LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1998 >> SW2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Computer Relearn Procedures) >> Relearn Procedures >> Computer Relearn Procedures >> TP Sensor Learn (Corvette)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TP Sensor Learn (Corvette)

WARNING: This page does not describe the selected car, but rather 65 other vehicles, including the 1997 Saturn SW2, 1997 Saturn SW1, 1997 Saturn SL2, 1997 Saturn SL1, and 1997 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.

If a NEW TP sensor or throttle body is installed, EBTCM must learn new TP sensor idle position voltage. This procedure is necessary to ensure effective engine torque reduction during ASR operations. TP sensor learn procedure requires a Tech 1 scan tester or T-100 (CAMS) unit.

  1. Turn ignition off. Connect Tech 1 scan tester with a Mass Storage cartridge. Turn ignition on. Select ABS/ASR feature from menu.
  2. Select F5 (TP SENSR LEARN). Press up arrow to begin learn procedure. Wait for Tech 1 scan tester to indicate COMPLETE. Turn ignition off. Disconnect Tech 1 scan tester.
NOTE: Ensure accelerator and brake pedals are free from any obstructions while performing TP sensor/idle learn procedure. PCM will not perform learn function with accelerator pedal or brake pedal obstructions.
scientia non olet · About LEMON Manuals