LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1998 >> SW2 Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pressure Regulator >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Regulator: Removal

  1. Fuel pressure filter/regulator is located under vehicle, on left front side of fuel tank. Relieve fuel pressure. See FUEL PRESSURE RELIEF  . Disconnect negative battery cable. Raise and support vehicle. Remove 2 fuel filter/pressure regulator bracket screws.
    CAUTION: DO NOT damage fuel line bundle retaining clip. If retaining clip is damaged, fuel tank must be replaced. Retaining clip cannot be serviced separately.
  2. Unlatch fuel line bundle retaining clip on left side of fuel tank. Disconnect EVAP purge line at 90-degree quick-connect. Slide filter/regulator outlet out of support on fuel tank bracket. Disconnect fuel feed line at 90-degree quick-connect.
  3. Pivot filter/regulator down while moving mounting bracket out from under chassis brake lines. Disconnect fuel feed and return lines at quick-connect fitting on filter/regulator. DO NOT remove filter/regulator from bracket. Filter/regulator and bracket are serviced as an assembly.
scientia non olet · About LEMON Manuals