control Module (BCM) and PCM to provide engine operation. If PCM is replaced, the PCM must learn the password from the BCM. If password learn procedure is not performed a Diagnostic Trouble Code (DTC) may be set in the PCM when attempting to start engine.
    NOTE: Ensure battery is fully charged before proceeding. Performing this procedure will cause a DTC P1630 to be set in the PCM. It will be necessary to use scan tool to check for DTC P1630 when performing this procedure.
  2. Turn ignition switch to ON position with engine off for 11 minutes. Turn ignition switch to OFF position for 30 seconds.
  3. Turn ignition switch to ON position with engine off for 11 minutes. Turn ignition switch to OFF position for 30 seconds.
  4. Turn ignition switch to ON position with engine off for 11 minutes or until DTC P1630 is set. Turn ignition switch to OFF position for 30 seconds.
  5. Turn ignition switch to ON position with engine off for 30 seconds.
scientia non olet · About LEMON Manuals