Electronically Erasable Programmable Read Only Memory (EEPROM) Programming
- The replacement Powertrain Control Module (PCM) comes with the EEPROM already programmed. However, the PCM must be programmed, with proper immobilizer signal for anti-theft system before the vehicle will start. See appropriate ANTI-THEFT SYSTEM article in ACCESSORIES & EQUIPMENT for programming immobilizer signal.
- Once PCM is programmed, perform powertrain On-Board Diagnostic (OBD) system check. See POWERTRAIN ON-BOARD DIAGNOSTIC (OBD) SYSTEM CHECK in the appropriate TESTS W/CODES article in ENGINE PERFORMANCE.