LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1998 >> SW1 Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Miscellaneous Controls >> Transmission >> Converter Clutch Actuator
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Converter Clutch Actuator

  1. Disconnect transaxle harness connector. Measure resistance across actuator terminals "E" and "K". See Fig 1 . Resistance should be 4-6 ohms with fluid temperature about 68-122°F (20-50°C). If resistance is not as specified, go to next step.
  2. Remove actuator connector plate. Check resistance across actuator terminals. Resistance should be 4-6 ohms with fluid temperature about 68-122°F (20-50°C). If resistance is not as specified, replace actuator. If resistance was okay, replace actuator connector plate.
Fig 1: Converter Clutch Schematic
G95I12565Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals